异双希夫碱配合物的合成与表征

邻苯二胺与5-氯-2-羟基二苯酮、2-羟基-1-萘醛作用合成了一种异双四齿希夫碱配体C30H21N2O2Cl(H2L)。在无水体系中该配体与金属醋酸盐作用合成了5种固体配合物[ML]·nH2O(M=Cu(Ⅱ),Zn(Ⅱ),Mn(Ⅱ),Co(Ⅱ),Ni(Ⅱ);n=0-1)。通过元素分析、IR、UV、TG-DTG及摩尔电导分析等手段对合成的配合物进行了表征。     

Synthesis and characterization of nickel(II) complexes with potentially pentadentate macrocyclic ligands having N3O2 donor set

Nickel(II) complexes of N₃O₂ donor macrocycles incorporating 17- to 19-membered macrocyclic rings have been prepared. Physical measurements ind     

Mononuclear hydridocarbonyl ruthenium complexes incorporating N2O2 bis-chelating ligands

The reactions of [RuH(CO)Cl(PPh₃)₃] with N,N^′-bis(salicylidine)-hydrazine (H₂bsh) and N,N^′-bis(salicylidine)-p-phenylene diammine (H₂bsp) in presence of KOH in methanol led in the formation of neutral mononuclear complexes with the formulations [RuH(CO)(PPh₃)₂(L)] (LHbsh or Hbsp). These present the first examples where the ligands H₂bsh or H₂bsp provide only two of its available donor sites for interaction with the metal centre. The complexes have been characterized by elemental analyses, FAB-MS, IR, ¹H, ¹³C, ³¹P NMR and electronic spectral studies. Molecular structure of the representative complex [RuH(CO)(PPh₃)₂(Hbsh)] have been determined by single crystal X-ray analysis.     

Synthesis and characterization of Fe2O3/SiO2 nanocomposites

Fe₂O₃/SiO₂ nanocomposites based on fumed silica A-300 (S_BET = 337 m²/g) with iron oxide deposits at different content were synthesized using Fe(III) acetylacetonate (Fe(acac)₃) dissolved in isopropyl alcohol or carbon tetrachloride for impregnation of the nanosilica powder at different amounts of Fe(acac)₃ then oxidized in air at 400–900 °C. Samples with Fe(acac)₃ adsorbed onto nanosilica and samples with Fe₂O₃/SiO₂ including 6–17 wt% of Fe₂O₃ were investigated using XRD, XPS, TG/DTA, TPD MS, FTIR, AFM, nitrogen adsorption, Mössbauer spectroscopy, and quantum chemistry methods. The structural characteristics and phase composition of Fe₂O₃ deposits depend on reaction conditions, solvent type, content of grafted iron oxide, and post-reaction treatments. The iron oxide deposits on A-300 (impregnated by the Fe(acac)₃ solution in isopropanol) treated at 500–600 °C include several phases characterized by different nanoparticle size distributions; however, in the case of impregnation of A-300 by the Fe(acac)₃ solution in carbon tetrachloride only α-Fe₂O₃ phase is formed in addition to amorphous Fe₂O₃. The Fe₂O₃/SiO₂ materials remain loose (similar to the A-300 matrix) at the bulk density of 0.12–0.15 g/cm³ and S_BET = 265–310 m²/g.     

Synthesis,electrochemical and in situ spectroelectrochemical studies of new transition metal complexes with two new Schiff-bases containing N2O2/N2O4 donor groups

New Schiff-base copper and cobalt complexes, [Cu(L¹)], [Cu(L²)] and [Co(L¹)], [Co(L²)] (where L¹ = N-N′-bis(3,5-di-tert-butylsalicylaldimine)-1,4-cyclohexane bis(methylamine) and L² = N-N′-bis(3,5-di-tert-butylsalicylaldimine)-1,8-diamino-3,6-dioxaoctane), were synthesized and characterized using elemental analysis, IR spectra, UV–Vis spectra, magnetic susceptibility measurements, ¹H and ¹³C NMR spectroscopy, thermal analysis and molar conductance (Λ_M). Their electro-spectrochemical properties were investigated using cyclic voltammetric (CV) and thin-layer spectroelectrochemical techniques in a dichloromethane solution (CH₂Cl₂). The CV of [Cu(L²)] showed a lower oxidation potential than that of [Cu(L¹)] under the same experimental conditions. The oxidation wave (II) of [Cu(L²)] was accompanied by an EC process (II′), which was not observed for [Cu(L¹)]. Also, [Cu(L²)] exhibited a reduction process, but [Cu(L¹)] did not. These results indicate that the Cu(II) ion in [Cu(L²)] is coordinated by N₂O₄ donor sites while [Cu(L¹)] presents a square-planar structure with N₂O₂ donor sites. Both oxidation processes for [Co(L¹)] and [Co(L²)] are based on the cobalt center, and they are assigned to Co(II)/Co(III) couples. The spectroelectrochemical results indicate that the oxidized species of [Cu(L²)] is similar to that of [Cu(L¹)], the only difference being that the absorption bands of the oxidized species for [Cu(L²)] shift to lower energy compared with those of [Cu(L¹)] because of their different coordination environment. The geometry of [Cu(L²)] changed into square-planar after the complex was totally oxidized and the neutral complex was only recovered following the EC process, as observed from the CV of [Cu(L²)]. For the two cobalt complexes, the bands corresponding to the π → π^∗transitions disappeared and new bands with small red shifts and of lower intensity were observed during the oxidation process. These new bands are attributed to the LMCT transition as observed in the case of the oxidation processes of the cobalt complexes.     

Synthesis and photoluminescence properties of BF2 complexes with 1,3-diketone ligands

BF₂ complexes with 1,3-diketone ligands were synthesized, and their optical and electrochemical properties were studied. The colors of the complexes varied depending on the structures of the 1,3-diketone ligands. The absorption and emission maxima of the complexes with 1,3-diaryl-1,3-diketone ligands were considerably red shifted as compared to those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands, suggesting an extended π-conjugation of the 1,3-diaryl-1,3-diketone moieties. The molar absorption coefficients and quantum yields of the complexes with 1,3-diaryl-1,3-diketone ligands were larger than those of the complexes with 1-aryl-3-trifluoromethyl-1,3-diketone ligands. Cyclic voltammetry measurements revealed that the reduction potentials of the BF₂ complexes were higher than those of the free ligands. These complexes exhibited various emission colors in the solid states due to the intermolecular interactions.     

Synthesis and characterization of calcium complexes containing eta 2-pyrazolato ligands

Treatment of calcium bromide with 3,5-di-tert-butylpyrazolatopotassium (2 equiv) in tetrahydrofuran afforded Ca(tBu2pz)2(THF)2 (69%). The reaction of this compound with pyridine (3 equiv), tetramethylethylenediamine (TMEDA, 1 equiv), N,N,N',N',N"-pentamethyldiethylenetriamine (PMDETA, 1 equiv), triglyme (1 equiv), and tetraglyme (1 equiv) yielded Ca(tBu2pz)2(py)3 (51%), Ca(tBu2pz)2(TMEDA) (74%), Ca(tBu2pz)2(PMDETA) (50%), Ca(tBu2pz)2(triglyme) (73%), and Ca(tBu2pz)2(tetraglyme) (57%), respectively. Treatment of the tetrahydrofuran adduct of Ca(Me2pz)2, generated in situ, with PMDETA (1 equiv), triglyme (1 equiv), and tetraglyme (1 equiv) afforded Ca(Me2pz)2(PMDETA) (65%), Ca(Me2pz)2(triglyme) (54%), and Ca(Me2pz)2(tetraglyme) (40%), respectively. The X-ray crystal structures of Ca(tBu2pz)2(py)3, Ca(tBu2pz)2(TMEDA), Ca(tBu2pz)2(PMDETA), Ca(tBu2pz)2(triglyme), and Ca(Me2pz)2(PMDETA) revealed six-, seven-, or eight-coordinate calcium centers with eta 2-pyrazolato ligands. Ca(tBu2pz)2(triglyme) sublimes at 160 degrees C (0.1 mmHg). The potential utility of these complexes as source compounds for chemical vapor deposition processes is discussed.     

Synthesis and characterization of three Cd(II) Schiff-base macrocyclic N3O2 complexes

Three polyamine ligands of N1-(2-nitrobenzyl)-N1-(2-aminoethyl)ethane-1,2-diamine (L₁), N1-(2-nitrobenzyl)-N1-(2-aminoethyl)propane-1,3-diamine (L₂) and N1-(2-nitrobenzyl)-N1-(3-aminopropyl)propane-1,3-diamine (L₃) were synthesized and their cyclocondensation with 2-[2-(2-formyl phenoxy)ethoxy]benzaldehyde (L₄) in the presence of various metal(II) ions was examined. These reactions only in the presence of a stoichiometric amount of cadmium(II) nitrate gave the related cadmium(II) macrocyclic Schiff-base complexes. In all the other cases no cyclic complexes have been obtained and metal(II) polyamines were the only products. The complexes have been studied with IR, ¹H NMR, ¹³C NMR, DEPT, COSY, HMQC and microanalysis. The crystal structures of [Cd(NO₃)(L₅)(μ-NO₃)Cd(NO₃)(L₅)]0.5Cd(NO₃)₄ (1) and [CdL₅(NO₃)(CH₃OH)]ClO₄ (2) have been also determined.     

Synthesis and characterization of SnOx/Al2O3 derived gel catalysts

SnO_x/Al₂O₃ catalysts were prepared by the sol-gel method using as starting reactants aluminium-tri-s-butoxide and (i) tetrabutyltin, (ii) tin tetrachloride and (iii) tin tetra-t-amyloxide. The gel derived catalysts show acidities of 0.72, 1.08 and 1.05 mol NH₃/m² and BET areas of 91, 112 and 189 m²/g. The activity and selectivity pattern for isopropanol decomposition were found to depend strongly on the tin precursor used.     

Synthesis and characterization of sodium titanates Na2Ti3O7 and Na2Ti6O13

Na₂Ti₃O₇ and Na₂Ti₆O₁₃ were synthesized by sol-gel method in order to obtain pure phases. Different heat-treatments were applied on powders and pellets of these materials. The effects were studied by XRD, dilatometry, TGA-DTA, SEM and electrochemical impedance spectroscopy. Pure Na₂Ti₃O₇ was obtained at 973 K. Sintering at 1373 K caused a partial decomposition into Na₂Ti₆O₁₃. The Na₂Ti₃O₇ powder sintered at 1273 K showed polygonal microstructure. Na₂Ti₃O₇ pellets sintered at 1323 K for 10 h exhibited large structures. This latter microstructure decreased the electrical conductivity of Na₂Ti₃O₇. Pure Na₂Ti₆O₁₃ was obtained at 873 K. Sintering at 1073 K caused a partial decomposition into TiO₂ (rutile). Na₂Ti₆O₁₃ pellets sintered at 1323 K for 10 h exhibited common shrinkage behavior. This shrinkage process increased the electrical conductivity of this material. The presence of TiO₂ resulted in a oxygen partial pressure dependence of the electrical conductivity.     

Synthesis,characterization, electrochemical behaviour and X-ray crystal structures of nickel(II) complexes with a N2O4 donor set macrocyclic Schiff base ligand

Two nickel(II) complexes of [1 + 1] macrocyclic Schiff base ligand (L) have been prepared by cyclocondensation reactions between 1,3-diamino-2-propanol and 2-[3-(2-formylphenoxy)-2-hydroxypropoxy] benzaldehyde, using NiX₂ (X = Br, and I) salts as template agents, and characterized by elemental analyses, IR, molar conductivity and electronic spectra in both solid and solution states. The single-crystal X-ray diffractions of the complexes are also reported that contain nickel(II) ion in a distorted octahedral geometry coordination of N₂O₃X (X = Br, I and NO₃). In all complexes the ligand behaves as a pentadentate ligand. Cyclic voltammetric studies of nickel(II) complexes indicate a quasi-reversible redox wave in the negative potential range.     

La3Os2O10, a new compound containing isolated clusters Os2O10 with metal-metal bonds

The formula of a new compound isolated in the LaOsO system has been established by means of crystal structure determination. There are two La₃Os₂O₁₀ units in a face-centered monoclinic unit cell (S.G. $\text{C2}\text{m}$); a = 7.911(2) Å, b = 7.963(2) Å, c = 6.966(2)Å, β = 115.76(2)°;. For 1082 intensities, collected on an automated single-crystal diffractometer, the final R value was 0.025 after absorption corrections. The structure consists of isolated Os₂O₁₀ clusters composed of two edge-shared OsO₆ octahedra. These dimeric units are connected together by two types of La³⁺ ions in eightfold coordination. In view of the OsOs distance inside the pair (2.462 Å), La₃Os₂O₁₀ provides an example of metal-metal bonding involving a transition metal in a half-integral formal oxidation state of 5.5.     

Hydrogenation of BF2 complexes with 1,3-dicarbonyl ligands

The catalytic hydrogenation (H₂, Pd/C) of a set of BF₂ complexes with a 1,3-dicarbonyl structural unit leading to monocarbonyl compounds has been studied. The transformation presented is general for the aryl-substituted derivatives and occurs under mild conditions (H₂, 1 bar, 25 °C) in methanol or THF.     

Sm2O3Ga2O3 and Gd2O3Ga2O3 phase diagrams

Four definite compounds exist in the Sm₂O₃Ga₂O₃ binary phase diagram, namely: Sm₃GaO₆, Sm₄Ga₂O₉, SmGaO₃, and Sm₃Ga₅O₁₂. The $\text{3}\text{1}$ compound is orthorhombic (space group Pnna - Z.4) with the cell parameters: a = 11.40₀Å, b = 5.51₅Å, c = 9.07Å and belongs to the oxysel family. Sm₃GaO₆ and SmGaO₃ melt incongruently at 1715 and 1565°C; Sm₄Ga₂O₉ and Sm₃Ga₅O₁₂ have a congruent melting point at 1710 and 1655°C. With regard to the Gd₂O₃Ga₂O₃ system three definite compounds have been identified: Gd₃GaO₆, Gd₄Ga₂O₉, and Gd₃Ga₅O₁₂. Only the garnet melts congruently at 1740°C with the following composition: Gd_3.12Ga_4.88O₁₂. Gd₃GaO₆, and Gd₄Ga₂O₉ melt incongruently at 1760 and 1700°C. GdGaO₃ is only obtained by melt overheating which may yield an equilibrium or a metastable phase diagram.     

Interaction of propylene with a V2O5/Al2O3 catalyst

IR-spectroscopic studies indicate that on the oxidized surface of V₂O₅/Al₂O₃ catalysts propylene interacts mainly with Brönsted acid centers to form an alcoholate type complex transforming into acetone. On the reduced surface propylene is stabilized as a -complex of V³⁺ and V⁴⁺ ions.

---

- , V₂O₅/Al₂O₃ , . - V³⁺ V⁴⁺.

     

Synthesis and crystal structure of Zn2VO(PO4)2, a vanadyl(IV) orthophosphate containing a dimer of edge-sharing ZnO5 square pyramids

Reactions in the ZnO---VO₂---P₂O₅ system afford the new phase Zn₂VO(PO₄)₂, the structure of which was determined by the single-crystal X-ray diffraction method (I4cm, A = 8.9227(13), C = 9.039(3) Å, Z = 4, R = 0.026 for 228 unique reflections). The structure consists of infinite chains of corner-sharing VO₆ octahedra along the c-axis and finite chains of edge-sharing ZnO₅ and PO₄ polyhedra parallel to the 110 directions. The VO₆ octahedra are distorted such that alternately long and short V---O bonds along the axis of the infinite chain are formed. The Zn²⁺ ions exhibit a square pyramidal coordination.     

Growth and characterization of thin films of Y2O3, La2O3 and La2CuO4

Films of Y₂O₃, La₂O₃, and La₂CuO₄ were prepared by an ultrasonic nebulization and pyrolysis method using acetylacetonates of the corresponding metals in alcohol solvents as source materials. Homogeneous, uniform films with good adherence have been obtained using this simple technique. As-deposited yttrium and lanthanum oxide films were poorly crystallized. After postannealing in oxygen at higher temperature, they crystallized into cubic and hexagonal phases, respectively. Transparent yttrium and lanthanum oxide films have high electric breakdown voltages. Single phase polycrystalline La₂CuO₄ thin films were obtained from a source solution with a La:Cu ratio of 2:1.     

Synthesis, characterization and performance of vanadium hexacyanoferrate as electrocatalyst of H2O2

The present work reports for the first time on the synthesis, characterization and performance of vanadium hexacyanoferrate (VHCF) as electrocatalyst of hydrogen peroxide. VHCF was synthesized by mixing V₂O₅ · nH₂O xerogel with ascorbic acid and K₄[Fe(CN)₆] in double distilled water. X-ray powder diffraction, energy dispersive spectroscopy, scanning electron microscopy, and IR-spectroscopy data suggest the formation of nanocrystalline (mean crystal size 11 nm) compound with a tentative molecular formula K₂(VO)₃[Fe(CN)₆]₂. Composite films of VHCF with poly(vinyl alcohol) were developed over a glassy carbon electrode, and then covered with different (neutral, positively or negatively charged) membranes. The effect of each membrane on the working stability of the resultant sensors was evaluated. Cyclic voltammetry experiments showed that composite films exhibit a pair of reversible redox peaks, and a remarkable low potential electrocatalysis on both the reduction and oxidation of hydrogen peroxide. A linear calibration curve over the concentration range 0.01–3.0 mM H₂O₂ was constructed. Limit of detection (S/N = 3) of 4 μM H₂O₂ was calculated. The proposed transducer is quite selective to hydrogen peroxide. No response was observed in the presence of 10 mM ascorbic acid.     

The characterization of Ba3Re2O9 and Sr3Re2O9

The compounds Ba₃Re₂O₉ and Sr₃Re₂O₉ were prepared by the solid state reaction of the corresponding alkaline-earth oxide with ReO₃ at 750 to 900°C in sealed, evacuated, fused silica tubes. The two compounds are isostructural, having the nine-layer ABO₃ structure with vacant central octahedra. The unit cell parameters are given. The magnetic susceptibility for Ba₃Re₂O₉ indicates Curie-Weiss behavior with a Re⁶⁺ moment having localized electrons. The magnetic data for Sr₃Re₂O₉ suggest delocalized electron behavior from its temperature-independent susceptibility. Both compounds appear to have semiconducting properties, but the strontium analog is a better conductor. Both compounds are unstable when heated in air above 400°C. They are readily decomposed by chemical oxidizing agents.