Co‐electroosmotic capillary electrophoresis of basic proteins with 1‐alkyl‐3‐methylimidazolium tetrafluoroborate ionic liquids as non‐covalent coating agents of the fused‐silica capillary and additives of the electrolyte solution

The paper reports the results of a study carried out to evaluate the use of three 1‐alkyl‐3‐methylimidazolium‐based ionic liquids as non‐covalent coating agents for bare fused‐silica capillaries and additives of the electrolyte solutions (BGE) for CE of basic proteins in the co‐EOF separation mode. The three ionic liquids are differentiated from each other by the length of the alkyl group on the imidazolium cation, consisting of either an ethyl, butyl or octyl substituent, whereas tetrafluoroborate is the common anionic component of the ionic liquids. Coating the capillary with the ionic liquid resulted in improved peak shape and protein separation, while the EOF was maintained cathodic. This indicates that each ionic liquid is effective at masking the protein interaction sites on the inner surface of the capillary, also when its adsorption onto the capillary wall has not completely neutralized all the negative charges arising from the ionization of the silanol groups and the ionic liquid is not incorporated into the BGE employed for separation. Using the coated capillaries with BGE containing the ionic liquid employed for the coating, at concentration low enough to maintaining the EOF cathodic, both peak shape and protein separation varied to different extents, based on the particular ionic liquid used and its concentration. Fast and efficient separation of the model basic protein mixture in co‐electroosmotic CE is obtained with the 1‐butyl‐3‐methylimidazolium tetrafluoroborate coated capillary and 100 mM acetate buffer (pH 4.0) containing 4.4 mM 1‐butyl‐3‐methylimidazolium tetrafluoroborate as the BGE.     

Effect of Ionic Liquid Structure on the Electrochemical Response of Dopamine at Room Temperature Ionic Liquid‐modified Carbon Paste Electrodes (IL–CPE)

In this work 12 different ionic liquids (ILs) have been used added as co‐binders in the preparation of modified carbon paste electrodes (IL–CPEs) used for the voltammetric analysis of dopamine in Britton‐Robinson buffer. The ionic liquids studied were selected based on three main criteria: (1) increasing chain length of alkyl substituents (studying 1‐ethylimidazolium and ethyl, propyl, butyl, hexyl and decylmethylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids); (2) nature of the counter ion (dicyanamide, bis(trifluoromethylsulfonyl)imide and hexafluorophosphate) in 1‐butyl‐3‐methylimidazolium ionic liquids; and (3) cation ring structures (1‐butyl‐3‐methylimidazolium, 1‐butyl‐1‐methylpiperidinium, 1‐butyl‐1‐methylpyrrolidinium and 1‐butyl‐3‐methylpyridinium) in bis(trifluoromethylsulfonyl)imide or hexafluorophosphate (1‐butyl‐3‐methylimidazolium or 1‐butyl‐3‐methylpyridinium as cations) ionic liquids. The use of IL as co‐binders in IL–CPE results in a general enhancement of both the sensitivity and the reversibility of dopamine oxidation. In square wave voltammetry experiments, the peak current increased up to a 400 % when 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide was used as co‐binder, as compared to the response found with the unmodified CPE. Experimental data provide evidence that electrostatic and steric effects are the most important ones vis‐à‐vis these electrocatalytic effects on the anodic oxidation of dopamine on IL–CPE. The relative hydrophilicity of dicyanamide anions reduced the electrocatalytic effects of the corresponding ionic liquids, while the use of 1‐ethyl‐3‐methylimidazolium hexafluorophosphate or 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (two relatively small and highly hydrophobic ionic liquids) as co‐binders in IL–CPE resulted in the highest electrocatalytic activity among all of the IL–CPE studied.     

Gas Phase Conversion of Carbon Tetrachloride to Alkyl Chlorides Catalyzed by Supported Ionic Liquids

An efficient way of converting carbon tetrachloride (CTC) to alkyl chlorides is reported, which uses the catalysts of ionic liquids supported on granular active carbon. The catalytic performance was evaluated in a temperature range of 120–200°C and atmospheric pressure for different ionic liquids, namely 1‐butyl‐3‐methylimidazolium chloride, 1‐octyl‐3‐methylimidazolium chloride, hydrochloric salts of N‐methylimidazole (MIm), pyridine and triethylamine, as well as bisulfate and dihydric phosphate of N‐methylimidazole. On this basis, the reaction mechanism was proposed, and the influences of the reaction temperature and the attributes of ionic liquids were discussed. The overall reaction was assumed to be comprised of two steps, the hydrolysis of CTC and reaction of HCl with alcohols under acidic catalyst. The results indicate that the conversion of CTC increased monotonically with temperature and even approached 100% at 200°C, while the maximum selectivity to alkyl chlorides was obtained around 160°C. This reaction might be potentially applicable to the resource utilization of superfluous byproduct of CTC in the chloromethane industry.     

Self‐Assembly of Imidazolium‐Based Surfactants in Magnetic Room‐Temperature Ionic Liquids: Binary Mixtures

The phase behaviour of binary mixtures of ionic surfactants (1‐alkyl‐3‐imidazolium chloride, C_nmimCl with n=14, 16 and 18) and imidazolium‐based ionic liquids (1‐alkyl‐3‐methylimidazolium tetrachloroferrate, C_nmimFeCl₄, with n=2 and 4) over a broad temperature range and the complete range of compositions is described. By using many complementary methods including differential scanning calorimetry (DSC), polarised microscopy, small‐angle neutron and X‐ray scattering (SANS/SAXS), and surface tension, the ability of this model system to support self‐assembly is described quantitatively and this behaviour is compared with common water systems. The existence of micelles swollen by the solvent can be deduced from SANS experiments and represent a possible model for aggregates, which has barely been considered for ionic‐liquid systems until now, and can be ascribed to the rather low solvophobicity of the surfactants. Our investigation shows that, in general, C_nmimCl is a rather weak amphiphile in these ionic liquids. The amphiphilic strength increases systematically with the length of the alkyl chain, as seen from the phase behaviour, the critical micelle concentration, and also the level of definition of the aggregates formed.     

Ionic liquid‐based dispersive liquid–liquid microextraction followed by RP‐HPLC determination of saquinavir in rat serum: application to pharmacokinetics

An ionic liquid‐based dispersive liquid–liquid microextraction followed by RP‐HPLC determination of the most commonly prescribed protease inhibitor, saquinavir, in rat plasma was developed and validated. The effects of different ionic liquids, dispersive solvents, extractant/disperser ratio and salt concentration on sample recovery and enrichment were studied. Among the ionic liquids investigated, 1‐butyl‐3‐methylimidazolium hexafluorophosphate was found to be most effective for extraction of saquinavir from rat serum. The recovery was found to be 95% at an extractant/disperser ratio of 0.43 using 1‐butyl‐3‐methylimidazolium hexafluorophosphate and methanol as extraction and dispersive solvents. The recovery was further enhanced to 99.5% by addition of 5.0% NaCl. A threefold enhancement in detection and quantification limits was achieved, at 0.01 and 0.03 µg/mL, compared with the conventional protein precipitation method. A linear relationship was observed in the range of 0.035–10.0 µg/mL with a correlation coefficient (r²) of 0.9996. The method was validated and applied to study pharmacokinetics of saquinavir in rat serum. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of triazine herbicides in juice samples by microwave‐assisted ionic liquid/ionic liquid dispersive liquid–liquid microextraction coupled with high‐performance liquid chromatography

A novel microextraction method, termed microwave‐assisted ionic liquid/ionic liquid dispersive liquid–liquid microextraction, has been developed for the rapid enrichment and analysis of triazine herbicides in fruit juice samples by high‐performance liquid chromatography. Instead of using hazardous organic solvents, two kinds of ionic liquids, a hydrophobic ionic liquid (1‐hexyl‐3‐methylimidazolium hexafluorophosphate) and a hydrophilic ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate), were used as the extraction solvent and dispersion agent, respectively, in this method. The extraction procedure was induced by the formation of cloudy solution, which was composed of fine drops of 1‐hexyl‐3‐methylimidazolium hexafluorophosphate dispersed entirely into sample solution with the help of 1‐butyl‐3‐methylimidazolium tetrafluoroborate. In addition, an ion‐pairing agent (NH₄PF₆) was introduced to improve recoveries of the ionic liquid phase. Several experimental parameters that might affect the extraction efficiency were investigated. Under the optimum experimental conditions, the linearity for determining the analytes was in the range of 5.00–250.00 μg/L, with the correlation coefficients of 0.9982–0.9997. The practical application of this effective and green method is demonstrated by the successful analysis of triazine herbicides in four juice samples, with satisfactory recoveries (76.7–105.7%) and relative standard deviations (lower than 6.6%). In general, this method is fast, effective, and robust to determine triazine herbicides in juice samples.     

Synthesis and Characterisation of Fluorescent Carbon Nanodots Produced in Ionic Liquids by Laser Ablation

Carbon nanodots (C‐dots) with an average size of 1.5 and 3.0 nm were produced by laser ablation in different imidazolium ionic liquids (ILs), namely, 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate (BMI.BF₄), 1‐n‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf₂) and 1‐n‐octyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (OMI.NTf₂). The mean size of the nanoparticles is influenced by the imidazolium alkyl side chain but not by the nature of the anion. However, by varying the anion (BF₄ vs. NTf₂) it was possible to detect a significant modification of the fluorescence properties. The C‐dots are much probably stabilised by an electrostatic layer of the IL and this interaction has played an important role with regard to the formation, stabilisation and photoluminescence properties of the nanodots. A tuneable broadband fluorescence emission from the colloidal suspension was observed under ultraviolet/visible excitation with fluorescence lifetimes fitted by a multi‐exponential decay with average values around 7 ns.     

Borohydride Ionic Liquids as Hypergolic Fuels: A Quest for Improved Stability

Hydrazine and its derivatives are used as fuels in rocket propellant systems; however, due to high vapor pressure, toxicity, and carcinogenicity, handling of such compounds is extremely hazardous. Hypergolic ionic liquids have shown great promise to become viable replacements for hydrazines as fuels. Borohydride‐containing ionic liquids have now been synthesized using a more efficient synthetic pathway that does not require liquid ammonia and halide precursors. Among the eight new compounds, 1‐allyl‐3‐n‐butyl‐imidazolium borohydride ( 1 ) and 1, 3‐diallylimidazolium borohydride ( 5 ) exhibit very short ignition‐delay times (ID) of 8 and 3 ms, respectively. The hydrolytic stability of borohydride compounds has been greatly improved by attaching long‐chain alkyl substituents to the imidazole ring. 1,3‐Di‐(n‐octyl)‐imidazolium borohydride ( 3 ) is a water stable borohydride‐containing ionic liquid. 1,3‐Di‐(n‐butyl)‐imidazolium borohydride ( 2 ) is a unique example of a borohydride liquid crystal. These ionic liquids have some unusual advantages, including negligible vapor pressures, good ignition delay (ID) times, and reduced synthetic and storage costs, thereby showing good application potential as environmentally friendly fuels in bipropellant formulations. In addition, they also have potential applications in the form of reducing agents and hydrogen storage materials.     

Nitrite Ionic Liquids (IL‐ONO and [bmim]NO2) as Effective Nitrosonium Sources for the Synthesis of α‐Oximinoketones under Mild Heterogeneous Conditions

Ketones and β‐diketones were nitrosated and converted to their corresponding α‐oximinoketones using task‐specific ionic liquids, 1‐(4‐nitritobutyl)‐3‐methylimidazolium chloride, IL‐ONO, and 1‐butyl‐3‐methylimidazolium nitrite at room temperature. The results from two ionic liquids are comparable and showed that these IL's are effective nitrosonium sources for the preparation of oximinoketones. The protocol is rapid, the yields are excellent, and the method is simple.     

Investigation of ionic liquids under Bi‐ion and Bi‐cluster ions bombardment by ToF‐SIMS

A systematic study of five different imidazolium‐based room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium acetate, 1‐butyl‐3‐methylimidazolium nitrate, 1‐butyl‐3‐methylimidazolium iodide, 1‐butyl‐3‐methylimidazolium hexafluorophosphate and 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide were carried out by means of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) in positive and negative ion mode. The compounds were measured under Bi‐ion and Bi‐cluster ions (Bi_2–7⁺, Bi_{3, 5}²⁺) bombardment, and spectral information and general rules for the fragmentation pattern are presented. Evidence for hydrogen bonding, due to high molecular secondary cluster ions, could be found. Hydrogen bonding strength could be estimated by ToF‐SIMS via correlation of the anionic yield enhancement with solvent parameters. Copyright © 2010 John Wiley & Sons, Ltd.     

1‐Octanol/Water Partition Coefficients of 1Alkyl‐3‐methylimidazolium Chloride

The solubilities of 1alkyl‐3‐methylimidazolium chloride, [C_nmim][Cl], where n=4, 8, 10, and 12, in 1octanol and water have been measured by a dynamic method in the temperature range from 270 to 370 K. The solubility data was used to calculate the 1octanol/water partition coefficients as a function of temperature and alkyl substituent. The melting point, enthalpies of fusion, and enthalpies of solid–solid phase transitions were determined by differential scanning calorimetry, DSC. The solubility of [C_nmim][Cl], where n=10 or 12 in 1octanol is comparable and higher than that of [C₄mim][Cl] in 1octanol. Liquid 1n‐octyl‐3‐methylimidazolium chloride, [C₈mim][Cl], is not miscible with 1octanol and water, consequently, the liquid–liquid equilibrium, LLE was measured in this system. The differences between the solubilities in water for n=4 and 12 are shown only in α₁ and γ₁ solid crystalline phases. Additionally, the immiscibility region was observed for the higher concentration of [C₁₀mim][Cl] in water. The intermolecular solute–solvent interaction of 1butyl‐3‐methylimidazolium chloride with water is higher than for other 1alkyl‐3‐methylimidazolium chlorides. The data was correlated by means of the UNIQUAC ASM and two modified NRTL equations utilizing parameters derived from the solid–liquid equilibrium, SLE. The root‐mean‐square deviations of the solubility temperatures for all calculated data are from 1.8 to 7 K and depend on the particular equation used. In the calculations, the existence of two solid–solid first‐order phase transitions in [C₁₂mim][Cl] has also been taken into consideration. Experimental partition coefficients (log P) are negative at three temperatures; this is evidence for the possible use of these ionic liquids as green solvents.     

Usefulness of the chaotropic effect in sample preparation for chromatographic analysis of acidic xenobiotics in human plasma

In this study a new RP‐HPLC with photo‐diode array detection method for the determination of ibuprofen ((RS)‐2‐(4‐isobutylphenyl)propionic acid) in human plasma samples was developed. Samples were prepared by SPE and analyzed by an isocratic elution mode over a C₁₈ column using 80% methanol. A novel sample pretreatment method, based on the addition of ionic liquids possessing chaotropic ions to small human plasma sample (100 μL), was elaborated. 1‐Butyl‐3‐methylimidazolium chloride and 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIM BF₄) were tested from the point of view of extraction yield. Quantification was based on calibration curve applying diclofenac as the internal standard. Owing to dilution of plasma sample by 2 mM aqueous solution of BMIM BF₄ before SPE, appropriate sample purification and extraction yields higher than 95% with precision lower than 2% can be achieved. Linear coefficients of correlation (r²) were >0.99 in the range of 0.3–5 μg/mL ibuprofen concentration in plasma. The limit of quantification was 65 ng/mL and the detection limit for ibuprofen was 19.5 ng/mL.     

Efficient separation of tocopherol homologues in vegetable oil by ionic‐liquid‐based countercurrent chromatography using a non‐aqueous biphasic system

Tocopherol homologues are important fat‐soluble bioactive compounds with high nutritional value. However, it is of great challenge to separate these homologues because of their high structural similarities. In this work, ionic‐liquid‐based countercurrent chromatography was used for the separation and purification of tocopherol homologues. Conventional countercurrent chromatography and ionic‐liquid‐based countercurrent chromatography solvent systems were evaluated in respect of partition coefficient, separation factor, and stationary phase retention factor to separate these targets. Kind of ionic liquids, amount of ionic liquid, and sample amount were systematically optimized. A novel countercurrent chromatography non‐aqueous biphasic system composed of n‐hexane‐methanol‐1‐butyl‐3‐methylimidazolium chloride was established. The baseline separation of tocopherol mixtures was obtained in one cycle process. The ionic liquid played a key role in the countercurrent chromatography separation, which resulted in difference of partition behavior of individual tocopherol in the whole system through different hydrogen‐bonding affinity. Finally, n‐hexane‐methanol‐1‐butyl‐3‐methylimidazolium chloride (5:5:3, v/v) water‐free biphasic system was successfully applied to separate tocopherol homologues from vegetable oil that was not achieved beforehand. This method can be widely employed to separate many similar molecules such as tocotrienols, tocomonoenols, and marine‐derived tocopherol in food samples.     

Recombination of Lophyl Radicals in Pyrrolidinium‐Based Ionic Liquids

The recombination of photolytically generated lophyl radicals has been investigated by UV/Vis spectroscopy in 1‐alkyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imides (NTf₂) in comparison with 1‐butyl‐3‐methylimidazolium NTf₂, dimethyl sulfoxide, and triacetin. The 1‐alkyl‐1‐methylpyrrolidinium‐based ionic liquids contain an alkyl substituent varying between butyl and decyl groups. Optically pure ionic liquids are used in these studies. Temperature‐dependent investigation of lophyl radical recombination shows an increase in the radical recombination rate with increasing temperature in each solvent, which is caused by decreasing viscosity with increasing temperature. Furthermore, the viscosity of the 1‐alkyl‐1‐methylpyrrolidinium NTf₂ increases nearly linearly within the row of these ionic liquids. In contrast, the recombination of the photolytically generated lophyl radicals is significantly faster in the ionic liquids than in the traditional organic solvents under investigation. Moreover, the recombination rate increases with the length of the alkyl chain bound at the cation of the ionic liquid at a given temperature. This may be caused by an increase in the extent of lophyl radical recombination within the solvent cage. Solvent cage effects dominate in the case of lophyl radical recombination in ionic liquids bearing a long alkyl chain or if the temperature is near the melting temperature of the ionic liquid. The positive value of the activation entropy supports this hypothesis. The results obtained are important for discussion of bimolecular radical reactions in ionic liquids.     

Simultaneous determination of three alkaloids in Huangbo using an ionic liquid as a mobile phase additive in reversed‐phase liquid chromatography

A reversed‐phase high‐performance liquid chromatography method for the simultaneous determination of jatrorrhizine, palmatine, and berberine in Huangbo, the dried bark of Chinese Corktree, was established by using 1‐hexyl‐3‐methylimidazolium tertafluoroborate as a mobile phase additive. The chromatographic behavior of the three compounds on the C₁₈ column was studied with four different types of 1‐alkyl‐3‐methylimidazolium‐based ionic liquids as the mobile phase additives. The effect of 1‐hexyl‐3‐methylimidazolium tertafluoroborate was the best in the four investigated ionic liquids. The concentration of 1‐hexyl‐3‐methylimidazolium tertafluoroborate and the pH of the mobile phase, which influenced the chromatographic behaviors of the three bioactive compounds, were investigated. The linearity, precision, accuracy, repeatability, limit of detection, and quantification of the proposed method were found to be satisfactory. To explain the role of ionic liquids as the mobile phase additives, the possible mechanism was also explored and discussed.     

In situ ionic liquid dispersive liquid–liquid microextraction combined with ultra high performance liquid chromatography for determination of neonicotinoid insecticides in honey samples

An efficient in situ ionic liquid dispersive liquid–liquid microextraction followed by ultra‐performance liquid chromatography was developed to determine four neonicotinoid insecticides in wild and commercial honey samples. In this method, a hydrophobic ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate, formed by in situ reaction between potassium hexafluorophosphate and 1‐butyl‐3‐methylimidazolium bromide in sample solution, was used as the extraction solvent. In comparison with the traditional dispersive liquid–liquid microextraction method, the developed method required no dispersive solvent. To achieve high extraction efficiency and enrichment factor, the effects of various experimental parameters were studied in detail. Under the optimized conditions, the limits of detection and quantification were in the ranges of 0.30–0.62 and 1.20–2.50 μg/L, respectively. The method showed high enrichment factors (74–115) with the recoveries between 81.0 and 103.4%. The proposed method was finally applied to different wild and commercial honey samples.     

Deoximation Reaction in Room Temperature Ionic Liquids under Mild Conditions

Deoximation in metal chloride ionic liquids based on 1‐alkyl‐3‐methylimidazolium and triethylene ammonium cations, such as AmimBr(Cl)‐MCl_x(A=ethyl, butyl, benzyl; M=Al, Fe, Cu, Sn and Zn; x=2, 3) and Et₃NHCl‐FeCl₃ were investigated under mild conditions. Ferrate chloride ionic liquid was proved to be an effective catalyst for deoximation of cyclohexanone oxime, exhibiting high conversion of oximes and selectivity to cyclohexanone. Good performance for the deoximation of other oximes such as salicylald oxime, acetone oxime, benzophenone oxime, 4‐nitrobenzald oxime, acetophenone oxime, 2‐chlorobenzaldehyde oxime, Acetald oxime, 2‐butanone oxime and (1R)‐camphor oxime was also achieved with bmimBr‐FeCl₃ as catalyst and solvent. The deoximation was determined to carry out via acid‐catalytic hydrolysis and the reaction mechanism was proposed.     

Ionic liquids as mobile phase additives for determination of thiocyanate and iodide by liquid chromatography

An analytical method was developed for the simultaneous determination of thiocyanate and iodide by reversed‐phase liquid chromatography with UV detection using imidazolium ionic liquids as mobile phase additives. The chromatographic behaviors of the two anions on a C₁₈ column were studied and compared with four types of reagents including imidazolium ionic liquids, pyridinium ionic liquids, 4‐aminophenol hydrochloride and tetrabutylammonium as mobile phase additives. The effects of the concentrations of imidazolium ionic liquids, organic solvents and detection wavelength on separation and detection of the anions were investigated. The role of ionic liquids, retention rules and mechanisms were discussed. The separation of the anions was performed on the C₁₈ reserved‐phase column using acetonitrile‐0.3 mmol/L 1‐amyl‐3‐methylimidazolium tetrafluoroborate (10:90, v/v) as mobile phase, with column temperature of 35°C, flow rate of 1 mL/min and detection wavelength of 210 nm. Under these conditions, the two anions can be completely separated within 6 min. The limits of detection were 0.05 mg/L. The method was applied for the determination of thiocyanate and iodide in ionic liquid samples and iodide drugs, and the spiked recoveries ranged from 97 to 101%. The method is simple, accurate and meets the requirements of quantitative analysis for thiocyanate and iodide.     

Application of Some Room Temperature Ionic Liquids in the Development of Biosensors at Carbon Film Electrodes

Two room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium bistriflimide and 1‐butyl‐3‐methylimidazolium nitrate, were employed for enzyme immobilization in a new sol‐gel matrix and, for the first time, were successfully applied as electrolyte carriers in a biosensing system. The new sol‐gel matrix, based on 3‐aminopropyltrimethoxysilane and 1‐butyl‐3‐methylimidazolium bistriflimide mixtures, did not crack even after several weeks when kept dry, and exhibited similar analytical properties to aqueous sol‐gel based glucose biosensors. The linear range was up to 1.1 mM of glucose, sensitivity was 62 nA mM^?1 and the limit of detection was 28.8 μM. The optimum ionic liquid electrolyte carrier was found to be 1‐butyl‐3‐methylimidazolium nitrate, where the biosensor was made by electrodeposition of the redox mediator, poly(neutral red), and the enzyme was immobilized by cross‐linking with glutaraldehyde. The results showed that application of room temperature ionic liquids to biosensors is very promising and can be further exploited.     

Atom transfer radical polymerization of styrenic ionic liquid monomers and carbon dioxide absorption of the polymerized ionic liquids

Polymeric forms of ionic liquids have many potential applications because of their high thermal stability and ionic nature. Two ionic liquid monomers, 1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate (VBIT) and 1‐(4‐vinylbenzyl)‐3‐ butyl imidazolium hexafluorophosphate (VBIH), were synthesized through the quaternization of N‐butylimidazole with 4‐vinylbenzylchloride and a subsequent anion‐ exchange reaction with sodium tetrafluoroborate or potassium hexafluorophosphate. Copper‐mediated atom transfer radical polymerization was used to polymerize VBIT and VBIH. The effects of various initiator/catalyst systems, monomer concentrations, solvent polarities, and reaction temperatures on the polymerization were examined. The polymerization was well controlled and exhibited living characteristics when CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine or CuBr/2,2′‐bipyridine was used as the catalyst and ethyl 2‐bromoisobutyrate was used as the initiator. Characterizations by thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction showed that the resulting VBIT polymer, poly[1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate] (PVBIT), was amorphous and had excellent thermal stability, with a glass‐transition temperature of 84 °C. The polymerized ionic liquids could absorb CO₂ as ionic liquids: PVBIT absorbed 0.30% (w/w) CO₂ at room temperature and 0.78 atm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1432–1443, 2005