Vapor‐Based Synthesis of Poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] and Its Use for Biomimetic Surface Modifications

Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.

     

Novel Biopolymer Matrices for Microencapsulation of Phages: Enhanced Protection Against Acidity and Protease Activity

Phage therapy by oral administration requires enhanced resistance of phages to the harsh gastric conditions. The aim of this work is the microencapsulation of phages in natural biopolymeric matrices as a protective barrier against the gastric environment. Alginate and pectin are used as base polymers. Further emulsification with oleic acid or coating with a different biopolymer is also studied. Emulsified pectin shows the maximum encapsulation efficiency and the highest protection against acidity, leaving more than 10³ active phages after 30 min exposure at pH = 1.6, and protects phage from pepsin activity (4.2 mg mL^?1). Non‐encapsulated phages are fully inactivated at pH = 1.6 or with pepsin (0.5 mg mL^?1) after 10 min.

     

Facile Synthesis of Self‐Assembled Polyaniline Nanodisks

Polyaniline nanodisks have been synthesized successfully by the chemical oxidation polymerization of aniline by a self‐assembly process without the use of any acid. The thickness and lateral dimensions of the polyaniline nanodisks are in the range of 20–30 nm and 1–2 µm, respectively. The influence of synthetic parameters, such as the concentration of ammonium peroxydisulfate and pH, on the morphologies of polyaniline nanostructures have been investigated.

     

Prediction of Polymer Properties from their Structure by Recursive Neural Networks

Summary: We propose a new approach for predicting polymer properties from structured molecular representations based on recursive neural networks. To this aim, a structured representation is designed for the modeling of polymer structures. This representation can also account for average macromolecule characteristics. Preliminarily, this model is applied to the calculation of the T_g of (meth)acrylic polymers with different stereoregularity.

Representation of poly(methyl methacrylate) as a chemical tree and unfolding of the encoding process through its structure.     

Ethylene and Ethylene/Propylene Polymerization Behavior of Bis(phenoxy‐imine) Zr and Hf Complexes with Perfluorophenyl Substituents

The catalytic properties of bis(phenoxy‐imine) Zr and Hf complexes incorporating perfluorophenyl groups with methylaluminoxane were investigated. The fluorinated complexes produced far higher‐molecular‐weight polyethylenes and ethylene/propylene copolymers with increased activities compared with the non‐fluorinated congeners. Moreover, the fluorinated complexes displayed a higher incorporation ability for propylene.

Structures of complexes 1 – 4 .     

A Rapid Quenched‐Flow Device for the Characterisation of the Nascent Polymerisation of Ethylene under Industrial Conditions

Summary: A quenched‐flow reactor is introduced as an effective means for the production of polyolefin particles with precisely controlled reaction times as low as 40 ms. The use of off‐line scanning electron microscopy and induced‐coupled plasma yields experimental data on the development of the kinetics and morphology of nascent structures during the polymerisation of ethylene on a heterogeneous TiCl₄ MgCl₂ Ziegler–Natta catalyst. Initial ex situ observations revealed the development of specific morphologies very early during the reaction (e.g., cracks in platelike surfaces, fines, extrudates, etc.) that can potentially lead to fines, and the kinetic analysis showed extremely high reaction rates at very short times.

Scanning electron micrograph of a network of fibrils formed by the deformation of the surface of a particle due to the generation of internal forces.     

Polyaniline Microspheres Consisting of Highly Crystallized Nanorods

The preparation of self‐assembled polyaniline (PANi) microspheres via facile interfacial oxidation polymerization of aniline in the presence of DL ‐tartaric acid dopant is reported. Compared with PANis reported in the literature, the PANi prepared in this study exhibits a nanorod‐bundle morphology with exceptionally high crystallinity. These nanorods or nanorod bundles can self‐assemble into microspheres with unique alignment. The chemistry, morphology, and crystal structure of DL ‐tartaric acid doped microspheres were studied using SEM, TEM, SAED, XRD, and FTIR.

     

A Water‐Soluble π‐Conjugated Polymer with up to 100 mg · mL−1 Solubility

A cationic water‐soluble polyfluorene (P2) containing a high density of tetraalkylammonium side chains in polymer backbone was synthesized and characterized. The polymer shows excellent water solubility up to 100 mg · mL⁻¹ as well as high photoluminescence (PL) quantum yield of 44% in water. The relatively high cationic density and appropriate side chain length of the polymer are the key factors to achieve such high water solubility. The reduction potential of P2 is decreased as compared with its neutral polymer, reflecting the enhanced electron injection abilities. The standard NPB/Alq₃ device using such a polymer as the electron injection layer shows nearly three‐fold enhancement in the electroluminescence (EL) efficiency.

     

Electromagnetic Activation of Shape Memory Polymer Networks Containing Magnetic Nanoparticles

Summary: By incorporation of surface‐modified superparamagnetic nanoparticles into shape memory polymer matrices, remote actuation of complex shape transitions by electromagnetic fields is possible. The composite thermosets of oligo(ε‐caprolactone)dimethacrylate/butyl acrylate contain between 2 and 12 wt.‐% magnetite nanoparticles serving as nanoantennas for magnetic heating. It is shown that the particles are dispersed homogenously within the matrix and that the basic thermal and mechanical properties of the polymer matrix are maintained. The specific loss power of the particles is determined to be 30 W · g⁻¹ at 300 kHz and 5.0 W. During the shape transition at 43 °C, no further temperature increase is observed.

     

Nitroxide‐Mediated Polymerization of Styrene in a Continuous Tubular Reactor

Summary: Nitroxide‐mediated polymerization of styrene in a continuous tubular reactor has been demonstrated for the first time. The polymerization kinetics in the tubular reactor are similar to those in a batch reactor. The number average molecular weight increases linearly with conversion, and chain extension experiments were successful, indicating that the living nature of the polymerization is maintained in the tubular reactor.

Evolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor.     

Direct Melt Intercalation of Polylactide Chains into Nano‐Galleries: Interlayer Expansion and Nano‐Composite Structure

Summary: The polylactide‐based nano‐composites were prepared via melt extrusion method using different types of intercalants and nano‐fillers having different surface charge density. In order to understand the direct polymer melt intercalation into the nano‐galleries, the interdigitated layer structure of the organically modified layered filler (OMLF), where the intercalants are oriented with some inclination to the host layer in the interlayer space, was proposed. After polymer melt intercalation, the smaller initial interlayer opening led to the larger interlayer expansion, suggesting the large amount of the intercalation of the polymer chains. Consequently, the nano‐composite exhibited finer dispersion of the nano‐fillers when compared with the nano‐composites prepared from OMLFs with larger initial interlayer opening.

Illustration of a model of interlayer structure of the qC₁₄(OH) in gallery space of HTO.     

Poly(ethylene terephthalate) Nanofibers Made by Sea–Island‐Type Conjugated Melt Spinning and Laser‐Heated Flow Drawing

Nylon‐6/poly(ethylene terephthalate) (PET) ultra‐multi‐island sea–island conjugated melt‐spun fibers are flow‐drawn at a draw ratio of 174 with heating by CO₂ laser irradiation. Continuous PET nanofibers that have a diameter of 39 nm could be obtained from the flow‐drawn fiber with further drawing and removal of the sea component. In addition, the drawn fiber has a strength of 0.54 GPa. This result shows that a PET nanofiber having a strength almost equal to that of a conventional PET fiber can be obtained by the combination of conjugate‐melt‐spinning and laser‐heated flow‐drawing.

     

Regioregular Poly(3‐hexylthiophene) in a Novel Conducting Amphiphilic Block Copolymer

Regioregular poly(3‐hexylthiophene) has been successfully incorporated into a novel amphiphilic block copolymer. The amphiphilic nature of poly(3‐hexylthiophene)‐block‐poly(acrylic acid) has been investigated using spectroscopic methods and has yielded solvatochromic behavior in several solvents of varying polarity. Evidence suggests that a supramolecular, long range ordering of block copolymer occurs in polar solvents, resulting in the formation of aggregates. Despite relatively large amounts of non‐conductive blocks, the poly(3‐hexylthiophene) diblock copolymer yields a high conductivity of 1 S · cm⁻¹, and atomic force microscopy shows the formation of a highly organized nanofibrilar morphology in the solid state.

     

Stereoselective Cyclopolymerization of Polar 1,6‐Heptadiynes by Novel,Tailor‐Made Ruthenium‐Based Metathesis Catalysts

Summary: The cyclopolymerization of 4,4‐bis(hydroxymethyl)‐1,6‐heptadiyne ( M1 ), 4‐(carboxyethyl)‐1,6‐heptadiyne ( M2 ), 4‐(hydroxymethyl)‐1,6‐heptadiyne ( M3 ), and 4‐carboxy‐1,6‐heptadiyne ( M4 ) using five different well‐defined metathesis initiators was investigated. Control of molar mass was achieved with catalysts bearing trifluoroacetate ligands. ¹³C NMR experiments showed that poly‐ M2 , prepared by the action of any catalyst consisted solely of five‐membered ring structures, i.e., 1,2‐(cyclopent‐1‐enylene)vinylene units. Effective conjugation lengths of all polymers were calculated from the corresponding UV‐Vis absorption maxima, which varied reversibly with temperature.

     

Heterogeneous ‘Organoclick’ Derivatization of Polysaccharides

Summary: A simple method for the direct catalytic heterogeneous modification of polysaccharides is presented. The novel method is exemplified by the combination of organic acid‐catalyzed esterification and copper‐catalyzed Huisgen reaction (click chemistry) to attach a fluorescent probe to solid cellulose. The heterogeneous ‘organoclick’ derivatization of cellulose allows for a mild, highly modular surface modification of cellulose under environmentally benign reaction conditions.

Schematic of the combined organic acid‐catalyzed esterification and copper‐catalyzed Huisgen reaction (click chemistry) to modify a polysaccharide with a fluorescent probe.     

Preparation of Clickable Poly(3‐hydroxyalkanoate) (PHA): Application to Poly(ethylene glycol) (PEG) Graft Copolymers Synthesis

A new synthesis of amphiphilic biodegradable copolymers consisting of hydrophobic poly(3‐hydroxyalkanoate) (PHA) backbone and hydrophilic poly(ethylene glycol) (PEG) units as side chains is described. Poly[(3‐hydroxyoctanoate)‐co‐(3‐hydroxyundecenoate)] (PHOU) was first methanolyzed and its unsaturated side chains were quantitatively oxidized to carboxylic acid. Esterification with propargyl alcohol led to an alkyne‐containing “clickable” PHA in 71% conversion. Its reactivity was successfully demonstrated by grafting azide‐terminated PEG chains of 550 and 5 000 g · mol⁻¹, respectively. All products were fully characterized using GPC, ¹H, and COSY NMR.

     

Photodissociation Rate Constants of New Light Sensitive Alkoxyamines

The photochemical properties of two new photocleavable alkoxyamines bearing a benzophenone‐derived chromophore were studied by electron spin resonance (ESR). The C O bond cleavage has been demonstrated and the photolysis rate constants (k_d) determined over a large range of light intensity through the monitoring of the nitroxide concentration in aerated conditions. The obtained kinetic data highlight for the first time the linear dependence of k_d on the light intensity for alkoxyamines: this should be a driving factor for nitroxide mediated radical photopolymerization (NMP²).