Deep eutectic solvent as an operative media on structure-reactivity relationships

Deep eutectic solvents seem to be environmentally friendly solvents, particularly because they are prepared easily and have very low-vapor pressures under ambient conditions. They are suitable candidates as green solvents for reaction media with special properties. To present this behavior, substitution reactions of some para- and meta-substituted anilines with 1-fluoro-2,4-dinitrobenzene have been spectrophotometrically investigated in varying mole fractions of ethaline as a deep eutectic solvent in dimethyl sulfoxide (DMSO). The measured rate coefficients of the reaction demonstrated a noticeable variation with the increasing mole fraction of ethaline in ethaline-DMSO mixtures. The linear free energy relationship (LFER) of second-order rate coefficients based on Hammett's substituent constants demonstrates a reasonably linear straight line with a negative slope in different mole fractions of ethaline-DMSO mixtures. Another LFER investigation based on the polarity parameters of the media showed a good agreement with hydrogen bond donor and acceptor abilities of the solvent. Non-LFER assay according to the preferential solvation model confirmed differences between the microsphere solvation of the solute molecules and the bulk composition of the solvents.     

Solvatochromism and preferential solvation of Brooker's merocyanine in water–methanol mixtures

The excitation energy of Brooker's merocyanine in water–methanol mixtures shows nonlinear behavior with respect to the mole fraction of methanol, and it was suggested that this behavior is related to preferential solvation by methanol. We investigated the origin of this behavior and its relation to preferential solvation using the three‐dimensional reference interaction site model self‐consistent field method and time‐dependent density functional theory. The calculated excitation energies were in good agreement with the experimental behavior. Analysis of the coordination numbers revealed preferential solvation by methanol. The free energy component analysis implied that solvent reorganization and solvation entropy drive the preferential solvation by methanol, while the direct solute–solvent interaction promotes solvation by water. The difference in the preferential solvation effect on the ground and excited states causes the nonlinear excitation energy shift. © 2017 Wiley Periodicals, Inc.     

Solvent polarity and hydrogen bond effects on nucleophilic substitution reaction of 2‐bromo‐5‐nitrothiophene with piperidine

The reaction kinetics of 2‐bromo‐5‐nitro thiophene with piperidine was studied in a solvent with a mixture of propan‐2‐ol with methanol and n‐hexane at 25°C. The measured rate coefficients of the reaction demonstrated dramatic variations in propan‐2‐ol–n‐hexane mixtures and mild variations in propan‐2‐ol–methanol system. The second‐order rate coefficients of the reaction, k_A, decreased sharply with n‐hexane content. The multiparameter correlation of log k_A versus molecular‐microscopic solvent parameters shows interesting results in these solutions. Linear free energy relationship investigations confirm that polarity has a major effect on the reaction rate and hydrogen bond ability of the media has a slight effect on the reaction rate. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 185–190, 2011     

Solute–solvent interaction effects on second‐order rate constants of reaction between 1‐chloro‐2,4‐dinitrobenzene and aniline in alcohol–water mixtures

The second‐order rate coefficients for aromatic nucleophilic substitution reaction between 1‐chloro‐2,4‐dinitrobenzene and aniline have been measured in aqueous solutions of ethanol and methanol at 25°C. The plots of rate constants versus mole fraction of water show a maximum in all‐aqueous solutions. The effect of four empirical solvent parameters including hydrogen bond donor acidity (α) dipolarity/polarizability (π^*) normalized polarity (E^N_T) and solvophobicity (Sp) has been investigated. This investigation has been carried out by means of simple and multiple regression models. A dual‐parameter equation of log k₂ versus Sp and α was obtained in all‐aqueous solutions (n = 41, r = 0.962, s = 0.053, p = 0.0000). This equation shows that solvophobicity and hydrogen bond donor acidity are important factors in the occurrence of the reaction and they have opposite effects on reaction rate. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 90–97, 2005     

Ultra‐high‐pressure‐assisted extraction of wedelolactone and isodemethylwedelolactone from Ecliptae Herba and purification by high‐speed counter‐current chromatography

Ultra‐high‐pressure extraction combined with high‐speed counter‐current chromatography was employed to extract and purify wedelolactone and isodemethylwedelolactone from Ecliptae Herba. The operating conditions of ultra‐high‐pressure extraction were optimized using an orthogonal experimental design. The optimal conditions were 80% aqueous methanol solvent, 200 MPa pressure, 3 min extraction time and 1:20 (g/mL) solid–liquid ratio for extraction of wedelolactone and isodemethylwedelolactone. After extraction by ultra‐high pressure, the extraction solution was concentrated and subsequently extracted with ethyl acetate; a total of 2.1 g of crude sample was obtained from 100 g of Ecliptae Herba. A two‐phase solvent system composed of petroleum ether–ethyl acetate–methanol–water (3:7:5:5, v/v) was used for high‐speed counter‐current chromatography separation, by which 23.5 mg wedelolactone, 6.8 mg isodemethylwedelolactone and 5.5 mg luteolin with purities >95% were purified from 300 mg crude sample in a one‐step separation. This research demonstrated that ultra‐high‐pressure extraction combined with high‐speed counter‐current chromatography was an efficient technique for the extraction and purification of coumestans from plant material.     

Kinetics and modeling of (R,S)‐1‐phenylethanol acylation over lipase

The kinetics of the acylation of (R,S)‐1‐phenylethanol was investigated using lipase as a catalyst. The main parameters were temperature, reaction atmosphere, different acyl donors, and different amounts of acyl donor as well as the presence of some additives in the reaction mixture. The initial reaction rate increased with increasing temperature and with a decreasing amount of an acyl donor. The activated esters, such as isopropenyl‐ and vinyl acetate, exhibited very high acylation rates for R‐1‐phenylethanol, whereas low rates were obtained with ethyl acetate and 2‐methoxyethyl acetate. The addition of water and acetophenone decreased the acylation rate. A kinetic model was developed based on a sequential step mechanism, in which enzyme was reacting in the first step with an acyl donor followed by the reaction of a modified enzyme complex with the reactant, R‐1‐phenylethanol. Comparison with experimental data obtained at different temperatures allowed simplification of this model, leading to a kinetic equation with just one apparent parameter. The influence of the amount of acyl donor, ethyl acetate, could be quantitatively described by taking into account the competitive inhibition of the ethanol produced. The rate constants and apparent activation energy for experiments performed under different temperatures and the amounts of acylation agent were determined. The apparent activation energy was 24.5 kJ/mol. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 629–639, 2010     

Photo absorption of ‐coumaric acid in aqueous solution: RISM‐SCF‐SEDD theory approach

Photo absorption properties of p‐coumaric acid, the chromophore of photoactive yellow protein, in aqueous solution were investigated by means of reference interaction site model self‐consistent field with spatial electron density distribution (RISM‐SCF‐SEDD) method. RISM‐SCF‐SEDD is a combination methodology of electronic structure theory and statistical mechanics for molecular liquids. Here, time‐dependent density functional theory was coupled with RISM equation to study the electronic structure of p‐coumaric acid in aqueous system. Excitation energies of the chromophore in its neutral, two monoanionic and dianionic forms were computed to elucidate the effect of the deprotonation and solvation on the spectroscopic properties. We found that solvation strongly affects the excitation character of the chromophore, especially for phenolate anion and dianion. The free energy difference among the four protonation states is also discussed. © 2017 Wiley Periodicals, Inc.     

定标粒子理论在动力学介质效应上的应用

应用定标粒子溶液理论,导出了动力学介质效应公式,分析计算了乙酸乙酯皂化反应的介质效应,并与本文实验值相比较,结果,规律一致,数值相近。溶剂体系为水-乙醇和水-二甲亚砜。由于反应体系中包含有极性分子及离子,故在计算相互作用自由焓时,对定标粒子理论作适当补充,包括了色散能、诱导能、取向能和静电作用能。     

Dual‐parameter correlations on rate of an aromatic nucleophilic substitution reaction in aqueous solutions of methanol,ethanol, and propan‐2‐ol

Reaction kinetics of 1‐chloro‐2,4‐dinitrobenzene with piperidine was studied spectrophotometrically in aqueous solutions of methanol, ethanol, and propan‐2‐ol at 25°C. The reaction in these solutions is not catalyzed by piperidine. The plots of second‐order rate constants of the reaction vs. mole fraction of water show maxima in the all‐aqueous solutions. Single‐parameter correlations of log k₂ vs. π* (dipolarity/polarizability), α (hydrogen‐bond donor acidity), and E_T^N (normalized polarity parameter) are very poor in the all solutions (for example, in aqueous solutions of ethanol, regression coefficients are 0.814, 0.113, and 0.486, respectively). Dual‐parameter correlations of log k₂ vs. π* and α in all cases represent significant improvement with regard to the single‐parameter models (in aqueous solutions of ethanol: n = 11, r = 0.980, and s = 0.034). Dipolarity/polarizability and hydrogen‐bond donor acidity (HBD) of media have opposite effects on the reaction rate. The activated complex leading to the zwitterionic intermediate is expected to be favored by increasing the solvent dipolarity/polarizability parameter. Increasing the hydrogen‐bond donor acidity of solvent stabilizes piperidine and hence the reaction rate decreases. A dual‐parameter equation of log k₂ vs. π* and α was obtained in the all‐aqueous solutions (n = 31, r = 0.956, s = 0.055) in which π* and α have approximately equal and opposite effects on the reaction rate. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 118–123, 2001     

A linear solvation energy relationship study for the reactivity of 2‐(4‐substituted phenyl)‐cyclohex‐1‐enecarboxylic, 2‐(4‐substituted phenyl)‐benzoic,and 2‐(4‐substituted phenyl)‐acrylic acids with diazodiphenylmethane in various solvents

The reactivities of 2‐(4‐substituted phenyl)‐cyclohex‐1‐enecarboxylic acids, 2‐(4‐substituted phenyl)‐benzoic acids, and 2‐(4‐substituted phenyl)‐acrylic acids with diazodiphenylmethane in various solvents were investigated. To explain the kinetic results through solvent effects, the second‐order rate constants of the examined acids were correlated using the Kamlet–Taft solvatochromic equation. The correlations of the kinetic data were carried out by means of multiple linear regression analysis, and the solvent effects on the reaction rates were analyzed in terms of initial and transition state contributions. The signs of the equation coefficients support the proposed reaction mechanism. The solvation models for all investigated carboxylic acids are suggested. The quantitative relationship between the molecular structure and the chemical reactivity is discussed, as well as the effect of geometry on the reactivity of the examined molecules. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 430–439, 2010     

Normal‐phase high‐performance counter‐current chromatography for the fractionation of dissolved organic matter from a freshwater source

Normal‐phase high‐performance counter‐current chromatography (HPCCC) is used to obtain a preliminary fractionation of components in dissolved organic matter (DOM) from a freshwater source. The HPCCC solvent system involved a normal‐phase approach with water/methanol (1:1) as the lower stationary phase and hexane/ethyl acetate (1:1) as the upper mobile phase. The critical experiment parameters were optimised: revolution speed 1800 rpm and flow rate 0.15 mL/min. Under these conditions 50 μL of a 0.50 mg/mL DOM solution was loaded. The detection wavelength was monitored at 330 nm in order to isolate the main portion of DOM, which includes substances such as carboxyl‐rich alicyclic molecules. By optimising this system it was possible to isolate materials that, according to GC–MS, can be related to molecules with an analogous structural background. Where fraction analysis was not suitable for GC–MS, RP‐HPLC with UV absorbance detection was used, showing unique chromatograms for each fraction at both 210 and 330 nm.     

Separation and purification of hydrolyzable tannin from Geranium wilfordii Maxim by reversed‐phase and normal‐phase high‐speed counter‐current chromatography

Three hydrolyzable tannins, geraniin, corilagin and gallic acid, main active components of Geranium wilfordii Maxim, have been separated and purified in one‐step by both reversed‐phase and normal‐phase high‐speed counter‐current chromatography. Gallic acid, corilagin and geraniin were purified from 70% aqueous acetone extract of G. wilfordii Maxim with solvent system n‐hexane–ethyl acetate–methanol–acetic acid–water (1:10:0.2:0.2:20) by reversed‐phase high‐speed counter‐current chromatography at purities of 94.2, 91.0 and 91.3%, at yields of 89.3, 82.9 and 91.7%, respectively. Gallic acid, corilagin and geraniin were purified with solvent system n‐hexane–ethyl acetate–methanol–acetic acid–water (0.2:10:2:1:5) by normal‐phase high‐speed counter‐current chromatography at purities of 85.9, 92.2 and 87.6%, at yields of 87.4, 94.6 and 94.3%, respectively. It was successful for both reversed‐phase and normal‐phase high‐speed counter‐current chromatography to separate high‐polarity of low‐molecular‐weight substances.     

Solvent‐free three‐component synthesis of 7‐aryl‐1,1‐dioxothieno[3,2‐b]pyran derivatives catalyzed by ammonium acetate

An efficient synthesis of 7‐aryl‐1,1‐dioxothieno[3,2‐b]pyran derivatives via the reaction of aryl aldehyde, tetrahydrothiophene‐3‐one‐1,1‐dioxide and malononitrile or ethyl 2‐cyanoacetate was performed at room temperature catalyzed by ammonium acetate under solvent‐free conditions. Compared with the conventional methods, this protocol features mild reaction conditions, high yields, and eco‐friendliness. J. Heterocyclic Chem., (2011).     

Spectral Investigations of Preferential Solvation and Solute–Solvent Interactions of Free Base and Protonated 5,10,15,20-Tetrakis(4-trimethyl-ammonio-phenyl)-porphine Tetratosylate in Aqueous Organic Mixed Solvents

The solvatochromic properties of the free base and the protonated 5,10,15,20-tetrakis(4-trimethyl-ammonio-phenyl)-porphine tetratosylate (TTMAPP) were studied in pure water, methanol, ethanol, 2-propanol, and their corresponding aqueous mixtures. The correlation of the empirical solvent polarity scale (E _T) values of TTMAPP with composition of the solvents were analyzed by the solvent exchange model of Bosch and Roses to clarify the preferential solvation of the probe dyes in the binary mixed solvents. The solvation shell composition effects in preferential solvation of the solute dyes were investigated in terms of both solvent–solvent and solute–solvent interactions and also the local mole fraction of each solvent composition was calculated in the cybotactic region of the probe. The effective mole fraction variation may provide significant physicochemical insights in the microscopic and molecular level of interactions between TTMAPP species and the solvent components and, therefore, can be used to interpret the solvent effect on kinetics and thermodynamics of TTMAPP.     

Kinetic studies on saponification of ethyl acetate using an innovative conductivity‐monitoring instrument with a pulsating sensor

An innovative conductometric measurement technique using a nonconventional but high‐performance (high‐precision, high‐resolution, rapid response features for online graphic display) in house–built pulsating conductivity monitoring instrument has been deployed to study the kinetic behavior during the reaction of ethyl acetate and NaOH. A laboratory‐made constant temperature reaction bath with the facility of continuous stirring of solution for homogeneous mixing was used to carry out experiments at desired solution temperatures. Rate constants of the saponification reaction in the temperature range at various temperatures (30–55°C) were determined, and the results were compared with the reported values. Although the reported data exhibit wide scatter, our data are in agreement with some of the literature data. From these data, thermodynamic parameters such as activation energy, activation enthalpy, activation entropy, and activation free energy have been evaluated. With the introduction of this novel conductometric measurement technique, the determination of rate constants at various solution temperatures becomes much simpler and faster. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 648–656, 2011     

Extension of solution‐reaction‐surface description to examination of nonequilibrium solvation effect for microsolvated reaction

A microscopic method to examine a nonequilibrium solvation effect is reported. The solution reaction is simplified as a barrier‐crossing reaction within a solution reaction surface that corresponds to a two‐dimensional space determined by solute and solvent reactive coordinates. For this simplification, the motions within the space spanned by nonreactive coordinates are frozen. We derive three rate constant expressions: (1) in the nonadiabatic solvation limit, (2) in the equilibrium solvation limit, and (3) of the transition‐state theory. This method was applied to the examination of the contact‐ion‐pair formation of t‐BuCl in four waters. We found that the nonadiabatic solvation picture overestimates the nonequilibrium solvation effect. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 77: 791–796, 2000     

Surface plasmon resonance as a probe of interactions between a thin‐film gold electrode and an aqueous supporting electrolyte containing 1‐ethyl‐3‐methyl‐imidazolium ethyl sulfate ionic liquid

Surface plasmon resonance (SPR) and electrochemical measurements are combined in this work to study the interactions of a gold film electrode with aqueous electrolytes of an ionic liquid (IL), 1‐ethyl‐3‐methyl‐imidazolium ethyl sulfate. The optical response of the bulk electrolyte strongly affects the SPR angles, and the critical angle data help to separate these bulk effects from those arising strictly from the electrode surface. The optical parameters of the Au‐electrolyte system are determined by fitting the SPR angle‐spectra to calculated results of a multilayer reflectivity model. Both in the absence and in the presence of externally applied voltages, the SPR signal of the experimental interface is dominated by the dielectric behavior of the bulk electrolyte. No significant chemisorptions are detected for the IL contents (0.036–0.087 mole fraction) of the electrolytes used. The results demonstrate how angle resolved SPR measurements can be employed to determine the suitability of specific ILs as solutes for aqueous background electrolytes in electrochemical SPR sensing experiments. Copyright © 2011 John Wiley & Sons, Ltd.     

Kinetics of Carbon Dioxide Reaction with Aqueous Mixture of Piperazine and 2‐Amino‐2‐ethyl‐1,3‐propanediol

Current researchers from environmental and industrial fields are focusing on advanced means of carbon dioxide (CO₂) capture to limit its consequences in process industries. They also intend to enhance the mitigation of environmental impart by CO₂ especially its greenhouse effect. In this study, the kinetics of CO₂ reaction with an aqueous blend of piperazine (PZ) and 2‐amino‐2‐ethyl‐1,3‐propanediol (AEPD) were investigated. It was found that blending of AEPD with a little percentage of PZ generated the observed rate constant, k_o, values that were more than twice the direct summation of the k_o values of the aqueous pure amines at the corresponding concentration and temperature. The kinetic study of the system was modeled using a termolecular mechanism. Blending 0.05 kmol/m³ of PZ with 0.5 kmol/m³ of AEPD gives an observed rate constant k_o value of 2397.9 s^?1 at 298 K. This result is comparable to rate constants of other amine mixtures. Thus, the aqueous blend of AEPD with PZ is an attractive solvent for CO₂ capture that has good advantages. The PZ that serves as the promoter in the reaction is needed in small fraction, whereas AEPD, which is a sterically hindered amine, increases CO₂ absorption capacity of the system. AEPD can be produced from renewable materials. © 2013 Wiley Periodicals, Inc. Int J Chem Kinet 45: 161–167, 2013     

Preferential solvation of indomethacin and naproxen in ethyl acetate + ethanol mixtures according to the IKBI method

The preferential solvation parameters of indomethacin and naproxen in ethyl acetate + ethanol mixtures are derived from their thermodynamic properties by using the inverse Kirkwood–Buff integrals method. It is found that both drugs are sensitive to solvation effects, so the preferential solvation parameter, δx_EA,D, is negative in ethanol-rich and ethyl acetate-rich mixtures but positive in compositions from 0.36 to 0.71 in mole fraction of ethyl acetate. It is conjecturable that in ethanol-rich mixtures, the acidic interaction of ethanol on basic sites of the analgesics plays a relevant role in the solvation. The more solvation by ethyl acetate in mixtures of similar co-solvent compositions could be due to polarity effects. Finally, the slight preference of these compounds for ethanol in ethyl acetate-rich mixtures could be explained as the common participation of basic sites in both solvents and the acidic site of ethanol. Nevertheless, the specific solute–solvent interactions remain unclear.