Potassium tert-butoxide-mediated metal-free synthesis of sulfonamides from sodium sulfinates and N,N-disubstituted formamides

By using formamides as amine sources, a novel and efficient KO-t-Bu mediated amination of sodium sulfinates has been developed. The reaction utilizes readily available starting materials under metal-free conditions, thus providing an alternative and attractive route to sulfonamides.     

Synthesis of sulfonamides from azoles and sodium sulfinates at ambient temperature

NBS or NIS mediated direct SN bond formation between azoles and sodium sulfinates is described. The reaction shows good substrate scope and tolerates a wide range of functionalities in both azoles and sodium sulfinate substrates. Pyrazoles are also suitable for this method, various 4-halopyrazoles derivatives were obtained by using N-halosuccinimide (NXS) as the halogen source.     

Co2(CO)8 as a convenient in situ CO source for the direct synthesis of benzamides from aryl halides (Br/I) via aminocarbonylation

A fast, mild, and functional group tolerant method for the direct synthesis of benzamides from aryl halides (Br, I) via aminocarbonylation, using solid Co₂(CO)₈ as a convenient CO source, has been demonstrated. The developed method is applicable to a wide variety of 1° and cyclic and acyclic 2° amines. Nitro substituted (o, m and p) aryl halides have easily been converted to the corresponding benzamides, without the reduction of the nitro group, in high yields using this in situ carbonylation methodology under microwave irradiation.     

Convenient method for the synthesis of phthalazinones via carbonylation of 2-bromobenzaldehyde using Co2(CO)8 as a CO source

A simple one-pot synthesis of phthalazinones by the condensation and intra-molecular carbonylative cyclization of 2-bromobenzaldehydes with hydrazines is reported. This method utilizes solid Co₂(CO)₈ as carbonyl source making it readily accessible in small-scale laboratory applications.     

A fast and efficient method for the preparation of aryl azides using stable aryl diazonium silica sulfates under mild conditions

An efficient, fast, and straightforward procedure for the synthesis of aromatic azides using aryl diazonium silica sulfates and sodium azide at room temperature under mild conditions is described. The use of inexpensive materials, simple and clean work-up, short reaction times and good yields are advantages of this method.     

Electron beam process for SO2 removal from flue gases with high SO2 content

Flue gases with high SO₂ concentration are emitted from different industrial processes, e.g. combustion of coal with high sulfur content, copper smelting and sintering plant. The application of the electron beam process for SO₂ removal from such flue gases was investigated. A parametric study was carried out to determine the removal efficiency as a function of temperature and humidity of irradiated gases, dose and ammonia stoichiometry. At the dose 11.5 kGy 95% SO₂ removal efficiency was obtained when the temperature and humidity of irradiated flue gases and ammonia stoichiometry were properly adjusted. The synergistic effect of high SO₂ concentration on NO_x removal was observed. The collected by-product was the mixture of (NH₄)₂ SO₄ and NH₄NO₃. The content of heavy metals in the by-product was many times lower than the values acceptable for commercial fertilizer.     

[P3N3F5NS(O)Cl] and [{P4N4F6(NS(Cl)N)}2], the first chloro imino- and chloro bis(imino) sulfinates

In CH₃CN solution at −30 °C, [TAS]⁺[P₃N₃F₅NS(O)F]⁻ (2) is formed from TASF and P₃N₃F₅NSO, the compound readily decomposes to give P₃N₃F₆ and [TAS]⁺[NSO]⁻. [TAS]⁺[P₃N₃F₅NS(O)Cl]⁻ (3) and [TAS⁺]₂ [{P₄N₄F₆(NS(Cl)N)}₂]²⁻ (5) were prepared from TASCl and P₃N₃F₅NSO and 1,5-P₄N₄F₆(NSO)₂, respectively, and characterised by X-ray crystallography.     

Direct ring functionalisation of 1,4,7-trimethyl-1,4,7-triazacyclononane and its application in the preparation of functional [L2Mn2O3]-type complexes

Treatment of 1,4,7-trimethyl-1,4,7-triazacyclononane (metacn) with N-bromosuccinimide (NBS) gave a bicyclic ammonium intermediate, which was ring-opened to 2-cyano-1,4,7-trimethyl-1,4,7-triazacyclononane by reaction with potassium cyanide. Reduction to the amine followed by reaction with anhydrides gave amides, which could subsequently be converted to dinuclear tris-μ-oxo manganese complexes.     

Copper-mediated oxidative trifluoromethylthiolation of aryl boronic acids with CF3CO2Na and elemental sulfur

A practical three-component copper-mediated oxidative trifluoromethylthiolation of aryl boronic acids with cheap and readily available sodium trifluoroacetate and elemental sulfur is reported. A variety of trifluoromethylthio-substituted aromatics are synthesized in moderate yields under mild reaction conditions.     

Calculation of the rate of SO2 oxidation to SO3

Approximate equation to calculate the effectiveness factor of catalyst for SO₂ oxidation to SO₃ has been derived. Calculated data agree well with those predicted by a quasi-homogeneous model.

---

. .

     

A shock tube study of vibrational relaxation in SO2, SO2Ar and SO2He

Vibrational relaxation times in SO₂, SO₃Ar (11%, 20% and 54% SO₂) and SO₂He (9.5% SO₂) were measured behind incident shock waves using the laser schlieren technique in the temperature ranges 550–1200 K, 700–2100 K and 700–1600 K respectively for the three systems. An analysis of the density gradient signals revealed a double exponential behaviour consistent with earlier studies. The fast relaxation rates were not quantitatively studied and the slow relaxation rates were found to fit the following equations:

where Pτ is the relaxation time in atm μs and T is in °K. The collision numbers corresponding to the slower rates were found to agree well with a recent theoretical calculation using SSH-Tanczos theory.     

Synthesis of aryl azides from aryl halides promoted by Cu2O/tetraethylammonium prolinate

An efficient approach to aryl azides, in short reaction times and good to excellent yields, has been developed via the reaction of aryl halides with sodium azide under Cu₂O/tetraethylammonium prolinate catalysis.     

InCl3 catalyzed C-C coupling of aryl alcohols and TosMIC

The InCl₃ mediated C-C coupling reaction between aryl alcohols and TosMIC gives the corresponding amides in good to high yields.     

Copper-catalyzed N-arylation of diazoles with aryl bromides using KF/Al2O3: an improved protocol

Copper-catalyzed N-arylation of diazoles can be accomplished using air-stable CuI as a copper source and 1,10-phenanthroline in the presence of KF/Al₂O₃ as a base. This is a simple and efficient method for the coupling of aryl bromide with diazoles. Different functionalized aryl bromides were coupled with diazoles using this system.     

Copper-free PdCl2/PPh3-catalyzed Sonogashira coupling reaction of aryl bromides with terminal alkynes in water

A simple, copper-free and efficient catalytic system for the Sonogashira coupling reaction of aryl bromides with terminal alkynes in pure water has been developed. The use of PdCl₂/PPh₃ in the presence of pyrrolidine allows the coupling reaction to proceed at 120 °C in moderate to excellent yields.     

Imidazolium-based phosphinite ionic liquid (IL-OPPh2) as Pd ligand and solvent for selective dehalogenation or homocoupling of aryl halides

The use of an imidazolium-based phosphinite ionic liquid (IL-OPPh₂) as ligand for Pd offers an efficient reagent system for the selective dehalogenation or homocoupling of aryl halides in the presence of NaOPrⁱ or Et₃N, respectively. This ionic liquid plays a dual role as both the reaction media and also as the potential complexing agent with Pd via its phosphinite carrying group. The ionic liquid containing its corresponding Pd complex can be easily recovered and reused in several runs.     

Theoretical investigations on the SO2 + HO2 reaction and the SO2–HO2 radical complex

The mechanism of the SO₂ + HO₂ reaction was studied theoretically for the first time. Three product channels were revealed, namely, O₂ + HOSO, O₂ + HSO₂, and OH + SO₃. The O₂ + HOSO channel dominates the reaction under combustion conditions. A five-member-ring complex [SO₂–HO₂] exists at the entrance of the reaction. The structure and binding energy (D_e and D₀) of the SO₂–HO₂ complex have been calculated. In view of D₀ = 21.2 ± 2.0 kJ mol⁻¹, the SO₂–HO₂ complex should be stable at low temperature. The infrared spectra and frequency shifts were calculated for both SO₂–HO₂ and SO₂–DO₂, and compared with the available experimental data.     

Ni/NHC-catalyzed cross-coupling of methyl sulfinates and amines for direct access to sulfinamides

It was reported to develop a simple and convenient method for the Ni/NHC-catalyzed cross-coupling of methyl sulfinates and amines without an acid/base to afford secondary or tertiary sulfinamides in moderate to good yields. The method can provide the desired products with broad substrate scope, good chemoselectivity and good functional group compatibility. The presented approach may enrich the Ni/NHC catalyst system and promote the applications of methyl sulfinates in the organic sulfur chemistry.     

The mechanism of SO2 oxidation by CH3O2 radicals. Rate coefficients for the reactions of CH3O2 with SO2 and NO

The reactions of CH₃O₂ with SO₂ and NO have been studied by steady state photolysis of azomethane in the presence of O₂SO₂→NO mixtures at 296 K and 1 atm total pressure. The quantum yield of NO oxidation by CH₃O₂ radicals is increased substantially when SO₂ is added to the system indicating an SO₂ induced chain oxidation of NO. The rate law gives k₁/k₂ = (2.5 ± 0.5) × 10^?3 for CH₃O₂ + SO₂ → CH₃O₂SO₂ (1), CH₃O₂ + NO → CH₃O + NO₂ (2). Combining this ratio with the absolute value of k₁ = 8.2 × 10^?15 cm³ s^?1 gives k₂ = 10^{?11.5 ± 02} cm³ s^?1.     

A simple, base-free preparation of S-aryl thioacetates as surrogates for aryl thiols

A mild method for the preparation of S-aryl thioacetates by hetero cross-coupling reactions of aryl bromides or aryl triflates with potassium thioacetate is described. The reaction proceeded smoothly in toluene at 110 °C, mediated by catalytic Pd₂(dba)₃ in combination with CyPF-tBu as the ligand. Neither the presence of a base nor microwave conditions were required. The formed S-aryl thioacetate proved to be stable under flash chromatographic conditions and could be rapidly converted into the corresponding thiol under mildly basic conditions.