Efficient Catalytic Activity of Transition Metal Ions in Vilsmeier–Haack Reactions with Acetophenones

Vilsmeier–Haack (VH) formylation reactions with acetophenones are sluggish in acetonitrile medium even at elevated temperatures. However, millimolar concentrations of transition metal ions such as Cu(II), Ni(II), Co(II), and Cd(II) were found to exhibit efficient catalytic activity in Vilsmeier–Haack Reactions with acetophenones. Reactions are accelerated remarkably in the presence of transition metal ions. The VH reactions followed second order kinetics and afforded acetyl derivatives under kinetic conditions also irrespective of the nature of oxychloride (POCl₃ or SOCl₂) used for the preparation of VH reagent along with DMF. On the basis of UV–vis spectroscopic studies and kinetic observations, participation of a ternary precursor [M(II) S (VHR)] in the rate‐limiting step has been proposed to explain the mechanism of the metal ion–catalyzed VH reaction.     

Benzoylation of benzene and substituted benzenes catalyzed by superacid ZrO_2:H_2SO_4

Superacid ZrO_2:H_2SO_4 showed high activity in Friedel-Crafts benzoylation of benzeneand substituted benzenes such an chlorobenzene,toluene and 1,3,5-trimethylbenzene.Benzophenonesin 90-100% yields were obtained with catalytic amount of superacid ZrO_2:H_2SO_4.The calcinationtemperature greatly influenced the acid strength and activity of the superacid ZrO_2:H_2SO_4.Thesuperacid has both Lewis and Bronsted acid sites.The reversibility of Friedel-Crafts benzoylation andtransacylation were observed over the superacid.The used superacid could be readily regenerated andshowed identical benzoylation activity to toluene.     

N,N’-dimethyl formamide (DMF) mediated Vilsmeier–Haack adducts with 1,3,5-triazine compounds as efficient catalysts for the transesterification of β-ketoesters

Abstract

N, N’-dimethyl formamide (DMF) mediated Vilsmeier–Haack (VH) adducts with 1,3,5-triazine compunds such as trichloroisocyanuric acid (TCCA) and trichlorotriazine (TCTA) were prepared by replacing classical oxy chlorides POCl₃, and SOCl₂, which were explored as efficient catalysts for the transesterification of β-ketoesters. The prepared (TCCA/DMF) and (TCTA/DMF) adducts improved greenery of the classical Vilsmeier–Haack reagents (POCl₃/DMF), and (SOCl₂/DMF), and demonstrated their better efficient catalytic ativity. Reaction times were in the range: 3.5 to 6.5?hr (SOCl₂/DMF); 2.8–5.2?hr (POCl₃/DMF); 2.5–5.2?hr (TCCA/DMF) and 2.5–5.0?hr (TCTA/DMF) catalytic systems. Ultrasonically (US) assisted protocols with these reagents further reduced the reaction times (two to three times), while microwave assisted (MW) protocols with these reagents were much more effective. The reactions could be completed in only few seconds (less than a minute) in MWassisted protocols as compared to US assited reactions, followed by good product yields.     

Photocrosslinked poly(vinylbenzophenone)‐core micelles via mild Friedel–Crafts benzoylation of polystyrene amphiphiles

Photocrosslinkable poly(vinylbenzophenone)‐containing polymers were synthesized via a one‐step, Friedel–Crafts benzoylation of polystyrene‐containing starting materials [including polystyrene, polystyrene‐block‐poly(tert‐butyl acrylate), polystyrene‐block‐poly(ethylene oxide), polystyrene‐block‐poly(methyl methacrylate), and polystyrene‐block‐poly(n‐butyl acrylate)] with benzoyl trifluoromethanesulfonate as a benzoylation reagent. The use of this mild reagent (which required no added Lewis acid) permitted polymers with well‐defined compositions and narrow molecular weight distributions to be synthesized. Micelles formed from one of these benzoylated polymers, [polystyrene_0.25‐co‐poly(vinylbenzophenone)_0.75]₁₁₅‐block‐poly(acrylic acid)₁₄, were then fixed by the irradiation of the micelle cores with UV light. As the irradiation time was increased, the pendent benzophenone groups crosslinked with other chains in the glassy micelle cores. Dynamic light scattering, spectrofluorimetry, and Fourier transform infrared spectroscopy were all used to verify the progress of the crosslinking reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2604–2614, 2006     

Zirconyl triflate: A new, highly efficient and reusable catalyst for acetylation and benzoylation of alcohols, phenols, amines and thiols with acetic and benzoic anhydrides

Highly efficient acetylation and benzoylation of alcohols, phenols, amines and thiols with acetic and benzoic anhydrides catalyzed by new and reusable zirconyl triflate, ZrO(OTf)₂, is reported. The high catalytic activity of electron deficient ZrO(OTf)₂ can be used for the acetylation and benzoylation of not only primary alcohols but also sterically-hindered secondary and tertiary alcohols with acetic and benzoic anhydrides. Acetylation of phenols with acetic and benzoic anhydrides was achieved to afford the desired acetates and benzoates efficiently. This catalyst also efficiently catalyzed the acetylation and benzoylation of amines and thiols whereby the corresponding amides and thioesters were obtained in good to excellent yields. This catalyst can be reused several times without loss of its activity.     

Synthesis and spectroscopic properties for six 7,16-dibenzoylated tetraaza[14]annulene nickel(II) complexes

The condensation reaction between tetraaza[14]annulene nickel(II) complex and a series of para-substituted benzoyl chlorides gave the corresponding 7,16-dibenzoylated products in 53–98% yields. The mass spectra exhibit molecular ion peaks ascribed to the 7,16-dibenzoylated products. The intense ir band due to the C?O stretching mode in these nickel(II) complexes is present in the 1650–1658 cm^?1 range upon the benzoylation. Even though the ligand moiety of these six complexes is changed by benzoylation, the electronic spectra hardly vary. These nickel(II) complexes assume roughly the square-planar coordinations as judged by the ligand-field transition bands. The olefinic proton peaks at the 7- and 16-positions vanish on benzoylation in the proton nmr spectra and the proton signals of the para-substituted benzoyl groups are observed in the 2.4–8.4 ppm region. The results of the carbon-13 nmr spectra are compatible with those for the proton nmr spectra.     

Direct Synthesis of Hydroquinones from Quinones through Sequential and Continuous‐Flow Hydrogenation‐Derivatization Using Heterogeneous Au–Pt Nanoparticles as Catalysts

Pt–Au bimetallic nanoparticle catalysts immobilized on dimethyl polysilane (Pt–Au/(DMPSi‐Al₂O₃)) have been developed for selective hydrogenation of quinones to hydroquinones. High reactivity, selectivity, and robustness of the catalysts were confirmed under continuous‐flow conditions. Various direct derivatizations of quinones, such as methylation, acetylation, trifluoromethanesulfonylation, methacrylation, and benzoylation were successfully performed under sequential and continuous‐flow conditions to afford the desired products in good to excellent yields. Especially, air‐sensitive hydroquinones, such as anthrahydroquinones and naphthohydroquinones, could be successfully generated and derivatized under closed sequential and continuous‐flow conditions without decomposition.     

Synergistic Effect in the Catalysis by Pyridine N-Oxide-Triethylamine Mixture of Acyl Transfer Processes with Participation of Benzoyl, Diethoxyphosphinoyl, and p-Toluenesulfonyl Chlorides

The kinetics of benzoylation of substituted phenols with benzoyl chloride in the presence of pyridine N-oxide-triethylamine was analyzed with regard to previously reported data on benzoylation, phosphorylation, and sulfonylation of phenols and carboxylic acids. A common mechanism of the synergistic effect was established. The synergistic effect decreases in the series PhCOCl >> (EtO)₂POCl > TsCl.     

Selective and solventless oxidation of organic sulfides and alcohols using new supported molybdenum (VI) complex in microwave and conventional methods

A new dioxo-molybdenum (VI) complex supported on functionalized Merrifield resin ( MR-Mo ) has been synthesized and characterized by elemental, scanning electron mcroscopy, energy-dispersive X-ray analysis, TGA, Brunauer–Emmett–Teller method, powder-X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy and DRS–UV–vis analysis. The virgin Merrifield resin ( MR ) was functionalized by carbonylation followed by Schiff base formation with ethanolamine ( MR-SB ). Experimental data showed that the Schiff base coordinated with the MoO₂²⁺ moiety via O- and N-atoms. The catalytic activity of MR-Mo was explored under solventless conditions toward the oxidation of organic sulfides and alcohols using 30% aqueous H₂O₂ as oxidant. The oxidation reactions were conducted under microwave and conventional methods. The microwave-assisted oxidation reactions were found to be many times faster than the conventional methods. The oxidation reactions were selective and formed sulfoxides or aldehydes as the sole product with superior TOF values among the molybdenum (VI)-based complexes. Besides these, the MR-Mo was purely heterogeneous in nature and can be recycled for at least five reaction cycles without the loss of catalytic efficiency and product selectivity.     

Directly Regioselective Protection of Secondary Hydroxyl Group on Ribosides in Aqueous Solution

Selective benzoylation of secondary hydroxyl on sugar moiety of various ribosides including N‐ribosides, O‐ribosides and 2′‐deoxy‐N‐riboside was investigated by using benzoyl chloride and Na₂CO₃ in aqueous CH₃CN. The influence of the aglycone and sugar moiety on the selectivity of benzoylation was discussed as well. A most efficient method for preparation of 2′,3′‐O‐dibenzoylnucleosides was developed.     

Polystyrene-supported GaCl3: A new,highly efficient and recyclable heterogeneous Lewis acid catalyst for acetylation and benzoylation of alcohols and phenols

A new, simple and highly chemoselective method for both acetylation and benzoylation of alcohols and phenols with acetic anhydride in the presence of polystyrene-supported gallium trichloride (PS/GaCl₃) as a highly active and reusable heterogeneous Lewis acid catalyst is presented. In this catalytic system, primary, secondary and tertiary alcohols as well as phenols were converted to the corresponding acetates and benzoates with high yields. The heterogenized catalyst is of high reusability and stability in the acetylation reactions and was recovered several times with negligible loss in its activity or a negligible catalyst leaching, and also there is no need for regeneration. Remarkably, a selective mono-acetylation of symmetrical diols can be achieved chemoselectively by employing the same catalyst.     

Synthesis and characterization of Zr-SBA-15 supported tungsten oxide as a new mesoporous solid acid

A series of materials WO₃/Zr-SBA-15 were synthesized by modifying zirconium-incorporated SBA-15 mesoporous molecular sieve with various loadings of tungsten oxide, followed by calcining at different temperatures. The structures and the surface states of these materials were determined by XRD, TEM, N₂ adsorption–desorption and Raman spectroscopy, while the surface acidities were characterized by FT-IR spectroscopy of pyridine adsorption, NH₃-TPD, and the Hammett indicator method. To evaluate the catalytic activities of the prepared materials, the benzoylation of anisole was chosen as the model reaction. All the results reveal that the synthesized samples are strong solid acids, even solid superacids under some conditions, with uniform mesoporous structure and high surface area. The dispersion state of the supported WO₃, which depends on the WO₃ loading and the calcination temperature, has a direct influence on the acidity and catalytic activity of the materials. Moreover, the high acid strength is attributed to the WO bond nature of the complex formed by the interaction between WO₃ and the surface of Zr-SBA-15.     

Iodine-Mediated One-Pot Synthesis of 1,4,5-Substituted Pyrazoles from MBH Acetates via Allyl Hydrazone Intermediate

Herein, we report the regioselective one-pot synthesis of 1,4,5-trisubstituted pyrazoles by reacting Morita-Baylis-Hillman (MBH) acetates derived from aryl aldehydes with alkyl or aryl hydrazines in the presence of iodine under aerobic conditions. The reaction proceeds through sequential S_N2′ nucleophilic substitution of substituted hydrazine onto the MBH acetate, I₂-catalyzed oxidation of the allylic hydrazine to allylic hydrazone, heating-induced intramolecular aza-Michael reaction and cyclization, and oxidative aromatization. The key intermediate, the s-trans allyl hydrazones were isolated in good yields by performing the reactions at room temperature. However, the allyl hydrazones prepared from the MBH acetates of aliphatic aldehydes did not furnish the pyrazole owing to the absence of an activated methylene group in the substrate. The synthetic applications of the pyrazoles in Ugi reactions, decarboxylative halogenation, Pd-catalyzed benzoylation of the N-aryl ring, and metal-free tetrazole synthesis has been demonstrated.     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. III. Polymerization with SnCl4 and TiCl4 in the absence of additives

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the precision control (or the living nature) of the cationic polymerization of vinyl ethers with SnCl₄ or TiCl₄ critically depends on the Lewis acid concentration and temperature. Specifically, at an extremely low Lewis acid concentration, for example, the polymerization with the HCl–vinyl ether adduct (an initiator) is living at ?78 °C in CH₂Cl₂ solvent, whereas side reactions occurred at a higher concentration of SnCl₄ or at a higher temperature, ?15 °C. This was more pronounced with SnCl₄ than with TiCl₄, which was due to a stronger Lewis acidity of SnCl₄ as suggested by NMR analysis of the model reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1258–1267, 2001     

Theoretical study on the chemical fate of adducts formed through free radical addition reactions to carotenoids

It is well known that free radicals are responsible for oxidative stress and cause numerous health disorders. As a result, the study of molecules that can scavenge free radicals is significant. One of the most important classes of free radical scavengers are carotenoids (CAR). In this work, the effectiveness of the CAR in terms of the radical adduct formation (RAF) reaction is studied using density functional theory calculations (in polar and non-polar environments). The reactions between four CAR [β-carotene (BC), zeaxanthin (ZEA), canthaxanthin (CANTA) and astaxanthin (ASTA)] with eight different radicals (^?OH, ^?OOH, ^?CH₃, ^?O–CH₃, ^?OO–CH₃, ^?SH, ^?O–CH₂–CH=CH₂, and ^?OO–CH₂–CH=CH₂), as well as substantial further reactions involved in the radical chain propagation, are analyzed. According to our results, the RAF reactions are controlled to a larger extent by the nature of the free radical than by the particular CAR they are reacting with. Thermochemistry calculations predict that each CAR molecule is able to scavenge at least two free radicals, which would lead to the termination of the radical chain process. Epoxy and diepoxy CAR species can be formed, being epoxy molecules as good free radical scavengers as their parent CAR. ASTA and CANTA are predicted to be less reactive, when reacting through RAF mechanism, than BC and ZEA.     

Hot Electrons at Solid–Liquid Interfaces: A Large Chemoelectric Effect during the Catalytic Decomposition of Hydrogen Peroxide

The study of energy and charge transfer during chemical reactions on metals is of great importance for understanding the phenomena involved in heterogeneous catalysis. Despite extensive studies, very little is known about the nature of hot electrons generated at solid–liquid interfaces. Herein, we report remarkable results showing the detection of hot electrons as a chemicurrent generated at the solid–liquid interface during decomposition of hydrogen peroxide (H₂O₂) catalyzed on Schottky nanodiodes. The chemicurrent reflects the activity of the catalytic reaction and the state of the catalyst in real time. We show that the chemicurrent yield can reach values up to 10^?1 electrons/O₂ molecule, which is notably higher than that for solid–gas reactions on similar nanodiodes.     

Acidity and Catalytic Activity of Sulfate Modified Mixed Oxides of Tin and Praseodymium

A comparitive study of the acid-base properties and physico-chemical characteristics of pure SnO₂, sulfated SnO₂ and sulfated binary oxides of Sn and Pr was done. The data were correlated with the catalytic activity of the oxides towards benzoylation of toluene.     

Efficient and Selective Conversion of Trimethylsilyl and Tetrahydropyranyl Ethers to their Corresponding Acetates and Benzoates Catalyzed by Bismuth(III) Salts

 A variety of TMS and THP ethers are efficiently converted to their corresponding acetates and benzoates with acetic and benzoic anhydrides in the presence of catalytic amounts of Bi(III) salts such as BiCl₃, Bi(TFA)₃, and Bi(OTf)₃. The present method is also effective for the selective acetylation and benzoylation of TMS and THP ethers of alcohols in the presence of phenolic ethers.     

Catalytic Reactions with Hydrosilane and Carbon Monoxide [New synthetic methods (30)]

The reagent hydrosilane/carbon monoxide opens up new possibilities for organic synthesis. Four cases will be discussed: 1. The reaction of olefins with hydrosilane (trialkylsilane) and carbon monoxide in the presence of Co, Ru, and Rh complexes leads to enol silyl ethers having one more carbon atom that the olefins. 2. Cyclic ethers underto carbonylative ring opening to ω-siloxyaldehydes when reacted with hydrosilane and carbon monoxide in the presence of Co₂(CO)₈ as catalysts 3. Aldehydes are catalytically converted into the next higher α-siloxyaldehydes or 1,2-bis(siloxy)alkenes depending on the reaction conditions used. 4. The reaction of alkyl acetates proceeds in various ways depending on the nature of the alkyl group; enol silyl ethers or alkenes are optained.–Mechanisms of these Co₂(CO)₈ catalyzed reactions using hydrosilane and carbon monoxide are discussed in which HCo(CO)_n or R₃SiCo(CO)_nL function as catalytically active agents. With these species there are four types of catalytic cycles.–The synthetic possibilities of these catalytic reactions have still not been fully explored.     

Magnetically recoverable γ-Fe2O3 nanoparticles as a highly active catalyst for Friedel–Crafts benzoylation reaction under ultrasound irradiation

A simple, facile and efficient method has been developed for the Friedel–Crafts benzoylation of arenes using magnetic γ-Fe₂O₃ nanoparticles under solvent-free sonication. The γ-Fe₂O₃ nanoparticles were used as an efficient and magnetically recoverable catalyst for the synthesis of aromatic ketones in good to excellent yields at room temperature under solvent-free. The reaction occurred with high regioselectivity under mild condition. The magnetic γ-Fe₂O₃ nanoparticles are economically synthesized in large-scale, easily separated from the reaction mixture by an external magnet and able to be reused several times without significant loss of the catalytic performance, which make them easy application to industrial processes.