Analysis of volatile components in herbal pair Semen Persicae‐Flos Carthami by GC‐MS and chemometric resolution

Analysis of volatile components in herbal pair (HP) Semen Persicae‐Flos Carthami (SP‐FC) was performed by GC‐MS coupled with chemometric resolution method (CRM). Furthermore, temperature‐programmed retention indices were used together with mass spectra for identification of the volatile components. With the help of CRM, the two‐dimensional data obtained from GC‐MS instruments were resolved into a pure chromatogram and a mass spectrum of each chemical compound. By use of these methods upon two‐dimensional data, 26, 49, and 59 volatile chemical components in essential oils of single herb Semen Persicae, Flos Carthami, and HP SP‐FC were determined qualitatively and quantitatively, accounting for 78.42, 81.08, and 82.48% total contents of essential oil of single herb Semen Persicae, Flos Carthami, and HP SP‐FC, respectively. It is shown that the accuracy of qualitative and quantitative analysis can be enhanced greatly by means of CRM. It is further demonstrated that the numbers of volatile chemical components of HP SP‐FC are almost the addition of those of two single herbs, but the main volatile chemical components of the former are completely different from those of single herb Semen Persicae or Flos Carthami because of chemical reactions and physical changes occurring in the process of decocting two single herbs. This means that chemical components especially pharmacologically active compounds in the recipe might be different from those of single herbs.     

Positional isomer differentiation of synthetic cannabinoid JWH‐081 by GC‐MS/MS

Like many new designer drugs of abuse, synthetic cannabinoids (SC) have structural or positional isomers which may or may not all be regulated under law. Differences in acute toxicity may exist between isomers which impose further burden in the fields of forensic toxicology, medicine and legislation. Isomer differentiation therefore becomes crucial from these standpoints as new designer drugs continuously emerge with just minor positional modifications to their preexisting analogs. The aim of this study was to differentiate the positional isomers of JWH‐081. Purchased standard compounds of JWH‐081 and its positional isomers were analyzed by gas chromatography‐electron ionization‐mass spectrometry (GC‐EI‐MS) first in scan mode to investigate those isomers who could be differentiated by EI scan spectra. Isomers with identical or near‐identical EI spectra were further subjected to GC‐tandem mass spectrometry (MS/MS) analysis with appropriate precursor ions. EI scan was able to distinguish 3 of the 7 isomers: 2‐methoxy, 7‐methoxy and 8‐methoxy. The remaining isomers exhibited near‐identical spectra; hence, MS/MS was performed by selecting m/z 185 and 157 as precursor ions. 3‐Methoxy and 5‐methoxy isomers produced characteristic product ions that enabled the differentiation between them. Product ion spectrum of 6‐methoxy isomer resembled that of JWH‐081; however, the relative ion intensities were clearly different from one another. The combination of EI scan and MS/MS allowed for the regioisomeric differentiation of the targeted compounds in this study. Copyright © 2015 John Wiley & Sons, Ltd.     

Metabolite analysis in Curcuma domestica using various GC‐MS and LC‐MS separation and detection techniques

The metabolic profile of polar (methanol) and non‐polar (hexane) extracts of Curcuma domestica, a widely used medicinal plant, was established using various different analytical techniques, including GC‐FID, GC‐MS, HR‐GC‐MS and analytical HPLC‐ESI‐MS/MS by means of LTQ‐Orbitrap technology. The major non‐volatile curcuminoids curcumin, demethoxycurcumin and bisdemethoxycurcumin were identified when their chromatographic and precursor ion masses were compared with those of authentic standard compounds. In this paper we describe for the first time a GC/MS‐based method for metabolic profiling of the hydrophilic extract. We also identified 61 polar metabolites as TMS derivatives. Copyright © 2009 John Wiley & Sons, Ltd.     

新型除草剂及其杂质的LC-MS和GC-MS分析

High performance liquid chromatography (HPLC) and electrospray ionization mass spectrometry (ESI-MS) have been utilized to analyze the synthesized 2-(2-arylaminomethylphenoxy)pyrimidine derivatives, which are a new kind of environmentally benign herbicides and have passed the temporary pesticide registration. The identification of main product and impurities has been achieved according to the UV and mass spectra. Moreover, one impurity, introduced by the raw material in the last step of the synthetic route, was identified by GC-MS analysis. It can be concluded that the combination of chromatography and mass spectrometry, including LC-MS and GC-MS, provided a vital tool of the pesticide science.     

Trace quantification of 1‐triacontanol in beagle plasma by GC‐MS/MS and its application to a pharmacokinetic study

1‐Triacontanol (TA), a member of long chain fatty alcohol, has recently been received great attention owing to its antitumor activity. In this study, an accurate, sensitive and selective gas chromatography–tandem mass spectrometry method was developed and validated for the quantification of TA in beagle plasma using 1‐octacosanal as the internal standard (IS) for the first time. With temperature programming, chromatographic separation was carried out on an HP‐5MS column, using helium as carrier gas and argon as collision gas, both at a flow rate of 1 mL/min. TA was analyzed using positive ion electrospray ionization in multiple‐reaction monitoring mode, with the precursor to product ion transitions of m/z 495.6 → 97.0 and m/z 467.5 → 97.0 for TA and the IS, respectively. The lower limit of quantitation, linearity, intra‐ and interday precision, accuracy, stability, extraction recovery and matrix effect of TA were within the acceptable limits. The validated method was successfully applied to a pharmacokinetic study of TA in beagles. Copyright © 2014 John Wiley & Sons, Ltd.     

Efficient approach for the detection and identification of new androgenic metabolites by applying SRM GC‐CI‐MS/MS: a methandienone case study

Identification of anabolic androgenic steroids (AAS) is a vital issue in doping control and toxicology, and searching for metabolites with longer detection times remains an important task. Recently, a gas chromatography chemical ionization triple quadrupole mass spectrometry (GC‐CI‐MS/MS) method was introduced, and CI, in comparison with electron ionization (EI), proved to be capable of increasing the sensitivity significantly. In addition, correlations between AAS structure and fragmentation behavior could be revealed. This enables the search for previously unknown but expected metabolites by selection of their predicted transitions. The combination of both factors allows the setup of an efficient approach to search for new metabolites. The approach uses selected reaction monitoring which is inherently more sensitive than full scan or precursor ion scan. Additionally, structural information obtained from the structure specific CI fragmentation pattern facilitates metabolite identification. The procedure was demonstrated by a methandienone case study. Its metabolites have been studied extensively in the past, and this allowed an adequate evaluation of the efficiency of the approach. Thirty three metabolites were detected, including all relevant previously discovered metabolites. In our study, the previously reported long‐term metabolite (18‐nor‐17β‐hydroxymethyl,17α‐methyl‐androst‐1,4,13‐trien‐3‐one) could be detected up to 26 days by using GC‐CI‐MS/MS. The study proves the validity of the approach to search for metabolites of new synthetic AAS and new long‐term metabolites of less studied AAS and illustrates the increase in sensitivity by using CI. Copyright © 2016 John Wiley & Sons, Ltd.     

Trace analysis of alkaline flavors in cut tobacco by heart‐cutting multidimensional GC–GC–MS

Tobacco is a complex chemical matrix. The analysis of trace alkaline flavors in tobacco is very difficult because of the limited peak capacity of monodimensional GC. In the present study, a home‐assembled twin‐oven GC–GC–MS system, with MS detection in both dimensions, has been applied to the analysis of 20 alkaline volatiles in a variety of cut‐tobacco samples. By transferring nine and six heart‐cuts from the first apolar column to the second polar column in two separate runs, the potential mutual interference of adjacent isomeric targets and the complex matrix could be removed. For comparative purposes, a systematic comparison of both quantification and qualification results for the cut‐tobacco sample as quality control was conducted between GC–GC–MS and GC–MS. The results showed that GC–GC–MS provided higher accuracy in peak assignment and quantification. And in GC–MS, the interferences of co‐elution had caused both low matched similarity in peak assignment and false‐negative/‐positive results in quantification for some targets. Advantages of the developed GC–GC–MS method in the analysis of alkaline flavors are its high resolving power, reliability, and simplicity.     

Determination of phthalate esters in liquor samples by vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction followed by GC–MS

A novel method using vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction has been developed for the extraction of phthalate esters (PAEs) in Chinese liquor samples prior to analysis by GC–MS. In the proposed method, a high‐density extraction solvent (carbon tetrachloride) was dispersed into samples with the aid of a surfactant (Triton X‐100) and vortex agitation, resulting in a short extraction equilibrium (30 s). After centrifugation, a single microdrop of solvent was easily collected for GC–MS analysis. Key factors that affected the extraction efficiency were optimized. Under the optimum conditions, linearity was found in the range from 0.05 to 50 μg/L. Coefficients of determination varied from 0.9938 to 0.9971. LODs, based on an S/N of 3, ranged from 4.9 to 13 ng/L. Enrichment factors varied from 140 to 184. Reproducibility and recoveries were assessed by testing a series of three liquor samples that were spiked with different concentration levels. Finally, the proposed method was successfully applied to the determination of PAEs in 16 Chinese liquor samples. In this work, high‐density‐solvent vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction was applied for the first time for the extraction of PAEs in Chinese liquor samples and was proved to be simple, rapid, and sensitive.     

Determination of free formaldehyde in vaccines and biological samples using solid‐phase microextraction coupled to GC–MS

A headspace solid‐phase microextraction method coupled to GC–MS was successfully developed for the trace determination of formaldehyde in veterinary bacterial and human vaccines, and diphtheria–tetanus antigen. The formaldehyde was derivatized by means of the Hantzsch reaction prior to extraction and subsequent determination. Three different types of solid‐phase microextraction fibers, polar, and nonpolar poly(dimethylsiloxane) and polyethylene glycol were prepared by using a sol–gel technique. The effects of different parameters such as type of fiber coating, extraction time and temperature, desorption conditions, agitation rate, and salt effect were investigated. Under the optimized conditions, the detection limit of the method was 979 ng/L using the selected ion‐monitoring mode. The interday and intraday precisions of the developed method under the optimized conditions were below 13%, and the method shows linearity in the range of 1.75–800 μg/L with a correlation coefficient of 0.9963. The optimized method was applied to the determination of formaldehyde from some biological products. The results were satisfactory compared to the standard method.     

GC‐MS of amaryllidaceous galanthamine‐type alkaloids

Galanthamine‐type alkaloids produced by plants of the Amaryllidaceae family are potent acetylcholinesterase inhibitors. One of them, galanthamine, has been marketed as a hydrobromide salt for the treatment of Alzheimer's disease. In the present work, gas chromatography with electron impact mass spectrometry (GC‐EIMS) fragmentation of 12 reference compounds isolated from various amaryllidaceous plants and identified by spectroscopic methods (1D and 2D nuclear magnetic resonance, circular dichroism, high‐resolution MS (HRMS) and EIMS) was studied by tandem mass spectrometry (GC‐MS/MS) and accurate mass measurements (GC‐HRMS). The studied compounds showed good peak shape and efficient GC separation with a GC‐MS fragmentation pattern similar to that obtained by direct insertion probe. With the exception of galanthamine‐N‐oxide and N‐formylnorgalanthamine, the galanthamine‐type compounds showed abundant [M]^+. and [M‐H]⁺ ions. A typical fragmentation pattern was also observed, depending on the substituents of the skeleton. Based on the fragmentation pathways of reference compounds, three other galanthamine‐type alkaloids, including 3‐O‐(2′‐butenoyl)sanguinine, which possesses a previously unelucidated structure, were identified in Leucojum aestivum ssp. pulchelum, a species endemic to the Balearic islands. GC‐MS can be successfully applied to Amaryllidaceae plant samples in the routine screening for potentially new or known bioactive molecules, chemotaxonomy, biodiversity and identification of impurities in pharmaceutical substances. Copyright © 2012 John Wiley & Sons, Ltd.     

Rapid determination of parabens in personal care products by stable isotope GC‐MS/MS with dynamic selected reaction monitoring

In this study, a rapid and sensitive analytical method for the determination of methyl‐, ethyl‐, propyl‐, and butyl esters of para‐hydroxy benzoic acid (parabens) in personal care products was developed and fully validated. Test portions were extracted with methanol followed by vortexing, sonication, centrifugation, and filtration without derivatization. The four parabens were quantified by GC‐MS/MS in the electron ionization mode. Four corresponding isotopically labeled parabens were selected as internal standards, which were added at the beginning of the sample preparation and used to correct for recovery and matrix effects. Sensitivity, extraction efficiency, and recovery of the respective analytes were evaluated. The coefficients of determination (r²) were all greater than 0.995 for the four parabens investigated. The recoveries ranged from 97 to 107% at three spiked levels and a one‐time (single) extraction efficiency greater than 97% was obtained. This method has been applied to screen 26 personal care products. This is the first time that a unique GC‐MS/MS method with dynamic selected reaction monitoring and confirmation of analytes has been used to determine these parabens in cosmetic personal care products.     

Development of a mass spectrometric hydroxyl‐position determination method for the hydroxyindole metabolites of JWH‐018 by GC‐MS/MS

One of the many issues of designer drugs of abuse like synthetic cannabinoids (SCs) such as JWH‐018 is that details on their metabolism has yet to be fully elucidated and that multiple metabolites exist. The presence of isomeric compounds poses further challenges in their identification. Our group has previously shown the effectiveness of gas chromatography‐electron ionization‐tandem mass spectrometry (GC‐EI‐MS/MS) in the mass spectrometric differentiation of the positional isomers of the naphthoylindole‐type SC JWH‐081, and speculated that the same approach could be used for the metabolite isomers. Using JWH‐018 as a model SC, the aim of this study was to differentiate the positional isomers of its hydroxyindole metabolites by GC‐MS/MS. Standard compounds of JWH‐018 and its hydroxyindole metabolite positional isomers were first analyzed by GC‐EI‐MS in full scan mode, which was only able to differentiate the 4‐hydroxyindole isomer. Further GC‐MS/MS analysis was performed by selecting m/z 302 as the precursor ion. All four isomers produced characteristic product ions that enabled the differentiation between them. Using these ions, MRM analysis was performed on the urine of JWH‐018 administered mice and determined the hydroxyl positions to be at the 6‐position on the indole ring. GC‐EI‐MS/MS allowed for the regioisomeric differentiation of the hydroxyindole metabolite isomers of JWH‐018. Furthermore, analysis of the fragmentation patterns suggests that the present method has high potential to be extended to hydroxyindole metabolites of other naphthoylindole type SCs in identifying the position of the hydroxyl group on the indole ring. Copyright © 2016 John Wiley & Sons, Ltd.     

Ultra trace level determinations of acrylamide in surface and drinking water by GC–MS after derivatization with xanthydrol

A sensitive GC–MS method has been established for the determination of acrylamide in surface and drinking water based on derivatization with xanthydrol. Deuterated acrylamide (acrylamide‐d₃) was chosen as the internal standard for analyzing the water sample. The derivatization of acrylamide was performed directly in water, and the best reaction conditions (xanthydrol of 1.6 mM, HCl concentration of 0.05 M, reaction for 30 min at ambient temperature) were established by variation of parameters. Under the established conditions, the detection and quantification limits were 3.0 and 9.7 ng/L, respectively, and the interday RSD was less than 8% at concentrations of 20 and 100 ng/L.     

Development of an ASE‐GC‐MS/MS method for detecting dinitolmide and its metabolite 3‐ANOT in eggs

An accelerated solvent extraction coupled with gas chromatography‐tandem mass spectrometry (ASE‐GC‐MS/MS) method for detecting dinitolmide residue and its metabolite (3‐amino‐2‐methyl‐5‐nitrobenzamide, 3‐ANOT) in eggs was developed and optimized. The samples were extracted using ASE with acetonitrile as the extractant and were purified by passage through a neutral alumina solid‐phase extraction column. Then, the samples were analyzed using the GC‐MS/MS method. The optimized method parameters were validated according to the requirements set forth by the European Union and the Food and Drug Administration. The average recoveries of dinitolmide and 3‐ANOT from eggs (egg white, egg yolk, and whole egg) at the limit of quantification (LOQ), 0.5 maximum residue limit (MRL), 1 MRL, and 2 MRL were 82.74% to 87.49%, the relative standard deviations (RSDs) were less than 4.63%, and the intra‐day RSDs and the inter‐day RSDs were 2.96% to 5.21% and 3.94% to 6.34%, respectively. The limits of detection and the LOQ were 0.8 to 2.8 μg/kg and 3.0 to 10.0 μg/kg, respectively. The decision limits (CC_α) were 3001.69 to 3006.48 μg/kg, and the detection capabilities (CC_β) were 3001.74 to 3005.22 μg/kg. Finally, the new method was successfully applied to the quantitative determination of dinitolmide and 3‐ANOT in 50 commercial eggs from local supermarkets.     

Resolving overlapping GC–MS signals with a multistep screening chemometric approach for the fast determination of pesticides

For the rapid analysis of multicomponent mixtures using GC–MS, a chemometric multistep screening approach was proposed to extract the signals of the components from the overlapping signals measured with a very fast temperature program. At first, independent component analysis was used to find all the possible mass spectra from the overlapping signal in the moving windows along the retention time, and iterative target transformation factor analysis was employed to validate the existence of the extracted spectra from each window. Then, identical signals in the validated spectra were excluded using match ratio as a criterion. Finally, the chromatographic profiles for each spectrum were calculated using non‐negative immune algorithm, and the spectra with a reasonable profile were taken as the identified components. A mixture of 53 pesticides was analyzed with a very fast temperature program of 7 min. A total of 48 pesticides and 16 interferences were identified from the overlapping GC–MS signal.     

Comparison of silylation and esterification/acylation procedures in GC‐MS analysis of amino acids

Three derivatization agents used in GC analysis of amino acids were compared: N,O‐bis(trimethylsilyl)trifluoroacetamide, (BSTFA), N‐methyl‐N‐(tert‐butyldimethylsilyl)trifluoroacetamide (MTBSTFA), and isobutyl chloroformate (iBuCF). It was shown that the analytical characteristics achieved in the case of silylation with MTBSTFA are comparable to those obtained for esterification/acylation. However, since the former approach requires laborious sample preparation to isolate the compounds in question prior to derivatization, determination of amino acids as N(O,S)‐alkoxycarbonyl alkyl esters seems to be preferable in many cases. Application of the esterification/acylation procedure to analysis of lyophilized E. coli microbial culture was demonstrated.     

A fast and accurate isotope dilution GC‐IT‐MS/MS method for determination of eugenol in different tissues of fish: Application to a depletion study in mandarin fish

An accurate, rapid and effective method was established for determination of eugenol in plasma, muscle, skin, liver, kidney and gill of fish using gas chromatography–ion trap tandem mass spectrometry. Samples of muscle, skin, liver, kidney and gill were prepared using the modified QuEChERS (quick, easy, cheap, effective, rugged and safe) procedure, and a plasma sample was prepared by a liquid–liquid extraction procedure. Eugenol was monitored in <7 min using an electron‐ionization source in MS/MS mode and quantified by an internal standard of eugenol‐d₃. The limit of detection was 5.0 μg/kg, and the limit of quantification was 10.0 μg/kg. The calibration curve was linear in the range of 5–1000 μg/L (R² = 0.9996). Intra‐ and inter‐day precisions of eugenol expressed as relative standard deviation were within 9.74%, and the accuracy exhibited a relative error ranging from −2.20 to 8.89%. The developed method was successfully used to study the elimination regularity of eugenol in mandarin fish.     

Assessment of dispersive liquid–liquid microextraction for the simultaneous extraction,preconcentration, and derivatization of Hg2+ and CH3Hg+ for further determination by GC–MS

This work reports the development of a dispersive liquid – liquid microextraction method for the simultaneous extraction, preconcentration, and derivatization of Hg²⁺ and CH₃Hg⁺ species from water samples for further determination by GC – MS. Some parameters of the proposed method, such as volume and type of disperser and extraction solvent, and Na[B(C₆H₅)₄] concentration were investigated using response surface methodology. Suitable recoveries were obtained using 80 μL C₂Cl₄ (as extraction solvent), 1000 μL ethanol (as disperser solvent), and 300 μL 2.1 mmol/L Na[B(C₆H₅)₄] (as derivatizing agent). Accuracy was evaluated in terms of recovery and ranged from 87 to 99% with RSD values <7%. In addition, a certified reference material of water (NIST 1641d) was analyzed and agreed with the certified value about 107% (for Hg²⁺), with RSD values <8.5%. LODs were 0.3 and 0.2 μg/L, with enrichment factors of 112 and 115 for Hg²⁺ and CH₃Hg⁺, respectively. The optimized method was applied for the determination of Hg²⁺ and CH₃Hg⁺ in tap, well, and lake water samples.     

Optimization of a GC‐MS/MS Method for the Analysis of PCDDs and PCDFs in Human and Fish Tissue

This paper outlines the possibilities of selectivity and sensitivity enhancement in measuring PCDD/F congeners using an ion trap GC‐MS/MS. The pressure of the collision gas and the collision energy were optimized. The modified GC‐MS/MS method was applied to the determination of PCDDs and PCDFs in human and fish tissues. Limits of quantification were about 1 pg/g of fat for all seventeen 2378 PCDD/Fs tested (starting amount of fat, 2 g).     

Comparative analysis of essential oils from eight herbal medicines with pungent flavor and cool nature by GC–MS and chemometric resolution methods

Systematic comparative research was conducted on essential oils from eight traditional Chinese medicines (TCM) of pungent flavor and cool nature because the essential oils are the main active ingredients of herbs of this kind. The work was based on their component analysis by gas chromatography–mass spectrometry (GC–MS), on their retention indices, as well as on chemometric resolution methods. A total of 144 compounds were tentatively identified, accounting for 69.0% to 91.8% of the total essential oils. It is worth noting that there are 67 compounds in at least three of these eight essential oils. Moreover, many biologically active compounds, such as hexanal, α‐pinene, camphene, β‐pinene, p‐cymene, limonene, eucalyptol, (Z)‐ocimene, γ‐terpinene, camphor, p‐menthone, 4‐terpineol, α‐terpineol, carvone, eugenol, caryophyllene, β‐farnesene, α‐curcumene, β‐selinene, δ‐cadinene, caryophyllene oxide, cedrol, n‐hexadecanoic acid, benzaldehyde, benzeneacetaldehyde, phthalic acid diisobutyl ester, linoleic acid, tetradecanoic acid, (Z,Z,Z)‐9,12,15‐octadecatrienoic acid, eucalyptol, pentadecanoic acid, hexadecanoic acid methyl ester, linoleic acid methyl ester, exist in at least four of the eight essential oils. These results might help us to understand why the eight herbs are all of pungent flavor and cool nature according to the theory of TCM, and may provide a useful chemical basis for future research on herbs of this kind.