Synthesis and Characterization of New 3‐(3‐Hydroxyphenyl)‐4‐ alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione Compounds

A series of 3‐(3‐hydroxyphenyl)‐4‐alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione compounds with general formula C_nH_2n+1CNO(CO)₂C₆H₄(C₆H₄OH) in which n are even parity numbers from 2 to 18. The structure determinations on these compounds were performed by FT‐IR spectroscopy which indicated that the terminal alkyl chain attached to the oxazepine ring was fully extended. Conformational analysis in DMSO at ambient temperature was carried out for the first time via high resolution ¹H NMR and ¹³C NMR spectroscopy.     

Matrix solid‐phase dispersion with chitosan‐zinc oxide nanoparticles combined with flotation‐assisted dispersive liquid–liquid microextraction for the determination of 13 n‐alkanes in soil samples

In this study, chitosan‐zinc oxide nanoparticles were used as a sorbent of miniaturized matrix solid‐phase dispersion combined with flotation‐assisted dispersive liquid–liquid microextraction for the simultaneous determination of 13 n‐alkanes such as C₈H₁₈ and C₂₀H₄₂ in soil samples. The solid samples were directly blended with the chitosan nanoparticles in the solid‐phase dispersion method. The eluent of solid‐phase dispersion was applied as the dispersive solvent for the following flotation‐assisted dispersive liquid–liquid microextraction for further purification and enrichment of the target compounds prior to gas chromatography with flame ionization detection. Under the optimum conditions, good linearity with correlation coefficients in the range 0.9991 < r² < 0.9995 and low detection limits between 0.08 to 2.5 ng/g were achieved. The presented procedure combined the advantages of chitosan‐zinc oxide nanoparticles, solid‐phase dispersion and flotation‐assisted dispersive liquid–liquid microextraction, and could be applied for the determination of n‐alkanes in complicated soil samples with acceptable recoveries.     

On the Gas‐Phase Reactivity of Complexed OH+ with Halogenated Alkanes

OH⁺ is an extraordinarily strong oxidant. Complexed forms (L? OH⁺), such as H₂OOH⁺, H₃NOH⁺, or iron–porphyrin‐OH⁺ are the anticipated oxidants in many chemical reactions. While these molecules are typically not stable in solution, their isolation can be achieved in the gas phase. We report a systematic survey of the influence on L on the reactivity of L? OH⁺ towards alkanes and halogenated alkanes, showing the tremendous influence of L on the reactivity of L? OH⁺. With the help of with quantum chemical calculations, detailed mechanistic insights on these very general reactions are gained. The gas‐phase pseudo‐first‐order reaction rates of H₂OOH⁺, H₃NOH⁺, and protonated 4‐picoline‐N‐oxide towards isobutane and different halogenated alkanes C_nH_2n+1Cl (n=1–4), HCF₃, CF₄, and CF₂Cl₂ have been determined by means of Fourier transform ion cyclotron resonance meaurements. Reaction rates for H₂OOH⁺ are generally fast (7.2×10^?10–3.0×10^?9 cm³ mol^?1 s^?1) and only in the cases HCF₃ and CF₄ no reactivity is observed. In contrast to this H₃NOH⁺ only reacts with tC₄H₉Cl (k_obs=9.2×10^?10), while 4‐CH₃‐C₅H₄N‐OH⁺ is completely unreactive. While H₂OOH⁺ oxidizes alkanes by an initial hydride abstraction upon formation of a carbocation, it reacts with halogenated alkanes at the chlorine atom. Two mechanistic scenarios, namely oxidation at the halogen atom or proton transfer are found. Accurate proton affinities for HOOH, NH₂OH, a series of alkanes C_nH_2n+2 (n=1–4), and halogenated alkanes C_nH_2n+1Cl (n=1–4), HCF₃, CF₄, and CF₂Cl₂, were calculated by using the G3 method and are in excellent agreement with experimental values, where available. The G3 enthalpies of reaction are also consistent with the observed products. The tendency for oxidation of alkanes by hydride abstraction is expressed in terms of G3 hydride affinities of the corresponding cationic products C_nH_2n+1⁺ (n=1–4) and C_nH_2nCl⁺ (n=1–4). The hypersurface for the reaction of H₂OOH⁺ with CH₃Cl and C₂H₅Cl was calculated at the B3 LYP, MP2, and G3_m* level, underlining the three mechanistic scenarios in which the reaction is either induced by oxidation at the hydrogen or the halogen atom, or by proton transfer.     

Mechanistic Studies on the Gas‐Phase Dehydrogenation of Alkanes at Cyclometalated Platinum Complexes

In the ion/molecule reactions of the cyclometalated platinum complexes [Pt(L? H)]⁺ (L=2,2′‐bipyridine (bipy), 2‐phenylpyridine (phpy), and 7,8‐benzoquinoline (bq)) with linear and branched alkanes C_nH_2n+2 (n=2–4), the main reaction channels correspond to the eliminations of dihydrogen and the respective alkenes in varying ratios. For all three couples [Pt(L? H)]⁺/C₂H₆, loss of C₂H₄ dominates clearly over H₂ elimination; however, the mechanisms significantly differs for the reactions of the “rollover”‐cyclometalated bipy complex and the classically cyclometalated phpy and bq complexes. While double hydrogen‐atom transfer from C₂H₆ to [Pt(bipy? H)]⁺, followed by ring rotation, gives rise to the formation of [Pt(H)(bipy)]⁺, for the phpy and bq complexes [Pt(L? H)]⁺, the cyclometalated motif is conserved; rather, according to DFT calculations, formation of [Pt(L? H)(H₂)]⁺ as the ionic product accounts for C₂H₄ liberation. In the latter process, [Pt(L? H)(H₂)(C₂H₄)]⁺ (that carries H₂ trans to the nitrogen atom of the heterocyclic ligand) serves, according to DFT calculation, as a precursor from which, due to the electronic peculiarities of the cyclometalated ligand, C₂H₄ rather than H₂ is ejected. For both product‐ion types, [Pt(H)(bipy)]⁺ and [Pt(L? H)(H₂)]⁺ (L=phpy, bq), H₂ loss to close a catalytic dehydrogenation cycle is feasible. In the reactions of [Pt(bipy? H)]⁺ with the higher alkanes C_nH_2n+2 (n=3, 4), H₂ elimination dominates over alkene formation; most probably, this observation is a consequence of the generation of allyl complexes, such as [Pt(C₃H₅)(bipy)]⁺. In the reactions of [Pt(L? H)]⁺ (L=phpy, bq) with propane and n‐butane, the losses of the alkenes and dihydrogen are of comparable intensities. While in the reactions of “rollover”‐cyclometalated [Pt(bipy? H)]⁺ with C_nH_2n+2 (n=2–4) less than 15 % of the generated product ions are formed by C? C bond‐cleavage processes, this value is about 60 % for the reaction with neo‐pentane. The result that C? C bond cleavage gains in importance for this substrate is a consequence of the fact that 1,2‐elimination of two hydrogen atoms is no option; this observation may suggest that in the reactions with the smaller alkanes, 1,1‐ and 1,3‐elimination pathways are only of minor importance.     

Conformational analysis of some 1R,4S‐2‐arylidene‐p‐menthan‐3‐ones by 1H NMR spectroscopy and molecular simulation

Based on ¹H NMR spectral analysis combined with molecular simulation, conformational states of the cyclohexanone ring were studied for some 1R,4S‐2‐(4‐X‐benzylidene)‐p‐menthan‐3‐ones (X = COOCH₃ or C₆H₅) in CDCl₃ and C₆D₆. The co‐existence of chair conformers with an axial orientation of both alkyl substituents and twist‐boat forms was established for the compounds studied at room temperature (22–23° C). The substituent X does not influence appreciably the ratio of these conformers, but the fraction of twist‐boat forms increases noticeably in benzene solutions as compared with CDCl₃ solutions. Rotameric states of the isopropyl fragment were also characterised for the compounds studied. Distinctions in conformational states for the 1R,4S‐2‐arylidene‐p‐menthan‐3‐ones and (?)‐menthone were revealed and are discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

Two threefold interpenetrated two‐dimensional frameworks based on a flexible imidazole‐containing ligand and benzene‐1,4‐dicarboxylate

The open‐chain polyether‐bridged flexible ligand 1,2‐bis[2‐(1H‐1,3‐imidazol‐1‐ylmethyl)phenoxy]ethane (L) has been used to create two two‐dimensional coordination polymers under hydrothermal reaction of L with Cd^II or Co^II, in the presence of benzene‐1,4‐dicarboxylic acid (H₂bdc). In poly[[(μ₂‐benzene‐1,4‐dicarboxylato){μ‐1,2‐bis[2‐(1H‐1,3‐imidazol‐1‐ylmethyl)phenoxy]ethane}cadmium(II)] dihydrate], {[Cd(C₈H₄O₄)(C₂₂H₂₂N₄O₂)]·2H₂O}_n, (I), and the cobalt(II) analogue {[Co(C₈H₄O₄)(C₂₂H₂₂N₄O₂)]·2H₂O}_n, (II), the Cd^II and Co^II cations are six‐coordinated by four carboxylate O atoms from two different bdc²⁻ dianions in a chelating mode and two N atoms from two distinct L ligands. The metal ions, bdc²⁻ dianions and L ligands each sit across crystallographic twofold axes. The bdc²⁻ coordination mode and the coordinating orientation of the L ligand play an important role in constructing the novel two‐dimensional framework. Complexes (I) and (II) are threefold interpenetrated two‐dimensional frameworks; their structures are almost isomorphous, while the bond lengths, angles and hydrogen bonds are different in (I) and (II).     

Ligand‐to‐Ligand Charge‐Transfer Transitions of Platinum(II) Complexes with Arylacetylide Ligands with Different Chain Lengths: Spectroscopic Characterization,Effect of Molecular Conformations,and Density Functional Theory Calculations

The complexes [Pt(tBu₃tpy){C?C(C₆H₄C?C)_n?1R}]⁺ (n=1: R=alkyl and aryl (Ar); n=1–3: R=phenyl (Ph) or Ph‐N(CH₃)₂‐4; n=1 and 2, R=Ph‐NH₂‐4; tBu₃tpy=4,4’,4’’‐tri‐tert‐butyl‐2,2’:6’,2’’‐terpyridine) and [Pt(Cl₃tpy)(C?CR)]⁺ (R=tert‐butyl (tBu), Ph, 9,9’‐dibutylfluorene, 9,9’‐dibutyl‐7‐dimethyl‐amine‐fluorene; Cl₃tpy=4,4’,4’’‐trichloro‐2,2’:6’,2’’‐terpyridine) were prepared. The effects of substituent(s) on the terpyridine (tpy) and acetylide ligands and chain length of arylacetylide ligands on the absorption and emission spectra were examined. Resonance Raman (RR) spectra of [Pt(tBu₃tpy)(C?CR)]⁺ (R=n‐butyl, Ph, and C₆H₄‐OCH₃‐4) obtained in acetonitrile at 298 K reveal that the structural distortion of the C?C bond in the electronic excited state obtained by 502.9 nm excitation is substantially larger than that obtained by 416 nm excitation. Density functional theory (DFT) and time‐dependent DFT (TDDFT) calculations on [Pt(H₃tpy)(C?CR)]⁺ (R= n‐propyl (nPr), 2‐pyridyl (Py)), [Pt(H₃tpy){C?C(C₆H₄C?C)_n?1Ph}]⁺ (n=1–3), and [Pt(H₃tpy){C?C(C₆H₄C?C)_n?1C₆H₄‐N(CH₃)₂‐4}]⁺/+H⁺ (n=1–3; H₃tpy=nonsubstituted terpyridine) at two different conformations were performed, namely, with the phenyl rings of the arylacetylide ligands coplanar (“cop”) with and perpendicular (“per”) to the H₃tpy ligand. Combining the experimental data and calculated results, the two lowest energy absorption peak maxima, λ₁ and λ₂, of [Pt(Y₃tpy)(C?CR)]⁺ (Y=tBu or Cl, R=aryl) are attributed to ¹[π(C?CR)→π*(Y₃tpy)] in the “cop” conformation and mixed ¹[d_π(Pt)→π*(Y₃tpy)]/¹[π(C?CR)→π*(Y₃tpy)] transitions in the “per” conformation. The lowest energy absorption peak λ₁ for [Pt(tBu₃tpy){C?C(C₆H₄C?C)_n?1C₆H₄‐H‐4}]⁺ (n=1–3) shows a redshift with increasing chain length. However, for [Pt(tBu₃tpy){C?C(C6H4C?C)_n?1C₆H₄‐N(CH₃)₂‐4}]⁺ (n=1–3), λ₁ shows a blueshift with increasing chain length n, but shows a redshift after the addition of acid. The emissions of [Pt(Y₃tpy)(C?CR)]⁺ (Y=tBu or Cl) at 524–642 nm measured in dichloromethane at 298 K are assigned to the ³[π(C?CAr)→π*(Y₃tpy)] excited states and mixed ³[d_π(Pt)→π*(Y₃tpy)]/³[π(C?C)→π*(Y₃tpy)] excited states for R=aryl and alkyl groups, respectively. [Pt(tBu₃tpy){C?C(C₆H₄C?C)_n?1C₆H₄‐N(CH₃)₂‐4}]⁺ (n=1 and 2) are nonemissive, and this is attributed to the small energy gap between the singlet ground state (S₀) and the lowest triplet excited state (T₁).     

Regiodirected Synthesis and Stereochemistry of 2,4,8‐Trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes and α,ω‐Bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes

2,4,8‐Trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes have been obtained by the regioselective and stereoselective cyclocondensation of 1,2‐ethanediamine with aldehydes RCHO (R═Me, Et, Prⁿ, Buⁿ, Pentⁿ) and H₂S at molar ratio 1:3:2 at 0°C. The increase in molar ratio of thiomethylation mixture RCHO–H₂S (6:4) at 40°C resulted in selective formation of bis‐(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)ethanes. Cyclothiomethylation of aliphatic α,ω‐diamines with aldehydes RCHO (R═Me, Et) and H₂S at molar ratio 1:6:4 and at 40°С led to α,ω‐bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes. Stereochemistry of 2,4,8‐trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes have been determined by means of ¹H and ¹³С NMR spectroscopy and further supported by DFT calculations at the B3LYP/6‐31G(d,p) level. The structure of α,ω‐bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes was confirmed by single‐crystal X‐ray diffraction study.     

Thermal Stability of n‐Acyl Peroxynitrates

Peroxynitrates (RO₂NO₂), in particular acyl peroxynitrates (R = R′C(O) with R′ = alkyl), are prominent constituents of polluted air. In this work, a systematic study on the thermal decomposition rate constants of the first five members of the series of homologous R′C(O)O₂NO₂ with R′ = CH₃ ( =PAN), C₂H₅, n‐C₃H₇, n‐C₄H₉, and n‐C₅H₁₁ is undertaken to verify the conclusions from previous laboratory data (Grosjean et al., Environ. Sci. Technol. 1994, 28, 1099–1105; Grosjean et al., Environ. Sci. Technol. 1996, 30, 1038–1047; Bossmeyer et al., Geophys. Res. Lett. 2006, 33, L18810) that the longer chain peroxynitrates may be considerably more stable than PAN. Experiments are performed in a temperature‐controlled, evacuable 200 L‐photoreactor made from quartz. n‐Acyl peroxynitrates are generated by stationary photolysis of mixtures of molecular bromine, O₂, NO₂, and the corresponding parent aldehydes, highly diluted in N₂. Thermal decomposition of R′C(O)O₂NO₂ is initiated by the addition of an excess of NO. First‐order decomposition rate constants k₁ of the reactions R′C(O)O₂NO₂ (+M) → R′C(O)O₂ + NO₂ (+M) are derived at 298 K and a total pressure of 1 bar from the measured loss rates of R′C(O)O₂NO₂, correcting for wall loss of R′C(O)O₂NO₂ and several percentages of reformation of R′C(O)O₂NO₂ by the reaction of R′C(O)O₂ radicals with NO₂. With increasing chain length of R′, k₁(298 K) slightly decreases from 4.4 × 10^?4 s^?1 (R′ = CH₃) to 3.7 × 10^?4 s^?1 (R′ = C₂H₅), leveling off at (3.4 ± 0.1) × 10^?4 s^?1 for R′ = n‐C₃H₇, n‐C₄H₉, and n‐C₅H₁₁. Temperature dependencies of k₁ were measured for CH₃C(O)O₂NO₂ and n‐C₅H₁₁C(O)O₂NO₂ in the temperature range 289–308 K, resulting in the same activation energy within the statistical error limits (2σ) of 0.9 and 1.5 kJ mol^?1, respectively. A few experiments on n‐C₆H₁₃C(O)O₂NO₂, n‐C₇H₁₅C(O)O₂NO₂, and n‐C₈H₁₇C(O)O₂NO₂ were also performed, but the results were considered to be unreliable due to strong wall loss of the peroxynitrate and possible complications caused by radical‐sinitiated side reactions.     

catena‐Poly­[[(benzoato‐κO)silver(I)]‐μ‐2‐amino­pyrimidine‐κ2N1:N3]

The title complex, [Ag(C₇H₅O₂)(C₄H₅N₃)]_n, is a polymer based on a mononuclear silver(I)‐centered fragment. The Ag^I atom is trigonally coordinated by two N atoms from two 2‐­amino­pyrimidine ligands and one O atom from one benzoate anion, giving zigzag polymeric chains with an [–Ag—N—C—N–]_n backbone running along the a axis. It is proposed that intermolecular hydrogen bonding drives the formation of the chain polymer.     

Efficient Separation of n‐Butene and iso‐Butene by Flexible Ultramicroporous Metal‐Organic Frameworks with Pocket‐like Cavities

Efficient separation of n‐butene (n‐C₄H₈) and iso‐butene (iso‐C₄H₈) is of significance for the upgrading of C4 olefins to high‐value end products but remains one of the major challenges in hydrocarbon purifications owing to their similar structures. Herein, we report a flexible metal‐organic framework, MnINA (INA=isonicotinate), featuring one‐dimensional pore channels with periodically large pocket‐like cavities connected by narrow bottlenecks, for the first time for efficient n‐/iso‐C₄H₈ separation. MnINA with smaller pore size (4.62 Å) compared with CuINA (4.84 Å), exhibits steep adsorption isotherms and high capacity of 1.79 mmol g^?1 for n‐C₄H₈ (4.46 Å) through strong host‐guest interactions via C?H???π bonding. The narrow bottlenecks exert barriers for the large molecules of iso‐C₄H₈ (4.84 Å) within the gate‐opening pressure range of 0–0.1 bar. This gives rise to MnINA with excellent separation selectivity of 327.7 for n‐/iso‐C₄H₈ mixture. The adsorption mechanism for n‐C₄H₈ and the gate‐opening effect were investigated by dispersion‐corrected density functional (DFT‐D) theory, verifying the strong interactions between n‐C₄H₈ and the frameworks as well as the gate‐opening effect derived from the rotation of organic linkers. The breakthrough tests confirmed MnINA and CuINA can be promising candidates for n‐/iso‐C₄H₈ separation.     

4,6‐Dinitro‐N,N′‐di‐n‐octylbenzene‐1,3‐diamine, 4,6‐dinitro‐N,N′‐di‐n‐undecylbenzene‐1,3‐diamine and N,N′‐bis(2,4‐dinitrophenyl)octane‐1,8‐diamine

4,6‐Dinitro‐N,N′‐di‐n‐octylbenzene‐1,3‐diamine, C₂₂H₃₈N₄O₄, (I), 4,6‐dinitro‐N,N′‐di‐n‐undecylbenzene‐1,3‐diamine, C₂₈H₅₀N₄O₄, (II), and N,N′‐bis(2,4‐dinitrophenyl)octane‐1,8‐diamine, C₂₀H₂₄N₆O₈, (III), are the first synthetic meta‐dinitroarenes functionalized with long‐chain aliphatic amine groups to be structurally characterized. The intra‐ and intermolecular interactions in these model compounds provide information that can be used to help understand the physical properties of corresponding polymers with similar functionalities. Compounds (I) and (II) possess near‐mirror symmetry, with the octyl and undecyl chains adopting fully extended anti conformations in the same direction with respect to the ring. Compound (III) rests on a center of inversion that occupies the mid‐point of the central C—C bond of the octyl chain. The middle six C atoms of the chain form an anti arrangement, while the remaining two C atoms take hard turns almost perpendicular to the rest of the chain. All three molecules display intramolecular N—H...O hydrogen bonds between the amine and nitro groups, with the same NH group forming a bifurcated intermolecular hydrogen bond to the nitro O atom of an adjacent molecule. In each case, these interactions link the molecules into one‐dimensional molecular chains. In (I) and (II), these chains pack so that the pendant alkyl groups are interleaved parallel to one another, maximizing nonbonded C—H contacts. In (III), the alkyl groups are more isolated within the molecular chains and the primary nonbonded contacts between the chains appear to involve the nitro groups not involved in the hydrogen bonding.     

BASHD‐J‐resolved‐HMBC,an efficient method for measuring proton–proton and heteronuclear long‐range coupling constants

Natural products often possess various spin systems consisting of a methine group directly bonded to a methyl group (e.g. –CH_a–CH_b(CH₃)–CH_c–). The methine proton H_b splits into a broadened multiplet by coupling with several vicinal protons, rendering analysis difficult of ⁿJ_C–H with respect to H_b in the J‐resolved HMBC‐1. In purpose of the reliable and easy measurements of ⁿJ_C–H and ⁿJ_H–H in the aforesaid spin system, we have developed a new technique, named BASHD‐J‐resolved‐HMBC. This method incorporates band selective homo decoupled pulse and J‐scaling pulse into HMBC. In this method, high resolution cross peaks can be observed along the F₁ axis by J‐scaling pulse, and band selective homo decoupled pulse simplified multiplet signals. Determinations of ⁿJ_C–H and ⁿJ_H–H of multiplet signals can easily be performed using the proposed pulse sequence. Copyright © 2013 John Wiley & Sons, Ltd.     

Energetic propane‐1,3‐diaminium and butane‐1,4‐diaminium salts of N,N′‐dinitroethylenediazanide: syntheses,crystal structures and thermal properties

The acidity of the amine H atoms and the consequent salt formation ability of ethylenedinitramine (EDNA) were analyzed in an attempt to improve the thermal stability of EDNA. Two short‐chain alkanediamine bases, namely propane‐1,3‐diamine and butane‐1,4‐diamine, were chosen for this purpose. The resulting salts, namely propane‐1,3‐diaminium N,N′‐dinitroethylenediazanide, C₃H₁₂N₂²⁺·C₂H₄N₄O₄^2?, and butane‐1,4‐diaminium N,N′‐dinitroethylenediazanide, C₄H₁₄N₂²⁺·C₂H₄N₄O₄^2?, crystallize in the orthorhombic space group Pbca and the monoclinic space group P2₁/n, respectively. The resulting salts display extensive hydrogen‐bonding networks because of the presence of ammonium and diazenide ions in the crystal lattice. This results in an enhanced thermal stability and raises the thermal decomposition temperatures to 202 and 221 °C compared to 180 °C for EDNA. The extensive hydrogen bonding present also plays a crucial role in lowering the sensitivity to impact of these energetic salts.     

Alkyl levulinates as `green chemistry' precursors: butane‐1,4‐diyl bis(4‐oxopentanoate) and hexane‐1,6‐diyl bis(4‐oxopentanoate)

Levulinic acid derivatives are potential `green chemistry' renewably sourced molecules with utility in industrial coatings applications. Suitable single crystals of the centrosymmetric title compounds, C₁₄H₂₂O₆ and C₁₆H₂₆O₆, respectively, were obtained with difficulty. The data for the latter hexane‐1,6‐diyl compound were extracted from the major fragment of a three‐component twinned crystal. Both compounds crystallize in similar‐sized unit cells with identical symmetry, utilizing the same weak nonconventional attractive C—H...O(ketone) hydrogen bonds via C(4) and C(5) motifs, which expand to R²₂(30) ring and C²₂(14) chain motifs. Their different packing orientations in similar‐sized unit cells suggest that crystal growth involving packing mixes could lead to intergrowths or twins.     

Carbonyl–carbonyl and carbonyl–π interactions as directing motifs in the supramolecular structure of carbonyl(3‐oxopenta‐1,4‐diene‐1,5‐diyl)[tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN2)methane]iridium(III) trifluoromethanesulfonate

In the title complex salt, [Ir(C₅H₄O)(C₁₆H₂₂N₆)(CO)](CF₃O₃S), the Ir^III centre adopts a distorted octahedral geometry with a facial coordination of the tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane ligand. The C—C distances of the iridacycle are in agreement with its iridacyclohexa‐2,5‐dien‐4‐one nature, which presents a nonsymmetric boat‐like conformation with the C—Ir—C vertex more bent than the C—C(=O)—C vertex. The supramolecular architecture is mainly directed by CO...CO and CO...π and Csp³—H...O interactions, the arrangement of which depends on the anion.     

Strong hydrogen bonds in the ionic pair (1,3‐diisopropyl‐4,5‐dimethyl‐4‐imidazolin‐2‐yl­idene)ammonium trichloro­(1,3‐diisopropyl‐4,5‐dimethyl‐4‐imidazolin‐2‐ylideneamine)­iron(II)

The title compound, (C₁₁H₂₂N₃)[FeCl₃(C₁₁H₂₁N₃)], is one of the rare examples where an isolated ionic pair of the type [A]ⁿ⁺[EMX₃]ⁿ⁻ (E is any non‐metal, M is any transition metal and X is any halogen) could be structurally characterized. Two short N—H⋯Cl contacts between the two ammonium H atoms and two of the three Cl atoms of the counter‐anion generate a six‐membered ring. The third Cl atom is involved in a weaker intra­molecular hydrogen bond to the neutral 1,3‐diisopropyl‐4,5‐dimethyl‐4‐imidazolin‐2‐yl­idene­amine ligand.     

Studies on Properties of Tetra‐p‐nitro‐tetra‐O‐alkylcalix[4]arenes

Ibis paper reports the properties of the novel tetra‐p‐nitro‐tetra‐O‐alkyl‐calix[4]arenes (alkyl= n‐C₄H₉, 1; n‐C₈H₁₇ 2; n‐C₁₂H₂₅, 3; n‐C₁₆H₃₃, 4). X‐ray crystallographic analysis and ¹H NMR revealed that they exist as pinched‐cone conformation in crystal or cone conformation in solution. EFISH experiments at 1064 nm in CHCl₃, indicated that tetra‐p‐nitro‐tetra‐O‐butyl‐calix[4]arene (1) has higher hyperpolarizability β, values than the corresponding reference compound p‐nitro‐phenyl butyl ether, without red shift of the charge transfer band. Compounds 2, 3 and 4 with longer alkyl chains can form monolayer at the air/water.     

catena‐Poly[copper(II)‐di‐μ‐acetylacetonato‐copper(II)‐bis(μ‐4‐hydroxy‐3‐methoxybenzaldehyde picoloylhydrazonato)] and (acetylacetonato)(4‐methoxybenzaldehyde picoloylhydrazonato)copper(II)

In the two title copper(II) complexes, [CuL(C₅H₇O₂)]_n, (I), and [CuL′(C₅H₇O₂)], (II), respectively, where HL is 4‐hydroxy‐3‐methoxybenzaldehyde picoloylhydrazone, C₁₄H₁₂N₃O₃, and HL′ is 4‐methoxybenzaldehyde picoloylhydrazone, C₁₄H₁₂N₃O₂, the Cu^II ions display a highly Jahn–Teller‐distorted octahedral and a square‐planar coordination geometry, respectively. In complex (I), two neighbouring Cu^II atoms are bridged by L⁻ and acetylacetonate, alternately, giving rise to a one‐dimensional chain of CuN₂O₄ octahedra interconnected by these two ligands along the a axis. In addition, the hydroxy H atom of the vanillin group connects to the carboxyl O atom of the adjacent chain via an O—H...O hydrogen bond, giving rise to a three‐dimensional supramolecular assembly. Complex (II) displays a discrete structure.     

N,N:N′,N′‐Bis(2,2'‐dihydroxy­biphen­yl‐3,3'‐dimethyl­idene)benzene‐1,2‐diamine dimeth­yl sulfoxide tetra­solvate

The title compound, 8,15,28,35‐tetra­aza­hepta­cyclo[35.3.1.1^2,6.1^17,21.1^22,26.0^9,14·0^29,34]tetraconta‐1(41),2,4,6(42),7,9,11,13,15,17,19,21(43),22,24,26(44),27,29,31,33,35,37,39‐docosaene‐41,42,43,44‐tetrol dimeth­yl sulfoxide tetra­solvate, C₄₀H₂₈N₄O₄·4C₂H₆OS, adopts a chair‐shaped C_2h symmetric conformation with crystallographically imposed inversion symmetry. Four intra­molecular hydrogen bonds are observed between phenol O and imine N atoms.