Synthesis and Structures of [Mo12E16(PEt3)10] (E = S,Se)

Dodecanuclcar cluster complexes [Mo₁₂S₁₆(PEt₃)₁₀] 1 and [Mo₁₂Se₁₆(PEt₃)₁₀] 2 have been prepared by the reactions of [Mo₆S₈(PEt₃)₆] with sulfur or [Mo₆Se₈(PEt₃)₆] with Cp₂TiSe₅, respectively, in toluene at refluxing temperature. The structures have been determined at 173 K by X-ray crystallography. The compound 1 ·3CHCl₃ crystallizes in the triclinic space group $ {\rm P}\bar 1 $, with a = 14.859(5) Å, b = 15.868(4) Å, c = 14.200(7) Å, α = 100.58(3)°, β = 117.58(3)°, γ = 79.53(2)°, V = 2899(1) ų, and Z = 1. Full-matrix least-squares refinement using 9016 observed reflections (I_o > 2σ(I_o)) gave R = 0.056, and R_w = 0.045. The data for 2 ·2CHCl₃ are: triclinic, $ {\rm P}\bar 1 $, a = 15.737(4) Å, b = 18.763(9) Å, c = 13.062(4) Å, α = 102.45(3)°, β = 128.54(2)°, γ = 69.49(3)°, V = 2825 ų, Z = 1, R = 0.096, and R_w = 0.120 for 5922 reflections (I_o > 2σ(I_o)). The cluster complexes 1 and 2 have two octahedral molybdenum cluster units linked by the rhomboidal intercluster Mo₂(μ₄-E)₂ bonding. The intercluster Mo—Mo distances in 1 are 3.419 Å and 2 3.551 Å. The cyclic voltammetry of 1 and 2 shows two oxidation and two reduction steps separated as large as 380–490 mV. The UV-Vis spectra of the dodecanuclear cluster complexes 1 and 2 have an extra weak band at around 744 nm which is absent in the starting octahedral cluster complexes.     

以MOFs为前驱体的多孔金属氧化物催化剂研究进展

多孔金属氧化物具有高比表面积、大孔径、特殊的形貌和结构特性,广泛应用于催化、锂离子电池、太阳能电池、气敏传感器等领域。金属有机骨架材料(MOFs)是一类具有周期性网络结构的新型多孔晶体材料,在气体存储、气体分离、催化等领域具有重要的应用价值。近年来,以MOFs为前驱体制备多孔碳和多孔金属氧化物成为MOFs应用领域一个新的研究热点。本文主要综述了以MOFs为前驱体制备的多孔金属氧化物和多孔金属氧化物/碳复合物在CO氧化、催化产氢、异丁烷脱氢、环已烯氧化、醇直接氧化为酯、醛氧化酰胺化反应、光催化降解有机物和氧还原反应等方面的应用。     

手性金属催化剂在不对称环丙烷化反应中的应用进展

手性金属催化剂在不对称环丙烷化反应中的应用一直是不对称合成领域的一个热点。对三十多年来的这一领域的手性金属催化剂的发展作了详细的归纳和评述。     

Recognition of toroidal and spheroidal geometry in metal clusters

For some categories of Pt and Au cluster compounds, a simple electron count theory is successful in predicting its structure. Six or eight cluster valence electrons correspond to toroidal or spherical structures, respectively. As the characterization of more complex clusters as toroidal and spheroidal may seem to be somewhat arbitrary, an objective method for classifying the geometry is developed. From atom position coordinates, a numerical parameter can be calculated which gives unambiguous indication of the geometry. It is shown that there is a perfect correlation between this parameter and the electron count.     

Aerobic oxidative homocoupling reaction of anilides using heterogeneous metal catalysts

We have developed a heterogeneous catalytic oxidative homocoupling reaction of dimethoxyanilides under an oxygen atmosphere. The resulting homo-dimers are useful for the construction of heterocycles, demonstrating the potential of heterogeneous metal catalysts.     

Selective alcohol oxidation to aldehydes and ketones over base-promoted gold–palladium clusters as recyclable quasihomogeneous and heterogeneous metal catalysts

Bimetallic gold–palladium clusters, with an average size of 1.9 nm and composed of 80 mol% gold, proved to be highly active and selective metal catalysts for the organic phase oxidation with O₂ of aliphatic, allylic and benzylic alcohols to the corresponding carbonyl products. Polyvinylpyrrolidone stabilized gold–palladium clusters dispersed in N,N-dimethylformamide emerged as promising quasihomogeneous metal catalysts for the oxidation of benzyl alcohol to benzaldehyde with full selectivity; they could be efficiently recycled with unaffected catalytic performance by solvent-resistant nanofiltration. Highly active and durable heterogeneous catalysts for the amide phase or solvent-free alcohol oxidation were prepared by the quantitative immobilization of the optimized gold–palladium clusters on the high surface area basic BaAl₂O₄ spinel support with preservation of the bimetallic clusters’ nanodispersion.     

Advances in late transition metal catalysts for olefin polymerization/oligomerizarion

In this review article, we have consolidated our recent studies on late transition metal catalysts (mainly Fe, Co) for olefin polymerization/oligomerization. A series of bisiminopyridyl Co(II) and Fe(II) complexes were synthesized. These catalysts when activated with MAO in aromatic or aliphatic hydrocarbon solvents, oligomerize or polymerize ethylene to α-olefins or high molecular weight polymers with exceptionally high activities and selectivities. The electronic and steric effects of allyloxy and benzyloxy substituted bisiminopyridyl Fe(II) and Co(II) complexes were also investigated. The influence of catalyst structure and temperature on the polymerization activity, thermal properties and molecular weight were discussed. The effects of heterogenization of these catalysts on silica and modified SBA-15 were analyzed. The polymerization of polar monomers such as vinyl ethers and methyl methacrylate was tested and no specific trends in activity and polymer molecular weight with changes in steric bulkiness around the metal center were observed with the same catalyst system.     

The hydrodesulfurization activity and characterization of cobalt Chevrel phase sulfides

Hydrodesulfurization activity of cobalt Chevrel phase sulfide catalysts has been investigated in a fixed-bed flow reactor. Single phase cobalt Chevrel phase sulfides exhibited catalytic activity for hydrodesulfurization. Supported cobalt Chevrel phase sulfides catalysts indicated much higher hydrodesulfurization activity and even higher than commercial CoMoS/Al₂O₃ catalysts. The existence of Mo₆S₈ and the reduced oxidation state of Mo in the cobalt Chevrel phase sulfides has been observed by XRD, LRS, and XPS. This revised version was published online in August 2006 with corrections to the Cover Date.     

A series of three-dimensional coordination polymers with general formula [{Ln(H2O)n}{Re6Te8(CN)6}] · xH2O (Ln = Eu,Gd, Tb,Dy, Ho,Er, Tm,Yb; n = 3, 4, x = 0, 2.5)

A series of new compounds containing rare earth cations (Eu to Yb) and paramagnetic cluster anion [Re₆Te₈(CN)₆]³⁻ was prepared and investigated. The X-ray structural analyses have revealed that the compounds [{Ln(H₂O)₄}{Re₆Te₈(CN)₆}] · 2.5H₂O; Ln = Eu (1), Tb (3), Dy (4), Ho (5), Er (6), Tm (7), [{Gd(H₂O)₃}{Re₆Te₈(CN)₆}] · 2.5H₂O (2) and [{Yb(H₂O)₄}{Re₆Te₈(CN)₆}] (8) are three-dimensional polymers based on Re–CN–Ln interactions. Measurements of magnetic susceptibility for 2 and 5 showed that effective magnetic moment (at 300 K) was 8.13 μ_B for compound 2 and 10.79 μ_B for compound 5 with weak antiferromagnetic ordering appeared at low temperatures.     

几种金属盐催化剂对苯甲醛肟重排生成苯甲酰胺的催化作用

考察了SnCl2,CdCl2,Cr(CH3COO)3,Cr(NO3)3四种金属盐对苯甲醛肟重排生成苯甲酰胺反应的催化作用;以SnCl2作为模型催化剂,探讨了催化剂用量、反应温度及反应时间等因素对产率的影响,确定了最佳反应条件.结果表明,SnCl2对苯甲醛肟重排生成苯甲酰胺反应的催化效率最高;最佳反应条件为:n(SnCl2)∶n(苯甲醛肟)=2∶5,反应温度110℃,反应时间19h,相应的苯甲酰胺产率达57.6%.     

有序多孔过渡金属氧化物及其负载贵金属催化剂对挥发性有机物氧化的催化性能

大部分的挥发性有机物(VOCs)污染环境,危害人身健康.目前,我国虽然已开展了治理 VOCs污染的工作,但还缺乏有效的、拥有自主知识产权的 VOCs治理技术,因此研发新型高效 VOCs处理技术迫在眉睫.催化氧化法是公认的最有效消除 VOCs的途径之一,而高性能催化剂的研发是实现该过程的关键.近年来,人们围绕消除 VOCs的高效且价廉的催化剂的研发开展了卓有成效的工作,许多过渡金属氧化物、混合或复合金属氧化物及其负载贵金属催化剂均被认为是有效的催化氧化材料.与体相材料相比,多孔材料具有发达的孔道结构和高的比表面积,一方面有利于反应物的扩散、吸附和脱附,因而具有更高的催化活性和选择性;另一方面有利于活性组分(如贵金属等)在多孔材料表面的高分散,抑制活性组分的烧结,因而具有更好的催化稳定性.本文简述了近年来多孔金属氧化物在环境污染物消除领域的研究进展,阐述了以有序介孔或大孔过渡金属氧化物、钙钛矿型氧化物和负载贵金属催化剂的制备及其对典型 VOCs(如苯系物、醇类、醛类及酮类等)氧化的催化性能,重点介绍了四类催化材料,包括有序介孔过渡金属氧化物或复合氧化物(Co3O4, MnO2, Fe2O3, Cr2O3和 LaFeO3等)催化剂,有序介孔金属氧化物负载贵金属(Au/Co3O4, Au/MnO2和 Pd/Co3O4等)催化剂,三维有序大孔过渡金属氧化物或复合氧化物(Fe2O3, LaMnO3, La0.6Sr0.4MnO3和 La2CuO4等)催化剂,以及三维有序大孔金属氧化物负载贵金属(Au/Co3O4, Au/LaCoO3, Au/La0.6Sr0.4MnO3和 AuPd/Co3O4等)催化剂的制备及其物化性质与对苯、甲苯、二甲苯、乙醇、丙酮、甲醛、甲烷或氯甲烷等 VOCs氧化的催化性能之间的相关性.借助二氧化硅或聚甲基丙烯酸甲酯微球等硬模板,采用纳米浇铸法可制备出二维或三维的有序单一或多级孔道结构的金属氧化物.研究表明,多孔金属氧化物的催化性能远优于其体相甚至纳米催化剂的.有序多孔材料的优异催化性能与其拥有大的比表面积、高的吸附氧物种浓度、优良的低温还原性、独特的孔道结构、活性组分的高分散以及贵金属与氧化物载体之间的强相互作用等有关.探明影响催化剂活性的因素有利于从原子水平上认识催化过程,为新型高效催化剂的设计与制备奠定基础.本文还指出了此类研究中存在的一些问题,例如利用硬模板法制备多孔材料的缺点是目标催化剂的收率低,硬模板浪费严重,大规模制备多孔催化剂势必增加制备成本,这些问题有待于妥善解决.与此同时,还展望了 VOCs消除技术的未来发展趋势,采用多种技术联用的方法有望最大程度地提高 VOCs的消除效率.     

A family of three-dimensional porous coordination polymers with general formula (Kat)2[{M(H2O)n}3{Re6Q8(CN)6}2]·xH2O (Q=S, Se; n=1.5, 2)

The X-ray crystal structures of a series of new compounds (H₃O)₂[{Mn(H₂O)_1.5}₃{Re₆Se₈(CN)₆}₂]·19H₂O (1), (Me₄N)₂[{Co(H₂O)_1.5}₃{Re₆S₈(CN)₆}₂]·13H₂O (2), (Me₄N)₂[{Co(H₂O)_1.5}₃{Re₆Se₈(CN)₆}₂]·3H₂O (3), (Et₄N)₂[{Mn(H₂O)₂}₃{Re₆Se₈(CN)₆}₂]·6.5H₂O (4), (Et₄N)₂[{Ni(H₂O)₂}₃{Re₆S₈(CN)₆}₂]·6.5H₂O (5), and (Et₄N)₂[{Co(H₂O)₂}₃{Re₆S₈(CN)₆}₂]·10H₂O (6) are reported. All six compounds are isostructural crystallizing in cubic space group with four formulae per unit cell. For compounds 1, 3-5 the following parameters were found: (1) a=19.857(2) Å, R1=0.0283; (3 at 150 K) a=19.634(1) Å, R1=0.0572; (4) a=20.060(2) Å, R1=0.0288; (5) a=19.697(2) Å, R1=0.0224. The structures consist three-dimensional cyano-bridged framework formed by cyano cluster anions [Re₆Q₈(CN)₆]⁴⁻, Q=S, Se and transition metal cations, M²⁺=Mn²⁺, Co²⁺, Ni²⁺. Water molecules and large organic cations Me₄N⁺ and Et₄N⁺ are included in cavities of this framework. Porosity of the framework, its ability to accommodate different cations and water molecules by little changes in the structure, as well as distortion of coordination framework under loss of water of crystallization is discussed.     

Polynuclear bismuth-oxo clusters: insight into the formation process of a metal oxide

The reaction of the bismuth silanolates [Bi(OSiR2R')3] (R = R' = Me, Et, iPr; R = Me, R' = tBu) with water has been studied. Partial hydrolysis gave polynuclear bismuth-oxo clusters whereas amorphous bismuth-oxo(hydroxy) silanolates were obtained when an excess of water was used in the hydrolysis reaction. The metathesis reaction of BiCl3 with NaOSiMe3 provided mixtures of heterobimetallic silanolates. The molecular structures of [Bi18Na4O20(OSiMe3)18] (2), [Bi33NaO38(OSiMe3)24].3 C7H8 (3.3 C7H8), [Bi50Na2O64(OH)2(OSiMe3)22].2 C7H8.2H2O (4.2 C7H8.2 H2O), [Bi4O2(OSiEt3)8] (5), [Bi9O7(OSiMe3)13].0.5 C7H8 (6. 0.5C7H8), [Bi18O18(OSiMe3)18)].2C7H8 (7. 2C7H8) and [Bi20O18(OSiMe3)24].3C7H8 (8.3C7H8) are presented and compared with the solid-state structures of [Bi22O26(OSiMe2tBu)14] (9) and beta-Bi2O3. Compound 2 crystallises in the triclinic space group P1 with the lattice constants a = 17.0337(9), b = 19.5750(14), c = 26.6799(16) A, alpha = 72.691(4), beta = 73.113(4) and gamma = 70.985(4) degrees ; compound 3.3C7H8 crystallises in the monoclinic space group P2(1)/n with the lattice constants a = 20.488(4), b = 22.539(5), c = 26.154(5) A and beta = 100.79(3) degrees ; compound 4.2C7H82 H2O crystallises in the monoclinic space group P2(1)/n with the lattice constants a = 20.0518(12), b = 24.1010(15), c = 27.4976(14) A and beta = 103.973(3) degrees ; compound 5 crystallises in the monoclinic space group P2(1)/c with the lattice constants a = 25.256(5), b = 15.372(3), c = 21.306(4) A and beta = 113.96(3) degrees ; compound 6.0.5C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 15.1916(9), b = 15.2439(13), c = 22.487(5) A, alpha = 79.686(3), beta = 74.540(5) and gamma = 66.020(4) degrees ; compound 7.2C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 14.8295(12), b = 16.1523(13), c = 18.4166(17) A, alpha = 75.960(4), beta = 79.112(4) and gamma = 63.789(4) degrees ; and compound 8.3C7H8 crystallises in the triclinic space group P1 with the lattice constants a = 17.2915(14), b = 18.383(2), c = 18.4014(18) A, alpha = 95.120(5), beta = 115.995(5) and gamma = 106.813(5) degrees . The molecular structures of the bismuth-rich compounds are related to the CaF2-type structure. Formally, the hexanuclear [Bi6O8]2+ fragment might be described as the central building unit, which is composed of bismuth atoms placed at the vertices of an octahedron and oxygen atoms capping the trigonal faces. Depending on the reaction conditions and the identity of R, the thermal decomposition of the hydrolysis products [Bi(n)O(l)(OH)(m-)(OSiR3)(3n-(2l-m))] gives alpha-Bi2O3, beta-Bi2O3, Bi12SiO20 or Bi4Si3O12.     

过渡金属氧化物和金属负载型沸石催化剂上合成 纳米碳管及其表征

采用气相催化沉积法催化合成纳米碳管,比较了不同金属氧化物和金属负载型沸石催化剂以及不同分子筛载体对合成纳米碳管的影响,并用TEM,XRD表征其形貌和结晶度,用DTA-TG考察了纳米碳管的热和稳定性。实验结果表明纳米碳管的形成除了与金属种类有关外,还直接与催化剂的颗粒大小和分散状态有关。粒径在20nm左右的不规则形状的纳米粒子是形成纳米碳管的活性组分,非负载和负载型的催化剂均表明活性组分的粒径与纳米碳管的管径有一定的对应关系。化学提纯后能得到高纯度的纳米碳管;其管壁具有较好的石墨化结构,在空气中的热稳定性大于400℃,而在氮气中能维持到1200℃以上。     

Immobilization of polymer-protected metal colloid catalysts by the formation of polymer hydrogen bond complexes

poly(N-vinyl-2-pyrrolidone)-(PVP) and polyvinyl alcohol-(PVA) protected nanoscopic noble metal colloidal catalysts were immobilized to prepare the corresponding heterogeneous catalysts by forming polymer hydrogen bond complexes of polyacrylic acid (PAA) with PVP or PVA. A PVP–PAA–Pd catalyst was found to be very active and selective for the partial hydrogenation of cyclopentadiene to cyclopentene.     

Various ligand‐stabilized metal nanoclusters as homogeneous and heterogeneous catalysts in the liquid phase

Ligand‐stabilized noble metal nanoclusters, prepared by various chemical methods by different research groups in Japan and Germany, were characterized and examined by a common method for application to the catalysis for hydrogenation of olefins in homogeneous and heterogeneous systems in the liquid phase. The mean diameters of palladium, platinum, rhodium and Pd/Pt nanoclusters stabilized by various ligands range from 1.3 to 3.2 nm if prepared by a single reaction, and from 2.2 to 4.0 nm if prepared by a stepwise growth method. The Stokes radii of metal nanoclusters stabilized by surfactants range from 1.7 to 2.1 nm, suggesting a thickness of the protective layer from 1.1 to 1.4 nm, whereas those stabilized by polymers give much larger values, suggesting the formation of aggregates. The catalytic activities of the metal nanoclusters, evaluated by hydrogenation of 1,3‐cyclooctadiene and methyl acrylate, depend mainly upon the particle size, i.e. the smaller the size, the higher the activity. However, a strongly interacting ligand like tetraoctylammonium halide and 1,10‐phenanthroline can disturb the hydrogenation. In contrast, the activities of heterogeneous catalysts supported on charcoal depend strongly on the covering strength of the stabilizer. Copyright © 2001 John Wiley & Sons, Ltd.     

Polymerization of 1-methoxy-1-ethynylcyclohexane by transition metal catalysts

The polymerization of 1-methoxy-1-ethynylcyclohexane (MEC) was carried out by various transition metal catalysts. The catalysts MoCl₅, MoCl₄, and WCl₆ gave a relatively low yield of polymer (≤ 16%). The catalytic activity of Mo-based chloride catalyst was greater than that of W-based chloride catalyst. However, catalyst tungsten carbene complex (I) gave a larger molar mass and higher yield in the presence of a Lewis acid such as AlCl₃ than in the absence of a Lewis acid. The activity of the tungsten carbene complex was obviously affected by Lewis acidity. The catalyst PdCl₂ was a very effective catalyst for the present polymerization and gave polymers in a high yield. The structure of the resulting poly(MEC) was identified by various instrumental methods as a conjugated polyene structure having an α-methoxycyclohexyl substituent. The poly(MEC)s were mostly light-brown powders and completely soluble in various organic solvents such as tetrahydrofuran (THF), chloroform (CHCl₃), ethylacetate, n-butylacetate, dimethylformamide, benzene, xylene, dimethylacetamide, 1,4-dioxane, pyridine, and 1-methyl-2-pyrrolidinone. Thermogravimetric analysis showed that the polymer started to lose mass at 125°C and that maximum decomposition occurred at 418°C. The x-ray diffraction diagram shows that poly(MEC) has an amorphous structure. © 1997 John Wiley & Sons, Inc.     

金属锑基硫族团簇的合成、结构及电催化氧还原反应性能

为探索金属硫族团簇材料的多样性结构及其光电应用, 利用溶剂热法, 以含孤对电子的金属 Sb(Ⅲ)与硫元素采用不对称的配位几何方式结合, 合成了 Sb 基硫族团簇化合物[Sb₄S₅(S₃)]·C₅H₁₁N(1)和(C₅H₁₂N)₂[In₂Sb₂S₇] (2)。2 种化合物分别由{SbS₃}或{InS₄}配位单元之间以顶点共享的方式组合而成。电催化氧还原反应(ORR)研究表明, 化合物2 的极限电流密度和半波电位均高于化合物1, 表明其 ORR性能更好。Koutecky-Levich图分析表明, 由混合金属构筑而成的层状化合物2 的 ORR催化过程以四电子路径为主。