Benchmark calculations of 29Si–1H spin–spin coupling constants across double bond

Benchmark calculations of geminal and vicinal ²⁹Si–¹H spin–spin coupling constants across double bond in three reference alkenylsilanes have been carried out at both DFT and SOPPA levels in comparison with experiment. At the former, four density functionals, B3LYP, B3PW91, PBE0 and KT3, were tested in combination with five representative basis sets. At the latter, three main SOPPA‐based methods, SOPPA, SOPPA(CC2) and SOPPA(CCSD), were examined in combination with the same series of basis sets. On the whole, the wavefunction methods showed much better results as compared to DFT, with the most efficient combination of SOPPA/cc‐pVTZ‐su2 characterized by a mean absolute error of only 0.4 Hz calculated for a set of nine coupling constants in three compounds with a sample span of around 40 Hz. Copyright © 2012 John Wiley & Sons, Ltd.     

First example of the correlated calculation of the one‐bond tellurium–carbon spin–spin coupling constants: Relativistic effects,vibrational corrections,and solvent effects

This work reports on the comprehensive calculation of the NMR one‐bond spin–spin coupling constants (SSCCs) involving carbon and tellurium, ¹J(¹²⁵Te,¹³C), in four representative compounds: Te(CH₃)₂, Te(CF₃)₂, Te(C?CH)₂, and tellurophene. A high‐level computational treatment of ¹J(¹²⁵Te,¹³C) included calculations at the SOPPA level taking into account relativistic effects evaluated at the 4‐component RPA and DFT levels of theory, vibrational corrections, and solvent effects. The consistency of different computational approaches including the level of theory of the geometry optimization of tellurium‐containing compounds, basis sets, and methods used for obtainig spin–spin coupling values have also been discussed in view of reproducing the experimental values of the tellurium–carbon SSCCs. Relativistic corrections were found to play a major role in the calculation of ¹J(¹²⁵Te,¹³C) reaching as much as almost 50% of the total value of ¹J(¹²⁵Te,¹³C) while relativistic geometrical effects are of minor importance. The vibrational and solvent corrections account for accordingly about 3–6% and 0–4% of the total value. It is shown that taking into account relativistic corrections, vibrational corrections and solvent effects at the DFT level essentially improves the agreement of the non‐relativistic theoretical SOPPA results with experiment. © 2016 Wiley Periodicals, Inc.     

Nonempirical calculations of the one‐bond 29Si–13C spin–spin coupling constants taking into account relativistic and solvent corrections

The computational study of the one‐bond ²⁹Si–¹³C spin–spin coupling constants has been performed at the second‐order polarization propagator approximation (SOPPA) level in the series of 60 diverse silanes with a special focus on the main factors affecting the accuracy of the calculation including the level of theory, the quality of the basis set, and the contribution of solvent and relativistic effects. Among three SOPPA‐based methods, SOPPA(MP2), SOPPA(CC2), and SOPPA(CCSD), the best result was achieved with SOPPA(CCSD) when used in combination with Sauer's basis set aug‐cc‐pVTZ‐J characterized by the mean absolute error of calculated coupling constants against the experiment of ca 2 Hz in the range of ca 200 Hz. The SOPPA(CCSD)/aug‐cc‐pVTZ‐J method is recommended as the most accurate and effective computational scheme for the calculation of ¹J(Si,C). The slightly less accurate but essentially more economical SOPPA(MP2)/aug‐cc‐pVTZ‐J and/or SOPPA(CC2)/aug‐cc‐pVTZ‐J methods are recommended for larger molecular systems. It was shown that solvent and relativistic corrections do not play a major role in the computation of the total values of ¹J(Si,C); however, taking them into account noticeably improves agreement with the experiment. The rovibrational corrections are estimated to be of about 1 Hz or 1–1.5% of the total value of ¹J(Si,C). Copyright © 2014 John Wiley & Sons, Ltd.     

Fluorine spin–spin coupling constants of pentafluorobenzene revisited at the ab initio correlated levels

All possible spin–spin coupling constants, ¹⁹F–¹⁹F, ¹⁹F–¹³C, and ¹⁹F–¹H, of pentafluorobenzene were calculated at five different levels of theory, HF, DFT, SOPPA (CCSD), CCSD, and the SOPPA (CCSD)-based composite scheme with taking into account solvent, vibrational, relativistic, and correlation corrections. Most corrections were next to negligible for the long-range couplings but quite essential for the one-bond carbon–fluorine coupling constants. Hartree–Fock calculations were found to be entirely unreliable, while DFT results were comparable in accuracy with the data obtained using the wave function-based methods.     

Relativistic effects in the one‐bond spin–spin coupling constants involving selenium

One‐bond spin–spin coupling constants involving selenium of seven different types, ¹ J(Se,X), X = ¹H, ¹³C, ¹⁵ N, ¹⁹ F, ²⁹Si, ³¹P, and ⁷⁷Se, were calculated in the series of 14 representative compounds at the SOPPA(CCSD) level taking into account relativistic corrections evaluated both at the RPA and DFT levels of theory in comparison with experiment. Relativistic corrections were found to play a major role in the calculation of ¹ J(Se,X) reaching as much as almost 170% of the total value of ¹ J(Se,Se) and up to 60–70% for the rest of ¹ J(Se,X). Scalar relativistic effects (Darwin and mass‐velocity corrections) by far dominate over spin–orbit coupling in the total relativistic effects for all ¹ J(Se,X). Taking into account relativistic corrections at both random phase approximation and density functional theory levels essentially improves the agreement of theoretical results with experiment. The most ‘relativistic’ ¹ J(Se,Se) demonstrates a marked Karplus‐type dihedral angle dependence with respect to the mutual orientation of the selenium lone pairs providing a powerful tool for stereochemical analysis of selenoorganic compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

Prediction of water's isotropic nuclear shieldings and indirect nuclear spin–spin coupling constants (SSCCs) using correlation‐consistent and polarization‐consistent basis sets in the Kohn–Sham basis set limit

Density functional theory (DFT) was used to estimate water's isotropic nuclear shieldings and indirect nuclear spin–spin coupling constants (SSCCs) in the Kohn–Sham (KS) complete basis set (CBS) limit. Correlation‐consistent cc‐pVxZ and cc‐pCVxZ (x = D, T, Q, 5, and 6), and their modified versions (ccJ‐pVxZ, unc‐ccJ‐pVxZ, and aug‐cc‐pVTZ‐J) and polarization‐consistent pc‐n and pcJ‐n (n = 0, 1, 2, 3, and 4) basis sets were used, and the results fitted with a simple mathematical formula. The performance of over 20 studied density functionals was assessed from comparison with the experiment. The agreement between the CBS DFT‐predicted isotropic shieldings, spin–spin values, and the experimental values was good and similar for the modified correlation‐consistent and polarization‐consistent basis sets. The BHandH method predicted the most accurate ¹H, ¹⁷O isotropic shieldings and ¹J(OH) coupling constant (deviations from experiment of about ? 0.2 and ? 1 ppm and 0.6 Hz, respectively). The performance of BHandH for predicting water isotropic shieldings and ¹J(OH) is similar to the more advanced methods, second‐order polarization propagator approximation (SOPPA) and SOPPA(CCSD), in the basis set limit. Copyright © 2008 John Wiley & Sons, Ltd.     

Non‐empirical calculations of NMR indirect carbon–carbon coupling constants: 1. Three‐membered rings

The carbon–carbon indirect nuclear spin–spin coupling constants in cyclopropane, aziridine and oxirane were investigated by means of ab initio calculations at the RPA, SOPPA and DFT/B3LYP levels. We found that the carbon–carbon couplings are by far dominated by the Fermi contact term. Our best SOPPA and DFT results are in a very good agreement with each other and with the experimental values, whereas calculations at the RPA level of theory strongly overestimate the carbon–carbon couplings. Significant differences in the basis set dependence of the calculated carbon–carbon coupling constants obtained with either wavefunction method, RPA or SOPPA, or the density functional method, DFT/B3LYP, are observed. The SOPPA results depend much more strongly on the quality of the basis set than the results of DFT/B3LYP calculations. The medium‐sized core‐valence basis sets cc‐pCVTZ and even cc‐pCVDZ were found to perform fairly well at the SOPPA level for the one‐bond carbon–carbon couplings investigated here. Copyright © 2002 John Wiley & Sons, Ltd.     

Difluorobenzenes revisited: an experimental and theoretical study of spin–spin coupling constants for 1,2‐, 1,3‐, and 1,4‐difluorobenzene

The experimental spin–spin coupling constants (SSCCs) for 1,3‐ and 1,4‐difluorobenzene have been determined anew, and found to be consistent with previously determined values. SSCCs for 1,2‐, 1,3‐, and 1,4‐difluorobenzene have been analyzed by comparing them with the coupling constants computed using the second‐order polarization propagator approximation (SOPPA) and the equation‐of‐motion coupled cluster singles and doubles method (EOM‐CCSD). Eighty experimental values have been analyzed using SOPPA calculations, and a subset of 40 values using both SOPPA and EOM‐CCSD approaches. One‐bond coupling constants ¹J(C? C) and ¹J(C? F) are better described by EOM‐CCSD, whereas one‐bond ¹J(C? H) values are better described by SOPPA. An empirical equation is presented which allows for the prediction of unknown coupling constants from computed SOPPA values. A similar approach may prove useful for predicting coupling constants in larger systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Accurate Quantum‐Chemical Prediction of Enthalpies of Formation of Small Molecules in the Gas Phase

The coupled‐cluster approach, including single and double excitations and perturbative corrections for triple excitations, is capable of predicting molecular electronic energies and enthalpies of formation of small molecules in the gas phase with very high accuracy (specifically, with error bars less than 5 kJ mol^?1), provided that the electronic wavefunction is dominated by the Hartree–Fock configuration. This capability is illustrated by calculations on molecules containing O–H and O–F bonds, namely OH, FO, H₂O, HOF, and F₂O. To achieve this very high accuracy, it is imperative to account for electron‐correlation effects in a quantitative manner, either by using explicitly correlated two‐particle basis functions (R12 functions) or by extrapolating to the limit of a complete basis. Besides taking into account harmonic zero‐point vibrational energies, it is also necessary to account for anharmonic corrections to the zero‐point vibrational energies, to include the core orbitals into the coupled‐cluster calculations, and to account for spin–orbit corrections and scalar relativistic effects. These additional corrections constitute small but significant contributions in the range of 1–4 kJ mol^?1 to the enthalpies of formation of the aforementioned molecules. The highly accurate coupled‐cluster results, obtained by employing R12 functions and by including various corrections, are compared with standard Kohn–Sham density‐functional calculations as well as with the Gaussian‐2 and complete‐basis‐set model chemistries.     

Description of excited states in [Re(Imidazole)(CO)3(Phen)]+ including solvent and spin‐orbit coupling effects: Density functional theory versus multiconfigurational wavefunction approach

The low‐lying electronic excited states of [Re(imidazole)(CO)₃(phen)]⁺ (phen = 1,10‐phenanthroline) ranging between 420 nm and 330 nm have been calculated by means of relativistic spin‐orbit time‐dependent density functional theory (TD‐DFT) and wavefunction approaches (state‐average‐CASSCF/CASPT2). A direct comparison between the theoretical absorption spectra obtained with different methods including SOC and solvent corrections for water points to the difficulties at describing on the same footing the bands generated by metal‐to‐ligand charge transfer (MLCT), intraligand (IL) transition, and ligand‐to‐Ligand‐ charge transfer (LLCT). While TD‐DFT and three‐roots‐state‐average CASSCF (10,10) reproduce rather well the lowest broad MLCT band observed in the experimental spectrum between 420 nm and 330 nm, more flexible wavefunctions enlarged either by the number of roots or by the number of active orbitals and electrons destabilize the MLCT states by introducing IL and LLCT character in the lowest part of the absorption spectrum. © 2016 Wiley Periodicals, Inc.     

Resonance assignments of diastereotopic CH2 protons in the anomeric side chain of selenoglycosides by means of 2J(Se,H) spin‐spin coupling constants

Unambiguous resonance assignments of diastereotopic CH₂ protons in the anomeric side chain of nine alkyl‐ and aralkylselenoglycosides have been carried out on the basis of experimental CPMG‐HSQMBC measurements and theoretical second order polarization propagator approach (SOPPA) calculations of geminal ⁷⁷Se‐¹H spin‐spin coupling constants involving diastereotopic pro‐R and pro‐S protons. Theoretical conformational analyses have been performed at the MP2/6‐311G** level. The conformational space of each of the selenoglycosides under study could be adequately described as a mixture of six interconverting conformers with the molar fractions depending on the nature of the side chain substituent at the selenium atom. The good agreement observed between measured and the weighted conformational averaged values of the calculated coupling constants provides a basis for reliable diastereotopic assignments in this type of carbohydrate structures. Copyright © 2012 John Wiley & Sons, Ltd.     

Four‐component relativistic DFT calculations of 77Se NMR chemical shifts: A gateway to a reliable computational scheme for the medium‐sized organoselenium molecules

A versatile high‐accuracy computational scheme for the ⁷⁷Se nuclear magnetic resonance (NMR) chemical shifts of the medium‐sized organoselenium compounds is suggested within a framework of a full four‐component relativistic density functional theory (DFT). The main accuracy factors (DFT functionals, relativistic geometry, vibrational corrections, and solvent effects) are addressed. The best result is achieved with NMR‐oriented KT2 functional of Keal–Tozer characterized by a fairly small error of only 30 ppm for the span of about 1700 ppm (<2%). © 2015 Wiley Periodicals, Inc.     

Correlated ab initio calculations of one-bond 31P?77Se and 31P?125Te spin–spin coupling constants in a series of PSe and PTe systems accounting for relativistic effects (part 2)

Synthetic chalcogen–phosphorus chemistry permanently makes new challenges to computational Nuclear Magnetic Resonance (NMR) spectroscopy, which has proven to be a powerful tool of structural analysis of chalcogen–phosphorus compounds. This paper reports on the calculations of one-bond ³¹P ⁷⁷Se and ³¹P ¹²⁵Te NMR spin–spin coupling constants (SSCCs) in the series of phosphine selenides and tellurides. The applicability of the combined computational approach to the one-bond ³¹P ⁷⁷Se and ³¹P ¹²⁵Te SSCCs, incorporating the composite nonrelativistic scheme, built of high-accuracy correlated SOPPA (CC2) and Coupled Cluster Single and Double (CCSD) methods and the Density Functional Theory (DFT) relativistic corrections (four-component level), was examined against the experiment and another scheme based on the four-component relativistic DFT method. A special J-oriented basis set (acv3z-J) for selenium and tellurium atoms, developed previously by the authors, was used throughout the NMR calculations in this work at the first time. The proposed computational methodologies (combined and ‘pure’) provided a reasonable accuracy for ³¹P ⁷⁷Se and ³¹P ¹²⁵Te SSCCs against experimental data, characterizing by the mean absolute percentage errors of about 4% and 1%, and 12% and 8% for selenium and tellurium species, respectively. The present study reports typical relativistic corrections to ⁷⁷Se ³¹P and ¹²⁵Te ³¹P SSCCs, calculated within the four-component DFT formalism for a broad series of tertiary phosphine selenides and tellurides with different substituents at phosphorus.     

Full four‐component relativistic calculations of the one‐bond 77Se–13C spin‐spin coupling constants in the series of selenium heterocycles and their parent open‐chain selenides

Four‐component relativistic calculations of ⁷⁷Se–¹³C spin–spin coupling constants have been performed in the series of selenium heterocycles and their parent open‐chain selenides. It has been found that relativistic effects play an essential role in the selenium–carbon coupling mechanism and could result in a contribution of as much as 15–25% of the total values of the one‐bond selenium–carbon spin‐spin coupling constants. In the overall contribution of the relativistic effects to the total values of ¹J(Se,C), the scalar relativistic corrections (negative in sign) by far dominate over the spin‐orbit ones (positive in sign), the latter being of less than 5%, as compared to the former (ca 20%). A combination of nonrelativistic second‐order polarization propagator approach (CC2) with the four‐component relativistic density functional theory scheme is recommended as a versatile tool for the calculation of ¹J(Se,C). Solvent effects in the values of ¹J(Se,C) calculated within the polarizable continuum model for the solvents with different dielectric constants (ε 2.2–78.4) are next to negligible decreasing negative ¹J(Se,C) in absolute value by only about 1 Hz. The use of the locally dense basis set approach applied herewith for the calculation of ⁷⁷Se–¹³C spin‐spin coupling constants is fully justified resulting in a dramatic decrease in computational cost with only 0.1–0.2‐Hz loss of accuracy. Copyright © 2014 John Wiley & Sons, Ltd.     

All‐electron relativistic computations on the low‐lying electronic states,bond length,and vibrational frequency of CeF diatomic molecule with spin–orbit coupling effects

Ab initio all‐electron computations have been carried out for Ce⁺ and CeF, including the electron correlation, scalar relativistic, and spin–orbit coupling effects in a quantitative manner. First, the n‐electron valence state second‐order multireference perturbation theory (NEVPT2) and spin–orbit configuration interaction (SOCI) based on the state‐averaged restricted active space multiconfigurational self‐consistent field (SA‐RASSCF) and state‐averaged complete active space multiconfigurational self‐consistent field (SA‐CASSCF) wavefunctions have been applied to evaluations of the low‐lying energy levels of Ce⁺ with [Xe]4f¹5d¹6s¹ and [Xe]4f¹5d² configurations, to test the accuracy of several all‐electron relativistic basis sets. It is shown that the mixing of quartet and doublet states is essential to reproduce the excitation energies. Then, SA‐RASSCF(CASSCF)/NEVPT2 + SOCI computations with the Sapporo(‐DKH3)‐2012‐QZP basis set were carried out to determine the energy levels of the low‐lying electronic states of CeF. The calculated excitation energies, bond length, and vibrational frequency are shown to be in good agreement with the available experimental data. © 2018 Wiley Periodicals, Inc.     

Non‐empirical calculations of NMR indirect carbon–carbon coupling constants: 2. Strained polycarbocycles

High‐level non‐empirical calculations of carbon–carbon spin–spin coupling constants in a series of strained polycarbocycles have been carried out, in excellent agreement with available experimental data. The utmost importance of electronic correlation effects in this case has been demonstrated and it has been shown that the Second‐Order Polarization Propagator Approach (SOPPA) is an adequate method to account for those effects. It has been demonstrated that the most reliable basis sets to calculate J(C,C) at the SOPPA level are the correlation‐consistent basis sets of Dunning and co‐workers augmented with inner core s‐functions or decontracted in their s‐parts. The nature of the unusual bridgehead–bridgehead bonds in bicyclobutane and propellane in terms of s‐characters of bonding hybrids and also the hybridization effects in spiropentane are discussed based on the arguments derived from the current calculations of J(C,C) in the title compounds. The values of the unknown J(C,C) in propellane and spiropentane are predicted with high reliability. Copyright © 2003 John Wiley & Sons, Ltd.     

Structure and stability of high‐spin Aun(n = 2–8) clusters

The structures and relative stability of the maximum‐spin ⁿ⁺¹Au_n and ⁿAu (n = 2–8) clusters have been determined by density‐functional theory. The structure optimizations and vibrational frequency analysis are performed with the gradient‐corrections of Perdew along with his 1981 local correlation functional, combined with SBKJC effective core potential, augmented in the valence basis set by a set of f functions. We predicted the existence of a number of previously unknown isomers. The energetic and electronic properties of the small high‐spin gold clusters are strongly dependent on sizes. The high‐spin clusters tend to holding three‐dimensional geometry rather than planar form preferred in low‐spin situations. In whole high‐spin Au_n (n = 2–8) neutral and cationic species, ⁵Au₄, ²Au, and ⁴Au are predicted to be of high stability, which can be explained by valence bond theory. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Complete basis set prediction of methanol isotropic nuclear magnetic shieldings and indirect nuclear spin–spin coupling constants (SSCC) using polarization‐consistent and XZP basis sets and B3LYP and BHandH density functionals

Efficient B3LYP and BHandH density functionals were used to estimate methanol's nuclear magnetic isotropic shieldings and spin–spin coupling constants in the basis set limit. Polarization‐consistent pcS‐n and pcJ‐n (n = 0, 1, 2, 3 and 4), and segmented contracted XZP, where X = D, T, Q and 5, basis sets were used and the results fitted with simple mathematical formulas. The performance of the methods was assessed from comparison with experiment and higher level calculations. ¹J(CH) and ³J(HH) values were determined from very diluted solutions in deuterochloroform and compared with theoretical predictions. The agreement between complete basis set (CBS) density functional theory (DFT) predicted isotropic shieldings and spin–spin values and experiment was good. The BHandH/pcS‐n methanol shieldings obtained using structures optimized at the same level of theory are approaching the accuracy of the advanced coupled‐cluster‐singles‐doubles‐approximate triples (CCSD(T)) calculations. Copyright © 2009 John Wiley & Sons, Ltd.     

Theoretical study of spectroscopic and molecular properties of several low‐lying electronic states of CO molecule

The potential energy curves (PECs) of eight low‐lying electronic states (X¹Σ⁺, a³Π, a′³Σ⁺, d³Δ, e³Σ^?, A¹Π, I¹Σ^?, and D¹Δ) of the carbon monoxide molecule have been studied by an ab initio quantum chemical method. The calculations have been performed using the complete active space self‐consistent field method, which is followed by the valence internally contracted multireference configuration interaction (MRCI) approach in combination with the correlation‐consistent aug‐cc‐pV5Z basis set. The effects on the PECs by the core‐valence correlation and relativistic corrections are included. The way to consider the relativistic corrections is to use the third‐order Douglas–Kroll Hamiltonian approximation at the level of a cc‐pV5Z basis set. Core‐valence correlation corrections are performed using the cc‐pCVQZ basis set. To obtain more reliable results, the PECs determined by the MRCI calculations are corrected for size‐extensivity errors by means of the Davidson modification (MRCI+Q). The spectroscopic parameters (D_e, T_e, R_e, ω_e, ω_ex_e, ω_ey_e, B_e, α_e, and γ_e) of these electronic states are calculated using these PECs. The spectroscopic parameters are compared with those reported in the literature. Using the Breit–Pauli operator, the spin–orbit coupling effect on the spectroscopic parameters is discussed for the a³Π electronic state. With the PECs obtained by the MRCI+Q/aug‐cc‐pV5Z+CV+DK calculations, the complete vibrational states of each electronic state have been determined. The vibrational manifolds have been calculated for each vibrational state of each electronic state. The vibrational level G(ν), inertial rotation constant B_ν, and centrifugal distortion constant D_ν of the first 20 vibrational states when the rotational quantum number J equals zero are reported and compared with the experimental data. Comparison with the measurements demonstrates that the present spectroscopic parameters and molecular constants determined by the MRCI+Q/aug‐cc‐pV5Z+CV+DK calculations are both reliable and accurate. © 2012 Wiley Periodicals, Inc.