Metal-Free Defluoroborylation of 3,3-Difluoropropenes

The defluorinative functionalization of allylic fluorides represents an attractive approach for the preparation of molecules containing a monofluoroalkene core. In that sense, introducing a “boryl nucleophile” is a powerful strategy to obtain polyvalent borylated intermediates as versatile synthetic precursors. To perform this reaction without the use of transition metals, the nucleophilic character of a diborane/fluoride system was exploited in a S_N2′ type-substitution reaction of gem-difluoropropenes to install a pinacolborane group. The use of HMDS as a silylated additive is necessary to improve the reactivity. A direct oxidation of the intermediate boronates allowed the isolation of the corresponding β-fluoroallyl alcohols in low to good yields (9–81 %). Other synthetic transformations of a (2-fluoroallyl)boronate are also illustrated.     

Polymerization of tert-alkylacetylenes by Mo- and W-based catalysts

Polymerization of three tert-alkylacetylenes (3,3-dimethyl-1-pentyne, 3,3-dimethyl-1-nonyne, 1-adamantylacetylene) by Mo- and W-based catalysts provided new polymers in virtually quantitative yields. In contrast, Ziegler catalysts did not polymerize these monomers. Every polymer had a form of white solid, and had alternating double bonds along the main chain. Though some of poly(3,3-dimethyl-1-pentyne)s contained a toluene-insoluble fraction, the polymer was totally soluble when proper polymerization conditions were chosen. The molecular weights of soluble fractions were as high as 3 × 10⁵. Poly(3,3-dimethyl-1-nonyne) was also partly insoluble in toluene, and the quantity of soluble fraction was less than that of poly(3,3-dimethyl-1-pentyne). The geometric structure of these two polymers could be controlled by the choice of suitable polymerization conditions. Poly(1-adamantylacetylene) was insoluble in any organic solvents. Copolymerization of 1-adamantylacetylene with suitable comonomers afforded soluble copolymers.     

New Reagents for the Reductive Quenching of Ozonolysis Reactions

3,3′-Thiodipropionic acid and its salts were found to be effective reductive quench reagents in the ozonolysis of olefins. They were as effective as methyl sulfide without its drawbacks. A polymer-bound form of 3,3′-thiodipropionic acid was also effective.     

3,3′‐Bi(1,2,4‐oxadiazoles) Featuring the Fluorodinitromethyl and Trinitromethyl Groups

Here we report on the preparation of two hydrogen atom free 3,3′‐bi(1,2,4‐oxadiazole) derivatives. 5,5′‐Bis(fluorodinitromethyl)‐3,3′‐bi(1,2,4‐oxadiazole) was synthesised by fluorination of diammonium 5,5′‐bis(dinitromethanide)‐3,3′‐bi(1,2,4‐oxadiazole). For our previously reported analogue 5,5′‐bis(trinitromethyl)‐3,3′‐bi(1,2,4‐oxadiazole), a new synthetic route starting from new 3,3′‐bi(1,2,4‐oxadiazolyl)‐5,5′‐diacetic acid was developed. In this course also hitherto unknown 5,5′‐dimethyl‐3,3′‐bi(1,2,4‐oxadiazole) was isolated. The compounds were characterised by multinuclear NMR spectroscopy, IR and Raman spectroscopy, elemental analysis as well as mass spectrometry. X‐ray diffraction studies were performed and the crystal structures for the 5,5'‐dimethyl and 5,5'‐(fluorodinitromethyl) derivatives are reported. The energetic 5,5'‐(fluorodinitromethyl) and 5,5'‐(trinitromethyl) compounds do not contain any hydrogen atoms and show remarkable high densities. Furthermore, the thermal stabilities and sensitivities were determined by differential scanning calorimetry (DSC) and standardised impact and friction tests. The heats of formation were calculated by the atomisation method based on CBS‐4M enthalpies. With these values and the room‐temperature X‐ray densities, several detonation and propulsion parameters, such as the detonation velocity and pressure as well as the specific impulse of mixtures with aluminium, were computed using the EXPLO5 code.     

Reactivity-selectivity study of the Friedel-Crafts acetylation of 3,3' -dimethylbiphenyl and the oxidation of the acetyl derivatives

ABSTRACT: BACKGROUND: Friedel-Crafts acetylation is an important route to aromatic ketones, in research laboratories and in industry. The acetyl derivatives of 3,3' -dimethylbiphenyl (3,3' -dmbp) have applications in the field of liquid crystals and polymers and may be oxidized to the dicarboxylic acids and derivatives that are of interest in cancer treatment. FINDINGS: The effect of solvent and temperature on the selectivity of monoacetylation of 3,3'-dmbp by the Perrier addition procedure was studied using stoichiometric amounts of reagents. 4-Ac-3,3' -dmbp was formed almost quantitatively in boiling 1,2-dichloroethane and this is almost twice the yield hitherto reported. Using instead a molar ratio of substrate:AcCl:AlCl3 equal to 1:4:4 or 1:6:6 in boiling 1,2-dichloroethane, acetylation afforded 4,4' - and 4,6' -diacetyl-3,3' -dmbp in a total yield close to 100%. The acetyl derivatives were subsequently converted to the carboxylic acids by hypochlorite oxidation. The relative stabilities of the isomeric products and the corresponding sigma-complexes were studied by DFT calculations and the data indicated that mono- and diacetylation followed different mechanisms. CONCLUSIONS: Friedel-Crafts acetylation of 3,3' -dmbp using the Perrier addition procedure in boiling 1,2-dichloroethane was found to be superior to other recipes. The discrimination against the 6-acetyl derivative during monoacetylation seems to reflect a mechanism including an AcCl:AlCl3 complex or larger agglomerates as the electrophile, whereas the less selective diacetylations of the deactivated 4-Ac-3,3' -dmbp are suggested to include the acetyl cation as the electrophile. The DFT data also showed that complexation of intermediates and products with AlCl3 does not seem to be important in determining the mechanism.     

Dense Energetic Nitraminofurazanes

3,3′‐Diamino‐4,4′‐bifurazane ( 1 ), 3,3′‐diaminoazo‐4,4′‐furazane ( 2 ), and 3,3′‐diaminoazoxy‐4,4′‐furazane ( 3 ) were nitrated in 100 % HNO₃ to give corresponding 3,3′‐dinitramino‐4,4′‐bifurazane ( 4 ), 3,3′‐dinitramino‐4,4′‐azofurazane ( 5 ) and 3,3′‐dinitramino‐4,4′‐azoxyfurazane ( 6 ), respectively. The neutral compounds show very imposing explosive performance but possess lower thermal stability and higher sensitivity than hexogen (RDX). More than 40 nitrogen‐rich compounds and metal salts were prepared. Most compounds were characterized by low‐temperature X‐ray diffraction, all of them by infrared and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and by differential scanning calorimetry (DSC). Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high energetic performances of the nitraminofurazanes as energetic materials. The sensitivities towards impact, friction, and electrostatic discharge were also explored. Additionally the general toxicity of the anions against vibrio fischeri, representative for an aquatic microorganism, was determined.     

EPR support for the ketyl radical-anion "triggered" [3,3]-sigmatropic rearrangement

New physical evidence to support a ketyl radical-anion mechanism for the [3,3]-sigmatropic rearrangement is presented. With use of EPR spectroscopy, spectra are observed that can be attributed to 8, an acyl radical-anion species resulting from a [3,3]-rearrangement; this also functions as a key intermediate in the process. The spectrum of an additional paramagnetic species resulting from further addition of tin-centered radicals to the reaction product was also observed.     

Synthesis of 3,3-dinitroazetidine from 1-t-butyl-3,3-dinitroazetidine

Treatment of 1-t-butyl-3,3-dinitroazetidine (1) with benzyl chloroformate resulted in a novel elimination of isobutylene to yield equimolar amounts of 1-(benzyloxycarbonyl)-3,3-dinitroazetidine (3) and 1-t-butyl-3,3-dinitroazetidine hydrochloride. The carbamate 3 was effectively cleaved by trifluoromethanesulfonic acid to yield 3,3-dinitroazetidinium trifluoromethanesulfonate (4) . Free 3,3-dinitroazetidine (5) has also been isolated.     

Antiproliferative, antimicrobial and apoptosis inducing effects of compounds isolated from Inula viscosa

The antiproliferative and antimicrobial effects of thirteen compounds isolated from Inula viscosa (L.) were tested in this study. The antiproliferative activity was tested against three cell lines using the MTT assay. The microdilution method was used to study the antimicrobial activity against two Gram positive bacteria, two Gram negative bacteria and one fungus. The apoptotic activity was determined using a TUNEL colorimetric assay. Scanning electron microscopy was used to study the morphological changes in treated cancer cells and bacteria. Antiproliferative activity was observed in four flavonoids (nepetin, 3,3'-di-O-methylquercetin, hispidulin, and 3-O-methylquercetin). 3,3'-di-O-Methylquercetin and 3-O-methylquercetin showed selective antiproliferative activity against MCF-7 cells, with IC(50) values of 10.11 and 11.23 μg/mL, respectively. Both compounds exert their antiproliferative effect by inducing apoptosis as indicted by the presence of DNA fragmentation, nuclear condensation, and formation of apoptotic bodies in treated cancer cells. The antimicrobial effect of Inula viscosa were also noticed in 3,3'-di-O-methylquercetin and 3-O-methyquercetin that inhibited Bacillus cereus at MIC of 62.5 and 125 μg/mL, respectively. Salmonella typhimurium was inhibited by both compounds at MIC of 125 μg/mL. 3,3'-di-O-Methylquercetin induced damage in bacterial cell walls and cytoplasmic membranes. Methylated quercetins isolated from Inula viscosa have improved anticancer and antimicrobial properties compared with other flavonoids and are promising as potential anticancer and antimicrobial agents.     

1,1,3,3-四烷基胍羰基钴离子液体:高效可循环利用的环氧化合物羰基化反应催化新材料

离子液体因其所独有的物理化学性质如蒸气压低、热稳定性好以及结构和性能的可调性等优点而备受关注.四羰基钴阴离子是多种重要均相催化反应的催化活性物种,含有四羰基钴阴离子的金属有机离子液体有效结合了羰基金属和离子液体各自的特点和优势,作为一类新颖而且重要的功能化离子液体,受到国内外研究者的青睐.2001年,Dyson等首次报道了一种室温下为液态的羰基钴金属有机离子液体[bmim][Co(CO)4],为四羰基钴阴离子离子液体的研究开创了先河.此后,有关羰基钴金属有机离子液体的催化应用研究也相继报道.目前[CnPy][Co(CO)4]以及[bmim][Co(CO)4]在环氧化合物的羰基化反应中已有报道,但该类催化剂的催化活性特别是循环使用性能有待进一步提高.胍盐具有阳离子电荷分散程度高、热稳定性和化学稳定性高、三个氮原子上的基团可以调节等特点,使得胍盐离子液体的设计、合成和应用研究受到国内外学者关注.由于其自身结构特点,氮原子上有取代氢可以和含F,O,N底物作用形成氢键,并且氮原子上取代烷基之间作用使阳离子的平面结构发生变化,使得与三个氮原子相连的碳原子处于缺电子状态,使阳离子表现出Lewis酸性.所以其在环氧化合物氢酯基化反应中可起到稳定四羰基钴阴离子以及活化环氧化合物的作用.基于此,本文以较高收率合成了四种新型的1,1,3,3-四烷基胍羰基钴金属有机离子液体:1,1-二甲基-3,3-二乙基胍羰基钴(3a),1,1-二甲基-3,3-二正丁基胍羰基钴(3b),1,1-二甲基-3,3-四亚甲基胍羰基钴(3c),1,1-二甲基-3,3-五亚甲基胍羰基钴(3d).通过红外光谱、紫外-可见光谱、1H核磁共振谱、13C核磁共振谱、高分辨质谱、差示量热扫描仪和热重分析对该类化合物进行了结构确认及性质研究.这四种催化剂,特别是3a,在环氧化合物的氢酯基化反应中表现出优异的催化性能,在无需任何助剂的情况下具有较好的催化活性及底物适用性.此外,以不同构型的环氧丙烷为反应底物,氢酯基化反应结果显示:在该催化体系作用下,产物的构型与底物保持一致,没有发生消旋.尤其值得指出的是,催化剂3a在环氧丙烷的氢酯基化反应中表现出了优异的循环稳定性能,在循环使用6次后依然可以获得较好的转化率(91%)和选择性(94%).     

Design and Catalytic Asymmetric Construction of Axially Chiral 3,3′‐Bisindole Skeletons

The first catalytic asymmetric construction of 3,3′‐bisindole skeletons bearing both axial and central chirality has been established by organocatalytic asymmetric addition reactions of 2‐substituted 3,3′‐bisindoles with 3‐indolylmethanols (up to 98 % yield, all >95:5 d.r., >99 % ee). This reaction also represents the first highly enantioselective construction of axially chiral 3,3′‐bisindole skeletons, and utilizes the strategy of introducing a bulky group to the ortho‐position of prochiral 3,3′‐bisindoles. This reaction not only provides a good example for simultaneously controlling axial and central chirality in one operation, but also serves as a new strategy for catalytic enantioselective construction of axially chiral 3,3′‐bisindole backbones from prochiral substrates.     

Highly Soluble Phenylethynyl-terminated Imide Oligomers and Thermosetting Polyimides Based on 2,2′3,3′-Biphenyltetracarboxylic Dianhydride

The properties of a series of imide oligomers were characterized according to their molecular weights, solubility, and thermal and rheological properties. This series of imide oligomers was synthesized via a two-step method using 2,2′,3,3′-biphenyltetracarboxylic dianhydride(3,3′-BPDA) and aromatic diamines as the monomers, and 4-phenylethynyl phtlialic anhydride(PEPA) as the end-capping agent. The imide oligomers based on 3,3′-BPDA showed excellent solubility in low boiling point solvents and low melt viscosity, which were attributed to their unique bent architectures. High-performance thermosetting polyimides were produced from these oligomers via thermal crosslinking of the phenylethynyl groups. The mechanical and thermal properties of the thermosets were studied using tensile testing, dynamic mechanical thermal analysis(DMTA), and thermogravimetric analysis(TGA). The 3,3′EPDA-based thermosets exhibited excellent thermal properties, with glass transition temperatures of up to 455℃, and 5% mass loss temperatures of up to 569℃ in air. The thermosets based on 3,3-BPDA showed superior thermal properties compared to those derived from TriA-X series oligomers.     

KI-Mediated Chlorine Gas-Free Synthesis of 3,3-Dichloro-2-oxindole Derivatives

An efficient and environmentally friendly methodology for 3,3-dichlorination and 2-oxidation of indole derivatives is described. Using KI as promotor, MCl (M=K, Na) as chlorine source, and oxone as oxidant, the reaction proceeds smoothly affording various functionalized 3,3-dichloro-2-oxindoles in moderate to excellent yields. This strategy can also be extended to 3-substituted indoles. With a broad substrate scope, it is a practical approach to 3,3-disubstituted-2-oxindoles.     

Syntheses of Bissydnone Derivatives and Studies of Their Biological Activities

A new method to prepare 3,3′-ethylenebissydnone (40%), 3,3′-tetramethylenebissydnone (37%) and 3,3′-hexamethylenebissydnone (43%) from the corresponding alkylene diamine with paraformaldehyde and potassium cyanide were investigated. Some new bissydone: ?3,3′-trimethylenebissydnone (6%), 3,3′-(4,4′-diphenyl)bissydnonylmethane (9%) and 3,3′-(4,4′-diphenyi)bissydnonyl ether (28%) were synthesized from the corresponding diamine, paraformaldehyde, sodium bisulfite and potassium cyanide. Biological test of 3,3′-(4,4′-diphenyl)bissydnonylmethane shows significant response for coronary dilgtion test, inhibition of collagen induced platelet aggregation and moderate carditropic response. 3,3′-(4,4′-Diphenyl)bissydnonyl ether also shows inhibition of collagen induced platelet aggregation and moderate carditropic response.     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene. I. 3,3-Dimethyl-1,2-bis(tert-butyl)cyclopropene

The geometrical parameters of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene were optimised completely at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* force field was calculated and scaled using Pulay's scaling procedure. The set of 17 scale factors (for a 105-dimensional problem) was compiled from the sets obtained previously for 3,3-dimethyl-1-butene and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The vibrational problem was solved using the scaled quantum mechanical force field (QMFF) and assignments of the vibrational frequencies of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene were considered in comparison with the known assignments of 3,3-dimethyl-1-butene and 3,3-dimethylcyclopropene. Assignments of four experimental IR bands of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene given in the literature are suggested.     

Enzymatic sulfation of quercetin by arylsulfotransferase from a human intestinal bacterium

A novel type of arylsulfotransferase was partially purified from human intestinal bacteria and its enzymatic properties were examined. Polyphenols such as chalcone, xanthone and flavonoid were found to be sulfated by the bacterial arylsulfotransferase though the sulfation activity varied depending upon the positions of the hydroxyl groups. Quercetin, as an example of a flavonol, was rapidly sulfated when p-nitrophenyl sulfate (PNS) was taken as a donor substrate. At a ten-fold molar excess of PNS over quercetin, two products, the 3,3'-disulfate and 3,3',7-trisulfate derivatives, were formed, but the 4'- and 5-hydroxyl groups were not sulfated. In the case of equimolar or two-fold molar excess of PNS to quercetin, only the 3,3'-disulfate was produced and no monosulfate was formed. The enzymatic procedure is useful as a specific and convenient method for the preparation of polyphenol sulfate esters.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

Synthèse d'analogues azotés d'esters chrysanthémiques et pyréthriques

3,3-Dimethyl-2-vinyl-l-ethoxycarbonylaziridines were prepared from 2-acylaziridines and phosphoranes, phosphonate or silyl anions. A 3,3-di-methyl-2-ethoxycarbonyl N-vinylaziridine was also prepared. These compounds constitute some analogues of chrysanthemic and pyrethric acid esters.     

不同比例的s-BPDA/i-BPDA型聚酰亚胺共聚结构与性能关系

由不同比例的二酐单体3,3′,4,4′-联苯四酸二酐(s-BPDA)/2,2′,3,3′-联苯四酸二酐(i-BPDA)与二胺单体4,4′-二氨基二苯醚(4,4′-ODA)制得了一系列共聚可溶聚酰亚胺. 采用DSC 、TGA和拉伸等测试方法对所得共聚聚酰亚胺进行了表征, 实验结果表明, 所得聚酰亚胺具有优异的力学性能和热稳定性, 并且随着i-BPDA含量的增加, 聚酰亚胺的溶解性提高, 玻璃化转变温度(Tg)升高, 中间体聚酰胺酸的固有黏度降低.     

Synthesis and Properties of Brominated 6,6'-Dimethyl-[2,2'-bi-1H-indene]-3,3'-diethyl-3,3'-dihydroxy-1,1 '-diones

Photochromic 6‐bromomethyl‐6′‐methyl‐[2,2′‐bi‐1H‐indene]‐3,3′‐diethyl‐3,3′‐dihydroxy‐1,1′‐dione ( 2 ), 6,6′‐ bis(bromomethyl)‐[2,2′‐bi‐1H‐indene]‐3,3′‐diethyl‐3,3′‐dihydroxy‐1,1′‐dione ( 3 ) and 6,6′‐bis(dibromomethyl)‐[2,2′‐ bi‐1H‐indene]‐3,3′‐diethyl‐3,3′‐dihydroxy‐1,1′‐dione ( 4 ) have been synthesized from 6,6′‐dimethyl‐[2,2′‐bi‐1H‐ indene]‐3,3′‐diethyl‐3,3′‐dihydroxy‐1,1′‐dione ( 1 ). The single crystal of 4 was obtained and its crystal structure was analyzed. The results indicate that in crystal 4 , molecular arrangement is defective tightness compared with its precursor 1 . Besides, UV‐Vis absorption spectra in CH₂Cl₂ solution, photochromic and photomagnetic properties in solid state of 2 , 3 and 4 were also investigated. The results demonstrate that when the hydrogen atoms in the methyl group on the benzene rings of biindenylidenedione were substituted by bromines, its properties could be affected considerably.