Synthesis of 15‐Cyano‐12‐oxopentadecano‐15‐lactone and 15‐Cyano‐ 12‐oxopentadecano‐15‐lactam

15‐Cyano‐12‐oxopentadecano‐15‐lactone was synthesized in 59% total yield starting from 2‐nitrocyclododecanone by Michael addition to acrylaldehyde, followed by reaction with trimethylsilylcyanide, hydrolysis, ring‐expansion, and Nef reaction. A two‐step, one‐pot synthesis of intermediate 2‐hydroxy‐4‐(1‐nitro‐2‐oxycyclododecyl)butanenitrile from 3‐(1‐nitro‐2‐oxocyclododecyl)propanal was developed and the conditions for the Nef reaction were studied. 15‐Cyano‐12‐oxopentadecano‐15‐lactam was synthesized in 40% total yield starting from 2‐nitrocyclododecanone by Michael addition to acrylaldehyde, followed by Strecker reaction, ring‐expansion, and Nef reaction. The conditions for the Strecker and Nef reactions were studied. The structures of the target compounds, intermediates, and by‐product were characterized by IR, ¹H‐ and ¹³C‐NMR, and elemental analysis or MS.     

Preparation of 2‐phenyl‐2‐hydroxymethyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline and 2‐methyl‐4‐oxo‐3,4‐dihydroquinazoline derivatives formation

The cyclization of phenacyl anthranilate has been studied with the aim to develop the synthesis of 2‐(2′‐aminophenyl)‐4‐phenyloxazole. However, a different course of the reaction than expected was observed. 2‐Phenyl‐2‐hydroxymethyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 3a ) was formed by the reaction of phenacyl anthranilate ( 2 ) with ammonium acetate under various conditions. 3‐Hydroxy‐2‐phenyl‐4(1H)‐quinolinone ( 4 ) arose by heating compound 3a in acetic acid. The same compound was obtained by melting compound 3a , but the yield was lower. Different types of products resulted in the reaction of compound 3a with acetic anhydride. Under mild conditions acetylated products 2‐acetoxymethyl‐2‐phenyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 7a ) and 2‐acetoxymethyl‐3‐acetyl‐2‐phenyl‐4‐oxo‐1,2,3,4‐tetrahydroquinazoline ( 8 ) were prepared. If the reaction was carried out under reflux of the reaction mixture, molecular rearrangement took place to give cis and trans 2‐methyl‐4‐oxo‐3‐(1‐phenyl‐2‐acetoxy)vinyl‐3,4‐dihydroquinazolines ( 9a and 9b ). All prepared compounds have been characterised by their ¹H, ¹³C and ¹⁵N NMR spectra, IR spectra and MS.     

Cross‐Linked‐Polymer‐Supported N‐{2′‐[(Arylsulfonyl)amino][1,1′‐binaphthalen]‐2‐yl}prolinamide as Organocatalyst for the Direct Aldol Intermolecular Reaction under Solvent‐Free Conditions

A bottom‐up strategy was used for the synthesis of cross‐linked copolymers containing the organocatalyst N‐{(1R)‐2′‐{[(4‐ethylphenyl)sulfonyl]amino}[1,1′‐binaphthalen]‐2‐yl}‐D ‐prolinamide derived from 2 (Scheme 1). The polymer‐bound catalyst 5b containing 1% of divinylbenzene as cross‐linker showed higher catalyst activity in the aldol reaction between cyclohexanone and 4‐nitrobenzaldehyde than 5a and 5c . Remarkably, the reaction in the presence of 5b was carried out under solvent‐free, mild conditions, achieving up to 93% ee (Table 1). The polymer‐bound catalyst 5b was recovered by filtration and re‐used up to seven times without detrimental effects on the achieved diastereo‐ and enantioselectivities (Table 2). The catalytic procedure with polymer 5b was extended to the aldol reaction under solvent‐free conditions of other ketones, including functionalized ones, and different aromatic aldehydes (Table 3). In some cases, the addition of a small amount of H₂O was required to give the best results (up to 95% ee). Under these reaction conditions, the cross‐aldol reaction between aldehydes proceeded in moderate yield and diastereo‐ and enantioselectivity (Scheme 2).     

Synthesis of 5‐aryl and 5‐amidocamptothecins

A variety of 5‐aryl‐(20S)‐camptothecin derivatives were synthesized by the reaction of 5‐hydroxy‐(20S)‐camptothecin with aromatic hydrocarbons under Friedel‐Craft reaction conditions in moderate to good yield as diastereomeric pairs. The methodology was then extended for the synthesis of 5‐amido‐(20S)‐camptothecin derivatives by reacting 5‐hydroxy‐(20S)‐camptothecin with alkyl and aryl nitriles under Ritter type reaction conditions. The reaction is presumed to proceed through an iminium ion intermediate under Friedel Craft and Ritter type reaction condition, which is further trapped by nucleophile present in the reaction medium. J. Heterocyclic Chem., 00 , 00 (2011).     

Heterocyclization reaction of 2‐(2‐methylaziridin‐1‐yl)‐3‐ureidopyridines under appel's conditions

The reaction of 2‐(2‐methylaziridin‐1‐yl)‐3‐ureidopyridines 12 with triphenylphosphine, carbon tetra‐chloride, and triethylamine (Appel's conditions) led to the corresponding carbodiimides 13 , which underwent intramolecular cycloaddition reaction with aziridine under the reaction conditions to give the pyridine‐fused heterocycles, 2,3‐dihydro‐1H‐imidazo[2′,3′:2,3]imidazo[4,5‐b]pyridines 16 and 12,13‐dihydro‐5H‐1,3 ‐benzodiazepino [2′,3′:2,3] imidazo[4,5‐b]pyridines 17 .     

Metallation reactions. XXXIV. Synthesis of 2‐(1‐hydroxy‐1‐arylethyl)‐1,3‐benzoxathiol‐3‐oxide derivatives

The reaction of benzoxathiole‐3‐oxide with lithiumdiisopropylamide in tetrahydrofuran gave an anion, which was reacted with various aryl‐methyl‐ketones to give 2‐(1‐hydroxy‐1‐arylethyl)‐1,3‐benzoxathiol‐3‐oxide derivatives. The reaction was carried out in different temperature conditions: at ‐88 °C the trans addition stereoisomers to the sulfoxide oxygen atom were the main products.     

New trans/cis tetrahydroisoquinolines. 2. trans‐ and cis‐3‐(1‐methyl‐1h‐pyrrol‐2‐yl)‐1‐(2H)‐oxo‐2‐phenethyl‐1,2,3,4‐tetrahydroisoquino‐lin‐4‐carboxylic acids and subsequent transformations

Stereochemical course of the reaction of homophthalic anhydride and N‐(1‐methyl‐1H‐pyrrol‐2‐yl‐methylidene)‐phenethylamine was studied. Mixtures of the expected trans‐ and cis‐1,2,3,4‐tetrahydroiso‐quinoline‐4‐carboxylic acids trans‐ 4 and cis‐ 4 were obtained along with by‐products 5 and 6 . The ratios of all products and the diastereomers, obtained under different reaction conditions, were established by pmr. THF as a solvent and ultrasonic treatment are applied for the first time in the reaction of this type. The reaction was made diastereoselective towards any isomer. The carboxylic group of trans‐ 4 was transformed in four steps into various cyclic amino‐methyl groups yielding numerous new tetrahydroisoquinolinones trans‐ 10a‐i incorporating a given fragment of pharmacological interest. Reduction of 10a‐i was studied.     

Reactivity of 2‐Methyl‐4H‐3,1‐benzoxazin‐4‐ones and 2‐Methyl‐4H‐pyrido[2,3‐d][1,3]oxazin‐4‐one under Microwave Irradiation Conditions

The reactivity of variably substituted 2‐methyl‐4H‐3,1‐benzoxazin‐4‐ones and 2‐methyl‐4H‐pyrido[2,3‐d][1,3]oxazin‐4‐one towards carbon and oxygen nucleophiles under microwave irradiation conditions was investigated. Optimization of the reaction conditions of oxazinones with carbon nucleophiles led to the synthesis of a series of 4‐hydroxy‐quinolin‐2‐ones and 4‐hydroxy‐1,8‐naphthyridin‐2‐ones in high yields, whereas reaction with a variety of alcohols proceeded smoothly to the formation of the corresponding N‐acetyl‐anthranilates and nicotinates.     

An Efficient Synthesis of 3‐(3‐benzyl‐2‐(phenylimino)‐2,3‐dihydrothiazol‐4‐yl)‐6‐methyl‐4‐(2‐oxo‐2‐phenylethoxy)‐3,4‐dihydro‐2H‐pyran‐2‐one Derivatives via Multi‐Component Approach

An easy, highly efficient and a new convenient one‐pot, two‐step approach to the synthesis of 3‐(3‐benzyl‐2‐(phenylimino)‐2,3‐dihydrothiazol‐4‐yl)‐6‐methyl‐4‐(2‐oxo‐2‐phenylethoxy)‐3,4‐dihydro‐2H‐pyran‐2‐one is described. These compounds were synthesized from 3‐(3‐benzyl‐2‐(phenylimino)‐2,3‐dihydrothiazol‐4‐yl)‐4‐hydroxy‐6‐methyl‐3,4‐dihydro‐2H‐pyran‐2‐one and α‐bromoketones in good yields. The compounds 4 were synthesized by a multi‐component reaction between 1 , 2 , and 3 and the prominent features of this protocol are mild reaction conditions, operation simplicity, and good to high yields of products.     

Synthesis of Dialkyl 2‐(Alkylamino)‐4,9‐dihydro‐9‐oxocyclohepta[b]pyran‐3,4‐dicarboxylates

Dialkyl 2‐(alkylamino)‐4,9‐dihydro‐9‐oxocyclohepta[b]pyran‐3,4‐dicarboxylates are prepared in a one‐pot three‐component reaction of alkyl isocyanide, dialkyl acetylenedicarboxylate, and α‐tropolone (=2‐hydroxycyclohepta‐2,4,6‐trienone). The reaction proceeds smoothly at room temperature and under neutral conditions to afford tropolone derivatives in high yield.     

One‐Pot Synthesis of 4‐(2,3‐Dihydro‐2‐hydroxy‐1,3‐dioxo‐1H‐inden‐2‐yl)‐Substituted 1‐Aryl‐1H‐pyrazole‐3‐carboxylates via a Tandem Three‐Component Reaction

The hitherto unreported, highly functionalized 1H‐pyrazole‐3‐carboxylates 3 have been synthesized in good yields via a one‐pot three‐component domino reaction of phenylhydrazines, dialkyl acetylenedicarboxylates, and ninhydrin under mild conditions for the first time. No co‐catalyst or activator is required for this multicomponent reaction, and the reaction is, from an experimental point of view, simple to perform (Scheme 1). The structures of compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization/addition reaction is proposed (Scheme 2).     

Copper‐catalyzed Synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde by Step‐wise and One‐pot Three‐component Huisgen's 1,3‐dipolar Cycloaddition Reaction

An efficient method for the synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde has been developed starting from oxindole and indole using Huisgen's 1,3‐dipolar cycloaddition reaction of organic azides to alkynes. The effect of catalysts and solvent on these reactions has been investigated. Among all these conditions, while using CuSO₄·5H₂O, DMF was found to be the best system for this reaction. It could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of halides, azides, and alkynes. The Huisgen's 1,3‐dipolar cycloaddition reaction was performed using CuSO₄·5H₂O in DMF with easy work‐up procedure.     

Tandem Hydroformylation/Reductive Amination of 3‐Allyl‐2‐methylquinazolin‐4(3H)‐one

The 3‐allyl‐2‐methylquinazolin‐4(3H)‐one ( 1 ), a model functionalized terminal olefin, was submitted to hydroformylation and reductive amination under optimized reaction conditions. The catalytic carbonylation of 1 in the presence of Rh catalysts complexed with phosphorus ligands under different reaction conditions afforded a mixture of 2‐methyl‐4‐oxoquinazoline‐3(4H)‐butanal ( 2 ) and α,2‐dimethyl‐4‐oxoquinazoline‐3(4H)‐propanal ( 3 ) as products of ‘linear’ and ‘branched’ hydroformylation, respectively (Scheme 2). The hydroaminomethylation of quinazolinone 1 with arylhydrazine derivatives gave the expected mixture of [(arylhydrazinyl)alkyl]quinazolinones 5 and 6 , besides a small amount of 2 and 3 (Scheme 3). The tandem hydroformylation/reductive amination reaction of 1 with different amines gave the quinazolinone derivatives 7 – 10 . Compound 10 was used to prepare the chalcones 11a and 11b and pyrazoloquinazolinones 12a and 12b (Scheme 4).     

Microwave‐assisted Synthesis of 6‐{(5‐Aryl‐1,3,4‐oxadiazol‐2‐yl)methyl}‐6H‐indolo[2,3‐b]quinoxalines

An efficient and convenient synthesis of a new series of 2‐{(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)methyl}‐5‐aryl‐1,3,4‐oxadiazoles from readily available 1,2‐diaminobenzene and isatins under microwave irradiation conditions was disclosed. The 6‐{(5‐aryl‐1,3,4‐oxadiazol‐2‐yl)methyl}‐6H‐indolo[2,3‐b]quinoxalines were also prepared by the thermal cyclo‐condensation reaction of 2‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)acetohydrazides with carboxylic acids in refluxing POCl₃. The microwave‐assisted synthesis was rapid and resulted in higher yield of the products at lower operating temperature with reduced waste generation in comparison with the thermal reaction protocol.     

Hydrolysis Reaction of N-Phosphoryl-α-, β- and γ-amino Acids Studied by HPLC

The hydrolysis reactions of N-（O,O＇diisopropyl）phosphoryl-L-α-alanine （DIPP-L-α-Ala）, N-（O,O＇diisopropyl）- phosphoryl-D-α-alanine （DIPP-D-α-Ala）, N-（O,O＇-diisopropyl）phosphoryl-β-alanine （DIPP-β-Ala） and N-（O,O＇-diisopropyl）phosphoryl-γ-amino butyric acid （DIPP-γ-Aba）, were studied by HPLC and their hydrolysis reaction kinetic equations were obtained. Under acid conditions, the reaction rate of DIPP-L-α-Ala was close to that of DIPP-D-α-Ala and the same rule was true between DIPP-β-Ala and DIPP-γ-Aba. Meantime, the reaction rate of DIPP-L/D-α-Ala was as 10 times as that of DIPP-β-Ala or DIPP-γ-Aba. Under basic conditions, the hydrolysis reactions of DIPP-β-Ala and DIPP-γ-Aba almost did not take place and the reaction rate of DIPP-L/D-α-Ala was about 1/10 of that under acid conditions. Moreover, theoretical calculation further illuminated the differences of the hydrolysis rate from the view of energy. The results would provide some helpful clues to why nature chose a-amino acids but not other kinds of analogs as protein backbones.     

Gold‐Catalyzed Cyclization of 1‐(Indol‐3‐yl)‐3‐alkyn‐1‐ols: Facile Synthesis of Diversified Carbazoles

Efficient cyclization of 1‐(indol‐3‐yl)‐3‐alkyn‐1‐ols in the presence of a cationic gold(I) complex, leading to annulated or specific substituted carbazoles, was observed. Depending on the reaction conditions and substitution pattern, divergent reaction pathways were discovered, furnishing diversified carbazole structures. Cycloalkyl‐annulated [b]carbazoles are obtained through 1,2‐alkyl migration of the metal‐carbene intermediates; cycloalkyl‐annulated [a]carbazoles are formed through a Wagner–Meerwein‐type 1,2‐alkyl shift; carbazole ethers are constructed through ring‐opening of the cyclopropyl group by nucleophilic attack of water or an alcohol.     

固相β-环糊精包结物诱导7-羟基-2-甲氧基-2-甲基色满的不对称合成

研究了室温下间苯二酚和甲基乙烯基酮分别与β-环糊精（ β-CD）形成包结物后的几种不同固相反应,结果表明包结物A（间苯二酚/β-CD）与包结物B（甲基乙烯基酮/β-CD）反应能够很好地得到目的产物,产率及ee值分别为82.8%和78.4%;间苯二酚与包结物B反应仅得到低光学活性产物（ee值为19.5%）;包结物A与甲基乙烯基酮反应却没有得到手性目的产物。以熔点、X-粉末衍射、固相核磁碳谱及ROESY多种方法对所形成的包结物进行了表征,包结物中主客体的比例（1：1）通过¹H NMR (400 MHz)得以确定,文章对固相环加成反应的机制也进行了初步探讨。     

An Efficient and Facile Synthesis of tert‐Butyl 2‐(Methylamino)‐3‐nitro‐5‐oxo‐4‐aryl‐7,8‐dihydro‐4H‐pyrano[3,2‐c]pyridine‐6(5H)‐carboxylate derivatives in [BMIM]BF4

In this research, we have developed an efficient three‐component reaction for the synthesis of pyrano[3,2‐c]pyridine derivatives from the reaction of aromatic aldehydes, tert‐butyl 2,4‐dioxopiperidine‐1‐carboxylate, and N‐methyl‐1‐(methylthio)‐2‐nitroethylen‐1‐amine in [BMIM]BF₄ medium. The advantages of this method were readily available starting materials, simple reaction conditions, and satisfactory yields.     

Brominated Trihalomethylenones as Versatile Precursors to 3‐Ethoxy, ‐Formyl, ‐Azidomethyl, ‐Triazolyl,and 3‐Aminomethyl Pyrazoles

5‐Bromo[5,5‐dibromo]‐1,1,1‐trihalo‐4‐methoxy‐3‐penten[hexen]‐2‐ones are explored as precursors to the synthesis of 3‐ethoxymethyl‐5‐trifluoromethyl‐1H‐pyrazoles from a cyclocondensation reaction with hydrazine monohydrate in ethanol. 3‐Ethoxymethyl‐carboxyethyl ester pyrazoles were formed as a result of a substitution reaction of bromine and chlorine by ethanol. The dibrominated precursor furnished 3‐acetal‐pyrazole that was easily hydrolyzed to formyl group. In addition, brominated precursors were used in a nucleophilic substitution reaction with sodium azide to synthesize the 3‐azidomethyl‐5‐ethoxycarbonyl‐1H‐pyrazole from the reaction with hydrazine monohydrate. These products were submitted to a cycloaddition reaction with phenyl acetylene furnishing the 3‐[4(5)‐phenyl‐1,2,3‐triazolyl]5‐ ethoxycarbonyl‐1H‐pyrazoles and to reduction conditions resulting in 3‐aminomethyl‐1H‐pyrazole‐5‐carboxyethyl ester. The products were obtained by a simple methodology and in moderate to good yields.     

Facile and Selective Synthesis of 4‐Methyl‐ and 4‐Phenylthiosemicarbazide (=N‐Methyl‐ and N‐Phenylhydrazinecarbothioamide) Derivatives of Benzil (=1,2‐Diphenylethane‐1,2‐dione)

A selective synthesis of 4‐methylthiosemicarbazide (=N‐methylhydrazinecarbothioamide; 4a ) derivatives by reaction with benzil (=1,2‐diphenylethane‐1,2‐dione; 3 ) is described. The reaction conditions determined the condensation product formed. The most important factor was the acid used: in the presence of conc. HCl solution, the open‐chain 2 : 1 compound 1a was exclusively obtained, whereas in the presence of 2M HCl, the cyclic 1 : 1 condensation product 2a was formed. The alcohol used, the presence of H₂O, and the time of heating were additional crucial factors. The new cyclic compound 2a with a MeO group was exclusively formed when working under high‐dilution conditions. The reaction with the 4‐phenyl derivative 4b gave new cyclic compounds as the major products under all conditions used (Scheme).