Polymers from 4,4′-thiodiphenol

Polyesters were made with aromatic diacid chlorides and 4,4,-thiodiphenol. Isophthaloyl chloride and/or terephthaloyl chloride were used as acid chlorides alone or together with 5-cyanoisophthaloyl chloride or [2.2]p-cyclophane-3,9-dicarboxylic acid chloride. The latter components were incorporated in order to make the polymers useful for crosslinking. A polyether could be obtained by polycondensation of 2,4-dichloro-benzonitrile and 4,4′-thiodiphenol. The polycondensations were run in nitrobenzene as solvent.     

Polymers from 4,4′-sulfonyldiphenol

Several polymers have been prepared from 4,4′-sulfonyldiphenol (SDP) or its bis-phenate salt as the nucleophile in condensation polymerizations. Ester-sulfone-amic acid polymers were of fairly high molecular weight, and could be imidized. Soluble film-forming poly ether-ester-sulfones were prepared from diphenyl ether diacid chloride.     

Alkene Metathesis – A Tool for the Synthesis of Conjugated Polymers

Alkene metathesis is a superb methodology. We report the progress using alkene metathesis in the synthesis of polymeric organic semiconductors. Three classes of polymers have been synthesized using acyclic diene metathesis (ADMET) or ring opening metathesis polymerization (ROMP), viz., poly(acetylene)s (PA), poly(arylene‐vinylene)s (PAV), and organometallic polymers. For PAs, ROMP of cyclooctatetraenes is best, whereas for PAV, both ADMET and indirect and direct ROMP are viable. Metathesis performs flawlessly with the correct monomers, as molybdenum and particularly the robust Ru carbenes demonstrate. When performing ROMP, one is often rewarded with structurally uniform polymers that can display very low polydispersities. Overall, metathesis is a powerful tool for the preparation of semiconducting polymers.     

Natural Products ‐ New Potential Drugs and New Tools for Cell Biology

Mit etwa 120 Teilnehmern, davon 18 aus der Industrie, fand die fünfte internationale Vortragstagung der Innovationsoffensive„Biologisch aktive Naturstoffe ‐ Synthetische Diversität”︁ des Landes Niedersachsen Mitte Februar im Gästehaus der Universität Hannover statt. Das auch bei Studenten beliebte Symposium stand dieses Jahr unter dem Motto„Natural Products ‐ New Potential Drugs and New Tools for Cell Biology”︁ und befasste sich erneut mit Fragen aus dem Grenzgebiet zwischen Biologie und Chemie.     

D–π–A–π–A Strategy to Design Benzothiadiazole–carbazole‐based Conjugated Polymer with High Solar Cell Voltage and Enhanced Photocurrent

The theoretical calculations are used to find that D–π–A–π–A style conjugated polymer PC‐TBTBT is more efficient for solar cells application than the D–π–A analog PC‐TBT because the D–π–A–π–A structure has a narrower band gap and higher molar absorption coefficient and redshift spectrum. Motivated by the theoretical prediction, 5,6‐bis(octyloxy)‐2,1,3‐benzothiadiazole and 2,7‐carbazole are adopted to synthesize the D–π–A–π–A style PC‐TBTBT (M_w = 31.1 kDa) and D–π–A analog PC‐TBT (M_w = 87.5 kDa) by Suzuki coupling reaction. Experimental results confirm that D–π–A–π–A PC‐TBTBT ‐based solar cell shows a power conversion efficiency (PCE) of 4.74% with high V_OC of 0.99 V and enhanced J_SC of 9.70 mA cm⁻². The PCE and J_SC achieve improvements of 17% and 26%, respectively, compared to the D–π–A PC‐TBT ‐based solar cell.

     

[B(O–C6H4–CN)4]– based Silver and Copper Coordination Polymers

A series of new coordination polymers bearing the [B(O–C₆H₄–CN)₄]^– anion was synthesized. Two new, one dimensional coordination frameworks of the type M[B(O–C₆H₄–CN)₄] (M = Ag, Cu) were obtained by salt metathesis. The reactivity towards organic Lewis‐bases was studied. The reaction with bidentate ligands yielded two dimensional networks with the general formula [M(L)][B(O–C₆H₄–CN)₄] {L = 2,2′‐bipyridine, 4,4′‐bipyridine, 1,2‐bis(pyridyl)ethane, 1,4‐diazabicyclo[2.2.2]octane}. The synthesis, properties and single crystal structure are reported.     

Breast Cancer Stem Cell Potent Copper(II)–Non‐Steroidal Anti‐Inflammatory Drug Complexes

The breast cancer stem cell (CSC) potency of a series of copper(II)–phenanthroline complexes containing the nonsteroidal anti‐inflammatory drug (NSAID), indomethacin, is reported. The most effective copper(II) complex in this series, 4 , selectivity kills breast CSC‐enriched HMLER‐shEcad cells over breast CSC‐depleted HMLER cells. Furthermore, 4 reduces the formation, size, and viability of mammospheres, to a greater extent than salinomycin, a potassium ionophore known to selectively inhibit CSCs. Mechanistic studies revealed that the CSC‐specificity observed for 4 arises from its ability to generate intracellular reactive oxygen species (ROS) and inhibit cyclooxygenase‐2 (COX‐2), an enzyme that is overexpressed in breast CSCs. The former induces DNA damage, activates JNK and p38 pathways, and leads to apoptosis.     

Polymers from a levopimaric acid–acrylonitrile Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylonitrile was efficiently prepared from resin acids. Excellent addition reaction yields (ca. 95%) were obtained. The adduct was converted into polyamides by polycondensation with diamines. When the same adduct was subjected to a dehydrodecarboxylation reaction, a novel ketone dinitrile derivative was obtained. This trifunctional product was also converted into polyamides by polycondensation with diamines. When the ketone dinitrile was hydrolyzed in the presence of alkalies and the reaction product was chlorinated, a ketone diacid chloride was obtained. A polyester was synthesized by the polycondensation of the diacid chloride with a diol. The structures of the Diels–Alder adduct, ketone dinitrile derivative, ketone diacid chloride, and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyamides and the polyester were low‐molecular‐weight polymers soluble in polar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were fairly thermostable substances, except the polyester, which appeared to be a substance with good thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6308–6322, 2005     

Polymers from a levopimaric acid–acrylic acid Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylic acid was efficiently prepared from resin acids. When the adduct was subjected to a dehydrodecarboxylation reaction, a ketone diacid derivative was obtained. New ketone type linear polymers were synthesized by the advanced dehyrodecarboxylation, a nonconventional polycondensation reaction, of both the above in presence of sulfonic catalysts. The polyketones turned out to be excellent tackifiers in adhesive formulae. The ketone polymers were condensed with diamines to give crosslinked polyazomethines. The structures of the monomers and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyketones and polyazomethines were low‐molecular‐weight polymers, soluble in some polar and nonpolar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were substances with good thermal stability, except the polyazomethine synthesized by the condensation of polyketone with an aromatic diamine, which appeared to be a substance with high thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5979–5990, 2007     

Gold Nanoparticles for Biology and Medicine

Gold colloids have fascinated scientists for over a century and are now heavily utilized in chemistry, biology, engineering, and medicine. Today these materials can be synthesized reproducibly, modified with seemingly limitless chemical functional groups, and, in certain cases, characterized with atomic‐level precision. This Review highlights recent advances in the synthesis, bioconjugation, and cellular uses of gold nanoconjugates. There are now many examples of highly sensitive and selective assays based upon gold nanoconjugates. In recent years, focus has turned to therapeutic possibilities for such materials. Structures which behave as gene‐regulating agents, drug carriers, imaging agents, and photoresponsive therapeutics have been developed and studied in the context of cells and many debilitating diseases. These structures are not simply chosen as alternatives to molecule‐based systems, but rather for their new physical and chemical properties, which confer substantive advantages in cellular and medical applications.     

Coordination Polymers of Bipyridyldicarboxylates – a Cobalt Containing 12,3‐net with Potential Reactive Sites

The porous cobalt(II) coordination polymer [Co{2,2′‐bipy‐4,4′(CO₂)₂}(H₂O)₂] ( 1 ) was prepared via a hydrothermal synthesis approach starting from Co(NO₃)₂ · 6 H₂O and 2,2′‐bipyridine‐4,4′‐dicarboxylic acid in a one to one mixture of ethanol and water at 120 °C. The product was characterized by single crystal X‐ray diffraction, TGA and elemental analysis. Space group: P3₁21, unit cell dimensions at –73 °C: a = 11.980(2), c = 8.335(2) Å, R = 0.032, wR² (all data) = 0.048. The structure determination revealed 1 to be a network in which octahedrally coordinated cobalt atoms are arranged to form a (12,3) net.     

Multidimensional Mass Spectrometry of Synthetic Polymers and Advanced Materials

Multidimensional mass spectrometry interfaces a suitable ionization technique and mass analysis (MS) with fragmentation by tandem mass spectrometry (MS²) and an orthogonal online separation method. Separation choices include liquid chromatography (LC) and ion‐mobility spectrometry (IMS), in which separation takes place pre‐ionization in the solution state or post‐ionization in the gas phase, respectively. The MS step provides elemental composition information, while MS² exploits differences in the bond stabilities of a polymer, yielding connectivity and sequence information. LC conditions can be tuned to separate by polarity, end‐group functionality, or hydrodynamic volume, whereas IMS adds selectivity by macromolecular shape and architecture. This Minireview discusses how selected combinations of the MS, MS², LC, and IMS dimensions can be applied, together with the appropriate ionization method, to determine the constituents, structures, end groups, sequences, and architectures of a wide variety of homo‐ and copolymeric materials, including multicomponent blends, supramolecular assemblies, novel hybrid materials, and large cross‐linked or nonionizable polymers.