An Efficient Synthesis of 2-Oxazolidinones by Palladium-catalyzed Oxidative Carbonylation of β-Aminoalcohols and 2-Aminophenol under Mild Conditions

Oxidative carbonylation of β-aminoalcohols and 2-aminophenol in Pd(OAc)2/I2 catalytic system to produce the corresponding 2-oxazolidinones was conducted with high yields and selectivities in short reaction time. Mild reaction conditions, high catalytic turnover frequency value, improved yields and selectivities are the remarkable features exhibited by this process.     

An acetatopalladium(II) complex with 1‐benzyl‐N‐(3,5‐di‐tert‐butylsalicylidene)piperidin‐4‐amine: Synthesis,structure and catalytic applications in Suzuki–Miyaura coupling of arylboronic acids with hydroxyaryl halides

The Schiff base 1‐benzyl‐N ‐(3,5‐di‐tert ‐butylsalicylidene)piperidin‐4‐amine (HL) and its acetatopalladium(II) complex having the formula [Pd(L)(OAc)] were synthesized. Both HL and [Pd(L)(OAc)] were characterized using elemental analysis and various spectroscopic (infrared, UV–visible, ¹H NMR and ¹³C NMR) and mass spectrometric measurements. The molecular structure of the complex was determined using X‐ray crystallographic analysis. In the complex, the pincer‐like NNO‐donor L⁻ and the monodenate OAc⁻ provide a distorted square‐planar N₂O₂ coordination environment around the metal centre. The physicochemical properties and the spectroscopic features of [Pd(L)(OAc)] are consistent with its molecular structure. The complex was found to be an effective catalyst for the Suzuki–Miyaura cross‐coupling reactions of hydroxyaryl halides with arylboronic acids in predominantly aqueous media. The reactions afforded hydroxybiaryl products in good to excellent yields with a wide substrate scope.     

Catalytic and regioselective synthesis of gem‐ or trans‐α,β‐unsaturated amides by carbonylation of alkyl alkynes with aniline derivatives by palladium(II) and phosphine

The reaction of carbonylative addition of alkyl alkynes to aniline derivatives has been successfully achieved by a catalytic system formed of Pd(OAc)₂ and a suitable bidentate phosphine ligand. The reaction led mainly to gem‐α,β‐unsaturated amides ( 3 ) with Pd(OAc)₂/1,3‐bis(diphenylphosphino)propane/p‐toluenesulfonic acid/CO as the catalytic system. However, the reaction catalyzed by Pd(OAc)₂/1,4‐bis(diphenylphosphino)butane/H₂/CO in CH₂Cl₂ as a solvent affords trans‐α,β‐unsaturated amides ( 4 ) as the major product. Copyright © 2003 John Wiley & Sons, Ltd.     

Palladium‐catalyzed cyclization of β‐bromo‐α,β‐unsaturated ketones with arylhydrazines leading to 3‐substituted 1‐aryl‐1 H‐pyrazoles

β‐Bromo‐α,β‐unsaturated ketones are condensed with arylhydrazines to form hydrazones, which are in situ intramolecularly cyclized into 3‐substituted 1‐aryl‐1 H‐pyrazoles under a catalytic system of Pd(OAc)₂/1,3‐bis(diphenylhosphino)propane (dppp)/NaO^tBu. Copyright © 2012 John Wiley & Sons, Ltd.     

Convenient Synthesis of 1H‐Indol‐1‐yl Boronates via Palladium(0)‐Catalyzed Borylation of Bromo‐1H‐indoles with ‘Pinacolborane’

An atom‐economic Pd⁰‐catalyzed synthesis of a series of pinacol‐type indolylboronates 3 from the corresponding bromoindole substrates 2 and pinacolborane (pinBH) as borylating agent was elaborated. The optimal catalyst system consisted of a 1 : 2 mixture of [Pd(OAc)₂] and the ortho‐substituted biphenylphosphine ligand L‐3 (Scheme 4, Table). Our synthetic protocol was applied to the fast, preparative‐scale synthesis of 1‐substituted indolylboronates 3a – h in the presence of different functional groups, and at a catalyst load of only 1 mol‐% of Pd.     

Synthesis of (−)‐Erythrodiene and (+)‐7‐Epispirojatamol via Intramolecular Pd‐Catalyzed Allylzincation

Two spirobicyclic sesquiterpenoids, (−)‐erythrodiene ( 1 ) and (+)‐7‐epispirojatamol ( 30 ), were synthesized in enantiomerically pure form via an intramolecular allylzincation process. The allylzinc species were formed in the presence of Et₂Zn via transmetallation of a catalytically generated allylpalladium intermediate. Several Pd catalysts were tested for this transformation, and [Pd(OAc)₂]/Bu₃P (1 equiv.) was found to be, by far, the most effective. Whereas the preparation of 1 involved allylzincation of a tethered terminal olefin, 30 was formed via a novel intramolecular allyl zincation of a methyl ketone. Both reactions showed the same stereochemical preference, yielding the spirobicyclic products in 95 : 5 and 4 : 1 diastereoisomer ratios, respectively.     

Synthesis of regioregular poly(3‐octylthiophene)s via Suzuki polycondensation and end‐group analysis by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Regioregular poly(3‐octylthiophene)s were synthesized through a palladium‐catalyzed Suzuki polycondensation of 2‐(5‐iodo‐4‐octyl‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane. The effects of the palladium catalyst {tetrakis(triphenylphosphine)palladium(0) [Pd(PPh₃)₄], palladium(II) acetate [Pd(OAc)₂], [1, 1′‐bis(diphenylphosphino)ferrocene]dichloropalladium(II) [Pd(dppf)Cl₂], tris(dibenzylideneacetone)dipalladium(0), or bis(triphenylphosphine)palladium(II) dichloride [Pd(PPh₃)₂Cl₂]} and the reaction conditions (bases and solvents) were investigated. NMR spectroscopy revealed that poly(3‐octylthiophene)s prepared via this route were essentially regioregular. According to size exclusion chromatography, the highest molecular weights were obtained with in situ generated Pd(PPh₃)₄ and tetrakis(tri‐o‐tolylphosphine]palladium(0) {Pd[P(o‐Tol)₃]₄} catalysts or more reactive, phosphine‐free Pd(OAc)₂. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry was used to analyze end groups and allowed the determination of some mechanistic aspects of the Suzuki polycondensation. The polymers were commonly terminated with hydrogen or iodine as a result of deboronation and some deiodination. Pd(PPh₃)₄, Pd(PPh₃)₂Cl₂, and Pd[P(o‐Tol)₃]₄ induced aryl–aryl exchange reactions with the palladium center and resulted in some chains having phenyl‐ and o‐tolyl‐capped chain ends. Pd(dppf)Cl₂ yielded only one type of chain, and it had hydrogen end groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1454–1462, 2005     

Ketenimines from Isocyanides and Allyl Carbonates: Palladium‐Catalyzed Synthesis of β,γ‐Unsaturated Amides and Tetrazoles

The reaction of allyl ethyl carbonates with isocyanides in the presence of a catalytic amount of Pd(OAc)₂ provided ketenimines through β‐hydride elimination of the allyl imidoylpalladium intermediates. The insertion of the isocyanide into the π‐allyl Pd complex proceeded via an unusual η¹‐allyl Pd species. The resulting ketenimines were hydrolyzed to β,γ‐unsaturated carboxamides during purification by flash column chromatography on silica gel or converted in situ into 1,5‐disubstituted tetrazoles by [3+2] cycloaddition with hydrazoic acid or trimethylsilyl azide.     

Cationic palladium complex‐catalyzed carbonylation of 2,3‐dien‐1‐ols to 1,3‐diene‐2‐carboxylic acids and esters under mild conditions

A cationic palladium complex, [Pd(PPh₃)₂(MeCN)₂](BF₄)₂, catalyzed the carbonylation of 2,3‐dien‐1‐ols under mild conditions. The dienols bearing two or more alkyl substituents on the diene part afforded 1,3‐diene‐2‐carboxylic acids successfully in tetrahydrofuran (THF), while those possessing one or no alkyl substituent gave polymers of the products exclusively. The former afforded the corresponding methyl esters in good yields when the reactions were carried out in methanol, while the latter afforded mainly the Diels–Alder reaction products of the resulting esters. An alkylidene group‐substituted π‐allylpalladium species has been presumed to be an intermediate. Copyright © 2000 John Wiley & Sons, Ltd.     

Facile Synthesis and Palladium‐Catalyzed Cross‐Coupling Reactions of 2,3‐Bis(pinacolatoboryl)‐1,3‐butadiene

Treatment of 1,1‐bis(pinacolatoboryl)ethene with an excess of 1‐bromo‐1‐lithioethene gave 2,3‐bis(pinacolatoboryl)‐1,3‐butadiene in high yield. Palladium‐catalyzed cross‐coupling of the resulting diborylbutadiene with aryl iodides took place smoothly in the presence of a catalytic amount of Pd(OAc)₂/PPh₃ and aqueous KOH to give 2,3‐diaryl‐1,3‐butadienes in good yields. The coupling reaction with commercially available 4‐acetoxyphenylmethyl chloride under the same conditions followed by hydrolysis of the acetyl groups gave anolignan B in a one‐pot manner. A variety of [3]‐ to [6]dendralenes were synthesized by palladium‐catalyzed coupling of the diene or 1,1‐bis(pinacolato)borylethene with alkenyl or dienyl halides, respectively, in good yields.     

Palladium‐Catalyzed Aerobic Intermolecular Cyclization of Acrylic Acid with 1‐Octene to Afford α‐Methylene‐γ‐butyrolactones: The Remarkable Effect of Continuous Water Removal from the Reaction Mixture and Analysis of the Reaction by Kinetic,ESI‐MS,and XAFS Measurements

Further study of our aerobic intermolecular cyclization of acrylic acid with 1‐octene to afford α‐methylene‐γ‐butyrolactones, catalyzed by the Pd(OCOCF₃)₂/Cu(OAc)₂ ? H₂O system, has clarified that the accumulation of water generated from oxygen during the reaction causes deactivation of the Cu cocatalyst. This prevents regeneration of the active Pd catalyst and, thus, has a harmful influence on the progress of the cyclization. As a result, both the substrate conversion and product yield are efficiently improved by continuous removal of water from the reaction mixture. Detailed analysis of the kinetic and spectroscopic measurements performed under the condition of continuous water removal demonstrates that the cyclization proceeds in four steps: 1) equilibrium coordination of 1‐octene to the Pd acrylate species, 2) Markovnikov‐type acryloxy palladation of 1‐octene (1,2‐addition), 3) intramolecular carbopalladation, and 4) β‐hydride elimination. Byproduct 2‐acryloxy‐1‐octene is formed by β‐hydride elimination after step 2). These cyclization steps fit the Michaelis–Menten equation well and β‐hydride elimination is considered to be a rate‐limiting step in the formation of the products. Spectroscopic data agree sufficiently with the existence of the intermediates bearing acrylate (Pd? O bond), η³‐C₈H₁₅ (Pd? C bond), or C₁₁H₁₉O₂ (Pd? C bond) moieties on the Pd center as the resting‐state compounds. Furthermore, not only Cu^II, but also Cu^I, species are observed during the reaction time of 2–8 h when the reaction proceeds efficiently. This result suggests that the Cu^II species is partially reduced to the Cu^I species when the active Pd catalytic species are regenerated.     

Palladium‐Catalyzed Direct C2 Arylation of N‐Substituted Indoles with 1‐Aryltriazenes

A novel and efficient palladium‐catalyzed C2 arylation of N‐substituted indoles with 1‐aryltriazenes for the synthesis of 2‐arylindoles was developed. In the presence of BF₃ ? OEt₂ and palladium(II) acetate (Pd(OAc)₂), N‐substituted indoles reacted with 1‐aryltriazenes in N,N‐dimethylacetamide (DMAC) to afford the corresponding aryl–indole‐type products in good to excellent yields.     

Ligand‐free palladium‐catalyzed tandem pathways for the synthesis of 4,4‐diarylbutanones and 4,4‐diaryl‐3‐butenones under microwave conditions

Two efficient Pd‐catalyzed tandem pathways for the synthesis of 4,4‐diaryl‐2‐butanones and 4,4‐diaryl‐3‐buten‐2‐ones were elaborated. The first step in both procedures was the Heck coupling of methyl vinyl ketone (MVK) and various aryl iodides leading to 4‐aryl‐3‐buten‐2‐one with the yield of up to 92% in 1 hr. The second step performed with the same catalyst and a new portion of aryl iodide in the presence K₂CO₃ as a base produced 4,4‐diaryl‐3‐buten‐2‐ones in high yield. Reaction selectivity changed completely to saturated 4,4‐diaryl‐2‐butanones, reductive Heck products, when a tertiary amine was used instead of K₂CO₃. Due to the application of microwave irradiation (MW), the desired products were obtained in high yield in a short time (4 hr), using 0.5 mol% of the Pd (OAc)₂ catalyst without additional ligands.     

Pd(OAc)2@SBA‐15/PrEn nanoreactor: a highly active,reusable and selective phosphine‐free catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous media

A series of ordered mesoporous organic–inorganic hybrid material was designed by using the amine‐functionalized SBA‐15 (PdX₂@SBA‐15/N_Y, Y = 1, 2) as solid support for palladium complexes. Among them, the Pd(OAc)₂/ethylenediamine complex encapsulated into SBA‐15 (Pd(OAc)₂@SBA‐15/PrEn or Pd(OAc)₂@SBA‐15/PrNHEtNH₂) exhibits higher activity and selectivity toward Suzuki cross‐coupling reaction under aerobic conditions and water solvent mixture. The SBA‐15/PrEn supported palladium pre‐catalyst could be separated easily from reaction products and used repetitively several times, showing its superiority over homogeneous catalysts for industrial and chemical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

1‐Ferrocenylmethyl‐3‐(2,4,6‐trimethylbenzyl)‐1H‐imidazolidin‐3‐ium iodide and trans‐bis(3‐benzyl‐1‐ferrocenylmethyl‐1H‐imidazolidin‐2‐ylidene)diiodidopalladium(II)

Owing to increasing interest in the use of N‐heterocyclic carbenes (NHCs) based on imidazolidinium ions as ligands in the design of highly efficient transition‐metal‐based homogeneous catalysts, the characterizations of the 1‐ferrocenylmethyl‐3‐(2,4,6‐trimethylbenzyl)imidazolidin‐3‐ium iodide salt, [Fe(C₅H₅)(C₁₉H₂₄N₂)]I, (I), and the palladium complex trans‐bis(3‐benzyl‐1‐ferrocenylmethyl‐1H‐imidazolidin‐2‐ylidene)diiodidopalladium(II), [Fe₂Pd(C₅H₅)₂(C₁₆H₁₇N₂)₂I₂], (II), are reported. Compound (I) has two iodide anions and two imidazolidinium cations within the asymmetric unit (Z′ = 2). The two cations have distinctly different conformations, with the ferrocene groups orientated exo and endo with respect to the N‐heterocyclic carbene. Weak C—H donor hydrogen bonds to both the iodide anions and the π system of the mesitylene group combine to form two‐dimensional layers perpendicular to the crystallographic c direction. Only one of the formally charged imidazolidinium rings forms a near‐linear hydrogen bond with an iodide anion. Complex (II) shows square‐planar coordination around the Pd^II metal, which is located on an inversion centre (Z′ = 0.5). The ferrocene and benzyl substituents are in a trans–anti arrangement. The Pd—C bond distance between the N‐heterocyclic carbene ligands and the metal atom is 2.036 (7) Å. A survey of related structures shows that the lengthening of the N—C bonds and the closure of the N—C—N angle seen here on metal complexation is typical of similar NHCs and their complexes.     

Palladium‐catalyzed carbonylative cyclization of 3‐bromoallyl alcohols leading to furan‐2(5H)‐ones

3‐Bromoallyl alcohols are carbonylatively cyclized under carbon monoxide pressure in toluene in the presence of a catalytic amount of Pd(OAc)₂ and PPh₃ along with Na₂CO₃ to give furan‐2(5H)‐ones in good yields. Copyright © 2012 John Wiley & Sons, Ltd.     

[5‐Benzyl‐3‐phenyl‐2‐(2‐pyridyl‐κN)thiazolidin‐4‐one‐κS]dichloropalladium(II)

The palladium(II) centre in the title compound, [PdCl₂(C₂₁H₁₈N₂OS)], is coordinated to the pyridyl N atom and to the thia­zolidinone S atom of the 5‐benzyl‐3‐phenyl‐2‐(2‐pyridyl)­thia­zolidin‐4‐one ligand, resulting in a five‐membered chelate ring. Two cis‐chloro ligands complete the square‐planar coordination environment of the metal. Although the geometry at the Pd centre is essentially planar, the N—Pd—S bite angle of 85.20 (8)° causes deviations in the cis angles from the ideal value of 90°. Opposite enantiomers form one‐dimensional chains in the cell via a short S?O intermolecular interaction.     

Synthesis of α‐(Fluorophenyl)pyridine by Palladium‐Catalyzed Cross‐Coupling Reaction

A series of α‐(fluoro‐substituted phenyl)pyridines have been synthesized by means of a palladium‐catalyzed cross‐coupling reaction between fluoro‐substituted phenylboronic acid and 2‐bromopyridine or its derivatives. The reactivities of the phenylboronic acids containing di‐ and tri‐fluoro substituents with α‐pyridyl bromide were investigated in different catalyst systems. Unsuccessful results were observed in the Pd/C and PPh₃ catalyst system due to phenylboronic acid containing electron‐withdrawing F atom(s). For the catalyst system of Pd(OAc)₂/PPh₃, the reactions gave moderate yields of 55% –80%, meanwhile, affording 10% –20% of dimerisation (self‐coupling) by‐products, but trace products were obtained in coupling with 2,4‐difluorophenylboronic acids because of steric hinderance. Pd(PPh₃)₄ was more reactive for boronic acids with sterically hindering F atom(s), and the coupling reactions gave good yields of 90% and 91% without any self‐coupling by‐product.     

Pd‐Catalyzed Carbonylative α‐Arylation of Aryl Bromides: Scope and Mechanistic Studies

Reaction conditions for the three‐component synthesis of aryl 1,3‐diketones are reported applying the palladium‐catalyzed carbonylative α‐arylation of ketones with aryl bromides. The optimal conditions were found by using a catalytic system derived from [Pd(dba)₂] (dba=dibenzylideneacetone) as the palladium source and 1,3‐bis(diphenylphosphino)propane (DPPP) as the bidentate ligand. These transformations were run in the two‐chamber reactor, COware, applying only 1.5 equivalents of carbon monoxide generated from the CO‐releasing compound, 9‐methylfluorene‐9‐carbonyl chloride (COgen). The methodology proved adaptable to a wide variety of aryl and heteroaryl bromides leading to a diverse range of aryl 1,3‐diketones. A mechanistic investigation of this transformation relying on ³¹P and ¹³C NMR spectroscopy was undertaken to determine the possible catalytic pathway. Our results revealed that the combination of [Pd(dba)₂] and DPPP was only reactive towards 4‐bromoanisole in the presence of the sodium enolate of propiophenone suggesting that a [Pd(dppp)(enolate)] anion was initially generated before the oxidative‐addition step. Subsequent CO insertion into an [Pd(Ar)(dppp)(enolate)] species provided the 1,3‐diketone. These results indicate that a catalytic cycle, different from the classical carbonylation mechanism proposed by Heck, is operating. To investigate the effect of the dba ligand, the Pd⁰ precursor, [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)], was examined. In the presence of DPPP, and in contrast to [Pd(dba)₂], its oxidative addition with 4‐bromoanisole occurred smoothly providing the [PdBr(Ar)(dppp)] complex. After treatment with CO, the acyl complex [Pd(CO)Br(Ar)(dppp)] was generated, however, its treatment with the sodium enolate led exclusively to the acylated enol in high yield. Nevertheless, the carbonylative α‐arylation of 4‐bromoanisole with either catalytic or stoichiometric [Pd(η³‐1‐PhC₃H₄)(η⁵‐C₅H₅)] over a short reaction time, led to the 1,3‐diketone product. Because none of the acylated enol was detected, this implied that a similar mechanistic pathway is operating as that observed for the same transformation with [Pd(dba)₂] as the Pd source.