Gold(III) iminophosphorane complexes as catalysts in C-C and C-O bond formations

The reaction of K[AuCl₄] with AgClO₄ and iminophosphorane ligands (N,N-IM) Ph₃PNR [R = CH₂-2-NC₅H₄ (1), C(O)-2-NC₅H₄ (2)] or Ph₂PyPNR [Py = -2-NC₅H₄; R = Ph (3), C(O)Ph (4)] (mol ratio 1:2.2:1) in acetonitrile affords complexes [AuCl₂(N,N-IM)]ClO₄ (5-8). These compounds are air- and moisture-stable and they have been evaluated in two types of catalytic processes. They have been found to be effective catalysts in the addition of 2-methylfuran or azulene to methyl vinyl ketone, as well as in the synthesis of 2,5-disubstituted oxazoles from N-propargylcarboxamides. The reactions proceed in mild conditions and with similar yields to those described for AuCl₃. Using this method, oxazoles bearing a thiophene functional group 2-(2′-thienyl)-5-methylthiazole can be prepared in excellent yields. In all cases the intermediate 5-methylene-4,5-dihydroxazole can be observed by ¹H NMR.     

Gold(III) (C^N) complex-catalyzed synthesis of propargylamines via a three-component coupling reaction of aldehydes, amines and alkynes

Propargylamines are synthesized in high yields via a gold(III) (C^N) complex-catalyzed three-component coupling reaction of aldehydes, amines and alkynes in water at 40 °C. Excellent diastereoselectivities (up to 99:1) have been achieved when chiral prolinol derivatives are employed as the amine component. Notably, the [Au(C^N)Cl₂] complex (N^CH = 2-phenylpyridine) could be repeatedly used for 10 reaction cycles, leading to an overall turnover number of 812.     

Palladium‐catalysed Suzuki cross‐coupling of primary alkylboronic acids with alkenyl halides

The Suzuki reaction of primary alkylboronic acids with alkenyl halides proceeds nicely using the air‐stable catalyst PdCl(C₃H₅)(dppb), Cs₂CO₃ as base and toluene or xylene as solvent. A minor effect of the substituent position of the alkenyl bromide was observed. Quite similar yields were observed in the presence of α‐ or β‐substituted alkenyl bromides such as 2‐bromobut‐1‐ene or 1‐bromo‐2‐methylprop‐1‐ene with this catalyst. This reaction proceeded with a variety of alkylboronic acids such as 2‐phenylethylboronic acid or n‐octylboronic acid. Lower yields of coupling products were obtained in the presence of an alkenyl chloride. Copyright © 2008 John Wiley & Sons, Ltd.     

Gold(I) Complexation with Trialkyl/Triaryl Phosphine Selenide Ligands

Abstract

A number of phosphine selenide ligands and their gold(I) complexes of general formula R₃P?Se?Au?X (where X is Cl^?, Br^? and CN^? and R = phenyl, cyclohexyl and tolyl) were prepared. The complexes were characterized by elemental analysis, IR and ³¹P NMR spectroscopic methods. In the IR spectra of all complexes a decrease in frequency of P?Se bond upon coordination was observed, indicating a decrease in P?Se bond order. ³¹P NMR showed that the electronegativity of the substituents is the most important factor determining the ³¹P NMR chemical shift. It was observed that phosphorus resonance is more downfield in alkyl substituted phosphine selenides, as compared to the aryl substituted ones. Ligand disproportionation in the complex Cy₃P?SeAuCN in solution to form [Au(CN)₂]^? and [(Cy₃P?Se)₂Au]⁺ was investigated by ¹³C and ¹⁵N NMR spectroscopy.     

Ruthenium(III) catalysed oxidation of l-leucine by a new oxidant,diperiodatoargentate(III) in aqueous alkaline medium

The kinetics of Ru(III) catalysed oxidation of l-leucine by diperiodatoargentate(III) (DPA) in alkaline medium at 298 K and a constant ionic strength of 0.60 mol dm⁻³ was studied spectrophotometrically. The oxidation products are pentanoic acid and Ag(I). The stoichiometry is [l-leucine]:[DPA] = 1:2. The reaction is of first order in Ru(III) and [DPA] and has less than unit order in both [l-leu] and [alkali]. The oxidation reaction in alkaline medium has been shown to proceed via a Ru(III)–l-leucine complex, which further reacts with one molecule of monoperiodatoargentate(III) (MPA) in a rate determining step followed by other fast steps to give the products. The main products were identified by spot test and spectral studies. The reaction constants involved in the different steps of the mechanism are calculated. The catalytic constant (K_c) was also calculated for the Ru(III) catalysed reaction at different temperatures. From the plots of log K_c versus 1/T, values of activation parameters with respect to the catalyst have been evaluated. The activation parameters with respect to the slow step of the mechanism are computed and discussed, and thermodynamic quantities are also determined. The active species of catalyst and oxidant have been identified.     

Syntheses,Characterization and x-ray Structures of Gold(III) Complexes Obtained by Addition of Bases to Gold(III)(2-Pyridinecarboxaldehyde)

Reaction of potassium tetrachloroaurate(III), KAuCl₄, with 2-pyridinecarboxaldehyde (2CHO-py) have been examined in protic HX (X=OH, OMe, OEt, OCH₂CH₂CH₂, OCH₂CH₂CH₂CH₃, OCH₂CF₃) solvents. Compounds in which the pyridine ligand is N or N-O coordinated in a newly carbonyl hydrated or in semi- and acetal-forms, derived by addition of one or two hydroxylic molecules, have been isolated; these include dichloro[pyridine-2(α-hydroxymethanolato)]gold(III) (1), dichloro[pyridine-2(α-ethoxymethanolato)] gold(III) (2), dichloro[pyridine-2[α-(2,2,2-trifluoroethoxymethanolato)]gold(III) (3), trichloro(2-pyridinecarboxaldehyde dimethyl acetal)gold(III) (4), trichloro(2-pyridinecarboxaldehyde diethyl acetal)gold(III) (5), trichloro(2-pyridinecarboxaldehyde di-1-propyl acetal)gold(III) (6) and trichloro(2-pyridinecarboxaldehyde di-1-butyl acetal)gold(III) (7). The crystal and molecular structures of (2), (5) and (7) have been determined by X-ray methods. Compound (2) crystallizes in space group Pna2₁ with Z=4, a=7.8914(4), b=17.3660(4) and c=8.3873(5)Å; (5) crystallizes in space group P&1macr; with Z=2, a=7.7779(3), b=8.2878(2) and c=13.3202(6)Å, α=96.975(2), β=95.096(2), γ=115.027(2)°; (7) crystallizes in space group P2₁/a with Z=4, a=14.5438(12), b=8.9865(7) and c=15.0362(11)Å.     

X‐Ray Crystal Structures and Quantum Chemical Calculations of Tetraphenyl‐arsonium Tetraazidoaurate(III) and Azido(triphenylphosphine)Gold(I)

The single crystal X‐ray structure determinations are reported for [Ph₄As][Au(N₃)₄] ( 1 ) and Ph₃PAuN₃ ( 2 ). Compound 1 is an ionic species with a “windmill” shaped anion. It crystallizes in the monoclinic space group C2/c, a = 18.396(2), b = 6.2492(4), c = 23.555(2) Å; β = 107.98(1)°, Z = 4, R1_{(all data)} = 0.0227, wR2 = 0.0374. The lattice parameters of compound 2 , which crystallizes in the orthorhombic space group P2₁2₁2₁, are a = 10.9252(1), b = 11.5642(1), c = 13.0993(1) Å; Z = 4, R1_{(all data)} = 0.0176, wR = 0.0334. The experimentally obtained X‐ray data and vibrational frequencies of both compounds were compared with those calculated at B3LYP/LANL2DZ and B3LYP/SDD level of theory and for 1 also at the MP2/SDD level.     

Flexible,dicationic imidazolium salts for in situ application in palladium‐catalysed Mizoroki–Heck coupling of acrylates under aerobic conditions

The synthesis, characterization and in situ catalytic performance of new unsymmetric N,N′‐disubstituted imidazolium‐based dicationic salts in Mizoroki–Heck coupling of acrylates with aryl bromides under aerobic conditions are described. A series of flexible dicationic salts with varying steric and electronic properties were synthesized in good to excellent yields. All the salts were well characterized using spectroscopic techniques. X‐ray diffraction analysis of two salts with the same dicationic backbone and different counter anions shows that the ligand adopts two different conformations which are influenced by the nature of the anion. Thus, the ligand is capable of changing its conformation according to the change in environment due to its flexible nature. All the synthesized imidazolium salts were found to be active in in situ palladium‐catalysed Mizoroki–Heck coupling under aerobic conditions. Amongst the salts, the hydroxyl‐functionalized imidazolium salt, incorporating the features of both bidentate chelating O,O ligand and carbene, shows the maximum catalytic activity. A variety of aryl and heteroaryl methyl and ethyl cinnamates were synthesized using these imidazolium salts as preligands. In addition, NMR studies confirm in situ generation of normal N‐heterocyclic carbenes from the C‐2 position of imidazol‐2‐ylidene ring. The mercury poisoning test was also performed to ascertain the nature of catalytically active palladium species. Aerobic conditions, low catalytic loading (0.5 mol%), shorter reaction times, broad functional group tolerance and good to excellent isolated yields are some of the significant features of the novel catalytic systems described here. Copyright © 2016 John Wiley & Sons, Ltd.     

Gold and platinum catalyzed cascade reaction of propargyl acetates bearing terminal alkynes or methyl ketones

A gold (III)-catalyzed cascade reaction of propargyl acetates bearing an extra terminal alkyne (1) afforded γ-keto esters 3 and lactones 4. These products should be generated through allenyl ketone intermediate B via a 1,2-acyloxy cyclization/fragmentation/cycloisomerization/hydrolysis sequence. On the other hand, the cascade reaction of α-acetoxy ketones bearing terminal alkynes 5 afforded lactone 6 via allenyl ketone intermediate A. This reaction involves a [3,3]-sigmatropic acyloxy rearrangement/cycloisomerization/hydrolysis sequence.     

Co(III)/Zn(II)-catalyzed dearomatization of indoles and coupling with carbenes from ene-yne ketones via intramolecular cyclopropanation

A straightforward and efficient protocol for dearomatizing indoles is described. The reaction, catalyzed by an inexpensive Co(III)/Zn(II) catalyst, starts from easily accessible N-pyrimidinyl indoles and ene-yne ketones. Mild reaction conditions, high diastereoselectivity, a broad substrate scope, effective functional group tolerance, and reasonable to remarkable yields were observed.     

Catalysis and mechanistic studies of ruthenium and osmium on synthesis of anthranilic acids

Ruthenium, osmium and ruthenium + osmium catalyzed synthetic methodology was developed for the synthesis of anthranilic acids from indoles in good to excellent yields using bromamine‐B in alkaline acetonitrile–water (1:1) at 313 K. Detailed catalysis studies of ruthenium, osmium and the mixture of both were carried out for the synthetic reactions. The positive synergistic catalytic activity of Ru(III) + Os(VIII) was observed to a large extent with the activity greater than the sum of their separate catalytic activities. Detailed kinetic and mechanistic investigations for each catalyzed reactions were carried out. The kinetic pattern and mechanistic picture of each catalyzed reaction were found to be different for each catalyst and to obey the underlying rate laws: where, x, y < 1. The reactions were studied at different temperatures and the activation parameters were evaluated for each catalyzed reaction. Under the identical set of experimental conditions, the kinetics of all the three catalyzed reactions were compared with uncatalyzed reactions, revealing that the catalyzed reactions were 6‐ to 42‐fold faster. The catalytic efficiency of aforementioned catalysts followed the order: Ru(III) + Os(VIII) > Os(VIII) > Ru(III). This trend may be attributed to the different d‐electronic configuration of the catalysts. The proposed mechanisms and the rigorous kinetic models derived give results that fit well with the experimental data in each catalyzed reaction. Copyright © 2010 John Wiley & Sons, Ltd.     

Gold nanoparticle/alkanedithiol conductive films self-assembled onto gold electrode: Electrochemistry and electroanalytical application for voltammetric determination of trace amount of catechol

This paper describes novel electrochemical properties of gold nanoparticles/alkanedithiol conductive films and their electroanalytical applications for voltammetric determination of trace amount of one kind of environmental pollutants, catechol. The conductive films are prepared by closely packing 12-nm diameter gold nanoparticles (Au-NPs) onto Au electrodes modified with the self-assembled monolayers (SAMs) of alkanedithiols (i.e., HS(CH₂)_nSH, n = 3, 6, 9). The assembly of the Au-NPs onto the SAM-modified electrodes essentially restores the heterogeneous electron transfer between Au substrate and redox species in solution phase that is almost totally blocked by the SAMs and, as a result, the prepared Au-NP/SAM-modified electrodes possess a good electrode reactivity without a remarkable barrier toward the heterogeneous electron transfer. Moreover, the prepared Au-NP/SAM-modified electrodes are found to exhibit a largely reduced interfacial capacitance, compared with bare Au electrode. These electrochemical properties of the Au-NP/SAM-modified electrodes essentially make them very useful for electroanalytical applications, which is illustrated by voltammetric determination of trace amount detection of environmental pollutant, catechol.     

Gold(I)-catalyzed direct C-H arylation of pyrazine and pyridine with aryl bromides

An efficient procedure for the direct C-H arylation of electron-poor aromatics such as pyrazine and pyridine with aryl bomides is described. In the presence of catalytic amount of Cy₃PAuCl and with the use of t-BuOK as base, pyrazine undergoes the direct C-H arylation with aryl bromides at 100 °C, and the yields of the arylated products depend on the nature of aryl bromides. In the cases of electron-rich aryl bromides used, the arylated pyrazines can be obtained in good to high yields. For electron-poor aryl bromides, the addition of AgBF₄ is the crucial point to accelerate the coupling reaction to give the arylated products in moderate yields. Pyridine also reacts with electron-rich aryl bromides catalyzed by Cy₃PAuCl to give a mixture of arylated regioisomers in moderate yield. However, in order to realize the direct C-H arylation of pyridine with electron-poor aryl bromides, the addition of silver salt as additive and a milder reaction temperature (60 °C) are required.     

Gold(III) adducts of 2-vinyl- and 2-ethylpyridine and cyclometallated derivatives of 2-vinylpyridine: Crystal structure of the cyclometallated derivative [Au(k-C,N-CH2CH(Cl)-C5H4N)(PPh3)Cl][PF6]

Reaction of Na[AuCl₄] with 2-vinylpyridine (vinpy) and 2-ethylpyridine (etpy) affords the N-bonded adducts Au(Rpy)Cl₃ (R = CH₂CH, vinpy; CH₃CH₂, etpy). Cationic adducts, [Au(vinpy)₂Cl][X]₂ (X = BF₄, PF₆) and [Au(etpy)₂Cl₂][BF₄], were also obtained by reaction of Au(Rpy)Cl₃ with Rpy (1:1) and excess NaBF₄ or KPF₆. Thermal activation of Au(vinpy)Cl₃ in water gives the five-membered cycloaurated derivative [Au(k²-C,N-CH₂CH(Cl)-C₅H₄N)Cl₂] formally resulting through a trans nucleophilic addition of a chloride onto the CC bond. No cyclometallated derivatives are obtained by reactions of Au(etpy)Cl₃. An X-ray crystal structure determination on the PPh₃ derivative [Au(k²-C,N-CH₂CH(Cl)-C₅H₄N)(PPh₃)Cl][PF₆] was carried out.     

Osmium(VIII) catalysed and uncatalysed oxidation of aspirin drug by diperiodatocuprate(III) complex in aqueous alkaline medium: A mechanistic approach

The kinetics of oxidation of a non-steroidal analgesic drug, aspirin (ASP) by diperiodatocuprate(III)(DPC) in the presence and absence of osmium(VIII) have been investigated at 298 K in alkaline medium at a constant ionic strength of 0.10 mol dm⁻³ spectrophotometrically. The reaction showed a first-order in [DPC] and less than unit order in [ASP] and [alkali] for both the osmium(VIII) catalysed and uncatalysed reactions. The order with respect to Os(VIII) concentration was unity. The effects of added products, ionic strength, periodate and dielectric constant have been studied. The stoichiometry of the reaction was found to be 1:4 (ASP:DPC) for both the cases. The main oxidation product of aspirin was identified by spot test, IR, NMR and GC–MS. The reaction constants involved in the different steps of the mechanisms were calculated for both reactions. Activation parameters with respect to slow step of the mechanisms were computed and discussed for both the cases. The thermodynamic quantities were also determined for both reactions. The catalytic constant (K_C) was also calculated for catalysed reaction at different temperatures and the corresponding activation parameters were determined.     

Gold Nanoparticle Based Fluorescence Resonance Energy Transfer Immunoassay for the Detection of the Histone Deacetylase Activity using a Fluorescent Peptide Probe

A novel platform for detection of histone deacetylase (HDAC) activity has been developed using a gold nanoparticle based fluorescence resonance energy transfer (FRET) immunoassay. This strategy combined the acetylated fluorescent peptide probe with the anti-acetyl antibody functionalized Au NPs to measure the deacetylation activity of histone deacetylase sirtuin2. Enzymatic deacetylation of the acetylated peptide substrate was detected by a gold nanoparticle labeled anti-acetyl peptide antibody with the formation of the immunocomplex resulting in energy transfer between the fluorescent dyes and the nanoparticles. Due to the highly efficient fluorescence quenching of the gold nanoparticles, the proposed method shows a low background and favorable sensitivity. In addition, this approach can be applied to the evaluation of HDAC inhibitor activity. The proposed platform should facilitate the development of new assays for HDAC activity and other histone modifications.     

Au(I)/手性双功能叔胺催化实现的一锅法串联成烯/不对称环化反应构建螺环季碳氧化吲哚

研究报道了Au（I）/手性叔胺串联催化实现的一锅法不对称反应,实现从重氮氧化吲哚和氟代烯醇硅醚出发构建螺环季碳氧化吲哚.反应的第一步是3.0 mol% IPrAuBF₄催化的重氮氧化吲哚与单氟烯醇硅醚的交叉偶联反应,现场产生N-Ac保护的3-烯基氧化吲哚在手性叔胺-四方酸C1的催化下与N-Ts邻氨基查尔酮再发生不对称Michael/Michael反应,以中等到良好的产率以及对映选择性,>20：1的非对映选择性得到螺环季碳氧化吲哚.反应的关键一步是Au（I）催化的给体-受体类重氮化合物与三取代单氟烯醇硅醚的成烯化反应,高效构建三取代烯烃.     

电镀铂/金的金电极上As(Ⅲ)电化学行为的电化学石英晶体微天平研究

采用电化学石英晶体微天平(EQCM)技术研究了Britton-Robinson(B-R,pH=1.8～11.2)缓冲溶液和H2SO4介质中电镀铂淦的金电极上As(Ⅲ)的循环伏安行为.通过实时监测EQCM频率等参数的变化过程并利用预电沉积As(O)放大电极响应信号,考察了两电极上As.(O)的电沉积、AsⅢ皿和AsⅤ助组...     

Potentiometric Stripping of Arsenic(III) Using a Wall‐Jet Flow Cell and Gold(III) Solution as Chemical Reoxidant

In the proposed method As(III) is determined with a wall‐jet flow cell by means of potentiostatic co‐deposition of Au(III) and As(III) at a glassy‐carbon electrode and subsequent chemical stripping with Au(III). Factors affecting sensitivity and precision including acidity, Au(III) concentration, electrodeposition potential and flow rate were optimized. Optimum determination of As(III) in solutions containing 160 mg L^?1 and 1.2 M hydrochloric acid was accomplished with an electrolysis potential of ?0.1 V (vs. Ag/AgCl) and a flow rate of 0.59 mL min^?1. Different linear concentration ranges were achieved under these conditions with good precision and relative standard deviations between 6–9%. The detection limit obtained after 120 s of electrolysis was 0.55 μg L^?1.     

On the paradox of TiCl4 reducing power: pinacol coupling and two-carbon homologation of carbonyl compounds

TiCl₄/DIPEA/CH₂Cl₂ reducing system promotes pinacol coupling and/or reduction to alcohol of aromatic aldehydes and carbonyl compounds activated towards reduction by an electron withdrawing group. In addition, bis homologation of these substrates is observed. An inner-sphere electron transfer from TiCl₄ to DIPEA accounts for the products distribution.