Differentiation of diiodothyronines using electrospray ionization tandem mass spectrometry

Diiodothyronines 3,5-diiodothyronine (3,5-T2), 3',5'-diiodothyronine (3',5'-T2), and 3,3'-diiodothyronine (3,3'-T2) are important metabolites of 3,5,3'-triiodothyronine (T3) and 3,3',5'-triiodothyronine (rT3; reverse T3). In this paper, a novel and rapid method for identifying and quantifying 3,5-T2, 3',5'-T2 and 3,3'-T2 has been introduced using electrospray ionization tandem mass spectrometry (ESI-MS/MS). Fragmentation patterns were proposed on the basis of our data obtained by ESI-MS/MS. MS2 spectra in either negative ionization mode or positive ionization mode can be used to differentiate 3,5-T2, 3',5'-T2 and 3,3'-T2. On the basis of the relative abundance of fragment ions in MS2 spectra under the positive ionization mode, quantification of the 3,5-T2, 3',5'-T2 and 3,3'-T2 isomers in mixtures is also achieved without prior separation.     

Characterization of amino acid‐derived betaines by electrospray ionization tandem mass spectrometry

Betaines belong to the naturally occurring osmoprotectants or compatible solutes present in a variety of plants, animals and microorganisms. In recent years, metabolomic techniques have been emerging as a fundamental tool for biologists because the constellation of these molecules and their relative proportions provide with information about the actual biochemical condition of a biological system. Therefore, identification and characterization of biologically important betaines are crucial, especially for metabolomic studies. Most of the natural betaines are derived from amino acids and related homologues. Although, theoretically, all the amino acids can be converted to corresponding betaines by simple methylation of the amine group, only a few of the amino acid‐derived betaines were fully characterized in the literature. Here, we report a combined electrospray ionization tandem and high‐resolution mass spectrometry study of all the betaines derived from amino acids, including the isomeric betaines. The decomposition pathway of protonated, sodiated and potassiated molecule ions that enable unambiguous characterization of the betaines including the isomeric betaines and overlapping ionic species of different betaines is distinctive. Copyright © 2012 John Wiley & Sons, Ltd.     

Accelerating effects of N‐aryl‐N′,N′‐dialkyl ureas on epoxy‐dicyandiamide curing system

This report focuses on epoxy‐dicyandiamide (DICY) curing system accelerated by N‐aryl‐N′,N′‐dialkyl urea, aiming at clarifying the accelerating mechanism and the relationship between accelerating effect and molecular structure of the accelerators. Nine N‐aryl‐N′,N′‐dialkyl ureas were synthesized and investigated with measurements of differential scanning calorimetry, thermo gravimetric/differential thermal analysis and NMR spectroscopy. The results revealed that the ureas released the corresponding secondary amines by the thermal dissociation in the presence of epoxide, which led to the formation of tertiary amines that catalyze the addition reaction of DICY to epoxide. Moreover, a tendency that the ureas able to release more compact amines exhibited higher acceleration effects was discovered. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Characterization of N,N‐dimethyl amino acids by electrospray ionization–tandem mass spectrometry

Methylation is an essential metabolic process for a number of critical reactions in the body. Methyl groups are involved in the healthy function of the body life processes, by conducting methylation process involving specific enzymes. In these processes, various amino acids are methylated, and the occurrence of methylated amino acids in nature is diverse. Nowadays, mass‐spectrometric‐based identification of small molecules as biomarkers for diseases is a growing research. Although all dimethyl amino acids are metabolically important molecules, mass spectral data are available only for a few of them in the literature. In this study, we report synthesis and characterization of all dimethyl amino acids, by electrospray ionization–tandem mass spectrometry (MS/MS) experiments on protonated molecules. The MS/MS spectra of all the studied dimethyl amino acids showed preliminary loss of H₂O + CO to form corresponding immonium ions. The other product ions in the spectra are highly characteristic of the methyl groups on the nitrogen and side chain of the amino acids. The amino acids, which are isomeric and isobaric with the studied dimethyl amino acids, gave distinctive MS/MS spectra. The study also included MS/MS analysis of immonium ions of dimethyl amino acids that provide information on side chain structure, and it is further tested to determine the N‐terminal amino acid of the peptides. Copyright © 2015 John Wiley & Sons, Ltd.     

Different responses of E:Z‐isomers of pesticides in liquid chromatography–electrospray ionization–mass spectrometry

The mass spectrometric behavior of four pairs of stereoisomers was investigated by liquid chromatography–electrospray ionization–mass spectrometry (LC–ESI–MS). The E‐ and Z‐isomers of the pesticides chlorfenvinphos, dimethomorph, mevinphos and phosphamidon—each with one double bond—were chosen for this study. The MS response of the individual isomers was investigated by infusing the isomers individually into the MS or after the separation of isomer mixtures via high‐performance liquid chromatography(HPLC). In the case of dimethomorph, the same MS response was found for the two isomers. In contrast to that, the individual isomers of chlorfenvinphos, mevinphos and phosphamidon showed different MS response both in the single ion monitoring (SIM) mode in single quadrupole MS and multiple reaction monitoring (MRM) mode in tandem MS. The MS response of the isomers partly depends on (1) the declustering potential of the precursor ion in the SIM mode, (2) the selected transition and (3) the collision energy in the MRM mode. Consequently, quantification by summation of the peak areas of the isomers is inaccurate due to over‐ or underestimating of one of the stereoisomers. Accurate quantitative results can only be achieved when the compound‐specific MS parameters are separately determined for each isomer. This can be done by using pure isomers or by the determination of the MS parameters after HPLC separation and the measurement of the actual isomer ratio with an independent technique. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of chemically modified steroids for doping control purposes by electrospray ionization tandem mass spectrometry

The discovery of the designer steroid tetrahydrogestrinone (THG) in elite athletes' doping control samples in 2003 demonstrated the availability of steroid derivatives prepared solely for doping purposes. Modern mass spectrometers utilizing electrospray ionization and collisionally activated dissociation (CAD) of analytes allow the structural characterization of steroids and their derivatization sites by the elucidation of fragmentation behaviors. A total of 21 steroids comprising either a 4,9,11-triene, a 3-keto-4-ene or a 3-keto-1-ene nucleus were investigated regarding their dissociation pathways, deuterated analogues were synthesized and fragmentation routes were postulated, permitting the identification of steroidal structures and modifications. Compounds based on a 4,9,11-triene steroid with an ethyl residue at C-13 (gestrinone analogues) generate abundant fragment ions at m/z 241 and 199, whereas the substitution of the C-13 ethyl group by a methyl residue (trenbolone analogues) results in a shift of m/z 241 to 227. Substances related to testosterone with a 3-keto-4-ene structure give rise to abundant fragment ions at m/z 109 and 97 whereas steroids with a 3-keto-1-ene nucleus eliminate the A-ring including the carbons C-1-C-4, in addition to C-19 that is proposed to migrate from C-10 to C-1 under CAD conditions.     

Desorption electrospray ionization ‐ orbitrap mass spectrometry of synthetic polymers and copolymers

Desorption ElectroSpray Ionization (DESI) ‐ Orbitrap Mass Spectrometry (MS) was evaluated as a new tool for the characterization of various industrial synthetic polymers (poly(ethylene glycol), poly(propylene glycol), poly(methylmethacrylate), poly(dimethylsiloxane)) and copolymers, with masses ranging from 500 g.mol⁻¹ up to more than 20 000 g.mol⁻¹. Satisfying results in terms of signal stability and sensitivity were obtained from hydrophobic surfaces (HTC Prosolia) with a mixture water/methanol (10/90) as spray solvent in the presence of sodium salt. Taking into account the formation of multiplied charged species by DESI‐MS, a strategy based on the use of a deconvolution software followed by the automatic assignment of the ions was described allowing the rapid determination of M_n, M_w and PDI values. DESI‐Orbitrap MS results were compared to those obtained from matrix‐assisted laser desorption/ionization‐ time‐of‐flight MS and gel permeation chromatography. An application of DESI‐Orbitrap MS for the detection and identification of polymers directly from cosmetics was described. Copyright © 2012 John Wiley & Sons, Ltd.     

Characterization of aconitine-type alkaloids in the flowers of Aconitum kusnezoffii by electrospray ionization tandem mass spectrometry

The fragmentation mechanism of aconitine-type alkaloids in the flowers of Aconitum kusnezoffii (FAK) was investigated using electrospray ionization tandem mass spectrometry (ESI-MS(n)) firstly. The analysis of the collision-induced dissociation (CID) spectra of three purified aconitine standards and six previously reported aconitines indicated that the fragmentation of the protonated aconitines at low-energy CID follows a similar pathway. The elimination of a C(8)-substituent such as an acetic acid or a fatty acid is the dominant fragmentation mode in MS2. Successive losses of CH(3)COOH, CH(3)OH, H(2)O, BzOH, and CO are the main fragmentation pathways of aconitine-type alkaloids in MS(3) spectra. Based on these features, a rapid method for the direct detection and characterization of alkaloids from an ethanolic extract of FAK is described. All the known aconitum alkaloids are detected and a series of lipo-aconitines has been found for the first time in this plant.     

Reactivity of 4‐thiothymidine with Fenton reagent investigated by UV‐visible spectroscopy and electrospray ionization mass spectrometry

The reactivity of the sulfur‐containing nucleoside 4‐thio‐(2′‐deoxy)‐thymidine usually abbreviated as 4‐thio‐thymidine, (S⁴‐TdR) under Fenton conditions, ie, in the presence of H₂O₂ and catalytic amounts of Fe(II), was investigated by UV‐vis spectroscopy and electrospray ionization single and tandem mass spectrometry (ESI‐MS and MS/MS). S⁴‐TdR hydroxylated on the S atom was found to be a key reaction intermediate, ultimately leading to (2′‐deoxy)‐thymidine usually abbreviated as thymidine, (TdR) as the main reaction product. This finding was in accordance with the outcome of the reaction between S⁴‐TdR and H₂O₂, previously investigated in our laboratory. On the other hand, the additional presence of ?OH radicals, induced by the Fe(II)/H₂O₂ combination, led to the increased generation of another interesting S⁴‐TdR product, already observed after its reaction with H₂O₂ alone, ie, the covalent dimer including a S? S bridge between two S⁴‐TdR molecules. More importantly, multihydroxylated derivatives of S⁴‐TdR and TdR were detected as peculiar products obtained under Fenton conditions. Among them, a product bearing an OH group both on the methyl group linked to the thymine ring and on the C5 atom of the ring was found to prevail. The results obtained during this study, integrated by those found previously in our laboratory, indicate 4‐thiothymidine as a promising molecular probe for the recognition, through a careful characterization of its reaction products, of the prevailing species among reactive oxygen species (ROS) corresponding to singlet‐state oxygen, hydrogen peroxide, and hydroxylic radical.     

Characterization of peptides by liquid chromatography/electrospray ionization mass spectrometry using silver nitrate as a post-column complexant

Two model peptides, des-Arg1-bradykinin (DAB) and bradykinin (B), were cationized by Ag+ after their separation by reversed-phase liquid chromatography (RPLC) prior to mass spectrometry (MS). Silver nitrate solution was used as a post-column reagent. The RPLC and MS experimental conditions were optimized using flow injection in order to obtain sufficiently abundant silver adducts to permit MS/MS experiments. The use of water-methanol with 0.1% formic acid as mobile phase allowed a good chromatographic separation of the two peptides with a polymeric stationary phase and sufficiently abundant silver-containing adducts, [M + Ag + H]2+ and [M + 2Ag]2+. The gas-phase dissociation of [DAB + Ag + H]2+ and [DAB + 2Ag]2+ led to interpretable mass spectra during the on-line cationization experiment. Most of the ions obtained by dissociating [DAB + Ag + H]2+ and [DAB + 2Ag]2+ species are silver-containing ions but the ions produced depend on the parent. The ions coming from the dissociation of the doubly charged silver adducts [DAB + Ag + H]2+ or [DAB + 2Ag]2+ are of interest compared with those coming from the singly charged silver species or doubly charged protonated species. The fragmentation of the doubly charged silver adducts provides ions over the entire mass range. Although the presence of several prolines in des-Arg1-bradykinin prevents the formation of some expected ions, the observation of triplets [an-H + Ag]+, [bn-H + Ag]+ and [bn + OH + Ag]+ produced by the dissociation of on-line Ag(+)-cationized peptides could contribute to greater success of automatic sequencing of peptides.     

Initiation of free‐radical polymerization by peroxypivalates studied by electrospray ionization mass spectrometry

Initiation by tert‐butyl peroxypivalate (TBPP), tert‐amyl peroxypivalate (TAPP), 1,1,3,3‐tetramethylbutyl peroxypivalate (TMBPP), or 1,1,2,2‐tetramethylpropyl peroxypivalate (TMPPP) of radical polymerization of methyl methacrylate in toluene solution at 90 °C was studied via polymer end‐group analysis using electrospray ionization mass spectrometry (ESI‐MS). Conclusive peak assignments allowed for measuring the type and concentration of the fragments that actually initiate macromolecular growth after thermal decomposition of these peroxypivalates. It was found that the pivaloyloxy radical moiety undergoes instantaneous decarboxylation to yield an initiating tert‐butyl radical. The alkoxy radical moiety, on the other hand, may generate, via β‐scission reaction, different types of carbon‐centered radicals (together with a ketone) or may undergo a 1,5‐H‐shift reaction, by which reaction an oxygen‐centered radical is transformed into a carbon‐centered hydroxy radical. This hydrogen shift reaction was found in case of TMBPP. Surprisingly, no evidence for initiating alkoxy radicals could be found, not even in case of initiation by TBPP, where the intermediate tert‐butoxy radical undergoes a rapid chain‐transfer reaction with the solvent toluene. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4266–4275, 2004     

Utilisation of electrospray time-of-flight mass spectrometry for solving complex fragmentation patterns: application to benzoxazinone derivatives

In this paper we describe the application of electrospray time-of-flight mass spectrometry (ESI-TOFMS) to structural elucidation of the fragment ions formed from a range of natural and synthetic allelochemical derivatives. The extensive mass spectrometric characterisation of ten non-glucosylated benzoxazinone derivatives using this method is described here for the first time. The analytes include six naturally occurring 1,4-benzoxazin-3(4H)-one derivatives, including the hydroxamic acids DIMBOA [2,4-dihydroxy-7-methoxy-2H-1,4-benzoxazin-3(4H)-one] and DIBOA [2,4-dihydroxy-2H-1,4-benzoxazin-3(4H)-one], lactams HBOA [2-hydroxy-2H-1,4-benzoxazin-3(4H)-one] and HMBOA [2-hydroxy-7-methoxy-2H-1,4-benzoxazin-3(4H)-one], benzoxazolinones BOA [benzoxazolin-2(3H)-one] and MBOA [6-methoxy-benzoxazolin-2(3H)-one] and four synthetic variations, 2'H-DIBOA [4-hydroxy-2H-1,4-benzoxazin-3(4H)-one], 2'OMe-DIBOA [2-methoxy-4-hydroxy-2H-1,4-benzoxazin-3(4H)-one], 2'H-HBOA [2H-1,4-benzoxazin-3(4H)-one] and 2'OMe-HBOA [2-methoxy-2H-1,4-benzoxazin-3(4H)-one]. Assignments of the mass spectral fragments were aided by elemental composition calculation results, comparison of structural analogues and background literature, and acquired knowledge regarding feasible structures for the compounds. The influence of substituents on the chemical reactivity of the compounds with respect to the observed MS behaviour over varying nozzle potentials is addressed and, through comparison of the structural analogues, generic fragmentation patterns have also been identified.     

Characterization and application of a self‐aspirating electrospray source with pneumatic‐assisted ionization

A single gas‐assisted electrospray ion source developed for ambient mass spectrometry is introduced in this paper. Simultaneous self‐aspiration and electrospray could be achieved by using a constant sheath gas flow supplied from a mini air pump. A gas dynamic study of the spray module is carried out for structural optimization. The entire device exhibits a simplified design and has been systematically characterized through both simulated and experimental investigations. According to the results, the ion source exhibited satisfactory stability and the ability for quantitative operation in routine electrospray ionization mass spectrometry. Furthermore, the ion source can be operated as a desorption electrospray ionization source to perform direct desorption/ionization of the solid samples. The versatile source described here appears to provide a practical approach to perform ambient mass spectrometry analysis with unrestricted sampling operation, and the extensive gas dynamic studies together with the experimental characterization are believed to be helpful in building self‐aspirating spray devices. Copyright © 2017 John Wiley & Sons, Ltd.     

Characterization of barley leaf tissue using direct and indirect desorption electrospray ionization imaging mass spectrometry

Chemical profiling of barley (Hordeum vulgare) leaves was demonstrated using direct and indirect desorption electrospray ionization (DESI) imaging mass spectrometry. Direct DESI analysis of the untreated leaves was not possible despite a significant content of hydroxynitrile glucosides known to reside in the epidermis of the leaves. Instead, the epidermis was stripped off the leaves, thus allowing direct DESI imaging to be performed on the back of the epidermis. Furthermore, indirect DESI imaging was performed by making imprints in porous Teflon of the intact leaves as well as of the stripped epidermis. The DESI images reveal accumulation of hydroxynitrile glucosides in the leaf epidermis, homogeneously distributed throughout the surface. The indirect DESI approach enables relative quantitation, confirming variations of hydroxynitrile glucosides content in primary leaves of three different cultivars of barley seedlings. The study presents an example of how to overcome the morphological barriers from the plant surface and perform rapid and repeatable DESI imaging. In addition, a comparison is made of direct and indirect DESI imaging, contributing to the characterization of the recently developed method of indirect DESI imaging of plant material via porous Teflon imprints.     

Electrospray ionization ion-trap multiple-stage mass spectrometry of Quillaja saponins

Fifteen identified C-18 fatty acyl-containing saponin structures from Quillaja saponaria Molina have been investigated by electrospray ionization ion-trap multiple-stage mass spectrometry (ESI-IT-MS(n)) in positive ion mode. Their MS(1)-MS(3) spectra were analyzed and ions corresponding to useful fragments, important for the structural identification of Quillaja saponins, were recognized. A few key fragments could describe the structural variations in the C-3 and the C-28 oligosaccharides of the Quillaja saponins. A flowchart involving a stepwise procedure based on key fragments from the MS(1)-MS(3) spectra of these saponins, together with key fragments from these saponins and 13 previously investigated saponins, was constructed for the identification of structural elements in Quillaja saponins. Peak intensity ratios in MS(3) spectra were found to be correlated to structural features of the investigated saponins and is therefore of value for the identification of regioisomers.     

Reversible addition–fragmentation chain‐transfer polymerization: Unambiguous end‐group assignment via electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry was performed to identify the structure of polymeric methyl acrylates generated via the cumyl dithiobenzoate (CDB), cumyl p‐fluorodithiobenzoate (CPFDB), and 1‐phenylethyl dithiobenzoate (PEDB) mediated reversible addition–fragmentation chain‐transfer (RAFT) polymerizations. The relatively simple spectra clearly demonstrate the end groups of this living free‐radical polymerization technique. Only polymeric chains carrying one leaving group of the RAFT agent and the dithiobenzoate end group as the active RAFT center were discovered. Multiple‐stage mass spectrometric experiments and oxidation of the dithioester end group confirmed the structure of the generated polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4032–4037, 2002     

Tandem mass spectrometry of poly(ethylene imine)s by electrospray ionization (ESI) and matrix‐assisted laser desorption/ionization (MALDI)

In this contribution, linear poly(ethylene imine) (PEI) polymers, which are of importance in gene delivery, are investigated in detail by using electrospray ionization‐quadrupole‐time of flight (ESI‐Q‐TOF) and matrix‐assisted laser desorption/ionization‐time of flight (MALDI‐TOF) mass spectrometry (MS). The analyzed PEIs with different end groups were synthesized using the polymerization of substituted 2‐oxazoline via a living cationic ring‐opening polymerization (CROP) and a subsequent hydrolysis under acidic conditions. The main goal of this study was to identify linear PEI polymers in a detailed way to gain information about their fragmentation pathways. For this purpose, a detailed characterization of three different linear PEIs was performed by using ESI‐Q‐TOF and MALDI‐TOF MS in combination with collision‐induced dissociation (CID) experiments. In ESI‐MS as well as MALDI‐MS analysis, the obtained spectra of PEIs resulted in fitting mass distributions for the investigated PEIs. In the tandem MS analysis, a 1,2‐hydride shift with a charge‐remote rearrangement via a four‐membered cyclic transition state, as well as charge‐induced fragmentation reactions, was proposed as the main fragmentation mechanisms according to the obtained fragmentation products from the protonated parent peaks. In addition, heterolytic and homolytic cleavages were proposed as alternative fragmentation pathways. Moreover, a 1,4‐hydrogen elimination was proposed to explain different fragmentation products obtained from the sodiated parent peaks. Copyright © 2012 John Wiley & Sons, Ltd.     

The mass spectral analysis of isolated hops A-type proanthocyanidins by electrospray ionization tandem mass spectrometry

Comprehensive mass spectral fragmentation patterns have been established for sequencing chromatographically isolated A-type proanthocyanidins (PAs) using electrospray ionization tandem mass spectrometry (ESI-MS(n)) in the positive ion mode similar to those used for sequencing previously reported B-type PAs. Sequence-identifying fragmentations for A-type PAs include heterocyclic ring fission (HRF), retro-Diels-Alder (RDA) fission, benzofuran-forming (BFF) fission, and quinone methide (QM) fission. There is commonality in fragmentation patterns between A-type and B-type PAs, but distinguishing features in the mass spectral patterns between the two classes include 2-Da mass differences in the pseudo molecular ions, the propensity for the A-type PAs to undergo QM fissions and yield bis-quinoid ions as opposed to mono-quinoid ions in the upper unit of the sequence, and the reluctance of A-type linkages to undergo RDA, BFF, and BFF/H(2)O fissions from the upper unit. The positions of one or more A-type (C2-->O-->C7') ether linkages have been located in sequences of PAs ranging in chain lengths of two to five monomer units using ESI-MS(n) data. Using the fragmentation information from ESI-MS(n) experiments, a total of 17 PAs were structurally sequenced by systematic real time ESI-MS(n). Among them ten A-type and six B-type hop PAs are reported here for the first time.     

Structural characterization and isomer differentiation of chalcones by electrospray ionization tandem mass spectrometry

A series of chalcones were characterized by electrospray ionization tandem mass spectrometry (MS(n)). Several ionization modes were evaluated, including protonation, deprotonation and metal complexation, with metal complexation being the most efficient. Collision-activated dissociation (CAD) was used to characterize the structures, and losses commonly observed include H(2), H(2)O, CO and CO(2), in addition to methyl radicals for the methoxy-containing chalcones. CAD of the metal complexes, especially [Co(II) (chalcone-H) 2,2'-bipyridine](+), allowed the most effective differentiation of the isomeric chalcones with several diagnostic fragment ions appearing upon activation of the metal complexes. MS(n) experiments were performed to support identification of some fragment ions and to verify the proposed fragmentation pathways. In several cases, MS(n) indicated that specific neutral losses occurred by stepwise pathways, such as the neutral loss of 44 u as CH3* and HCO*, or CH(4) and CO, in addition to CO(2).     

Rapid detection of pesticides in honey by solid‐phase micro‐extraction coupled with electrospray ionization mass spectrometry

Detection of pesticide residues in food samples is important for safeguarding food quality and safety. Conventional approaches for detection of pesticides in food samples typically involve labour‐intensive and time‐consuming sample pretreatment and chromatographic separation. In this study, solid phase micro‐extraction fibres were used to rapidly extract and enrich pesticides in honey, a popular agricultural product with complex matrix, and then directly coupled with electrospray ionization mass spectrometry for qualitative and quantitative analysis. Three pesticides, ie, atrazine, benalaxyl, and pirimicarb, were investigated using the technique and their analytical performances were evaluated. The limits of detection and limits of quantitation of all the three pesticides could fulfil the cut‐off values of the international standard. Linear calibration curves were constructed with good R² coefficients, and the accuracy and precision were in acceptable ranges for all the pesticides. The analysis time is much reduced, with only minimum sample preparation and no chromatographic separation involved. The technique is simple and easy to set up, and can be extended for analysis of other analytes and sample systems.