Ionic liquids coated multi-walled carbon nanotubes as a novel pseudostationary phase in electrokinetic chromatography

A new CE system using ionic liquids coated multi-walled carbon nanotubes (ILs-MWNTs) as pseudostationary phase was developed for the simultaneous determination of four flavonoids, four phenolic acids and two saponins. Several parameters affecting the separation were studied, including the choice of ILs, ILs-MWNTs concentration, the respective use of ILs and MWNTs, buffer pH, SDS concentration and borate content. Results revealed that the addition of ILs-MWNTs in running electrolytes enhanced the separation of target compounds compared to conventional micelle because the surface of carbon nanotubes interacted favorably with the analytes. Under the optimum conditions, a baseline separation was achieved for these analytes within 11 min in a 41.5 cm of effective length fused-silica capillary. At a voltage of 28.0 kV, the separation was carried out in a 10mM borate buffer (pH 9.0) containing 100mM SDS, 6% propanol and 4 μg mL(-1) ILs-MWNTs. All calibration curves showed good linearity (r(2)>0.9990) within the test ranges. The intra- and inter-day precisions as determined from standard solutions were below 3.30% and 6.23%, respectively. The recoveries for ten compounds were found to range from 85.5 to 101.8%. The method was successfully applied for the determination of three types of compounds in Qishenyiqi dropping pills. Our experimental results indicated that the proposed method offered new opportunities for the analysis of complex samples.     

A comparison of ionic liquids to molecular organic solvents as additives for chiral separations in micellar electrokinetic chromatography

In this study, we report the effects of adding ionic liquids (ILs), as compared to adding conventional molecular organic solvents (MOSs), to aqueous buffer solutions containing molecular micelles in the separation of chiral analyte mixtures in micellar EKC (MEKC). The molecular micelle used in this study was polysodium oleyl-L-leucylvalinate (poly-L-SOLV). The ILs were 1-alkyl-3-methylimidazolium tetrafluoroborate, where the alkyl group was ethyl, butyl, hexyl, or octyl. These ILs were chosen due to their hydrophobicity, good solvating, and electrolyte properties. Thus, it was expected that these ILs would have favorable interactions with chiral analytes and not adversely affect the background current. Common CE buffers, mixed with a molecular micelle, and an IL or a MOS, were used for these chiral separations. The buffers containing an IL in the concentration range of 0.02-0.1 v/v were found to support a reasonable current when an electric field strength of 500 V/cm was applied across the capillary. However, a current break down was observed for the buffers containing more than 60% v/v MOS on application of the above-mentioned electric field. The chiral resolution and selectivity of the analytes were dependent on the concentration and type of IL or MOS used.     

Ionic liquids in microemulsions

Ionic liquids (ILs) are being increasingly studied in many different chemical application areas, particularly in green solvent applications that are extending into microemulsion applications. We summarize herein these initial microemulsion formulations and applications where ILs are used as oil substitutes, water substitutes, co-surfactants (additives), and surfactants.     

Ionic liquids as mobile phase additives for determination of thiocyanate and iodide by liquid chromatography

An analytical method was developed for the simultaneous determination of thiocyanate and iodide by reversed‐phase liquid chromatography with UV detection using imidazolium ionic liquids as mobile phase additives. The chromatographic behaviors of the two anions on a C₁₈ column were studied and compared with four types of reagents including imidazolium ionic liquids, pyridinium ionic liquids, 4‐aminophenol hydrochloride and tetrabutylammonium as mobile phase additives. The effects of the concentrations of imidazolium ionic liquids, organic solvents and detection wavelength on separation and detection of the anions were investigated. The role of ionic liquids, retention rules and mechanisms were discussed. The separation of the anions was performed on the C₁₈ reserved‐phase column using acetonitrile‐0.3 mmol/L 1‐amyl‐3‐methylimidazolium tetrafluoroborate (10:90, v/v) as mobile phase, with column temperature of 35°C, flow rate of 1 mL/min and detection wavelength of 210 nm. Under these conditions, the two anions can be completely separated within 6 min. The limits of detection were 0.05 mg/L. The method was applied for the determination of thiocyanate and iodide in ionic liquid samples and iodide drugs, and the spiked recoveries ranged from 97 to 101%. The method is simple, accurate and meets the requirements of quantitative analysis for thiocyanate and iodide.     

Aggregation of phosphate and 1‐tetradecyl‐3‐methylimidazolium chloride background electrolytes during micellar electrokinetic chromatography

We report the possible aggregation of phosphate and ionic liquid (1‐tetradecyl‐3‐methylimidazolium chloride) based BGEs during MEKC. After a certain transit period, the aggregates appear as a random sequence of spikes on a UV detector signal. Root mean square values of the spikes and aggregation time (T_a) were plotted against BGE concentrations. The observation suggests that MEKC is a simple and easy technique for micelle aggregation studies.     

离子液体作高效液相色谱流动相添加剂分离测定芳香胺

建立了以离子液体作反相高效液相色谱流动相添加剂分离测定邻苯二胺、苯胺和对甲苯胺3种芳香胺的方法。实验以C18反相色谱柱为分离柱,采用紫外检测方法,考察了检测波长、甲醇含量、咪唑离子液体烷基链长度、离子液体溶液浓度等条件对分离和测定的影响,并与其它分离测定芳香胺的方法进行了比较。优化的色谱条件为:以甲醇/1-丁基-3-甲基咪唑四氟硼酸盐水溶液(3.0mmol/L,乙酸调节pH 3.5)=30/70(V/V)为流动相;检测波长254 nm;流速1.0mL/min;柱温30℃。在此条件下,3种芳香胺达到基线分离,在6.5 min之内分离完全;在1～40 mg/L范围内,线性回归方程的相关系数达到0.99以上;检出限为0.07～0.41 mg/L。将本方法应用于废水的测定,加标回收率在92.3%～96.7%之间,相对标准偏差小于3.5%。     

Causes and remediation of reduced efficiency in micellar liquid chromatography

Broad peaks are obtained when purely aqueous micellar phases are used in micellar liquid chromatography (MLC). The causes of reduced efficiency in MLC are investigated. Slow solute mass-transfer kinetics between micelles, the aqueous phase and the surfactant covered stationary phase are the origins of the efficiency loss. Knox plots show that the reduced efficiency comes from A term increase and, for lipophilic solutes, A and C terms increases. Surfactant adsorption reduces the pore volume and surface area of the stationary phase changing the flow anisotropy (A term). The surfactant adsorbed layer slows down the mass transfer (C term). Three ways for efficiency loss remediation are known: flow-rate reduction, temperature increase and alcohol addition. Alcohols are known to change the micelle structure and to increase the kinetics of micelle formation-destruction. It is shown that the ratio of the alcohol chain length to surfactant alkyl chain length, C_{n, OH}/C_{nm surf}, should be equal or higher than 1/3 to produce the best efficiency enhancements in MLC. Also, the volume of alcohol to be added is not absolute but relative to the surfactant concentration. The alcohol to surfactant concentration ratio should be kept constant. Temperature increases and especially alcohol additions reduce the retention factors. Thermodynamic and kinetics of the micellar exchanges in MLC cannot be dissociated.     

Determination of preservatives in cosmetics and food samples by micellar liquid chromatography

An analytical procedure has been developed for the analysis of benzoic acid, p-hydroxybenzoic acid, methyl-, ethyl-, propyl-, isopropyl-, and butyl esters of p-hydroxybenzoic acid by micellar liquid chromatography. After dilution in n-propanol the sample was directly injected onto a Lichrosorb ODS, 5 microm (250 x 4.6 mm ID) column and eluted with aqueous 2% Brij-35 adjusted to pH 3.0 with phosphoric acid:propanol (80:20 v/v) at a flow rate of 1 mL min(-1) and UV detection at 254 nm. A linear calibration curve was obtained simultaneously for each component in the range of 50-500 microg mL(-1) for benzoic acid and 5-150 microg mL(-1) for the other components; detection limits were within 25-250 ng mL(-1) corresponding to 125-1250 pg per injection (5 microL). The reproducibility in terms of average peak area and average retention time was obtained with coefficients of variation (CV) of 1.2% and 0.5%. The method was applied to analysis of these compounds in cosmetics (shampoos, hand lotions, creams, and bath foam) and food samples.     

Ionic liquids as mobile phase additives in high-performance liquid chromatography with electrochemical detection: Application to the determination of heterocyclic aromatic amines in meat-based infant foods

The beneficial effects of several ionic liquids (ILs) as mobile phase additives in high-performance liquid chromatography with electrochemical detection for the determination of six heterocyclic aromatic amines (HAs) have been evaluated for first-time. The studied ionic liquids were 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF₄), 1-hexyl-3-methylimidazolium tetrafluoroborate (HMIm-BF₄) and 1-methyl-3-octylimidazolium tetrafluoroborate (MOIm-BF₄). Several chromatographic parameters have been evaluated in the presence or absence of ILs, or using ammonium acetate as the most common mobile phase additive, with three different C18 stationary phases. The effect of the acetonitrile content was also addressed. In general, best resolution, lower peak-widths (up to 72.1% lower) and lower retention factors are obtained when using ILs rather than ammonium acetate as mobile phase additives. The main improvement was obtained in the baseline noise, being 360% less noisy for BMIm-BF₄, 310% for HMIm-BF₄, and 227% for MOIm-BF₄, when compared to ammonium acetate at +1000 mV. Different chromatographic methods using the best conditions for each IL were also evaluated and compared. Finally, the best chromatographic conditions using 1 mM of BMIm-BF₄ as mobile phase additive, the Nova-Pak^® C18 column, 19% (v/v) of acetonitrile content in the mobile phase, and +1000 mV in the ECD, have been applied for the chromatographic analysis of six HAs contained in meat-based infant foods. The whole extraction method of meat-based infant foods using focused microwave-assisted extraction and solid-phase extraction has also been optimized. Extraction efficiencies up to 89% and detection limits ranged between 9.30 and 0.165 ng g⁻¹ have been obtained under optimized conditions.     

Ionic liquids as silica deactivating agents in gas chromatography for direct analysis of primary amines in water

Analysis of primary amines in aqueous samples remains a challenging analytical issue. The preferred approach by gas chromatography is hampered by interactions of free silanol groups with the highly reactive amine groups, resulting in inconsistent measurements. Here, we report a method for direct analysis of aliphatic amines and diamines in aqueous samples by gas chromatography (GC) with silanol deactivation using ionic liquids (ILs). ILs including trihexyl(tetradecyl)phosphonium bis 2,4,4-(trimethylpentyl)phosphinate (Cyphos IL-104), 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide [pmim][Tf(2)N] and N″-ethyl-N,N,N',N'-tetramethylguanidinium tris(pentafluoroethyl)trifluorophosphate [etmg][FAP] were tested as deactivating media for the GC liner. Solutions of these ILs in methanol were injected in the system prior to the analysis of primary amines. Butane-1,4-diamine (putrescine, BDA) was used as a reference amine. The best results were obtained using the imidazolium IL [pmim][Tf(2)N]. With this deactivator, excellent reproducibility of the analysis was achieved, and the detection limit of BDA was as low as 1mM. The applicability of the method was proven for the analysis of two different primary amines (C4-C5) and pentane-1,5-diamine.     

Determination of catecholamines as aminochromes by micellar liquid chromatography with thermal lens spectrophotometric detection

Summary The determination of catecholamines (CAs) using micellar liquid chromatography with thermal lens spectrophotometric detection has been studied. CAs are oxidized with hexacyanoferrate(III) to aminochromes which are separated with a mobile phase of 0.05 M sodium dodecyl sulphate, 7% propanol and 0.03 M citrate buffer, pH 4.8, on a partially endcapped C₁₈ column. The aminochrome-micelles and aminochrome-stationary phase association constants are evaluated. Using the 488 nm line of an Ar⁺ laser with 250 mW pump power the limits of detection are about 4 ng mL^–1. The technique is applied to the determination of unconjugated CAs in urine using isoproterenol as internal standard.     

Determination of some banned stimulants in sports by micellar liquid chromatography

Summary A procedure has been developed for the determination, in <12 min, of several stimulants (amphetamine, ephedrine, methoxyphenamine, phenylephrine and phenylpropanolamine) in spiked urine samples after direct injection, using a hybrid micellar mobile phase of 0.15 M sodium dodecyl sulfate and 3% pentanol at pH 7, on a C₁₈ column with UV detection. Recoveries were 94–102% and limits of detection 4.5 ng·mL⁻¹ for methoxyphenamine and 0.39 μg·mL⁻¹ for amphetamine, similar to those obtained for aqueous solutions. Linearity reached 0.99 and intermediate precision was <8.4 and 5.3, for the two different concentrations tested.     

Evaluation of distribution coefficients in micellar liquid chromatography

The possibilities of micellar liquid chromatography for evaluating distribution coefficients are discussed. Determination of solute-micelle association constants and distribution coefficients of solutes between stationary-aqueous, stationary-micellar and aqueous-micellar phases is described. Application of the calculation of distribution coefficients to the study of the retention mechanism of solutes in the chromatographic system and prediction of separation selectivity is also presented.     

Ionic liquid stationary phases for gas chromatography

This article provides a summary of the development of ionic liquids as stationary phases for gas chromatography beginning with early work on packed columns that established details of the retention mechanism and established working methods to characterize selectivity differences compared with molecular stationary phases through the modern development of multi-centered cation and cross-linked ionic liquids for high-temperature applications in capillary gas chromatography. Since there are many reviews on ionic liquids dealing with all aspects of their chemical and physical properties, the emphasis in this article is placed on the role of gas chromatography played in the design of ionic liquids of low melting point, high thermal stability, high viscosity, and variable selectivity for separations. Ionic liquids provide unprecedented opportunities for extending the selectivity range and temperature-operating range of columns for gas chromatography, an area of separation science that has otherwise been almost stagnant for over a decade.     

Modelling of retention behaviour of solutes in micellar liquid chromatography

In micellar liquid chromatography (MLC), the resolution for a given multi-component mixture can be optimized by changing several variables, such as the concentrations of surfactant and organic modifier, the pH and temperature. However, this advantage can only be fully exploited with the development of mathematical models that describe the retention and the separation mechanisms. Several reports have appeared recently on the possibilities of accurately predicting the solute retention in MLC. Although the retention and selectivity may strongly change with varying concentrations of surfactant, organic modifier and/or pH, the observed changes are very regular, and are well described by simple models. This characteristic enables a successful prediction of retention times and compensates the negative effect of the broad and tailed chromatographic peaks obtained for some solutes when micellar eluents are used. An overview of the models proposed in the literature to describe the retention behaviour in pure micellar eluents and micellar eluents containing an organic modifier, at a fixed pH or at varying pH, is given. The equations derived permit the evaluation of the strength of micelle-solute and stationary phase-solute interactions. The prediction of the retention based on molecular properties and the use of neural networks, together with the factors affecting the prediction capability of the models (linearization of the equations, dead time, critical micellar concentration, ionic strength and temperature) are commented on. The strategies used for the optimization of resolution are also given.     

Simultaneous isocratic separation of phenolic acids and flavonoids using micellar liquid chromatography

The simultaneous isocratic separation of a mixture of five phenolic acids and four flavonoids (two important groups of natural polyphenolic compounds with very different polarities) was investigated in three different RPLC modes using a hydro‐organic mobile phase, and mobile phases containing SDS at concentrations below and above the critical micellar concentration (submicellar LC and micellar LC (MLC), respectively). In the hydro‐organic mode, methanol and acetonitrile; in the submicellar mode methanol; and in the micellar mode, methanol and 1‐propanol were examined individually as organic modifiers. Regarding the other modes, MLC provided more appropriate resolutions and analysis time and was preferred for the separation of the selected compounds. Optimization of separation in MLC was performed using an interpretative approach for each alcohol. In this way, the retention of phenolic acids and flavonoids were modeled using the retention factors obtained from five different mobile phases, then the Pareto optimality method was applied to find the best compatibility between analysis time and quality of separation. The results of this study showed some promising advantages of MLC for the simultaneous separation of phenolic acids and flavonoids, including low consumption of organic solvent, good resolution, short analysis time, and no requirement of gradient elution.     

Comparison of C18 silica bonded phases selectivity in micellar liquid chromatography

The paper describes a new test designed in micellar LC (MLC) to compare the commercial C18 stationary phase properties. This test provides the total hydrophobicity, hydrophilicity, steric selectivity, hydrogen bonding, and ion‐exchange capacity properties calculation of the ODS stationary phases. Both the test compounds and chromatographic separation conditions choice for column characterization in MLC are detailed. The chromatographic performance of several stationary phases that are used in MLC was evaluated with specific chromatographic test comprising nine test compounds, possessing different physico‐chemical properties, which were injected on different supports with two micellar mobile phases: one at pH 7.0 (0.075 mol/L SDS and 1.5% v/v 1‐pentanol), and other at pH 2.7 (0.075 mol/L SDS and 1.5% v/v 1‐pentanol adjusted to pH by TFA). Fundamental column chromatographic properties were obtained under these conditions and were treated by hierarchical cluster analysis. From the results of cluster analysis, two closely related groups of columns are distinguished, and it was shown that the chosen column characteristic parameters allow characterizing both sorbent and micellar chromatographic system properties. Eleven columns were analyzed by this test, which allows a comparison of columns with the aim of the selection of suitable and analogous column for the analysis with MLC.     

Reduction of silanophilic interactions in liquid chromatography with the use of ionic liquids

A suppression of silanophilic interactions by the selected ionic liquids added to the mobile phase in thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC) is reported. Acetonitrile was used as the eluent, alone or with various concentrations of water and phosphoric buffer pH 3. Selectivity of the normal (NP) and the reversed (RP) stationary phase material was examined using a series of proton-acceptor basic drugs analytes. The ionic liquids studied appeared to significantly affect analyte retention in NP-TLC, RP-TLC and RP-HPLC systems tested. Consequently, the increased separation selectivity was attained. Due to ionic liquid additives to eluent even analytes could be chromatographed, which were not eluted from the silica-based stationary phase materials with 100% of acetonitrile in the mobile phase. Addition of ionic liquid already in very small concentration (0.5%, v/v) could reduce the amount of acetonitrile used during the optimization of basic analytes separations in TLC and HPLC systems. Moreover, the influence of temperature on the separation of basic analytes was demonstrated and considered in practical HPLC method development.     

Determination of sulfonamides in milk after precolumn derivatisation by micellar liquid chromatography

A simple method to identify and determine six sulfonamides (sodium sulfacetamide, sulfamethizole, sulfaguanidine, sulfamerazine, sulfathiazole and sulfamethoxazole) in milk by micellar liquid chromatography (MLC) is reported. The assay makes use of a precolumn diazotisation-coupling derivatisation including the formation of an azo dye that can be detected at 490 nm. Furthermore, the use of MLC as an analytical tool allows the direct injection of non-purified samples. The separation was performed with an 80 mM SDS-8.5% propanol eluent at pH 7. Analysis times are below 16 min with a complete resolution. Linearities (r > 0.9999), as well as intra- and inter-day precision (below 2.7%), were studied in the validation of the method. The limits of detection and quantification ranged from approximately 0.72 to 0.94 and 2.4 to 3.1 ng mL⁻¹, respectively. The detection limit was below the maximum residue limit established by the European Community. Finally, recoveries in spiked milk samples were in the 83-103% range.