White‐Light Emission Strategy of a Single Organic Compound with Aggregation‐Induced Emission and Delayed Fluorescence Properties

A novel white‐light‐emitting organic molecule, which consists of carbazolyl‐ and phenothiazinyl‐substituted benzophenone (OPC) and exhibits aggregation‐induced emission‐delayed fluorescence (AIE‐DF) and mechanofluorochromic properties was synthesized. The CIE color coordinates of OPC were directly measured with a non‐doped powder, which presented white‐emission coordinates (0.33, 0.33) at 244 K to 252 K and (0.35, 0.35) at 298 K. The asymmetric donor–acceptor–donor′ (D‐A‐D′) type of OPC exhibits an accurate inherited relationship from dicarbazolyl‐substituted benzophenone (O2C, D‐A‐D) and diphenothiazinyl‐substituted benzophenone (O2P, D′‐A‐D′). By purposefully selecting the two parent molecules, that is, O2C (blue) and O2P (yellow), the white‐light emission of OPC can be achieved in a single molecule. This finding provides a feasible molecular strategy to design new AIE‐DF white‐light‐emitting organic molecules.     

Photoactivatable Aggregation‐Induced Emission Fluorophores with Multiple‐Color Fluorescence and Wavelength‐Selective Activation

Photoactivatable (caged) fluorophores are widely used in chemistry, materials, and biology. However, the development of such molecules exhibiting photoactivable solid‐state fluorescence is still challenging due to the aggregation‐caused quenching (ACQ) effect of most fluorophores in their aggregate or solid states. In this work, we developed caged salicylaldehyde hydrazone derivatives, which are of aggregation‐induced emission (AIE) characteristics upon light irradiation, as efficient photoactivatable solid‐state fluorophores. These compounds displayed multiple‐color emissions and ratiometric (photochromic) fluorescence switches upon wavelength‐selective photoactivation, and were successfully applied for photopatterning and photoactivatable cell imaging in a multiple‐color and stepwise manner.     

Synthesis and Design of Aggregation‐Induced Emission Surfactants: Direct Observation of Micelle Transitions and Microemulsion Droplets

The direct visualization of micelle transitions is a long‐standing challenge owing to the intractable aggregation‐caused quenching of light emission in the micelle solution. Herein, we report the synthesis of a surfactant with a tetraphenylethene (TPE) core and aggregation‐induced emission (AIE) characteristics. The transition processes of surfactant micelles and the microemulsion droplets (MEDs) formed by the surfactant with a TPE core were clearly visualized by a high‐contrast fluorescence imaging method. The fluorescence intensity of the MEDs decreased as the size of MEDs increased as a result of weakening of the restriction of intramolecular rotation (RIR). The results of this study deepen our understanding of micelle‐transition processes and provide solid evidence in favor of the hypothesis that the AIE phenomenon has its origin in the RIR of fluorophores in the aggregate state.     

Fluorescent Polymeric Micelles with Tetraphenylethylene Moieties and Their Application for the Selective Detection of Glucose

By linking TPE moieties that exhibit aggregation‐induced (enhanced) emission to the amphiphilic copolymer 1 , fluorescent micelles are prepared and characterized. The polymeric micelles exhibit relatively strong fluorescence which can be tuned by heating and cooling. By combining cascaded enzymatic (oxidation of D ‐glucose with GOx) and chemical (oxidation of I^– by H₂O₂) reactions, the fluorescent micelles of copolymer 1 are successfully utilized for the selective detection of D ‐glucose in aqueous solution. The influences of proteins (e.g., bovine serum albumin) and reductants (e.g., ascorbic acid) on this fluorescence detection of D ‐glucose are also discussed.

     

Aggregation‐Induced Emission and Aggregation‐Promoted Photo‐oxidation in Thiophene‐Substituted Tetraphenylethylene Derivative

Aggregation‐induced emission combined with aggregation‐promoted photo‐oxidation has been reported only in two works quite recently. In fact, this phenomenon is not commonly observed for AIE‐active molecules. In this work, a new tetraphenylethylene derivative (TPE‐4T) with aggregation‐induced emission (AIE) and aggregation‐promoted photo‐oxidation was synthesized and investigated. The pristine TPE‐4T film exhibits strong bluish‐green emission, which turns to quite weak yellow emission after UV irradiation. Interestingly, after solvent treatment, the weakly fluorescent intermediate will become bright‐yellow emitting. Moreover, the morphology of the TPE‐4T film could be regulated by UV irradiation. The wettability of the TPE‐4T microcrystalline surface is drastically changed from hydrophobic to hydrophilic. This work contributes a new member to the aggregation induced photo‐oxidation family and enriches the photo‐oxidation study of tetraphenylethylene derivatives.     

A Fluorogenic Probe with Aggregation‐Induced Emission Characteristics for Carboxylesterase Assay through Formation of Supramolecular Microfibers

Herein, we report a novel fluorescent “light‐up” probe useful for carboxylesterase assay that is based on a tetraphenylethylene derivative containing carboxylic ester groups. The specific cleavage of the carboxylic ester bonds by carboxylesterase results in the generation of a relatively hydrophobic moiety that self‐assembles into supramolecular microfibers, thus giving rise to “turn‐on” fluorescent signals. A high sensitivity towards carboxylesterase was achieved with a detection limit as low as 29 pM , which is much lower than the corresponding assays based on other fluorescent approaches.     

Anthracene Modified by Aldehyde Groups Exhibiting Aggregation‐Induced Emission Properties

In order to get an easy way to achieve the transformation from aggregation‐caused quenching luminophores (ACQphores) to aggregation‐induced emission luminogens (AIEgens), we took aldehyde groups as the modifying group to decorate anthracene. The fluorescence performances of 9‐anthraldehyde (AnA) and 9,10‐anthracenedicarboxaldehyde (AnDA) in solution and aggregated state were studied. We found out that the aldehyde group can transform anthracene with aggregation‐caused quenching properties to AIEgen. The single‐crystal structures analysis of AnA and AnDA showed that their structure characteristics are responsible for the AIE properties of AnA and AnDA. On one hand, the aldehyde group can cause steric effects to lower intermolecular π‐π packing style in aggregated state. On the other hand, intermolecular H‐bonding interactions can restrict the intramolecular rotation and suppress internal charge transfer. These results may supply a new simple method for the transformation from ACQphores to AIEgens on the point of the molecular design.     

Specific Light‐Up Bioprobe with Aggregation‐Induced Emission and Activatable Photoactivity for the Targeted and Image‐Guided Photodynamic Ablation of Cancer Cells

Activatable photosensitizers (PSs) have been widely used for the simultaneous fluorescence imaging and photodynamic ablation of cancer cells. However, the ready aggregation of traditional PSs in aqueous media can lead to fluorescence quenching as well as reduced phototoxicity even in the activated form. We have developed a series of PSs that show aggregation‐enhanced emission and phototoxicity and thus the exact opposite behavior to that of previously reported PSs. We further developed a dual‐targeted enzyme‐activatable bioprobe based on the optimized photosensitizer and describe simultaneous light‐up fluorescence imaging and activated photodynamic therapy for specific cancer cells. The design of smart probes should thus open new opportunities for targeted and image‐guided photodynamic therapy.     

Boron Diiminate with Aggregation‐Induced Emission and Crystallization‐Induced Emission‐Enhancement Characteristics

Organoboron complexes having aggregation‐ and crystalization‐induced emission properties are presented. The series of boron diiminates were synthesized and the emission behaviors of the synthesized compounds were investigated. Finally, it was found that significant enhancement of the emission depended on the crystallinity in the solid states.     

New Aggregation‐Induced Emitters: Tetraphenyldistyrylbenzenes

The synthesis of five novel distyrylbenzene (DSB) derivatives, featuring a central tetraphenylbenzene core, is reported. The targets show aggregation‐induced emission (AIE), which, however, is substituent‐dependent. For the pure hydrocarbon and derivatives that do not carry (+M) or (?M) substituents, classic AIE behavior is observed, that is, the DSBs are non‐fluorescent in solution, but are highly fluorescent in cold matrices, upon aggregate formation in poor solvents and in the solid, crystalline state. If aldehyde or dibutylamino groups are attached in the para‐position of the DSB unit, non‐classic AIE‐phores result. These are fluorescent both in dilute solution as well as in the solid state. Prolonged irradiation of the targets leads to benzotetraphene derivatives by a double cyclization.     

Aggregation‐Induced Emission of Hexaphenyl‐1,3‐butadiene

A new type of AIE molecules based on hexaphenyl‐1,3‐butadienes was reported with respect to the synthesis and characterization. This material exhibited different maximum emission wavelength and enhanced emission intensity at different aggregate state (amorphous and crystalline state).     

Fluorescent Bioprobes: Structural Matching in the Docking Processes of Aggregation‐Induced Emission Fluorogens on DNA Surfaces

Whereas most conventional DNA probes are flat disklike aromatic molecules, we explored the possibility of developing quadruplex sensors with nonplanar conformations, in particular, the propeller‐shaped tetraphenylethene (TPE) salts with aggregation‐induced emission (AIE) characteristics. 1,1,2,2‐Tetrakis[4‐(2‐triethylammonioethoxy)phenyl]ethene tetrabromide (TPE‐ 1 ) was found to show a specific affinity to a particular quadruplex structure formed by a human telomeric DNA strand in the presence of K⁺ ions, as indicated by the enhanced and bathochromically shifted emission of the AIE fluorogen. Steady‐state and time‐resolved spectral analyses revealed that the specific binding stems from a structural matching between the AIE fluorogen and the DNA strand in the folding process. Computational modeling suggests that the AIE molecule docks on the grooves of the quadruplex surface with the aid of electrostatic attraction. The binding preference of TPE‐ 1 enables it to serve as a bioprobe for direct monitoring of cation‐driven conformational transitions between the quadruplexes of various conformations, a job unachievable by the traditional G‐quadruplex biosensors. Methyl thiazolyl tetrazolium (MTT) assays reveal that TPE‐ 1 is cytocompatible, posing no toxicity to living cells.     

Structure‐Dependent cis/trans Isomerization of Tetraphenylethene Derivatives: Consequences for Aggregation‐Induced Emission

The isomerization and optical properties of the cis and trans isomers of tetraphenylethene (TPE) derivatives with aggregation‐induced emission (AIEgens) have been sparsely explored. We have now observed the tautomerization‐induced isomerization of a hydroxy‐substituted derivative, TPETH‐OH, under acidic but not under basic conditions. Replacing the proton of the hydroxy group in TPETH‐OH with an alkyl group leads to the formation of TPETH‐MAL, for which the pure cis and trans isomers were obtained and characterized by HPLC analysis and NMR spectroscopy. Importantly, cis‐TPETH‐MAL emits yellow fluorescence in DMSO at ?20 °C whereas trans‐TPETH‐MAL shows red fluorescence under the same conditions. Moreover, the geometry of cis‐ and trans‐TPETH‐MAL remains unchanged when they undergo thiol–ene reactions to form cis‐ and trans‐TPETH‐cRGD, respectively. Collectively, our findings improve our fundamental understanding of the cis/trans isomerization and photophysical properties of TPE derivatives, which will guide further AIEgen design for various applications.     

An Aggregation‐Induced‐Emission Platform for Direct Visualization of Interfacial Dynamic Self‐Assembly

An in‐depth understanding of dynamic interfacial self‐assembly processes is essential for a wide range of topics in theoretical physics, materials design, and biomedical research. However, direct monitoring of such processes is hampered by the poor imaging contrast of a thin interfacial layer. We report in situ imaging technology capable of selectively highlighting self‐assembly at the phase boundary in real time by employing the unique photophysical properties of aggregation‐induced emission. Its application to the study of breath‐figure formation, an immensely useful yet poorly understood phenomenon, provided a mechanistic model supported by direct visualization of all main steps and fully corroborated by simulation and theoretical analysis. This platform is expected to advance the understanding of the dynamic phase‐transition phenomena, offer insights into interfacial biological processes, and guide development of novel self‐assembly technologies.     

Measurement of Solubilization Location in Micelles Using Anchored Aggregation‐Induced Emission Donors

Solubilization locations play a critical role in developing advanced surfactants and improving solubilization power in micelle‐based applications. However, the current polarity‐based techniques for measuring solubilization locations could come to conflicting conclusions. The key challenge is the unpredictable polarities in the micellar microenvironment. Now, an approach that is independent of micellar polarities is used to measure solubilization locations by covalently linking tetraphenylethylene (TPE) to the alkyl chain end of cationic surfactants. The solubilization locations of solubilized acceptors in the TPE‐cored spherical micelles were accurately measured by calculating the Förster resonance energy transfer distance between anchored TPE donors and solubilized acceptors. Solubilization locations of solubilized substances in the micellar interior and at the micellar surface depend on their size and hydrophobicity, respectively.     

Fluorescence Detection of Microcapsule‐Type Self‐Healing,Based on Aggregation‐Induced Emission

An extrinsic self‐healing coating system containing tetraphenylethylene (TPE) in microcapsules was monitored by measuring aggregation‐induced emission (AIE). The core healing agent comprised of methacryloxypropyl‐terminated polydimethylsiloxane, styrene, benzoin isobutyl ether, and TPE was encapsulated in a urea‐formaldehyde shell. The photoluminescence of the healing agent in the microcapsules was measured that the blue emission intensity dramatically increased and the storage modulus also increased up to 10⁵ Pa after the photocuring. These results suggested that this formulation might be useful as a self‐healing material and as an indicator of the self‐healing process due to the dramatic change in fluorescence during photocuring. To examine the ability of the healing agent to repair damage to a coating, a self‐healing coating containing embedded microcapsules was scribed with a razor. As the healing process proceeded, blue light fluorescence emission was observed at the scribed regions. This observation suggested that self‐healing could be monitored using the AIE fluorescence.