Hydrogen effects in propylene polymerization reactions with titanium‐based Ziegler–Natta catalysts. II. Mechanism of the chain‐transfer reaction

Hydrogen is a very effective chain‐transfer agent in propylene polymerization reactions with Ti‐based Ziegler–Natta catalysts. However, measurements of the hydrogen concentration effect on the molecular weight of polypropylene prepared with a supported TiCl₄/dibutyl phthalate/MgCl₂ catalyst show a peculiar effect: hydrogen efficiency in the chain transfer significantly decreases with concentration, and at very high concentrations, hydrogen no longer affects the molecular weight of polypropylene. A detailed analysis of kinetic features of chain‐transfer reactions for different types of active centers in the catalyst suggests that chain transfer with hydrogen is not merely the hydrogenolysis reaction of the Ti? C bond in an active center but proceeds with the participation of a coordinated propylene molecule. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1899–1911, 2002     

Microwave Accelerated Polymerization of 2‐Phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine: Kinetics and Influence of End‐Groups on Glass Transition Temperature

Summary: The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine (PhOZI) with methyl tosylate (MeOTs) and butyl iodide (BuI) as initiators were performed in refluxing butyronitrile. Reaction kinetics under microwave irradiation was compared with conventional oil bath heating. The polymerization rates, under microwave irradiation, showed an acceleration by a factor of 1.8 (independently from the used initiator). The investigation of the thermal properties of the obtained poly(N‐benzoyl‐trimethyleneimine) showed the influence of molecular weight and end‐groups on the glass transition temperature.

The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine performed in refluxing butyronitrile.     

Thermal Decomposition Behavior and Non-isothermal Decomposition Reaction of Copper（ll） Salt of 4-Hydroxy-3,5-dinitropyridine Oxide and Its Application in Solid Rocket Propellant

The thermal decomposition behavior and kinetic parameters of the exothermic decomposition reactions of the title compound in a temperature‐programmed mode have been investigated by means of DSC, TG‐DTG and lower rate Thermolysis/FTIR. The possible reaction mechanism was proposed. The critical temperature of thermal explosion was calculated. The influence of the title compound on the combustion characteristic of composite modified double base propellant containing RDX has been explored with the strand burner. The results show that the kinetic model function in differential form, apparent activation energy E_a and pre‐exponential factor A of the major exothermic decomposition reaction are 1‐a,207.98 kJ*mol^?1 and 10^15.64 s^?1, respectively. The critical temperature of thermal explosion of the compound is 312.87 C. The kinetic equation of the major exothermic decomposition process of the title compound at 0.1 MPa could be expressed as: dα/dT=10^16.42 (1–α)e‐2.502×10⁴/T As an auxiliary catalyst, the title compound can help the main catalyst lead salt of 4‐hydroxy‐3,5dinitropyridine oxide to enhance the burning rate and reduce the pressure exponent of RDX‐CMDB propellant.     

A Novel Thin‐Film Copper Array Based on an Organic/Inorganic Sensor Hybrid: Microfabrication,Potentiometric Characterization,and Flow‐Injection Analysis Application

A first step towards the microfabrication of a thin‐film array based on an organic/inorganic sensor hybrid has been realized. The inorganic microsensor part incorporates a sensor membrane based on a chalcogenide glass material (Cu‐Ag‐As‐Se) prepared by pulsed laser deposition technique (PLD) combined with an PVC organic membrane‐based organic microsensor part that includes an o‐xylyene bis(N,N‐diisobutyl‐dithiocarbamate) ionophore. Both types of materials have been electrochemically evaluated as sensing materials for copper(II) ions. The integrated hybrid sensor array based on these sensing materials provides a linear Nernstian response covering the range 1×10^?6–1×10^?1 mol L^?1 of copper(II) ion concentration with a fast, reliable and reproducible response. The merit offered by the new type of thin‐film hybrid array includes the high selectivity feature of the organic membrane‐based thin‐film microsensor part in addition to the high stability of the inorganic thin‐film microsensor part. Moreover, the thin‐film sensor hybrid has been successfully applied in flow‐injection analysis (FIA) for the determination of copper(II) ions using a miniaturized home‐made flow‐through cell. Realization of the organic/inorganic thin‐film sensor hybrid array facilitates the development of a promising sophisticated electronic tongue for recognition and classification of various liquid media.     

Kinetics and electron spin resonance study of the radical polymerization of n‐butyl acrylate mediated by a nitroxide precursor: C‐phenyl‐N‐tert‐butylnitrone

The C‐phenyl‐N‐tert‐butylnitrone/azobisisobutyronitrile pair is able to impart control to the radical polymerization of n‐butyl acrylate as long as a two‐step process is implemented, that is, the prereaction of the nitrone and the initiator in toluene at 85 °C for 4 h followed by the addition and polymerization of n‐butyl acrylate at 110 °C. The structure of the in situ formed nitroxide has been established from kinetic and electron spin resonance data. The key parameters (the dissociation rate constant, combination rate constant, and equilibrium constant) that govern the process have been evaluated. The equilibrium constant between the dormant and active species is close to 1.6 × 10^?12 mol L^?1 at 110 °C. The dissociation rate constant and the activation energy for the C? ON bond homolysis are 1.9 × 10^?3 s^?1 and 122 ± 15 kJ mol^?1, respectively. The rate constant of recombination between the propagating radical and the nitroxide is as high as 1.2 × 10⁹ L mol^?1 s^?1. Finally, well‐defined poly(n‐butyl acrylate)‐b‐polystyrene block copolymers have been successfully prepared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6299–6311, 2006     

Organic solvent‐free catalytic hydrogenation of diene‐based polymer nanoparticles in latex form. Part II. Kinetic analysis and mechanistic study

The central challenge that has limited the development of catalytic hydrogenation of diene‐based polymer latex (i.e., latex hydrogenation) in large‐scale production pertains to how to accomplish the optimal interplay of accelerating the hydrogenation rate, decreasing the required quantity of catalyst, and eliminating the need for an organic solvent. Here, we attempt to overcome this dilemma through decreasing the dimensions of the polymer substrate (such as below 20 nm) used in the hydrogenation process. Very small diene‐based polymer nanoparticles were synthesized and then used as the substrates for the subsequent latex hydrogenation. The effects of particle size, temperature, and catalyst concentration on the hydrogenation rate were fully investigated. An apparent first‐order kinetic model was proposed to describe the rate of hydrogen uptake with respect to the concentration of the olefinic substrate (C?C). Mass transfer of both the hydrogen and catalyst involved in this solid (polymer)–liquid (water)–gas (hydrogen) three‐phase latex system is discussed. The competitive coordination of the catalyst between the C?C and acrylonitrile units within the copolymer was elucidated. It was found that (1) using very small diene‐based polymer nanoparticles as the substrate, the hydrogenation rate of polymer latex can be increased vastly to achieve a high conversion of 95% while a quite low level of catalyst loading is required; (2) this latex hydrogenation process was completely free of organic solvent and no cross‐linking was found; (3) the mass transfer of hydrogen is not a rate‐determining step in the present hydrogenation reactions; (4) the catalyst was dispersed homogeneously within the polymer nanoparticles; (5) for the reaction that has reached about 95 mol % conversion, the kinetic study shows that the reaction is chemically controlled with an apparent activation energy of 100–110 kJ/mol; (6) the strong coordination of C[tbond]N to the catalytically active species RhH₂Cl(PPh₃)₂ imposed a negative effect on the hydrogenation activity. The present research provides a comprehensive study to appreciate the underlying chemistry of latex hydrogenation of diene‐based polymer nanoparticles and more importantly shows great promise toward the commercialization of a “green” catalytic hydrogenation operation of a diene‐based polymer latex in industry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

1H NMR study of the kinetics of substituted aniline polymerization. II. Copolymerization of 2‐methoxyaniline and 3‐aminobenzenesulfonic acid

We investigated the kinetics of the oxidative chemical copolymerization of 2‐methoxyaniline (OMA) and 3‐aminobenzenesulfonic acid (MA) by monitoring monomer depletion with ¹H NMR spectroscopy. We adapted a semiempirical kinetic model, previously used for OMA homopolymerization, for the consumption of both OMA and MA monomers with a large difference in their reactivities. The OMA polymerization rate and end conversion showed a similar dependence on the reaction conditions, as described in the first part of this series, for its homopolymerization. Generally, the MA comonomer had an inhibition effect on the OMA polymerization rate. However, an increase in the initial MA concentration resulted in an increased OMA initiation rate. Because of the higher reactivity of OMA compared with that of MA, the OMA conversion began before the MA conversion, and both the initiation and propagation rates were higher than those for MA. The molar ratios of the converted monomers (MA/OMA) were always significantly lower than the corresponding MA/OMA feed fractions. They depended on the reaction conditions used for the copolymerization. In particular, higher oxidant or MA concentrations, higher temperatures, and a 1 M DCl concentration favored MA conversion, that is, its insertion into the copolymer. The MA end conversion was much smaller than that of OMA, only up to 23%; for a low oxidant concentration (oxidant/monomer‐deficient molar ratio), it was only 6%. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2482–2493, 2001     

Real‐time Fourier transform infrared study of the free‐radical ultraviolet‐induced polymerization of a hybrid sol–gel. II. The effect of physicochemical parameters on the photopolymerization kinetics

Free‐radical photocurable hybrid sol–gel materials have gained special interest during the last decades. Compared to thermally processed materials, they present the advantages of fast curing, low energy consumption, and spatiotemporal control of the reaction. Although comprehension of the photochemical step is fundamental, little is known about the characteristic of photochemistry in this kind of material. Real‐time Fourier transform infrared spectroscopy was used to study the photopolymerization of a hybrid sol–gel upon ultraviolet irradiation. Various photoinitiator systems were tested for their efficiency in inducing the polymerization of pendant polymerizable moieties anchored on a partially condensed silicate network. The presence of O₂ and the nature of the polymerizable function were shown to be crucial factors in the photoinduced process. The effects of the photoinitiator concentration and light intensity were also studied. These results were explained in terms of classical kinetic models developed for all‐organic photopolymers to point out the distinctive aspects related to the use of photoinitiated polymerization in hybrid sol–gel materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 831–840, 2003     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003     

Gas‐Phase Kinetics of Chlorosilylene Reactions II. ClSiH + C2H4: Absolute Rate Measurements and Quantum Chemical and RRKM Calculations for the Prototype π Addition Reaction

Time‐resolved studies of chlorosilylene, ClSiH, generated by the 193 nm laser flash photolysis of 1‐chloro‐1‐silacyclopent‐3‐ene, are carried out to obtain rate constants for its bimolecular reaction with ethene, C₂H₄, in the gas‐phase. The reaction is studied over the pressure range 0.13–13.3 kPa (with added SF₆) at five temperatures in the range 296–562 K. The second order rate constants, obtained by extrapolation to the high pressure limits at each temperature, fitted the Arrhenius equation: log(k^∞/cm³ molecule^?1 s^?1)=(?10.55±0.10) + (3.86±0.70) kJ mol^?1/RT ln10. The Arrhenius parameters correspond to a loose transition state and the rate constant at room temperature is 43 % of that for SiH₂ + C₂H₄, showing that the deactivating effect of Cl‐for‐H substitution in the silylene is not large. Quantum chemical calculations of the potential energy surface for this reaction at the G3MP2//B3LYP level show that, as well as 1‐chlorosilirane, ethylchlorosilylene is a viable product. The calculations reveal how the added effect of the Cl atom on the divalent state stabilisation of ClSiH influences the course of this reaction. RRKM calculations of the reaction pressure dependence suggest that ethylchlorosilylene should be the main product. The results are compared and contrasted with those of SiH₂ and SiCl₂ with C₂H₄.     

Y‐shaped diblock copolymer with epoxy‐based block of poly(glycidyl methacrylate): Synthesis,characterization, and its morphology study

A Y‐shaped diblock copolymer with a functional block poly(glycidyl methacrylate) was synthesized via the combination of enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). The synthetic procedure involved eROP of ε‐caprolactone (ε‐CL) in the presence of biocatalyst Novozyme 435 and initiator 1H,1H,2H,2H‐perfluoro‐1‐octaoxy, subsequently the resulting poly(ε‐caprolactone) (PCL) was converted to a macroinitiator by esterification of it with 2,2‐dichloro acetyl chloride, and finally the ATRP of glycidyl methacrylate (GMA) was conducted at 60 °C with CuCl/2,2′‐bipyridine as the catalyst system. By this process, we obtained copolymers with a controlled molecular weight and a low polydispersity. The structure and composition of the obtained polymers were characterized by H NMR, GPC, and IR. Linear first‐order kinetics, linearly increased molecular weight with conversion, and low polydispersities were observed for the ATRP of GMA. The thermal properties of the copolymer were characterized by differential scanning calorimetry. The self‐assembly behavior of the Y‐shaped block copolymer was also investigated in different solvents and at different concentrations. The aggregates of various morphologies (spheres, worm‐like patterns, nanowell patterns, and dendritic patterns) were observed. It was found that solvents remarkably influenced the morphologies of the films spin‐coated from the corresponding solutions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5509–5526, 2009     

Liquid‐crystalline azobenzene‐containing ferrocene‐based polymers: study on synthesis and properties of main‐chain ferrocene‐based polyesters with azobenzene in the side chain

Ferrocene‐based polymers are characterized by their electrochemical activity, good redox properties, thermal, photochemical stability, and liquid crystallinity, and thus they have various applications in different fields. A comprehensive investigation on the synthesis and properties of three novel main‐chain ferrocene‐based polyesters with azobenzene in the side chain (MFPAS) was carried out. The main‐chain ferrocene‐based polyester, poly(N‐phenyldiethanolamine 1,1′‐ferrocene dicarboxylate (PPFD), was synthesized via the solution polycondensation reaction of 1,1′‐ferrocenedicarbonyl chloride with phenyldiethanolamine (PDE). The novel MFPAS were synthesized via the post‐polymerization azo‐coupling reaction of PPFD with three different 4‐substituted anilines including 4‐nitroaniline, 4‐aminobenzoic acid, and 4‐aminobenzonitrile to produce 4‐nitrophenylazo‐functionalized‐PPFD (PPFD‐NT), 4‐carboxyphenylazo‐functionalized‐PPFD (PPFD‐CA), and 4‐cyanophenylazo‐functionalized‐PPFD (PPFD‐CN), respectively. All the synthesized polymers were characterized by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, and UV–visible spectroscopy. In addition, powder X‐ray diffraction patterns were measured for the synthesized polymers. The photoisomerization of the MFPAS was studied. The thermal properties of the MFPAS were studied using thermogravimetric analysis and differential scanning calorimetry. PPFD‐CA and PPFD‐CN were found to be more thermally stable than PPFD‐NT. Finally, the liquid‐crystalline properties of PPFD and the MFPAS were examined using polarized optical microscope. It was found that all the polymers possessed nematic phases and exhibited textures with schlieren disclinations. Copyright © 2012 John Wiley & Sons, Ltd.     

Copper(II) and Sodium(I) Complexes based on 3,7‐Diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane‐5‐oxide: Synthesis,Characterization, and Catalytic Activity

The reaction of 3,7‐diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane (DAPTA) with metal salts of Cu^II or Na^I/Ni^II under mild conditions led to the oxidized phosphane derivative 3,7‐diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane‐5‐oxide (DAPTA=O) and to the first examples of metal complexes based on the DAPTA=O ligand, that is, [Cu^II(μ‐CH₃COO)₂(κO‐DAPTA=O)]₂ ( 1 ) and [Na(1κOO′;2κO‐DAPTA=O)(MeOH)]₂(BPh₄)₂ ( 2 ). The catalytic activity of 1 was tested in the Henry reaction and for the aerobic 2,2,6,6‐tetramethylpiperidin‐1‐oxyl (TEMPO)‐mediated oxidation of benzyl alcohol. Compound 1 was also evaluated as a model system for the catechol oxidase enzyme by using 3,5‐di‐tert‐butylcatechol as the substrate. The kinetic data fitted the Michaelis–Menten equation and enabled the obtainment of a rate constant for the catalytic reaction; this rate constant is among the highest obtained for this substrate with the use of dinuclear Cu^II complexes. DFT calculations discarded a bridging mode binding type of the substrate and suggested a mixed‐valence Cu^II/Cu^I complex intermediate, in which the spin electron density is mostly concentrated at one of the Cu atoms and at the organic ligand.     

Kinetics,mass transfer,and thermodynamic and statistical modeling study for esterification of valeric acid with n‐butanol: Homogeneous and heterogeneous catalysis

The esterification of valeric acid with n‐butanol was studied with homogeneous and heterogeneous catalysts. The activity and performance of homogeneous p‐toluenesulfonic acid and heterogeneous cation exchange resin catalysts Amberlyst 36, Indion 190, and Amberlite IRC‐50 were evaluated. The pseudo‐homogeneous kinetic model was used to investigate the kinetic parameters of homogeneous‐ and heterogeneous‐catalyzed esterification. The UNIFAC (universal functional activity coefficient) approach was used to study the nonideality of the esterification reaction. The reaction was statistically modeled and optimized by the application of response surface methodology. The effects of independent variables such as reaction temperature, initial molar ratio, and catalyst loading on the conversion of valeric acid were investigated. The optimized conditions for the esterification reaction catalyzed by Amberlyst‐36 were found as temperature 360.4 K, initial molar ratio 3.8, and catalyst loading 6.7 wt%. The predicted conversion (89%) at these optimized conditions is in good agreement with the experimental conversion (87.3 ± 1.6%).     

Origin of the chemical stability of phosphine‐phosphoramidites: structural study of an UPPhos‐type crystal and application of UPPhos in the asymmetric hydrogenation of imines

Phosphine–phosphoramidites (PPAs) are heterobidentate ligands that have been developed in the last two decades and have been used successfully in asymmetric catalytic reactions. A single crystal of the PPA (11bS )‐N‐[(2S ,4S )‐4‐(diphenylphosphanyl)pentan‐2‐yl]‐N‐methyldinaphtho[2,1‐d :1′,2′‐f ][1,3,2]dioxaphosphepin‐4‐amine, C₃₈H₃₅NO₂P₂, was prepared and structurally characterized by single‐crystal X‐ray diffraction and density functional theory (DFT) calculations. Structure elucidation revealed unique features which might have a significant effect in the excellent chemical stability of this type of molecule. The conformation of the molecule provides an optimal chelating structure. Iridium complexes of UPPhos were found to be efficient catalysts in the asymmetric hydrogenation of imines {UPPhos is (11bS )‐N‐[(2S ,4S )‐4‐(diphenylphosphanyl)pentan‐2‐yl]‐N‐(propan‐2‐yl)dinaphtho[2,1‐d :1′,2′‐f ][1,3,2]dioxaphosphepin‐4‐amine}.     

The immobilized Ni(II)‐thiourea complex on silica‐layered copper ferrite: A novel and reusable nanocatalyst for one‐pot reductive‐acetylation of nitroarenes

In this study, magnetically nanoparticles of CuFe₂O₄@SiO₂@PTMS@Tu@Ni(II) as novel and reusable catalyst were prepared. Synthesis of the Ni (II)‐nanocatalyst was carried out through the complexation of Ni(OAc)₂·4H₂O with the immobilized thiourea on silica‐layered CuFe₂O₄. The prepared nanocomposite system was then characterized using SEM, EDX, XRD, VSM, ICP‐OES, Raman, UV–Vis and FT‐IR analyses. Catalytic activity of the Ni(II)‐CuFe₂O₄ system was investigated towards rapid reduction of aromatic nitro compounds to arylamines with sodium borohydride as well as one‐pot reductive‐acetylation of nitroarenes to acetanilides with NaBH₄/Ac₂O system without the isolation of intermediate arylamines. All reactions were carried out in H₂O within 3–7 min to afford the products arylamines/acetanilides in high to excellent yields. Reusability of the Ni(II)‐nanocatalyst was examined for seven consecutive cycles without the significant loss of the catalytic activity.     

Molecular heterogeneity of ethylene‐propylene rubbers: New insights through advanced crystallization‐based and chromatographic techniques

For a long time ethylene‐propylene rubber (EPR) copolymers with high comonomer contents were believed to be amorphous materials with a random copolymer composition. This is not completely correct as has been shown by temperature rising elution fractionation (TREF) combined with differential scanning calorimetry (DSC), crystallization analysis fractionation (CRYSTAF), and high temperature–high‐performance liquid chromatography (HT‐HPLC). When using only conventional crystallization‐based fractionation methods, the comprehensive compositional analysis of EPR copolymers was impossible due to the fact that large fractions of these copolymers do not crystallize under CRYSTAF conditions. In the present work, HT‐HPLC was used for the separation of the EPR copolymers according to their ethylene and propylene distributions along the polymer chains. These investigations showed the existence of long ethylene sequences in the bulk samples which was further confirmed by DSC. The results on the bulk samples prompted us to conduct preparative fractionations of EPR copolymers having varying ethylene contents using TREF. Surprisingly, significant amounts of crystallizing materials were obtained that were analyzed using a multistep protocol. CRYSTAF and DSC analyses of the TREF fractions revealed the presence of components with large crystallizable sequences that had not been detected by the bulk samples analyses. HT‐HPLC provided a comprehensive separation and characterization of both the amorphous and the crystalline TREF fractions. The TREF fractions eluting at higher temperatures showed the presence of ethylene‐rich copolymers and PE homopolymer. In order to obtain additional structural information on the separated fractions, HT‐HPLC was coupled to Fourier transform‐infrared (FT‐IR) spectroscopy. The FT‐IR data confirmed that the TREF fractions were separated according to the ethylene contents of the eluted samples. Preparative TREF analysis together with a combination of various analytical methods proved to be useful tools in understanding the complex molecular composition of these rubber samples. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 863–874