Dispersion‐solidification liquid–liquid microextraction for volatile aromatic hydrocarbons determination: Comparison with liquid phase microextraction based on the solidification of a floating drop

Two microextraction techniques – liquid phase microextraction based on solidification of a floating organic drop (LPME‐SFO) and dispersive liquid–liquid microextraction combined with a solidification of a floating organic drop (DLLME‐SFO) – are explored for benzene, toluene, ethylbenzene and o‐xylene sampling and preconcentration. The investigation covers the effects of extraction solvent type, extraction and disperser solvents' volume, and the extraction time. For both techniques 1‐undecanol containing n‐heptane as internal standard was used as an extracting solvent. For DLLME‐SFO acetone was used as a disperser solvent. The calibration curves for both techniques and for all the analytes were linear up to 10 μg/mL, correlation coefficients were in the range 0.997–0.998, enrichment factors were from 87 for benzene to 290 for o‐xylene, detection limits were from 0.31 and 0.35 μg/L for benzene to 0.15 and 0.10 μg/L for o‐xylene for LPME‐SFO and DLLME‐SFO, respectively. Repeatabilities of the results were acceptable with RSDs up to 12%. Being comparable with LPME‐SFO in the analytical characteristics, DLLME‐SFO is superior to LPME‐SFO in the extraction time. A possibility to apply the proposed techniques for volatile aromatic hydrocarbons determination in tap water and snow was demonstrated.     

Preparation and application of a coated‐fiber needle extraction device

In this study, a needle‐trap device with fibers coated with a molecularly imprinted polymer was developed for separation. A number of heat‐resistant Zylon filaments were longitudinally packed into a glass capillary, followed by coating with a molecularly imprinted polymer. Then, the molecularly imprinted polymer coating was copolymerized and anchored onto the surface of the fibers. The bundle of synthetic fibers coated with the molecularly imprinted polymer was packed into a 21G stainless‐steel needle and served as an extraction medium. The coated‐fiber needle extraction device was used to extract volatile organic compounds from paints and gasoline effectively. Subsequently, the extracted volatile organic compounds were analyzed by gas chromatography. Calibration curves of gaseous benzene, toluene, ethylbenzene, and o‐xylene in the concentration range of 1–250 μg/L were obtained to evaluate the method, acceptable linearity was attended with correlation coefficients above 0.998. The limit of detection of benzene, toluene, ethylbenzene, and o‐xylene was 11–20 ng/L using the coated‐fiber needle‐trap device. The relative standard deviation of needle‐to‐needle repeatability was less than 8% with an extraction time of 20 min. The loss rates after storage for 3 and 7 days at room temperature were less than 30%.     

Desorption of BTEX from activated charcoal using accelerated solvent extraction: evaluation of occupational exposures

A procedure for the determination of benzene, toluene, ethylbenzene and o-xylene, m-xylene and p-xylene (BTEX) in occupational environments is proposed. These compounds are extracted from activated charcoal using accelerated solvent extraction. Operational parameters are optimized and quantitative recovery is obtained using acetonitrile as the extraction solvent and 1-mL extraction cells, a preheat time of 2 min, a temperature of 160 °C, a pressure of 1,500 psi, a static period of 5 min, a flush volume of 110%, two cycles and a purge time of 90 s. Determination of BTEX compounds is carried out by gas chromatography using a flame ionization detector. The recoveries, obtained for a confidence level of 95%, are 91 ± 4, 100 ± 3, 104 ± 2, 93 ± 4, 99 ± 2 and 99 ± 2% for benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene, respectively. The detection limits are 0.5 μg for benzene, 0.7 μg for toluene and 1.0 μg for the other compounds. The proposed procedure has been applied to real samples collected in several workplaces, like a microbiology laboratory, an analytical chemistry laboratory, a printer’s, a car repair shop and a petrol station. From the results obtained, it can be concluded that the occupational exposures determined are always acceptable because they are lower than the tenth part of the recommended exposure limits (VLA-ED and VLA-EC).     

Simultaneous determination of benzene,toluene, ethylbenzene,and xylene metabolites in human urine using electromembrane extraction combined with liquid chromatography and tandem mass spectrometry

For the first time, electromembrane extraction combined with liquid chromatography and tandem mass spectrometry was applied for the determination of urinary benzene, toluene, ethylbenzene, and xylene metabolites. S‐Phenylmercapturic acid, hippuric acid, phenylglyoxylic acid, and methylhippuric acid isomers were extracted from human urine through a supported liquid membrane consisting of 1‐octanol into an alkaline acceptor solution filling the inside of a hollow fiber by application of an electric field. Various extraction factors were investigated and optimized using response surface methodology, the statistical method. The optimum conditions were established to be 300 V applied voltage, 15 min extraction time, 1500 rpm stirring speed, and 5 mM ammonium acetate (pH 10.2) acceptor solution. The method was validated with respect to selectivity, linearity, accuracy, precision, limit of detection, limit of quantification, recovery, and reproducibility. The results showed good linearity (r² > 0.995), precision, and accuracy. The extract recoveries were 52.8–79.0%. Finally, we applied this method to real samples and successfully measured benzene, toluene, ethylbenzene, and xylene metabolites.     

Multivariate optimization of headspace‐GC for the determination of monoaromatic compounds (benzene,toluene, ethylbenzene,and xylenes) in waters and wastewaters

The objective of this study was to optimize, by employing a central composite rotatable design, and validate an analytical method to detect and quantify monoaromatic compounds (benzene, toluene, ethylbenzene, and xylenes) in waters and wastewaters by using headspace extraction followed by GC coupled with photoionization detection. The extraction parameters optimized were: salinity, sample volume, incubation time, and extraction temperature. The results revealed that the sample volume was the most significant parameter in the extraction process, whereas the salinity effect was negligible, which extends the applicability of the analytical method to waters with different salinities. Finally, the studied method was very selective and, at the optimal extraction conditions (15 mL sample volume, 15 min incubation time, and temperature of 70°C), presented excellent repeatability (<4%), linearity (R > 0.999 for each compound), and sensitivity, since very low LODs (0.13–0.48 μg/L) and LOQs (0.43–1.61 μg/L) were achieved.     

原位自组装石墨烯固相微萃取探头的制备及其在水体苯系物分析中的应用

利用石墨烯的自组装性能,原位制备了基于石墨烯材料的固相微萃取(SPME)探头,并结合气相色谱-质谱(GC-MS)建立了水体中甲苯、乙苯和邻二甲苯的分析方法。通过SEM对探头进行表征,发现制备的探头石墨烯材料均匀、牢固地结合在石英光纤上。通过优化萃取模式、萃取温度、萃取时间和盐度,得到最佳条件:顶空萃取模式、萃取温度为40℃、萃取时间为3 min、盐度为30%NaCl。在最佳条件下,3种苯系物在0.2～200μg/L范围内呈现出良好的线性,线性系数(r²)为0.998 7～0.999 6;检出限为0.001 2～0.004 2μg/L;其相对标准偏差小于5%。对采集的3个样品进行测定,均不同浓度地测出了苯系物污染,其加标回收率为90.3%～111%。该方法可用于环境水样中挥发性苯系物的分析检测。     

Direct screening of water samples for benzene hydrocarbon compounds by headspace liquid-phase microextraction-gas chromatography

The applicability of headspace liquid-phase microextraction and gas chromatography is evaluated for the expeditious and reliable screening of tap and drinking water samples for selected volatile organic compounds (viz., benzene, toluene, ethylbenzene, and xylene isomers, BTEX). The method uses 3.5 microL of n-hexadecane as extraction solvent, 10 min extraction time with stirring at 1250 rpm, at 20 degrees C and 0.38 g/mL salt addition. The enrichment factors of this method are from 135 to 213. Limits of detection are in the range of 4.1-23.5 ng/L. The relative standard deviations at 0.05, 50, 200, and 400 microg/L of spiking levels are in the range of 0.61%-4.01%. Recoveries of six BTEX from drinking water at these spiking levels are between 95.4% and 104.4%.     

Preparation of a polymeric ionic liquid-coated solid-phase microextraction fiber by surface radical chain-transfer polymerization with stainless steel wire as support

Polymeric 1-vinyl-3-octylimidazolium hexafluorophosphate was synthesized in situ on stainless steel wire by surface radical chain-transfer polymerization and used as sensitive coatings in solid-phase microextraction. The outer surface of the stainless steel wire was firstly coated with microstructured silver layer via silver mirror reaction and then functionalized with self-assembled monolayers of 1,8-octanedithiol, which acted as chain transfer agent in the polymerization. Coupled to gas chromatography, extraction performance of the fiber was studied with both headspace and direct-immersion modes using benzene, toluene, ethylbenzene and xylenes (BTEX), phenols and polycyclic aromatic hydrocarbon (PAHs) as model analytes. In combination with the microstructured silver layer, the PIL-coated fiber exhibited high extraction efficiency. Linear ranges for BTEX with headspace mode were in the range of 0.2-1000 μg L(-1) for benzene, and 0.1-1000 μg L(-1) for toluene, ethylbenzene and xylenes. Limits of detection (LODs) were from 0.02 to 0.05 μg L(-1). Wide linear ranges of direct-immersion mode for the extraction of several phenols and PAHs were also obtained with correlation coefficients (R) from 0.9943 to 0.9997. The proposed fiber showed good durability with long lifetime. RSDs of 56 times extraction were still in an acceptable range, from 8.85 to 22.8%.     

Quantitative analysis of trace‐level benzene,toluene, ethylbenzene,and xylene in cellulose acetate tow using headspace heart‐cutting multidimensional gas chromatography with mass spectrometry

This study describes a method for the quantification of trace‐level benzene, toluene, ethylbenzene, and xylene in cellulose acetate tow by heart‐cutting multidimensional gas chromatography with mass spectrometry in selected ion monitoring mode. As the major volatile component in cellulose acetate tow samples, acetone would be overloaded when attempting to perform a high‐resolution separation to analyze trace benzene, toluene, ethylbenzene, and xylene. With heart‐cutting technology, a larger volume injection was achieved and acetone was easily cut off by employing a capillary column with inner diameter of 0.32 mm in the primary gas chromatography. Only benzene, toluene, ethylbenzene, and xylene were directed to the secondary column to result in an effective separation. The matrix interference was minimized and the peak shapes were greatly improved. Finally, quantitative analysis of benzene, toluene, ethylbenzene, and xylene was performed using an isotopically labeled internal standard. The headspace multidimensional gas chromatography mass spectrometry system was proved to be a powerful tool for analyzing trace volatile organic compounds in complex samples.     

A needle trap device packed with MIL-100(Fe) metal organic frameworks for efficient headspace sampling and analysis of urinary BTEXs

The aim of this study was to develop a new method for the determination of benzene, toluene, ethylbenzene and xylene isomers (BTEXs) in urine samples. In this method, MIL-100(Fe)@Fe₃O₄@SiO₂ metal–organic framework was synthesized, characterized and packed inside a needle trap device (NTD) as a sorbent for headspace extraction of unmetabolized BTEXs from urine samples followed by gas chromatography (GC) analysis. The GC device was equipped with a flame ionization detector (FID). The results showed that the optimal extraction time, extraction temperature and salt content were 60 min, 30°C and 5%, respectively. Also, the optimal desorption time and temperature were determined to be 1 min and 250°C, respectively. The limits of detection and quantification of the analytes of interest were in the ranges 0.0001–0.0005 and 0.0003–0.0014 μg ml⁻¹, respectively. The intra- and inter-day repeatability were <7.6%. The accuracy of the measurements in urine samples was in the range 7.1–11.4%. The results also demonstrated that the proposed NTD offered various advantages such as having high sensitivity and being inexpensive, reusable, user friendly, environmentally friendly and compatible for use with the GC device. Therefore, it can be efficiently used as a MIL–NTD for the extraction and analysis of unmetabolized BTEXs from urine samples.     

Preparation and application of carbon nanotubes/poly(o‐toluidine) composite fibers for the headspace solid‐phase microextraction of benzene,toluene, ethylbenzene,and xylenes

A novel nanocomposite coating of poly(o‐toluidine) and oxidized multiwalled CNTs (MWCNTs, where CNTs is carbon nanotubes) was electrochemically prepared on a stainless‐steel wire. The applicability of the fiber was assessed for the headspace solid‐phase microextraction of benzene, toluene, ethylbenzene, and xylenes in aqueous samples followed by GC with flame ionization detection. In order to obtain an adherent and stable composite coating, several experimental parameters related to the coating process, such as polymerization potential and time, and the concentration of o‐toluidine and oxidized MWCNTs were optimized. The combination of MWCNTs and polymer in a nanocomposite form presents desirable opportunities to produce materials for new applications. The effects of various parameters on the efficiency of the headspace solid‐phase microextraction process, such as desorption temperature and time, extraction temperature and time, and ionic strength were also investigated. At the optimum conditions, LODs were 0.03–0.06 μg/L. The method showed linearity in the range of 0.5–300 μg/L with coefficients of determination >0.99. The intraday and interday RSDs obtained at a 5 μg/L concentration level (n = 5) using a single fiber were 1.2–5.2 and 3.2–7.5%, respectively. The fiber‐to‐fiber RSD (%; n = 3) at 5 μg/L was 6.1–9.2%.     

Determination of Aromatic Hydrocarbons,Phenols, and Polycyclic Aromatic Hydrocarbons in Water by Stir bar Sorptive Extraction and Gas Chromatography–Mass Spectrometry

The paper presents procedures for stir bar sorptive extraction for selected priority substances that include polycyclic aromatic hydrocarbons, phenols, and benzene and its aromatic homologs. Three extraction and instrumental analysis procedures were developed for the determination of 16 compounds. The developed solid-phase extraction methods using a movable element had high recoveries above 70%. Extraction methods were optimized by selecting an appropriate time and temperature of the process, the sample pH, and stirring speed. The detection limits for the polycyclic aromatic hydrocarbons ranged from 0.33?µg/dm³ for naphthalene to 2.22?µg/dm³ for phenanthrene. Slightly higher limits of quantification were obtained for phenols: from 9.21?µg/dm³ for phenol to 0.51?µg/dm³ for 2,4,6-trimethylphenol. The highest limit of quantification for the tested compounds was obtained for benzene, with a value of 36.6?µg/dm³, while for toluene and ethylbenzene, the values did not exceed 2.7?µg/dm³.     

Determination of benzylsuccinic acid in gasoline-contaminated groundwater by solid-phase extraction coupled with gas chromatography-mass spectrometry

Benzylsuccinic acid (BSA) and methylbenzylsuccinic acid (methyl-BSA) are unambiguous biotransformation products resulting from anaerobic toluene and xylene biodegradation, respectively. A solid-phase extraction method based on polystyrene-divinylbenzene sorbent was developed for the quantitative BSA determination in groundwater samples as an alternative to liquid-liquid extraction. Gas chromatography coupled with mass spectrometry was used for separation and detection. The recovery from spiked 11 groundwater samples was 88 to 100%. The precision of the method, indicated by the relative standard deviation, was +/- 4% and the method detection limit was 0.2 microg/l. The concentration of BSA and methyl-BSA in groundwater samples from anaerobic BTEX (benzene, toluene, ethylbenzene and xylenes)-contaminated sites ranged from below the detection limit (3 microg/l) to 155 microg/l.     

气相色谱法同时测定溶剂型胶黏剂中的9种有害物质

建立了利用毛细管柱气相色谱同时测定溶剂型胶黏剂中苯、 甲苯、 对（间）二甲苯、 邻二甲苯、 二氯甲烷、1,2-二氯乙烷、1,1,2-三氯乙烷、三氯乙烯、甲苯二异氰酸酯（TDI）的方法,并对样品中有害物质的分离提取和色谱条件进行了研究.实验结果表明,方法化合物浓度在10~300 μg/mL时,线性相关系数不低于0.999 1,样品加标回收率在91.2%~104.1%之间,相对标准偏差均小于5%,检出限为0.1~3.0 μg/mL.方法不仅回收率高、重现性好,而且简便、快速.     

有机膨润土对水中苯、甲苯、乙苯、二甲苯和铬酸根离子的吸附性能

污水处理;有机膨润土对水中苯、甲苯、乙苯、二甲苯和铬酸根离子的吸附性能     

Qualitative screening for volatile organic compounds in human blood using solid‐phase microextraction and gas chromatography‐mass spectrometry

A fast and simple screening procedure using solid‐phase microextraction and gas chromatography‐mass spectrometry (SPME‐GC‐MS) in full‐scan mode for the determination of volatile organic compounds (VOC) is presented. The development of a fast and simple screening technique for the simultaneous determination of various volatiles is of great importance, because of their widespread use, frequent occurrence in forensic toxicological questions and the fact that there is often no hint on involved substances at the crime scene. To simulate a screening procedure, eight VOC with different chemical characteristics were chosen (isoflurane, halothane, hexane, chloroform, benzene, isooctane, toluene and xylene). To achieve maximum sensitivity, variables that influence the SPME process, such as type of fiber, extraction and desorption temperature and time, agitation and additives were optimized by preliminary studies and by means of a central composite design. The limits of detection and recoveries ranged from 2.9 µg/l (xylene) to 37.1 µg/l (isoflurane) and 7.9% (chloroform) to 61.5% (benzene), respectively. This procedure can be used to answer various forensic and toxicological questions. The short time taken for the whole analytical procedure may make its eventual adoption for routine analysis attractive. Copyright © 2010 John Wiley & Sons, Ltd.     

Screening the extractability of some typical environmental pollutants by ionic liquids in liquid-phase microextraction

The extractability of some typical environmental pollutants in ionic liquids (ILs) was screened by using a simple one-step liquid phase microextraction procedure. It was demonstrated that 1-alkyl-3-methylimidazolium hexafluorophosphate ([CnMIM][PF6], n = 4, 8), two typical ILs, could effectively extract a set of 45 typical environmental pollutants including BTEX (benzene, toluene, ethylbenzene, and xylene), polycyclic aromatic hydrocarbons, phthalates, phenols, aromatic amines, herbicides, organotin, and organomecury. Analytes in 10 mL sample solution held in a 15 mL vial were extracted by a 5 microL drop of ILs suspended on the needle of a high-performance liquid chromatography (HPLC) microsyringe; this was followed by HPLC, atomic absorption spectrometry, or cold-vapor atomic fluorescence spectrometry determination. The enrichment factors determined were in the range of 5-168 for 15 min extraction by [C4MIM][PF6] and 4-178 for 30 min extraction by [C8MIM][PF6], respectively, which indicates that ILs might be considered as potential environmentally benign alternative recyclable solvents for the enrichment of environmental pollutants.     

固相微萃取涂层的制备及其在水体和气态基质中的应用

采用物理涂渍的方法制备了γ-Al2O3固相微萃取涂层。通过γ-Al2O3固相微萃取（SPME）-气相色谱（GC）联用技术,对水中痕量苯系物苯、甲苯、乙苯、二甲苯异构体(BTEXs)进行萃取分析,结果表明该涂层具有热稳定性强(最高使用温度可达350 ℃)、灵敏度高(检测限为1~10 μg/L)以及制备重复性好（相对标准偏差为8.3%）的特点;同时该涂层对气态基质中的污染物亦可进行萃取分析。     

柚子皮生物炭质用于河水中苯系物的固相微萃取

苯、甲苯、乙苯和二甲苯(邻二甲苯、间二甲苯、对二甲苯)组成的苯系物(BTEX)是炼油厂和石化厂等工业园区普遍制造和排放的碳氢化合物,具有一定的毒性和致癌作用,对生态环境和人类健康造成极大威胁。研究以低成本、绿色且富含木质素和含氧官能团的柚子皮作为植物原料,在有限氧条件下采用程序升温热解法制备了柚子皮生物炭质吸附剂,通过N₂吸附-脱附等温线和孔径分布图对不同热解温度下制备的柚子皮生物炭质吸附剂的孔隙结构进行了考察。结果表明:在1000 ℃热解温度下制得的柚子皮生物炭质具有更高的比表面积(749.9 m²/g)、更大的孔体积(0.42 cm³/g)、更集中的孔径分布(2~3 nm)。将吸附剂通过溶胶-凝胶法(sol-gel)涂覆在铁丝上制成固相微萃取纤维,与气相色谱-火焰离子化检测器(GC-FID)相结合,对影响萃取和分离BTEX的条件进行优化,建立了用于BTEX检测的高灵敏度分析方法。方法具有检出限低(0.004~0.032 μg/L)、线性范围宽(1~100 μg/L)、线性关系好、萃取效率高(约为商品化涂层聚二甲基硅氧烷(7 μm)的2.9~18.3倍)等优势。此外,应用该方法已成功在河水样本中检测出了乙基苯(4.80 μg/L),邻二甲苯(3.00 μg/L)和对二甲苯、间二甲苯(2.46 μg/L)。最后将该方法应用于河水样本的加标试验中,得到了满意的回收率(75.7%~117.6%)。实验结果表明所建立的分析方法可实现对环境水样(河水)中BTEX的低成本、高灵敏度检测。     

Combining stir-bar sorptive extraction and large volume injection-gas chromatography-mass spectrometry for the determination of benzotriazole UV stabilizers in wastewater matrices

Stir‐bar sorptive extraction and liquid desorption followed by large volume injection‐gas chromatography coupled to mass spectrometry under selected ion monitoring mode acquisition (SBSE‐LD/LVI‐GC‐MS(SIM)) was applied for the determination of six benzotriazole UV stabilizers (Tinuvin P, Allyl‐bzt, Tinuvin 320, Tinuvin 326, Tinuvin 327 and Tinuvin 328) in wastewater matrices. Parameters affecting the performance of extraction and desorption steps were thoroughly evaluated using uni‐ and multivariate optimization strategies, based on the use of experimental factorial designs. Assays performed with stir bars, coated with 24 μL of polydimethylsiloxane, on 25 mL of ultra‐pure water samples spiked at the 0.5 ng/mL level, yielded recoveries ranging from 47.9±1.4% (Tinuvin P) to 103.1±3.6% (Tinuvin 326), under optimized experimental conditions. When applied to complex matrices (e.g. wastewater), the methodology showed also excellent linear dynamic ranges (0.02–10.00 ng/mL) for the six benzotriazole UV stabilizers studied with correlation coefficients higher than 0.9970, limits of quantification in between 0.004 and 0.015 ng/mL, suitable repeatability (RSD<12.7%) and reproducibility (RSD<4.5%). The application of the proposed methodology to urban sewage waters from Spain and Portugal wastewater plants revealed the presence of low contents of some benzotriazole UV stabilizers.