Acid Catalyzed tert‐Butylation and Tritylation of 4‐Nitro‐1,2,3‐triazole: Selective Synthesis of 1‐Methyl‐5‐nitro‐1,2,3‐triazole via 1‐tert‐Butyl‐4‐nitro‐1,2,3‐triazole

4‐Nitro‐1,2,3‐triazole was found to react with tert‐butanol in concentrated sulfuric acid to yield 1‐tert‐butyl‐4‐nitro‐1,2,3‐triazole as the only reaction product, whereas tert‐butylation and tritylation of 4‐nitro‐1,2,3‐triazole in presence of catalytic amount of sulfuric acid in benzene was found to provide mixtures of isomeric 1‐ and 2‐alkyl‐4‐nitro‐1,2,3‐triazoles with predominance of N2‐alkylated products. A new methodology for preparation of 1‐alkyl‐5‐nitro‐1,2,3‐triazoles from 1‐tert‐butyl‐4‐nitro‐1,2,3‐triazole via exhaustive alkylation followed by removal of tert‐butyl group from intermediate triazolium salts was demonstrated by the example of preparation of 1‐methyl‐5‐nitro‐1,2,3‐triazole.     

Silver Salt and Derivatives of 5‐Azido‐1H‐1, 2, 4‐triazole‐3‐­carbonitrile

This study features the preparation of three new energetic C‐azido‐1, 2, 4‐triazoles, with the anion of one being a new binary C–N compound. 5‐Azido‐1H‐1, 2, 4‐triazole‐3‐carbonitrile ( 1 ) was prepared from 5‐amino‐1H‐1, 2, 4‐triazole‐3‐carbonitrile and further derivatized to 5‐azido‐1H‐1, 2, 4‐triazole‐3‐carbohydroximoyl chloride ( 5 ) with 3‐azido‐1H‐1, 2, 4‐triazole‐5‐carboxamidoxime ( 3 ) as an intermediate. The ability of 1 and 3 for salt formation was shown with the respective silver salts 2 and 4 . All compounds were well characterized by various means, including IR and multinuclear NMR spectroscopy, mass spectrometry, and DSC. The molecular structures of 1 , 3 , and 5 in the solid state were determined by single‐crystal X‐ray diffraction. The sensitivities towards various outer stimuli (impact, friction, electrostatic discharge) were determined according to BAM standards. The silver salts were additionally tested for their potential as primary explosives.     

An Efficient Route to Ethyl 5‐Alkyl‐ (Aryl)‐1H‐1,2,4‐triazole‐3‐carboxylates

An efficient general route to the synthesis of 5‐substituted 1H‐1,2,4‐triazole‐3‐carboxylates was developed. N‐acylamidrazones were obtained from carboxylic acid hydrazides and ethyl thiooxamate or ethyl 2‐ethoxy‐2‐iminoacetate hydrochloride and then were reacted with chloroanhydride of the same carboxylic acid. As the next step, diacylamidrazones were cyclized to 5‐substituted 1H‐1,2,4‐triazole‐3‐carboxylates one pot in mild conditions.     

Synthesis and Structure Determination of Some New N‐Glycosides of 4,5‐Disubstituted‐1,2,4‐Triazole‐3‐Thiones

Some new N‐glycosides of 4‐(2‐phenylethyl)‐5‐pyridyl‐1,2,4‐triazole‐3‐thiones were synthesised by the coupling reaction of halo sugar with 4,5‐disubstituted 3H‐1,2,4‐triazole‐3‐thiones in the presence of mercuric cyanide and dry nitromethane as solvent, followed by deprotection using dry ammonia in methanol. All of the above compounds were fully characterized by means of infrared, ¹H NMR spectroscopy, mass spectroscopy and elemental analysis.     

Synthesis and antimycobacterial activity of alkyl 1‐heteroaryl‐1H‐1,2,3‐triazole‐4‐carboxylates

A series of alkyl l‐heteroaryl‐1H‐1,2,3‐triazole‐4‐carboxylates 6a‐u were synthesised in four steps from methyl (Z)‐2‐benzyloxycarbonylarmino‐3‐(dimethylamino)prop‐2‐enoate ( 1 ) and heterocyclic amines 2a‐s. Triazoles 6a‐o were tested against antimycobacterial activity. For the most active compound, n‐pentyl 1‐(6‐phenylpyridazin‐3‐yl)‐1H‐1,2,3‐triazole‐4‐carboxylate ( 6n ), minimum inhibitory concentration 3.13 μg/ml was determined.     

Synthesis and antibacterial activity of some novel N2‐hydroxymethyl and N2‐aminomethyl derivatives of 4‐aryl‐5‐(3‐chlorophenyl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thione

In this investigation, several novel N2‐hydroxymethyl and N2‐aminomethyl derivatives of 5‐(3‐chlorophenyl)‐4‐(4‐methylphenyl)‐2,4‐dihydro‐ 3H‐1,2,4‐triazole‐3‐thione and 4‐(4‐bromophenyl)‐ 5‐(3‐chlorophenyl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐ thione were prepared. All synthesized compounds were screened for their antibacterial activity against six Gram‐positive and four Gram‐negative bacterial strains. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 22:737–743, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20737     

A New pH Indicator Based on 2,5‐Diaryl‐1‐salicylideneamino‐1,3,4‐triazole Derivative

2‐Phenyl‐5‐p‐tolyl‐1‐salicylideneamino‐1,3,4‐triazole (PTST) was studied among 2,5‐diaryl‐1‐salicylidene amino‐1,3,4‐triazole derivatives as a novel potential pH indicator. In terms of absorption intensity coming from the acid‐base reactions, PTST showed strong yellow‐green colour with high extinction coefficient in the pH range 7.0–9.5. In addition, the corresponding colour development at the transition point can be attributed to the resonance structures of PTST, which were caused by the hydrogen ion dissociation from the acidic form of the compound in the presence of alkali. The full geometric optimization and achievement of the electronic structure of the molecule were performed by an AM1 semiempirical method. The triazole compound was compared with phenolphthalein (PT), which is widely used as an acid‐base indicator in titrimetry, for accuracy test.     

Synthesis and Antimicrobial Activity of N‐Aryl‐4‐(cyano/alkoxycarbonyl)‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole Derivatives

A convenient synthesis of a new series of N‐aryl‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole‐4‐carbonitriles and alkyl N‐aryl‐5‐(pyridin‐3‐yl)‐1H/3H‐1,2,3‐triazole‐4‐carboxylic acid esters is reported. The newly synthesized 5‐(pyridin‐3‐yl)‐1,2,3‐triazole derivatives are evaluated for their antibacterial and antifungal activity. Some of these triazole derivatives have exhibited moderate antimicrobial activity.     

New 1,2,3‐triazolo[4,5‐d]1,2,4‐triazolo[3,4‐b]pyridazine derivatives II

New tricyclic 1,2,3‐triazolo‐1,2,4‐triazolo‐pyridazine derivatives, bearing a methyl substituent on the 1,2,3‐triazole ring, were prepared as potential biological agents. N‐Methylation of dimethyl 1,2,3‐triazole‐4,5‐dicarboxylate allowed synthesis of the isomeric 1‐methyl‐4,7‐dihydroxy and 2‐methyl‐4,7‐dihydroxy triazolo‐pyridazines 4a and 4b which, by a chlorination reaction, gave the corresponding 1‐methyl‐4‐chloro‐( 6a ), 1‐methyl‐7‐chloro‐ ( 6b ) and 2‐methyl‐4‐chloro‐ ( 9 ) substituted 1,2,3‐triazolo‐pyridazines. The nucle‐ophilic substitution with hydrazine hydrate and the suitable cyclization to form the 1,2,4‐triazole ring, provided the expected tricyclic isomeric derivatives 8a, 8b and 11 respectively. The p‐methoxybenzyl substituent, introduced as a leaving group to obtain either v‐triazolo‐pyridazine or v‐triazolo‐s‐triazolo‐pyri‐dazine derivatives unsubstituted on the 1,2,3‐triazole ring, appeared inadequate. Some compounds underwent binding assays toward the adenosine A₁and A_2A receptors.     

Synthesis of Some Novel 3,6‐Bis(1,2,3‐triazolyl)‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazole Derivatives

The cyclization of 1‐amino‐2‐mercapto‐5‐[1‐(4‐ethoxyphenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐1,3,4‐triazole which was synthesized from p‐ethoxyaniline with various triazole acid in absolute phosphorus oxychloride yields 3,6‐bis(1,2,3‐triazolyl)‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazole derivatives 9a?j , and their structures are established by MS, IR, CHN and ¹H NMR spectral data.     

4,4′‐Butane‐1,4‐diylbis[3‐ethyl‐1H‐1,2,4‐triazol‐5(4H)‐one] and 4‐hydr­oxy‐3‐n‐prop­yl‐1H‐1,2,4‐triazol‐5(4H)‐one

The title compounds, C₁₂H₂₀N₆O₂, (I), and C₅H₉N₃O₂, (II), display the characteristic features of 1,2,4‐triazole derivatives. Compound (I) lies about an inversion centre which is at the mid‐point of the central C—C bond. Compound (II) also contains a planar 1,2,4‐triazole ring but differs from (I) in that it has a hydr­oxy group attached to the ring. Mol­ecules of (I) are held together in the crystal structure by inter­molecular N—H⋯O contacts and by weak π–π stacking inter­actions between the 1,2,4‐triazole moieties. Compound (II) contains inter­molecular O—H⋯O and N—H⋯O hydrogen bonds.     

Tunable Self‐Assembly of Triazole‐Linked Porphyrin–Polymer Conjugates

The convergence of supramolecular chemistry and polymer science offers many powerful approaches for building functional nanostructures with well‐defined dynamic behaviour. Herein we report the efficient “click” synthesis and self‐assembly of AB₂‐ and AB₄‐type multitopic porphyrin–polymer conjugates (PPCs). PPCs were prepared using the copper(I)‐catalysed azide–alkyne cycloaddition (CuAAC) reaction, and consisted of linear polystyrene, poly(butyl acrylate), or poly(tert‐butyl acrylate) arms attached to a zinc(II) porphyrin core via triazole linkages. We exploit the presence of the triazole groups obtained from CuAAC coupling to direct the self‐assembly of the PPCs into short oligomers (2–6 units in length) via intermolecular porphyrinatozinc–triazole coordination. By altering the length and grafting density of the polymer arms, we demonstrate that the association constant of the porphyrinatozinc–triazole complex can be systematically tuned over two orders of magnitude. Self‐assembly of the PPCs also resulted in a 6 K increase in the glass transition temperature of the bulk material compared to a non‐assembling PPC. The modular synthesis and tunable self‐assembly of the triazole‐linked PPCs thus represents a powerful supramolecular platform for building functional nanostructured materials.     

New polyelectrolytes based on 4‐vinyl‐1,2,3‐triazole and 1‐vinylimidazole

Copolymers of 4‐vinyl‐1,2,3‐triazole and 1‐vinylimidazole (VI) were obtained by radical copolymerization of (4‐vinyl‐1H‐1,2,3‐triazol‐1‐yl)methyl pivalate with VI followed by alkali hydrolysis. Reactivity ratios of the triazole and imidazole monomers are 0.51 and 0.30, respectively. Theoretical quantum‐chemical calculations by the PM3 semiempirical method give close values, which show that the obtained reactivity ratios reflect the activity of the vinyl groups. Polyelectrolyte properties of the copolymers were studied by potentiometric titration. Hydrogen bonds between the protonated triazole cycle and the triazole or imidazole units were found to considerably influence the solubility and solution properties of the copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Syntheses,Structures, and Electrochemical Properties of Two Bis‐triazole‐bis‐amide‐based Copper(II) Pyridine‐2,3‐dicarboxylate Coordination Polymers

Abstract. Two bis‐triazole‐bis‐amide‐based copper(II) pyridine‐2,3‐dicarboxylate coordination polymers (CPs), [Cu(2,3‐pydc)(dtb)_0.5(DMF)] · 2H₂O ( 1 ) and [Cu(2,3‐pydc)(dth)_0.5(DMF)] · 2H₂O ( 2 ) (2,3‐H₂pydc = pyridine‐2,3‐dicarboxylic acid, dtb = N,N′‐bis(4H‐1,2,4‐triazole)butanamide, and dth = N,N′‐bis(4H‐1,2,4‐triazole)hexanamide), were synthesized under solvothermal conditions. CPs 1 and 2 show similar two‐dimensional (2D) structures. In 1 , the 2,3‐pydc anions bridge the Cu^II ions into a one‐dimensional (1D) chain. Such 1D chains are linked by the dtb ligands to form a 2D layer. The adjacent 2D layers are extended into a three‐dimensional (3D) supramolecular architecture by hydrogen‐bonding interactions. The electrochemical properties of 1 and 2 were investigated.     

Combining the Advantages of Tetrazoles and 1,2,3‐Triazoles: 4,5‐Bis(tetrazol‐5‐yl)‐1,2,3‐triazole, 4,5‐Bis(1‐hydroxytetrazol‐5‐yl)‐1,2,3‐triazole,and their Energetic Derivatives

In the development of new energetic materials, the main challenge is the combination of high energy content with chemical and mechanical stability, two properties that are often contradictory. In this study, the syntheses and comprehensive characterizations of 4,5‐bis(tetrazole‐5‐yl)‐1,2,3‐triazole and the novel 4,5‐bis(1‐hydroxytetrazole‐5‐yl)‐1,2,3‐triazole, as well as their energetic properties, are presented, combining the advantages of the more energetic tetrazole and the more stable 1,2,3‐triazole rings. Nitrogen‐rich salts of both compounds were synthesized to investigate their detonation performances and combustion behavior calculated by computer codes for potential application in erosion‐reduced gun propellant mixtures due to their high nitrogen content. The structures of several of the compounds were studied by single‐crystal X‐ray diffraction and, especially in the case of 4,5‐bis(tetrazol‐5‐yl)‐1,2,3‐triazole, revealed the site of deprotonation.     

Synthesis and characterization of new electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives

New electroluminescent materials of 1,3,4‐oxadiazole–1,2,3‐triazole and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine hybrid derivatives were synthesized and characterized. Following spectroscopic studies and characterization of their electronic properties, 1,3,4‐oxadiazole–1,2,3‐triazole hybrids and 1,3,4‐oxadiazole–1,2,3‐triazole–pyridine derivatives were found to be potentially efficient blue electroluminescent materials. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:322–328, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20210     

Mercury(II) Chloride‐Mediated Desulphurization of Amidinothioureas: Synthesis and Antimicrobial Activity of 3‐Amino‐1,2,4‐triazole Derivatives

The synthesis of 3‐amino‐1,2,4‐triazole via mercury(II) chloride‐mediated cyclization of amidinothiourea is described. This procedure offers a general and efficient route to synthesize the title compound by 3 + 2 annulation reaction. On the basis of the literature precedence, the mechanism for the formation of 3‐amino‐1,2,4‐triazole is proposed. When the synthesized compounds were tested for their antimicrobial activity showed promising inhibition against tested microbes.     

C—H⃛O and C—H⃛π interactions in 1‐acetyl‐4‐(p‐chloro­benzyl­idene­amino)‐3‐ethyl‐4,5‐di­hydro‐1H‐1,2,4‐triazol‐5‐one

The title compound, C₁₃H₁₃ClN₄O₂, contains both a phenyl and a triazole ring, both of which are approximately coplanar with the entire mol­ecule. The triazole ring has substituents at the 1‐, 2‐ and 4‐positions. Intramolecular C—H⃛O and C—H⃛N interactions, together with intermolecular C—H⃛O and C—H⃛π interactions, help to stabilize the structure.     

A kinetic study of the thermolysis of N‐crotyl substituted 1,2,4‐triazoles

A kinetic study of the thermolysis of 4‐crotyl‐3,5‐diphenyl‐4H‐1,2,4‐triazole ( 1 ) in a melt of the neat compound was performed at temperatures in the range of 260–350 °C. The main products formed were 1‐crotyl‐3,5‐diphenyl‐1H‐1,2,4‐triazole (3) and 1‐(1‐methylallyl)‐3,5‐diphenyl‐1H‐1,2,4‐triazole ( 4 ) together with 3‐methyl‐2,6‐diphenylpyridine ( 2 ) and 3,5‐diphenyl‐1,2,4‐triazole ( 5 ). Products 2 and 5 were both formed preferentially from 3 and 4 . In the melt was observed first order kinetics. Activation parameters for formation of 3 and 4 were determined. Product 3 : E_a = 95 kJ/mole. Product 4 : E_a= 145 kJ/mole.     

4‐(Pyrrol‐1‐yl)‐1,2,4‐triazole

The asymmetric unit of the title compound, C₆H₆N₄, comprises one and a half molecules with a C₂ axis through the second molecule. Each molecule consists of two planar five‐membered rings connected by a triazole–pyrrole N—N bond with the triazole ring close to being at right angles to the pyrrole ring. The molecules are linked by C—H...N hydrogen bonds and weaker offset face‐to‐face π–π interactions.