Poly(ethylene imine)s as Antimicrobial Agents with Selective Activity

We report the structure–activity relationship in the antimicrobial activity of linear and branched poly(ethylene imine)s (L‐ and B‐PEIs) with a range of molecular weights (MWs) (500–12 000). Both L‐ and B‐PEIs displayed enhanced activity against Staphylococcus aureus over Escherichia coli. Both B‐ and L‐PEIs did not cause any significant permeabilization of E. coli cytoplasmic membrane. L‐PEIs induced depolarization of S. aureus membrane although B‐PEIs did not. The low MW B‐PEIs caused little or no hemolysis while L‐PEIs are hemolytic. The low MW B‐PEIs are less cytotoxic to human HEp‐2 cells than other PEIs. However, they induced significant cell viability reduction after 24 h incubation. The results presented here highlight the interplay between polymer size and structure on activity.

     

Fucoidan‐Mimetic Glycopolymers as Tools for Studying Molecular and Cellular Responses in Human Blood Platelets

The marine sulfated polysaccharide fucoidan displays superior ability to induce platelet aggregation compared to other sulfated polysaccharides. As such, it is an attractive tool for studying molecular and cellular responses in activated platelets. The heterogeneous structure, however, poses a problem in such applications. This study describes the synthesis of sulfated α‐l ‐fucoside‐pendant poly(methacryl amides) with homogeneous structures. By using both thiol‐mediated chain transfer and reversible addition‐fragmentation chain transfer polymerization techniques, glycopolymers with different chain lengths are obtained. These glycopolymers show platelet aggregation response and surface changes similar to those of fucoidan, and cause platelet activation through intracellular signaling as shown by extensive protein tyrosine phosphorylation. As the platelet activating properties of the glycopolymers strongly mimic those of fucoidan, this study concludes these fucoidan‐mimetic glycopolymers are unique tools for studying molecular and cellular responses in human blood platelets.

     

Structural characterization of radiation‐grafted block copolymer films,using SANS technique

We report small‐angle neutron scattering studies of grafted copolymer films of perfluorinated poly(ethylene propylene), FEP, base polymer and polystyrene, PS, grafted blocks. The films show highly anisotropic scattering patterns, revealing nematic‐like ordering of the crystalline domain structure as a consequence of the processing conditions. Upon grafting, the styrene swells the amorphous domains in the copolymer formation. For styrene content beyond roughly 15%, the amorphous regimes increase on the cost of crystalline domains. To stabilize the rather well‐defined domain structure already given by the original FEP base material, the samples need to be cross‐linked. Without cross‐linking, the nanometer length scale domains vanish, and some large scale structure takes over, likely driven by the immiscibility between FEP and PS. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1660–1668, 2008     

Antimicrobial Peptide‐Based Electrospun Fibers for Wound Healing Applications

Current wound healing treatments such as bandages and gauzes predominantly rely on passively protecting the wound and do not offer properties that increase the rate of wound healing. While these strategies are strong at protecting any infection after application, they are ineffective at treating an already infected wound or assisting in tissue regeneration. Next‐generation wound healing treatments are being developed at a rapid pace and have a variety of advantages over traditional treatments. Features such as gas exchange, moisture balance, active suppression of infection, and increased cell proliferation are all central to developing the next successful wound healing dressing. Electrospinning has already been shown to have the qualities required to be a key technique of next generation polymer‐based wound healing treatments. Combined with antimicrobial peptides (AMPs), electrospun dressings can indeed become a formidable solution for the treatment of both acute and chronic wounds. The literature on combining electrospinning and AMPs is now starting to increase and this review aims to give a comprehensive overview of the current developments that combine electrospinning technology and AMPs in order to make multifunctional fibers effective against infection in wound healing.     

Emulsion and Foam Templating—Promising Routes to Tailor‐Made Porous Polymers

Emulsions, foams, and foamed emulsions have been used successfully as templates for the synthesis of macroporous polymers. Based on this knowledge this Minireview presents strategies to use, optimise, and upscale these templating methods to synthesise tailor‐made porous polymers. The uniqueness of such polymers lies in the ability to tailor their structures and, therefore, their properties. However, systematic studies on structure–property relations are lacking mainly because the templating scientific community is “split into two”: the polydisperse and monodisperse camps. Thus, it is time to build a bridge between the camps, that is, to synthesise porous polymers with very different structures from the same precursors to determine the relationship between the structure and the properties.     

Benzo[2,1‐b;3,4‐b′]dithiophene‐based low‐bandgap polymers for photovoltaic applications

The synthesis of four alternating copolymers using benzo[2,1‐b;3,4‐b′]dithiophene (BDP) as the common donor unit is presented. Before the synthesis, theoretical calculations that we performed predicted that the incorporation of BDP, which consists of fused dithiophene units with a benzene ring, into these polymers would produce a low‐lying highest occupied molecular orbital (HOMO) energy level. Low‐lying HOMO levels are desirable to produce high open circuit voltages (V_OC) in organic bulk heterojunction (BHJ) photovoltaic devices. The polymers' structural characterization, as well as the preliminary results of their performance in BHJ devices, using (6,6)‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor, is presented. The V_OC values follow the expected trend: increasing with decreasing HOMO level of the polymer. High V_OC values of 0.81 and 0.82 V have been obtained from two polymers: PBDPBT and PBDPDPP. The initial power conversion efficiency achieved in these unoptimized devices was 1.11% because of relatively low J_SC values. The variation observed in the J_SC values between the four polymers is discussed. Device performance is expected to increase with optimization of processing conditions for the devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Guest‐Adaptable and Water‐Stable Peptide‐Based Porous Materials by Imidazolate Side Chain Control

The peptide‐based porous 3D framework, ZnCar, has been synthesized from Zn²⁺ and the natural dipeptide carnosine (β‐alanyl‐L ‐histidine). Unlike previous extended peptide networks, the imidazole side chain of the histidine residue is deprotonated to afford Zn–imidazolate chains, with bonding similar to the zeolitic imidazolate framework (ZIF) family of porous materials. ZnCar exhibits permanent microporosity with a surface area of 448 m² g^?1, and its pores are 1D channels with 5 Å openings and a characteristic chiral shape. This compound is chemically stable in organic solvents and water. Single‐crystal X‐ray diffraction (XRD) showed that the ZnCar framework adapts to MeOH and H₂O guests because of the torsional flexibility of the main His‐β‐Ala chain, while retaining the rigidity conferred by the Zn–imidazolate chains. The conformation adopted by carnosine is driven by the H bonds formed both to other dipeptides and to the guests, permitting the observed structural transformations.     

Effect of Guanidinylation on the Properties of Poly(2‐aminoethylmethacrylate)‐Based Antibacterial Materials

The effect of converting ammonium into guanidine moieties, compared to other factors such as molecular weight or hydrophobicity, on the antibacterial activity is investigated for homo‐ and copolymers of 2‐aminoethylmethacrylate in solution or coatings. Polymers are obtained by free radical polymerization, polymer‐analogous guanidinylation is conducted with cyanamide; non‐leaching immobilization is achieved by LBL assembly of homopolymers or crosslinking of functional sidegroups in copolymers. Antibacterial activity to Escherichia coli or Bacillus subtilis is determined by different standard methods. Guanidinylation improves antibacterial activity and speed as well as cytotoxicity of hydrophilic homo‐ and copolymers in solution or coatings.

     

Gilch Synthesis of Poly(ortho‐Phenylene Vinylenes): A Powerful Access to High‐Molecular‐Weight Blue‐Emitting Polymers

For the first time, the successful Gilch synthesis of poly(ortho‐phenylene vinylenes) (ortho‐PPVs) is reported. The molar mass of the constitutionally homogeneous ortho‐PPVs reaches values as high as M_w ≈ 300 000 Da. The ortho‐connectivity of the repeating units forces the chains to assume closely packed conformations even in good solvents. Significant perturbation of the π–electron systems and considerable shortening of the conjugation lengths are the consequences. UV–vis absorption and photoluminescence maxima consequently are shifted clearly toward shorter wavelengths compared to, e.g., classic para‐PPVs.

     

Multivalent Design of Apoptosis‐Inducing Bid‐BH3 Peptide–Oligosaccharides Boosts the Intracellular Activity at Identical Overall Peptide Concentrations

Multivalent peptide–oligosaccharide conjugates were prepared and used to investigate the multivalency effect concerning the activity of Bid‐BH3 peptides in live cells. Dextran oligosaccharides were carboxyethylated selectively in the 2‐position of the carbohydrate units and activated for the ligation of N‐terminally cysteinylated peptides. Ligation through maleimide coupling was found to be superior to the native chemical ligation protocol. Monomeric Bid‐BH3 peptides were virtually inactive, whereas pentameric peptide conjugates induced apoptosis up to 20‐fold stronger at identical peptide concentrations. Comparison of lowly multivalent and highly multivalent peptide dextrans proved a multivalency effect in life cells which was specific for the BH3 peptide sequence.     

抗菌肽及类抗菌肽的设计、合成及应用

抗菌肽是大多数生物体中均存在的阳离子型短肽,其构成了生物免疫系统的重要部分。抗菌肽具有广谱高效的抗菌性和细胞选择性,其独特的膜破坏杀菌机制不易引起病原体的耐药性突变,有望成为新一代控制病原体的有效"抗生素"。但天然抗菌肽的提取成本高、产率低且周期长,不利于大规模生产推广,所以依托化学合成方法合成抗菌肽及其模拟聚合物应运而生。该方法为抗菌肽的设计及合成提供无限可能。本文介绍了抗菌肽的来源、结构和其作用机理并对现有的抗菌肽合成方法进行综述,阐述了现今抗菌肽及类抗菌肽的研究进展以及抗菌肽组装体的应用,最后对抗菌肽及类抗菌肽的发展前景作了展望,为开发高效、低毒的"新一代"抗生素提供重要信息和策略。     

Towards Molecular Design Rationalization in Branched Multi‐Thiophene Semiconductors: The 2‐Thienyl‐Persubstituted α‐Oligothiophenes

The introduction of branching in multi‐thiophene semiconductors, although granting the required solubility for processing, results in an increased molecular fluxionality and a higher level of distortion, thus hampering π conjugation. Accordingly, branched oligothiophenes require rationalization of their structure–reactivity relationships for target‐oriented design and optimization of the synthetic effort. Our current research on spiderlike oligothiophenes affords deep insight into the subject, and introduces new, easily accessible molecules with attractive functional properties. In particular, a regular series, T′X _Y , of five new multi‐thiophene systems, T′5₃ , T′8₄ , T′11₅ , T′14₆ , and T′17₇ , constituted by five, eight, 11, 14, and 17 thiophene units, respectively, their longest α‐conjugated chain consisting of tri‐, tetra‐, penta‐, hexa‐, and heptathiophene moieties, respectively, has been synthesized and fully characterized from the structural, spectroscopic, and electrochemical point of view. The electronic properties of the monomers and their electropolymerization ability are discussed and rationalized as a function of their molecular structure, particularly in comparison with the series of 5‐(2,2′‐dithiophene)yl‐persubstituted α‐oligothiophenes ( TX _Y ) previously reported by us. These oligothiophenes are easily accessible materials, with promising properties for applications as active layers in multifunctional organic devices including solar cells.     

Self‐organization of striped pattern of refractive indices in photopolymer film

We report on a self‐organized striped pattern of refractive indices in a photopolymer film. Silicon oxide (SiO₂) particles (1.3‐μm diameter) were dispersed on a cover glass above a monomer mixture (bifunctional methacrylate monomer, cyanoethylmethacrylate, and 2,4,6‐trimethylbenzoyldiphenylphosphine oxide), and the sample was uniformly irradiated from a tube light source. The self‐organized striped pattern was observed inside a 0.45‐mm thickness photopolymer film. In contrast, no pattern was observed in a 0.45‐mm thickness sample photopolymerized without particles on a cover glass. The results suggest that the SiO₂ particles acted as “lenses” and produced a light distribution reflecting the shape of the light source used during the irradiation. The photopolymerization extended in depth according to the light distribution, and then the striped pattern was generated inside a medium. The photopolymer film with the striped pattern has an angular dependence in the transmittance as a result of the microstructure and can be applied to a flexible optical transmission filter. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3351–3358, 2004     

Sponge‐Like Behaviour in Isoreticular Cu(Gly‐His‐X) Peptide‐Based Porous Materials

We report two isoreticular 3D peptide‐based porous frameworks formed by coordination of the tripeptides Gly‐L ‐His‐Gly and Gly‐L ‐His‐L ‐Lys to Cu^II which display sponge‐like behaviour. These porous materials undergo structural collapse upon evacuation that can be reversed by exposure to water vapour, which permits recovery of the original open channel structure. This is further confirmed by sorption studies that reveal that both solids exhibit selective sorption of H₂O while CO₂ adsorption does not result in recovery of the original structures. We also show how the pendant aliphatic amine chains, present in the framework from the introduction of the lysine amino acid in the peptidic backbone, can be post‐synthetically modified to produce urea‐functionalised networks by following methodologies typically used for metal–organic frameworks built from more rigid “classical” linkers.     

Cationic Poly([R]‐3‐hydroxybutyrate) Copolymers as Antimicrobial Agents

Poly([R]‐3‐hydroxybutyrate) (PHB), a natural biodegradable polyester, has attracted much attention as a new biomaterial because of its sustainability and good biocompatibility. In this study, it is discovered that PHB can be conveniently functionalized to obtain a number of platform chain architectures that may provide a wide range of functional copolymers. In a transesterification reaction, linear (di‐hydroxylated) and star shaped (tri‐ and tetra‐hydroxylated) PHB oligomers are synthesized, followed by copolymerization with 2‐(dimethylamino)ethyl methacrylate and quaternization with benzyl bromide to afford antimicrobial properties. The antimicrobial activities of the quaternary salts against clinically relevant pathogens on the interactions with outer and cytoplasmic membranes, lethal mechanisms, multipassage resistance, and synergy effect with antibiotics are investigated. Cationic PHB copolymers show effectiveness as antimicrobial agents, with minimum inhibitory concentration values 0.24–0.65 µm (or µmol dm^?3) (or 32–128 µg mL^?1) against Gram‐positive and Gram‐negative bacteria. Modifying the copolymer architectures into star shapes results in enhanced effectiveness to disrupt the membrane integrity. Synergistic effects are attained for all the quaternized PHB derivatives when they are used together with tobramycin. Multipassage resistance does not occur in both the linear and star derivatives against Gram‐negative bacteria after 20 passages.     

Molecular Level Characterization of the Structure and Interactions in Peptide‐Functionalized Metal–Organic Frameworks

We use density functional theory, newly parameterized molecular dynamics simulations, and last generation ¹⁵N dynamic nuclear polarization surface enhanced solid‐state NMR spectroscopy (DNP SENS) to understand graft–host interactions and effects imposed by the metal–organic framework (MOF) host on peptide conformations in a peptide‐functionalized MOF. Focusing on two grafts typified by MIL‐68‐proline ( ‐Pro ) and MIL‐68‐glycine‐proline ( ‐Gly‐Pro ), we identified the most likely peptide conformations adopted in the functionalized hybrid frameworks. We found that hydrogen bond interactions between the graft and the surface hydroxyl groups of the MOF are essential in determining the peptides conformation(s). DNP SENS methodology shows unprecedented signal enhancements when applied to these peptide‐functionalized MOFs. The calculated chemical shifts of selected MIL‐68‐NH‐ Pro and MIL‐68‐NH‐ Gly‐Pro conformations are in a good agreement with the experimentally obtained ¹⁵N NMR signals. The study shows that the conformations of peptides when grafted in a MOF host are unlikely to be freely distributed, and conformational selection is directed by strong host–guest interactions.     

Synthesis and polymerization of new di‐octadecyl ester derivatives of α‐hydroxymethyl acrylate: A structure‐property correlation for their copolymers with methyl methacrylate

New ether dimer (ED‐Od) and diester (ODE) derivatives of α‐hydroxymethylacrylate, each having two octadecyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature. The free radical polymerizations of both monomers yielded high‐molecular weight polymers. Cyclopolymer formation of ED‐Od was confirmed by ¹³C NMR analysis and the cyclization efficiency (0.95 or greater) was found to be as high as the cyclization efficiencies of the cyclopolymerizations of ether dimers of various alkyl α‐hydroxymethylacrylates synthesized previously. Copolymers of both ED‐Od and ODE with methyl methacrylate (MMA) showed significant T_g decreases over PMMA due to octadecyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of octadecyl methacrylate, ED‐Od and ODE with MMA revealed that the impacts of these monomers on depression of T_g's are identical. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the octadecyl side groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7785–7793, 2008     

Isomer‐dependent properties of poly(vinyl pyridine)‐based films grown on copper surfaces

The effect of poly(2‐vinyl pyridine) (P2VP) and poly(4‐vinyl pyridine) (P4VP) isomers on the growth of surface films on copper substrates was studied by electrochemical, spectroscopic, thermogravimentric, and microscopic methods. In acid environment (3% v/v acetic acid) and in the presence of KSCN, electrochemically generated copper cations reacted rapidly with SCN^? and P2VP or P4VP, yielding coordination compounds, which deposited onto copper surfaces as films. The characteristics of such polymer–metal complexes (films) were markedly isomer‐dependent. Cu(I)/P2VP/SCN^? complexes with monovalent cations and sulfur‐coordinated thiocyanate were obtained in the presence of P2VP, whereas the formation of Cu(II)/P4VP/SCN^? complexes with divalent cations and nitrogen‐coordinated thiocyanate was observed in the presence of P4VP. Interestingly, similar physical–chemical properties (electronic structure, stoichiometry, and thermal behavior) were observed for materials synthesized by electrochemical and chemical methods. These results suggest, therefore, that control over the surface properties of copper substrates can be achieved using electrosynthesized films based on different PVP isomers. Besides acting as effective protective barriers against aggressive media and thus reducing the metal dissolution (corrosion) kinetics, these materials are potentially attractive for other applications in which surface properties are paramount, such as in catalysis. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 215–225, 2009