A highly selective fluorescence switch for Cu2+ and Fe3+ based on a new diarylethene with a triazole-linked rhodamine 6G unit

A new diarylethene compound with a triazole-linked rhodamine 6G unit attached to the imino group (1O) was designed and synthesized. According to the test results, the solution color and fluorescence color of diarylethene can be modulated by lights and metal ions. The solution color could change from colorless to light purple when irradiated with UV light. When Cu²⁺ was added to the diarylethene solution, the color of diarylethene solution became blue, the fluorescence color turned from dark to bright yellow. Although the solution color did not change by adding Fe³⁺, its fluorescence color varied from dark to yellow. Moreover, it was found that the complex ratio of the diarylethene to Cu²⁺ was 1:1 and the binding stoichiometry of the diarylethene to Fe³⁺ was also 1:1 based on the data of NMR, MS, and other experiments. Based on these findings, photochromic figure of the diarylethene with UV/Vis light, Cu²⁺ and Fe³⁺ was constructed. Furthermore, the logic circuit was designed by input signals (ultraviolet stimulus, visible light stimulus, Cu²⁺ (or Fe³⁺) and EDTA) and an output signal (fluorescent intensity at 566?nm (or 575?nm)).     

A bifunctional probe for Al3+ and Zn2+ based on diarylethene with an ethylimidazo[2,1-b]thiazole-6-hydrazide unit

A new diarylethene with ethylimidazo[2,1-b]thiazole-6-hydrazide unit was synthesized, and its photochromic and fluorescent behaviors have been systematically investigated by the stimulation of lights and metal ions in methanol. This new diarylethene exhibited high selectivity and sensitivity toward Al³⁺ and Zn²⁺. The addition of Al³⁺ and Zn²⁺ displayed excellent colorimetric response behaviour with the concomitant color change from colorless to yellow, which could be easily observed by the naked eye. Upon addition of Al³⁺, the fluorescence intensity was enhanced by 180–fold and the emission peak of 1O–Al³⁺ blue-shifted by 15?nm accompanied with a color change from colorless to bright blue. In contrast, when stimulated with Zn²⁺, its fluorescence intensity was enhanced by 35–fold and the emission peak of 1O–Zn²⁺ red-shifted by 16?nm with an evident color change from black to bright green. The LOD for Al³⁺ and Zn²⁺ were determined to be 2.97?×?10^?9?mol?L^?1 and 5.98?×?10^?9?mol?L^?1, respectively. Moreover, a logic circuit was constructed with the fluorescence intensity as the output signal responding to the light and chemical species as the inputs.     

A multi-functional fluorescent sensor for Zn2+ and HSO4− based on a new diarylethene derivative

A new photochromic diarylethene derivative with a hydralazine unit was designed and synthesized. It was not only acted as a Zn²⁺ sensor with the fluorescent color change from dark blue to bright orange, but also acted as a fluorescent sensor for HSO₄^? with the fluorescent color change from dark blue to bright blue. Furthermore, the derivative also exhibits multi-addressable switching properties by the stimulations of lights and chemical reagents. Based on these characteristics, two combinational logic circuits were constructed with the emission intensity as the output signals, and the UV/vis lights, chemical species as the input signals.     

Turn-on fluorescent probe for Zn2+ ions based on thiazolidine derivative

In this study, simple on–off fluorescent/UV–visible (UV–Vis) probes were easily prepared using 2-(2-hydroxyphenyl)thiazolidine-4-carboxylic acid ( Sen-1 ) and/or 2-(2-hydroxy-5-nitrophenyl)thiazolidine-4-carboxylic acid ( Sen-2 ) for fast detection of Zn²⁺ ions. Their sensing properties towards common metal ions were investigated using UV–Vis and fluorescence spectroscopies. Sen-1 and Sen-2 displayed a significant change with the addition of Zn²⁺ ions in the UV–Vis spectra. The addition of Zn²⁺ ions induced a 104 nm bathochromic shift for Sen-1 . The binding ratio towards Zn²⁺ metal ions was determined to be 1:1 by using Job plot analysis and fluorescence spectroscopy. The association constant and free energy (ΔG) of Sen-1 and Sen-2 towards Zn²⁺ ions were calculated by the Benesi–Hildebrand equation. The limit of detection of Sen-1 towards Zn²⁺ ions is 3.73 × 10⁻⁸ M, which is about 1/100 of the value recommended by the World Health Organization for drinking water. Sen-1 was successfully applied to detect Zn²⁺ ions in water samples and the fluorescence test strip was prepared for visual detection of Zn²⁺ ions. Finally, the quantum chemical parameters of Sen-1 and Sen-2 , such as highest occupied molecular orbital, lowest unoccupied molecular orbital, and chemical hardness, were investigated by the Becke, three-parameter, Lee–Yang–Parr, Hartree–Fock, and M062x methods.     

Bifunctional probe for Cu2+/Al3+ based on a diarylethene with a 4, 5-[bis-(5-ethylacetate-yl)-2-thienyl]-1H-imidazole unit

A new asymmetric perfluordiarylethene (1O) was synthesized using 4, 5-[bis-(5-ethylacetate-yl)-2-thienyl]-1H-imidazole as a functional group. 1O exhibited favorable reversible cyclization and cycloreversion reactions upon alternating irradiation with UV and visible light. Both of its open- and closed-ring isomers were found to be highly selective towards Cu²⁺ with significant absorption and color changes, which could be used as a ‘naked-eye’ colorimetric sensor for Cu²⁺ detection. Upon exposure to acid, its fluorescence dramatically enhanced by 14-fold with a color change from dark to bright cyan due to the formation of the protonated compound. Moreover, 1O showed obvious fluorescence “turn-on” signal response towards Al³⁺, and the detection limit for Al³⁺ was determined to be 4.8 × 10^?9 mol L^?1. Based on the fluorescence signals of 1O, a combinational stimuli logic circuit were designed by using the fluorescence intensity as the output signal with the inputs of lights, Al³⁺ and EDTA. Finally, 1O could be used as a biological probe for detecting intracellular Al³⁺ in a physiological environmental.     

A new fluorescence probe based on diarylethene with a benzothiazine unit for selective detection of Cd2+

A novel photochromic diarylethene derivative containing a benzothiazine unit has been synthesized. Its photochromism and fluorescent selectivity to metal ions were studied in detail in methanol solution. Under the stimulation of Cd²⁺ ions, the derivative showed a significant fluorescence enhancement and obvious red shift, accompanied by the fluorescent color changed from dark purple to bright blue. The 1: 1 stoichiometry between the derivative and Cd²⁺ was verified by titration experiments and high resolution mass spectrometry. In addition, a molecular logic circuit was designed with the emission intensity at 476?nm as output and the stimuli of Cd²⁺/EDTA and UV/vis as inputs.     

A fluorescent sensor for Al3+ based on a photochromic diarylethene with a hydrazinobenzothiazole Schiff base unit

A new fluorescent turn-on chemosensor for Al³⁺ based on a diarylethene unit was designed and synthesized. Photochromism, fluorescence switch, and metal ion recognition behaviors of this diarylethene derivative were investigated by absorption and fluorescence emission spectra. It shows an outstanding fluorometric sensing ability toward Al³⁺ ion, and the detection limit was measured to be 9.3 × 10^?8 mol L^?1 via fluorescence methods. Based on these interesting properties, a combinational logic circuit was constructed successfully.     

Novel multi-responsive fluorescence switch for Hg2+ and UV/vis lights based on diarylethene-rhodamine derivative

A new multi-responsive fluorescent switch DTE-Pip-Rho 1O has been designed and synthesized in this study. For this molecule, the reactive site of spirolactam ring is far away from the diarylethene unit through the intramolecular piperazine. It exhibited high selectivity and sensitivity to Hg²⁺ in addition to obvious color change (colorless-pink) and fluorescence “off-on” (dark-orange) during this process. It is believed that the color change is due to Hg²⁺-assisted hydrolysis of rhodamine hydrazide. Therefore, the new molecule can be used as colorimentric and fluorescent chemosensor for Hg²⁺ with high selectivity. The detection limits of absorbance and fluorescence for Hg²⁺ were calculated to be 1.15?μM and 1.16?μM, respectively. The resulting DTE-Pip-Rho 1O-Hg²⁺ could also function as a reversible fluorescence photo-switch in response to UV/vis light owing to FRET mechanism. Moreover, it has been demonstrated that the photo-switchable system displayed excellent fatigue resistance and remarkable anti-photobleaching capability.     

5-二乙胺基-2-(吡啶-2’-亚氨甲基)苯酚的合成及其对Zn2+的识别

本文利用2-氨基吡啶与4-二乙胺基水杨醛反应合成了5-二乙胺基-2-(吡啶-2’-亚氨甲基)苯酚(探针L),对其结构进行了表征。在DMSO/Tris(6:4, v/v, pH =7.4)溶液中,探针L高选择性荧光“关-开”识别Zn₂₊,在365 nm紫外灯照射下,由无荧光变成蓝色荧光。实验表明,探针L与Zn₂₊的结合比为1:1,结合常数为2.6×10₃ L. mol_-1,检测限为 9.39×10_-7mol/L,pH适用范围为7-11,并可检测水样中的Zn₂₊。     

A water-soluble,small molecular fluorescence probe based on 2-(2′-hydroxyphenyl) benzoxazole for Zn2+ in plants

A water-soluble, small molecular zinc fluorescence probe (ZFP) based on 2-(2′-hydroxyphenyl) benzoxazole was prepared. It exhibited high selectivity and sensitivity to Zn²⁺ than the other metal ions. The highest fluorescence enhancement was observed in the presence of Zn²⁺ owing to the inhibition of excited-state intramolecular proton transfer (ESIPT). Furthermore, fluorescence imaging experiments confirmed that ZFP can be used to monitor Zn²⁺ in biological systems.     

Synthesis of a new pyrene-devived fluorescent probe for the detection of Zn2+

A novel pyrene-based receptor bearing benzothiazole was synthesized as a good turn-on fluorescent sensor for the recognition of Zn²⁺. The probe showed an excellent selectivity for Zn²⁺over most other competing ions (eg, Cr³⁺, Li⁺, Cd²⁺, Al³⁺, Pb²⁺, Li⁺, Mg²⁺, Ag⁺, Ca²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Hg²⁺, Ba²⁺, K⁺, Na⁺, Cu²⁺, Fe²⁺) in EtOH-HEPES (65:35, v/v, pH?=?7.20), which might be attributed to the photoinduced electron transfer (PET) mechanism. The formation of 1:1 stoichiometric PBZ-Zn²⁺ complex was determined based on the Job's plot, ¹H NMR titration and ESI-MS. The binding constant of the complex was 4.04?×?10⁴?M^?1 with a detection limit of 2.58?×?10^?7?M. The potential application of the PBZ in real water samples for recognizing Zn²⁺ was investigated. Bio-imaging study also revealed that PBZ could be applied to detecting Zn²⁺ in live cells. These results indicated that PBZ could be a favorable probe for Zn²⁺.     

Structural,Magnetic, and Electrical Properties of Al3+ Substituted CuZn-ferrites

Nanocrystalline Cu_0.5Zn_0.5Fe_2-xAl_xO₂ (x=0.0, 0.1, 0.2, 0.3, 0.4, and 0.5) ferrite materials were synthesized using standard solid state reaction technique. The effects of Al³⁺ contents on the structural, electrical, and magnetic properties were investigated. Single phase cubic spinel structure was revealed by X-ray diffraction analysis. The crystallite size was evaluated considering the most intense diffraction peak (311) using Scherrer formula. Lattice constant decreased, whereas porosity increased with the increase in Al³⁺ concentration. The value of saturation magnetization decreased with increasing aluminum contents. Temperature dependent value of direct current electrical resistivity has been determined. It is observed that the substitution of Al³⁺ has significant impact on the dielectric constant, tangent of dielectric loss angle and dielectric loss factor. The variation in dielectric properties was attributed to space charge polarization.     

空气中合成固溶体荧光粉Ba2(Zn, Mg)Si2O7:Ce3+,Eu2+,Eu3+及其发光特性

采用高温固相法在空气中合成了Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu,yCe³⁺系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu²⁺离子的4f⁶5d¹-4f⁷跃迁,590~725 nm红光区窄带谱源于Eu³⁺的⁵D₀-⁷F_J (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu³⁺在Ba_1.97-yZn_1-xMg_xSi₂O₇基质中被还原成了Eu²⁺;当x=0.1时,荧光粉Ba_1.97Zn_0.9Mg_0.1Si₂O₇:0.03Eu的绿色发光最强,表明Eu³⁺被还原成Eu²⁺离子的程度最大。当共掺入Ce³⁺离子后,形成Ba_1.97-yZn_0.9Mg_0.1Si₂O₇:0.03Eu,yCe³⁺荧光粉体系,其发光随着Ce³⁺离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba_1.96Zn_0.9Mg_0.1Si₂O₇:0.01Ce³⁺,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba₂Zn_0.9Mg_0.1Si₂O₇基质中的能量传递与发光机理。     

A novel calixsalen macrocycle: metal sensing behavior for Zn2+ and intracellular imaging application

The chiral [3+3] macrocycle 1 which displays a calixarene-like crystal structure has been synthesized. The UV/Vis and fluorescence spectral studies show that 1 and Zn²⁺ have a 1:3 complex stoichiometry. It exhibits high selectivity toward Zn²⁺, but no significant responses toward other competitive cations. The intracellular imaging ability has been tested in HeLa cells using a confocal microscope.     

Synthesis,spectroscopic and spectrophotometric study of BODIPY appended crown ether sensor for ion detection

A novel fluoroionophore compound was synthesized from a boron dipyrromethene (BODIPY) fluorophore and 4′-formylbenzo-15-crown-5 ionophore groups. Photophysical properties of the BODIPY-crown compound were studied with UV–Vis and fluorescence spectroscopy. The effect of metalic cations (Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Al³⁺, Fe³⁺, Cu²⁺, Co²⁺, Zn²⁺, Ag⁺, Hg²⁺, Pb²⁺) on the absorption and fluorescence spectra of compound 2 was investigated. Blue shifts were detected in UV–Vis spectra upon addition of some metal ions (Al³⁺ > Fe³⁺ > Na⁺). At the same time, the emission intensity of this complex increased due to binding of Na⁺ ion to the benzo crown cavity. Additionally, a decrease in the intensity of the 630 nm emission peak and an increase in the intensity of the 570 nm emission peak was observed in the fluorescence emission spectra following addition of Al³⁺ and Fe³⁺ ions.     

STUDY ON FLUORESCENCE BEHAVIOUR OF EU~(3+) CONTAINING POLY(METHYL METHACRYLATE)

Fluorimetry has been used to characterize ionomers synthesized by copolymerization ofmethyl mehacrylate, methacrylic acid and europium methacrylate (EMA). Under excita-tion of UV light at 375 nm no seif-quenching was found in fluorescence of EMA containingionomers at 615nm within the concentration range of 1.6×10~(-2) to 11.49×10~(-2) mol%.This means that the distance between two Eu~(3+) ions is larger than 5nm. In the sameconcentration range seif-quenching took place in europium octanoate (EOA) containingpoly(methyl methacrylate) in which EOA was doped as an additive.     

基于苯并噻唑Zn2+荧光探针及其细胞造影应用

设计合成基于苯并噻唑Zn²⁺荧光增强型探针BHP,在HEPES缓冲液中测其对Zn²⁺识别性能。实验结果表明,BHP对Zn²⁺有较高的选择性,对其他金属离子如Cd²⁺,Fe²⁺,Ni²⁺,Pb²⁺,Hg²⁺,Al³⁺,Mn²⁺,Ag⁺,Cu²⁺,Co²⁺,Na⁺,K⁺,Mg²⁺和Ca²⁺无明显荧光增强响应。BHP与Zn²⁺按1：1计量比配位,在生理条件下荧光强度不受pH值影响。在HeLa细胞中对Zn²⁺的造影表明BHP可用于生物体Zn²⁺检测。     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.     

Electronic excitation energy transfer between Tb3+ and Eu3+ in DMSO

Excitation of Tb³⁺ and Eu³⁺ in DMSO with 487 mμ, which corresponds to the ⁷F₆ → ⁵D₄ transition of Tb³⁺, is accompanied by a reduction in the fluorescence efficiency of Tb³⁺ as [Eu³⁺] increases and by the appearance of a weak emission from Eu³⁺. An average rate constant for both the fluorescence quenching of Tb³⁺ and the energy transfer from Tb³⁺ to Eu³⁺ with subsequent emission from the latter, was found to be (2.2 ± 0.4) × 10³ M^?1 sec^?1.     

A multi-responsive diarylethene-rhodamine 6G derivative for sequential detection of Cr3+ and CO32−

A new unsymmetrical diarylethene derivative (1o) with rhodamine 6G as a functional group has been designed and synthesized. It displayed good physicochemical properties induced by lights and chemical stimuli. 1o could sensitively detect towards Cr³⁺ with a 1:1 stoichiometry, and exhibit an obviously fluorescence (from dark to light cyan) and color (from colorless to pink) changes during the recognition process. The limit of detection was determined to be 27?nM and 8.5?nM via UV/vis and fluorescence methods, respectively. More importantly, the resulting complex 1o-Cr³⁺ (1o') could be served as a potential fluorescent probe to selectively and sensitively recognize toward CO₃^2?, the limit of detection was determined to be 0.88?μM and 0.26?μM via UV/vis and fluorescence methods, respectively. Moreover, the quenching of fluorescence intensity can reach 95% due to the perfect FRET processes between the excited open-ring rhodamine 6G moiety and the closed-ring diarylethene unit.