Membrane properties of binary and ternary systems of ganglioside GM1/dipalmitoylphosphatidylcholine/dioleoylphosphatidylcholine

The membrane properties of the ganglioside GM1 (GM1)/dioleoylphosphatidylcholine (DOPC) binary system and GM1/dipalmitoylphosphatidylcholine (DPPC)/DOPC ternary system were investigated using surface pressure measurements and atomic force microscopy (AFM), and the effect of surface pressure on the properties of the membranes was examined. Mixed GM1/DPPC/DOPC monolayers were deposited on mica using the Langmuir-Blodgett technique for AFM. GM1 and DOPC were immiscible and phase-separated. The AFM image of the GM1/DOPC (1:1) monolayer showed island-like GM1 domains embedded in the DOPC matrix. There was no morphological change on varying surface pressure. The surface pressure-area isotherm of the GM1/DPPC/DOPC (2:9:9) monolayer showed a two-step collapse as in the DPPC/DOPC (1:1) monolayer. The AFM image for the GM1/DPPC/DOPC monolayer showed DPPC and GM1 domains in the DOPC matrix, and the DPPC-rich phase containing GM1 showed a percolation pattern the same as the GM1/DPPC (1:9) monolayer. The percolation pattern in the GM1/DPPC/DOPC monolayer changed as the surface pressure was varied. The surface pressure-responsive change in morphology of GM1 was affected by the surrounding environment, suggesting that the GM1 localized in each organ has a specific role.     

Surface-dependent transitions during self-assembly of phospholipid membranes on mica, silica, and glass

Formation of supported membranes by exposure of solid surfaces to phospholipid vesicles is a much-used technique in membrane research. Freshly cleaved mica, because of its superior flatness, is a preferred support, and we used ellipsometry to study membrane formation kinetics on mica. Neutral dioleoyl-phosphatidylcholine (DOPC) and negatively charged dioleoyl-phosphatidylserine/dioleoyl-phosphatidylcholine (20% DOPS/80% DOPC) vesicles were prepared by sonication. Results were compared with membrane formation on silica and glass, and the influence of stirring, buffer, and calcium was assessed. Without calcium, DOPC vesicles had a low affinity (Kd approximately 30 microM) for mica, and DOPS/DOPC vesicles hardly adsorbed. Addition of calcium promptly caused condensation of the adhering vesicles, with either loss of excess lipid or rapid additional lipid adsorption up to full surface coverage. Vesicle-mica interactions dominate the adsorption process, but vesicle-vesicle interactions also seem to be required for the condensation process. Membranes on mica proved unstable in Tris-HCl buffer. For glass, transport-limited adsorption of DOPC and DOPS/DOPC vesicles with immediate condensation into bilayers was observed, with and without calcium. For silica, vesicle adsorption was also rapid, even in the absence of calcium, but the transition to condensed layers required a critical surface coverage of about 50% of bilayer mass, indicating vesicle-vesicle interaction. For all three surfaces, additional adsorption of DOPC (but not DOPS/DOPC) vesicles to condensed membranes was observed. DOPC membranes on mica were rapidly degraded by phospholipase A2 (PLA2), which pleads against the role of membrane defects as initial PLA2 targets. During degradation, layer thickness remained unchanged while layer density decreased, in accordance with recent atomic force microscopy measurements of gel-phase phospholipid degradation by PLA2.     

L-α-二油酸磷酯酰胆碱和芦丁硬脂酸酯混合单分子膜的相容性

黄酮类化合物广泛存在于植物中,具有抗氧化、抗肿瘤和抗病毒等多种生物活性[1-3]。许多研究表明,具有相同苷元的黄酮类化合物比其糖苷具有更优秀的抗氧化活性,这是由于苷元亲脂性强能嵌入生物膜流水层的内核发挥作用,以及糖基的空间位阻减弱了黄酮化合物和生物分子的结合能力[4     

DC photoelectric signals from bacteriorhodopsin adsorbed on lipid monolayers and thiol/lipid bilayers supported by mercury

Purple membrane (PM) fragments were adsorbed on a dioleoylphosphatidylcholine (DOPC) monolayer and on a mixed alkanethiol/DOPC bilayer supported by mercury to investigate the kinetics of light-driven proton transport by bacteriorhodopsin (bR). The light-on and light-off capacitive currents on an alkanethiol/DOPC bilayer at pH 6.4 were interpreted on the basis of a simple equivalent circuit. The pH dependence of the biphasic decay kinetics of the light-on currents was analyzed to estimate the pK(a) values for the transitions releasing protons to, and taking up protons from, the solution. The linear dependence of the stationary light-on current of bR on a DOPC monolayer self-assembled on mercury upon the applied potential was interpreted on the basis of an equivalent circuit.     

Effect of membrane composition on surface states of ganglioside GM1/dipalmitoylphosphatidylcholine/dioleoylphosphatidylcholine monolayers

The surface states of ganglioside GM1 (GM1)/dipalmitoylphosphatidylcholine (DPPC)/dioleoylphosphatidylcholine (DOPC) monolayers having various compositions were investigated using atomic force microscopy (AFM), and the effect of the composition on the surface states of the membrane was examined. The AFM images for the ternary system showed a DPPC-rich phase containing GM1 in the DOPC matrix, which indicated that the morphology varied as the composition of the monolayers changed. The AFM images for the GM1/DPPC/DOPC monolayers having (2:9:9) and (4:18:9) molar ratios showed a percolation pattern similar to that observed for the GM1/DPPC (1:9) monolayer. The AFM image for the GM1/DPPC/DOPC (2:18:9) monolayer showed a dotted pattern with a high topography. Monolayers having a higher content of DOPC than DPPC and/or having a higher content of GM1 showed dot-like domains in the DPPC-rich phase containing GM1. In conclusion, the surface states of GM1/DPPC/DOPC monolayers changed depending on the composition. These results may be related to a diversity of GM1 in various organs.     

Time-dependent interactions of the two porphyrinic compounds chlorin e6 and mono-L-aspartyl-chlorin e6 with phospholipid vesicles probed by NMR spectroscopy

The distribution processes of chlorin e6 (CE) and monoaspartyl-chlorin e6 (MACE) between the outer and inner phospholipid monolayers of 1,2-dioleoyl-phosphatidylcholine (DOPC) vesicles were monitored by 1H NMR spectroscopy through analysis of chemical shifts and line widths of the DOPC vesicle resonances. Chlorin adsorption to the outer vesicle monolayer induced changes in the DOPC 1H NMR spectrum. Most pronounced was a split of the N-methyl choline resonance, allowing for separate analysis of inner and outer vesicle layers. Transbilayer distribution of the chlorin compounds was indicated by time-dependent characteristic spectral changes of the DOPC resonances. Kinetic parameters for the flip-flop processes, that is, half-lives and rate constants, were obtained from the experimental data points. In comparison to CE, MACE transbilayer movement was significantly reduced, with MACE remaining more or less attached to the outer membrane layer. The distribution coefficients for CE and MACE between the vesicular and aqueous phase were determined. Both CE and MACE exhibited a high affinity for the vesicular phase. For CE, a positive correlation was found between transfer rate and increasing molar ratio CE/DOPC. Enhanced membrane rigidity induced by increasing amounts of cholesterol into the model membrane was accompanied by a decrease of CE flip-flop rates across the membrane. The present study shows that the movement of porphyrins across membranes can efficiently be investigated by 1H NMR spectroscopy and that small changes in porphyrin structure can have large effects on membrane kinetics.     

Epi-fluorescence microscopic characterization of potential-induced changes in a DOPC monolayer on a Hg drop

Characterization of the potential-induced changes of a lipid-coated Hg-0.1 M KCl interface through electrochemical techniques and newly developed in situ fluorescence microscopy is described. Fluorescence of a fluorophore-containing dioleoyl phosphatidylcholine (DOPC) layer deposited from the gas-solution interface was observed to be dependent upon the potential of the Hg surface. The largest changes occurred for potentials where the lipid layer was desorbed: the lipid moved away from the electrode surface, reducing the efficiency of metal-mediated quenching of the excited state resulting in an increase in fluorescence. Electric potential-induced changes in the morphology of the adsorbed or desorbed DOPC lipid monolayer were observed optically for the first time using this technique. The observed potential-dependent fluorescence was compared to previous studies on an octadecanol-coated Au(111) electrode. Fluorescence microscopy was also used to characterize the fusion of DOPC liposomes with a previously adsorbed DOPC layer. Large changes in fluorescence were observed for the DOPC layer after fusion with liposomes. The fusion was accomplished via potential-created defects in the adsorbed DOPC monolayer through which the liposomes interact. The integration of the liposomes into the adsorbed monolayer results in a hybrid layer in which some lipid exists further from the electrode surface, resulting in a large increase in fluorescence. Possibilities for the creation of a biomimetic adsorbed hybrid lipid layer on Hg are also discussed.     

Affinity adsorption and separation behaviors of avidin on biofunctional magnetic nanoparticles binding to iminobiotin

Knowing the adsorption behavior of target proteins on biofunctional magnetic nanoparticles is of great importance for the separation and purification of proteins. Adsorption behaviors of avidin on biofunctional magnetic nanoparticles binding to iminobiotin were investigated under different conditions of temperature, pH, ionic strength, and feed avidin concentration. Biofunctionalization of the non-functional nanoparticles was performed, coupled with iminobiotin. Characterization of the particles was carried out using transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). The results showed the avidin adsorption behaviors were mainly dependent on affinity interaction between avidin and iminobiotin coupled with the nanoparticles, which exhibited temperature, pH, ionic strength, and feed avidin concentration sensitivity. Maximum avidin adsorption capacity was achieved as 225 mg avidin/g biofunctional nanoparticles. Results were well fitted to the Langmuir isotherm model with the feed avidin concentration of less than 45 μg/ml. Based on the experiments above, the biofunctional magnetic nanoparticles were used to separate avidin from treated egg-white solution containing large amounts of other proteins. The avidin was isolated in 92% yield with an optical purity of more than 98.5% according to the HPSEC data. The regeneration of these nanoparticles was also studied and almost 87.3% of avidin could still be recovered by these regenerated nanoparticles.     

Quantitative FT-IRRAS spectroscopic studies of the interaction of avidin with biotin on functionalized quartz surfaces

The interaction of avidin with biotin was studied on functionalized quartz surfaces terminated with 3-aminopropyltrimethoxysilane (3-APTMS), 2,2'-(ethylenedioxy)bis(ethylenediamine) (DADOO), and fourth-generation amine-terminated polyamidoamine (G4-NH2 PAMAM) dendrimers with the use of Fourier transform infrared reflection-absorption spectroscopy (FT-IRRAS). In particular, the molecular recognition ability of these surfaces was quantified through FT-IRRAS in combination with the use of an alkyne dicobalt hexacarbonyl probe coupled with avidin. The degree of nonspecific adsorption of avidin was determined by exposure of the amine-terminated and/or biotinylated surfaces to solutions of biotin-saturated avidin. The results indicate that the biotinylated 3-APTMS layer exhibits a very low specific binding capacity for avidin (on the order of 0.15 pmol of avidin/cm2) and substantial nonspecific adsorption. Both the binding capacity and the specificity were greatly improved when the 3-APTMS layer on quartz was modified through serial chemisorption of glutaraldehyde (GA), DADOO, and/or G4-NH2 PAMAM dendrimer layers. Among these layers, the biotinylated G4-NH2 PAMAM dendrimer layer exhibited the highest capacity for avidin binding (2.02 pmol of avidin/cm2) with a specificity of approximately 90%. This effect can be attributed to the efficient packing/ordering of the binding dendrimer layer, leading to a more dense and better organized layer of biotin headgroups on the subsequent biotinylated surface.     

Silica supported phospholipid layers doped with GM1: A comparison between different methods

A method to coat hydrophobic surfaces with lipid molecules in a reproducible manner and in which the lipid molecules are resistant to detergent washings, would benefit the development of new ELISA assays. This work presents different approaches to build 1,2-dioleolyl-sn-glycero-3-phosphocholine (DOPC) layers doped with a monosialoganglioside (GM1) supported on silica surfaces, which are stable toward buffer rinsing and washing with surfactant (Tween 20). The three methods employed were: method 1, coadsorption of DOPC:GM1 (0-10 mol%) with the surfactant n-dodecyl-beta-D-maltoside (DDM) from micellar solutions, with successive adsorption and rinsing steps; method 2, vesicle fusion from DOPC: GM1 (0-10 mol%) liposomes; and method 3, deposition of GM1 from organic solvent (chloroform) and exposure to an aqueous environment (hydration method). The vesicle fusion method was also tested in polystyrene surfaces. Cholera toxin subunit B (CTB) was used to detect the presence of GM1 on the formed layers. The results indicated that the vesicle fusion was the only method that was successful in creating stable mono- and bilayers onto hydrophobized and hydrophilic silica, respectively. The mixed micellar solution method was suitable for creating pure lipid (DOPC) monolayers but the incorporation of GM1 in the micelles led to monolayers which were very unstable with respect to buffer rinsing. The hydration method led to monolayers of GM1 that were partly rinsed off by a continuous buffer flow. Adsorption of CTB was found to be proportional to the amount of GM1 present in the liposomes. The amount of CTB adsorbed onto the lipid bilayers was roughly the double as the one determined on the monolayers with the same liposome compositions. The vesicle fusion method was also able to create monolayers of pure DOPC and DOPC:10 mol% GM1 on the polystyrene surfaces.     

DOPC/DPPC单层膜中分子间的相互作用及形态特征

利用Langmuir-Blodgett(LB)技术制备了不同表面压力下的1,2-二油酸-甘油-3-磷脂酰胆碱(DOPC)/1,2-二棕榈酸甘油-3-磷脂酰胆碱(DPPC)(摩尔比为1:1)和DOPC/DPPC/Chol(摩尔比为2:2:1)单层膜, 对单层膜内分子间的相互作用进行了热力学分析, 并用荧光显微镜和原子力显微镜对其形态进行了观测.热力学分析表明, DOPC与DPPC分子在单层膜结构中相互作用为排斥力, 诱导单层膜出现相变; DOPC, DPPC与胆固醇(Chol)间的相互作用均为吸引力, 当表面压力(π)大于18 mN/m时, DPPC与胆固醇的作用力大于DOPC.荧光显微镜观测表明, DOPC/DPPC单层膜出现明显相分离现象, 富含DPPC微区成“花形”结构, 且随着表面压力的升高微区逐渐增大, “花瓣”增多; 当胆固醇加入到DOPC/DPPC体系时, 单层膜相态由液相与凝胶相共存转变为液态无序相与液态有序相共存结构, 富含DPPC的微区形状从“花形”转变成“圆形”.原子力显微镜对单层膜的表征验证了荧光显微镜的观测结果, 表明胆固醇加入到DOPC/DPPC体系中对单层膜排列具有明显的影响, 压力和溶液状态等是影响脂膜结构的重要因素.     

Stimuli-sensitive thin films prepared by a layer-by-layer deposition of 2-iminobiotin-labeled poly(ethyleneimine) and avidin

Layered thin films composed of avidin and 2-iminobiotin-labeled poly(ethyleneimine) (ib-PEI) were prepared by a layer-by-layer deposition of avidin and ib-PEI on a solid surface, and the disintegration induced by changing environmental pH and adding biotin in the solution was studied. The avidin/ib-PEI layered film could be deposited only from the solutions of pH 10-12. The film did not form in pH 9 or more acidic media because of a low affinity of protonated 2-iminobiotin residues in ib-PEI to avidin. The avidin/ib-PEI layered films were stable in pH 8-12 solutions, while in pH 5-7 media the film decomposed spontaneously as a result of the protonation to 2-iminobiotin residues in ib-PEI. The avidin/ib-PEI films were disintegrated also upon addition of biotin and analogues in the solution owing to the preferential binding of biotin or analogues to the binding site of avidin. The decomposition rate was arbitrarily controlled by changing the type of stimulant (biotin or analogues) and its concentration. The avidin/ib-PEI films were disintegrated rapidly by addition of 10(-)(5) M of biotin or desthiobiotin, while the rate was slower upon adding the same concentration of lipoic acid or 2-(4'-hydroxyphenylazo)benzoic acid. On the other hand, the film was fully decomposed within 1 min in the 10(-)(3) M lipoic acid or 2-(4'-hydroxyphenylazo)benzoic acid solution. Thus, the decomposition rate is highly dependent on the concentration of the stimulants. It was observed that the stimuli-induced decomposition of the films is slow at pH 12, in contrast to a rapid decomposition in pH 8 medium due to a low affinity of the protonated 2-iminobiotin to avidin. The present system may be useful for constructing stimuli-sensitive devices that can release drug or other functional molecules.     

Remodeling of ordered membrane domains by GPI-anchored intestinal alkaline phosphatase

Glycosylphosphatidyl-inositol (GPI)-anchored proteins preferentially localize in the most ordered regions of the cell plasma membrane. Acyl and alkyl chain composition of GPI anchors influence the association with the ordered domains. This suggests that, conversely, changes in the fluid and in the ordered domains lipid composition affect the interaction of GPI-anchored proteins with membrane microdomains. Validity of this hypothesis was examined by investigating the spontaneous insertion of the GPI-anchored intestinal alkaline phophatase (BIAP) into the solid (gel) phase domains of preformed supported membranes made of dioleoylphosphatidylcholine/dipalmitoylphosphatidylcholine (DOPC/DPPC), DOPC/sphingomyelin (DOPC/SM), and palmitoyloleoylphosphatidylcholine/SM (POPC/SM). Atomic force microscopy (AFM) showed that BIAP inserted in the gel phases of the three mixtures. However, changes in the lipid composition of membranes had a marked effect on the protein containing bilayer topography. Moreover, BIAP insertion was associated with a net transfer of phospholipids from the fluid to the gel (DOPC/DPPC) or from the gel to the fluid (POPC/SM) phases. For DOPC/SM bilayers, transfer of lipids was dependent on the homogeneity of the gel SM phase. The data strongly suggest that BIAP interacts with the most ordered lipid species present in the gel phases of phase-separated membranes. They also suggest that GPI-anchored proteins might contribute to the selection of their own microdomain environment.     

Photocleavage of avidin by a new pyrenyl probe

In this study, a new small-molecule-based reagent was designed to recognize and bind to specific site in protein. A new pyrenyl probe, d-biotinyl-1(1-pyrene)methylamide (Py-biotin) was designed and synthesized by coupling of d-biotin to 1(1-pyrene)methylamine hydrochloride. Binding studies and site-specific photocleavage of avidin by Py-biotin were demonstrated. Binding of Py-biotin to avidin was studied using absorbance and fluorescence spectroscopic techniques. Red shifts of the absorption peak positions of the pyrenyl chromophore followed by hyperchromism were observed upon binding to avidin. The photocleavage of avidin was achieved when a mixture of the protein, Py-biotin, and an electron acceptor, cobalt(III) hexammine trichloride (CoHA), was irradiated at 342nm. No reaction occurred in the absence of the probe, CoHA, or light. N-terminal sequencing of the peptide fragments indicated a cleavage site of avidin between Thr 77 and Val 78. The high specificity of photocleavage may be valuable in targeting specific sites of proteins with small molecules.     

An electrochemical study into the interaction between complement-derived peptides and DOPC mono- and bilayers

Electrochemical methods employing the hanging mercury drop electrode were used to study the interaction between variants of the complement-derived antimicrobial peptide CNY21 (CNYITELRRQH ARASHLGLAR) and dioleoyl phosphatidylcholine (DOPC) monolayers. Capacitance potential and impedance measurements showed that the CNY21 analogues investigated interact with DOPC monolayers coating the mercury drop. Increasing the peptide hydrophobicity by substituting the two histidine residues with leucine resulted in a deeper peptide penetration into the hydrophobic region of the DOPC monolayer, indicated by an increase in the dielectric constant of the lipid monolayer (Deltaepsilon = 2.0 after 15 min interaction). Increasing the peptide net charge from +3 to +5 by replacing the histidines by lysines, on the other hand, arrests the peptide in the lipid head group region. Reduction of electroactive ions (Tl+, Pb2+, Cd2+, and Eu3+) at the monolayer-coated electrode was employed to further characterize the types of defects induced by the peptides. All peptides studied permeabilize the monolayer to Tl+ to an appreciable extent, but this effect is more pronounced for the more hydrophobic peptide (CNY21L), which also allows penetration of larger ions and ions of higher valency. The results for the various ions indicate that charge repulsion rather than ion size is the determining factor for cation penetration through peptide-induced defects in the DOPC monolayer. The effects obtained for monolayers were compared to results obtained with bilayers from liposome leakage and circular dichroism studies for unilamellar DOPC vesicles, and in situ ellipsometry for supported DOPC bilayers. Trends in peptide-induced liposome leakage were similar to peptide effects on electrochemical impedance and permeability of electroactive ions for the monolayer system, demonstrating that formation of transmembrane pores alone does not constitute the mechanism of action for the peptides investigated. Instead, our results point to the importance of local packing defects in the lipid membrane in close proximity to the adsorbed peptide molecules.     

Comparison by QCM and photometric enzymatic test of the biotin-avidin recognition on a biotinylated polypyrrole

By gravimetric measurements using a quartz cristal microbalance (QCM), we have studied the immobilization of biotinylated glucose oxidase enzymes (B-GOx) bound through on an intermediate avidin layer to a biotinylated polypyrrole film. The aim is to assess the amount of B-GOx specifically anchored on the biotinylated polypyrrole/avidin assembly thank to the biotin/avidin interaction between avidin and B-GOx. Indeed the estimated amount from the QCM measurement corresponds to the specific recognition of avidin/B-GOx added to a non-specific recognition (adsorption) of B-GOx. In order to discriminate these two phenomena, we have carried out a study by QCM of the anchoring of B-GOx on an avidin layer linked by adsorption to a polypyrrole free from biotin units. From QCM measurements we have deduced for the biotinylated polypyrrole/avidin assembly that the amount of B-GOx bound via the biotin/avidin interaction and those due to the avidin adsorption process correspond to 3.9 pmol cm(-2) (1.3 equivalent of B-Gox monolayer) and 1.4 pmol cm(-2) (0.46 equivalent of B-GOx monolayer) respectively. These values have been corroborated by measurements of the enzymatic activity of GOx.     

Multicomponent cationic lipid-DNA complex formation: role of lipid mixing

Multicomponent cationic lipid-DNA complexes (lipoplexes) were prepared by adding linear DNA to mixed lipid dispersions containing two populations of binary cationic liposomes and characterized by means of small angle X-ray scattering (SAXS). Four kinds of cationic liposomes were used. The first binary lipid mixture was made of the cationic lipid (3'[N-(N',N'-dimethylaminoethane)-carbamoyl]cholesterol (DC-Chol) and the neutral helper lipid dioleoylphosphocholine (DOPC) (DC-Chol/DOPC liposomes), the second one of the cationic 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and the neutral dioleoylphosphatidylethanolamine (DOPE) (DOTAP/DOPE liposomes), the third one of DC-Chol and DOPE (DC-Chol/DOPE liposomes), and the fourth one of DOTAP and DOPC (DOTAP/DOPC liposomes). Upon DNA-induced fusion of liposomes, large lipid mixing at the molecular level occurs. As a result, highly organized mixed lipoplexes spontaneously form with membrane properties intermediate between those of starting liposomes. By varying the composition of lipid dispersions, different DNA packing density regimes can also be achieved. Furthermore, occurring lipid mixing was found to induce hexagonal to lamellar phase transition in DOTAP/DOPE membranes. Molecular mechanisms underlying experimental findings are discussed.     

Activity of synthetic ion channels is influenced by cation-pi interactions with phospholipid headgroups

A suite of synthetic hydraphile ion channels has been used to probe the possibility of cation-pi interactions between the channel and the phospholipid bilayer. The hydraphiles selected for this study contained either no sidearm, aliphatic sidearms or aromatic sidearms that varied in electron-richness. An ion selective electrode (ISE) method was used to evaluate the ion transport ability of these hydraphiles across synthetic bilayers. Transport was dependent on sidearm identity. Ion transport activity for the aromatic sidechained compounds was greatest when the sidearms were electron rich and vesicles were prepared from 100% DOPC (trimethylammonium cation headgroup, overall neutral). When the lipid headgroups were made more negative by changing the composition from DOPC to 70 : 30 (w/w) DOPC : DOPA, transport by the aromatic-sidechained channels was reduced. Fluorescence studies showed that when the lipid composition changed, the headgroups experienced a different polarity, suggesting reorientation. The data are in accord with a stabilizing cation-pi interaction between the aromatic sidearm of the hydraphile channel and the ammonium phospholipid headgroup.     

Influence of gel-phase microdomains and lipid rafts in lipid monolayers on the electron transfer of a lipophilic redox probe: dioctadecylviologen

Gel-phase microdomains and lipid rafts form spontaneously in monolayers of lipid mixtures of dioleoylphosphatidylcholine (DOPC), palmitoylsphingomyelin (PSM) and cholesterol (Chol), self-assembled on mercury. The influence of microdomains on the electron transfer properties of 2 mol% dioctadecylviologen (DODV), incorporated in these lipid monolayers, was investigated by cyclic voltammetry. In pure DOPC, the DODV molecules tend to aggregate, giving rise to strong attractive lateral interactions. With an increase in the PSM mole fraction in DOPC/PSM binary mixtures, the edges of the resulting gel-phase microdomains act as docking sites for the DODV molecules, decreasing lateral interactions and modifying the DODV redox properties. A similar behavior is shown by lipid rafts formed by adding Chol to the above binary mixtures. By varying the DOPC/PSM molar ratio, the midpoint between the peak potentials of the DODV reduction and oxidation peaks shifts in parallel with the surface dipole potential of the lipid mixture. This behavior indicates that the formal (half-reduction) potential of a redox pair, as measured versus a given reference electrode, may include a surface dipole potential if one or both members of the redox pair are embedded in a medium different from the bulk phase containing the reference electrode.     

A rapid isocratic high-performance liquid chromatography method for determination of cholesterol and 1,2-dioleoyl-sn-glycero-3-phosphocholine in liposome-based drug formulations

A high-performance liquid chromatography (HPLC) method for the determination of cholesterol and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) in liposome-based drug formulations has been developed. Liposome formulations of anticancer agents (viz., paclitaxel, docetaxel, 7-ethyl-10-hydroxycamptothecin (SN38), doxorubicin, mitoxantrone and an antisense oligodeoxyribonucleotide, etc.) were prepared. These formulations contain DOPC, cholesterol and other lipids, such as tetramyristoyl cardiolipin or 1,3-bis(1,2-bis-tetradecyloxy-propyl-3-dimethylethoxyammonium bromide)propan-2-ol [(R)-PCL-2] in product-specific ratios. A simple HPLC method that uses isocratic elution and UV detection has been developed for simultaneous quantification of cholesterol and DOPC components of the liposome formulations. The chromatographic separation of these components is achieved using a C8 analytical column with 50 mM ammonium phosphate buffer (pH 2.7)-methanol (15:85, v/v) as mobile phase. Both cholesterol and DOPC peaks are well resolved and free of interference from other excipients or degraded impurities in the formulation. The method has been found to be linear (r > 0.999) over a wide concentration range of both analytes. This method offers the advantage of simultaneous quantitation of cholesterol and DOPC in various liposome-based formulations without any preprocessing of the sample, and has quantitation limits of 0.5 and 10 microg/mL for cholesterol and DOPC, respectively.