Application of bromoacetate‐substituted β‐CD‐bonded silica particles as chiral stationary phase for HPLC

Bromoacetate‐substituted [3‐(2‐O‐β‐cyclodextrin)‐2‐hydroxypropoxy]propylsilyl‐appended silica particles (BACD‐HPS), an important and useful synthetic intermediate for preparation of novel types of macrocycles‐capped β‐CD‐bonded silica particles including crown ether/cyclam/calix[4]arene‐capped β‐CD‐bonded silica particles, have been prepared and used as chiral stationary phase for HPLC. This synthetic stationary phase is characterized by means of elemental analysis. For the first time, the chromatographic behavior of BACD‐HPS was systematically evaluated with several disubstituted benzenes and some chiral drug compounds under both normal and RP conditions in HPLC. The results show that BACD‐HPS has excellent selectivity for the separation of aromatic positional isomers and chiral isomers of some drug compounds when used as stationary phase in HPLC.     

Enantiomeric Separations in Capillary Electrochromatography with Crown Ether‐Capped β‐Cyclodextrin‐Bonded Silica Particles as Chiral Stationary Phase

Two novel types of crown ether capped β‐cyclodextrin (β‐CD) bonded silica, namely, 4′‐aminobenzo‐X‐crown‐Y (X=15, 18 and Y=5, 6, resp.) capped [3‐(2‐O‐β‐cyclodextrin)‐2‐hydroxypropoxy] propylsilyl‐appended silica, have been prepared and used as stationary phases in capillary electrochromatography (CEC) to separate chiral compounds. The two stationary phases have a chiral selector with two recognition sites: crown ether and β‐CD. They exhibit excellent enantioselectivity in CEC for a wide range of compounds. After inclusion of metal ions (Na⁺ or K⁺) from the running buffer into the crown ether units, the stationary phases become positively charged and can provide extra electrostatic interaction with ionizable solutes and enhance the dipolar interaction with polar neutral solutes. This enhances the host‐guest interaction with the solute and improves chiral recognition and enantioselectivity. Due to the cooperation of the anchored β‐CD and the crown ether, this kind of crown ether capped β‐CD bonded phase shows better enantioselectivity than either β‐CD‐ or crown ether bonded phases only. These new types of stationary phases have good potential for fast chiral separation with CEC.     

Preparation and evaluation of monodispersed,submicron, non‐porous silica particles functionalized with β‐CD derivatives for chiral‐pressurized capillary electrochromatography

Submicron, non‐porous, chiral silica stationary phase has been prepared by the immobilization of functionalized β‐CD derivatives to isocyanate‐modified silica via chemical reaction and applied to the pressurized capillary electrochromatography (pCEC) enantio‐separation of various chiral compounds. The submicron, non‐porous, cyclodextrin‐based chiral stationary phases (sub_μm‐CSP2) exhibited excellent chiral recognition of a wide range of analytes including clenbuterol hydrochloride, mexiletine hydrochloride, chlorpheniramine maleate, esmolol hydrochloride, and metoprolol tartrate. The synthesized submicron particles were regularly spherical and uniformly non‐porous with an average diameter of around 800 nm and a mean pore size of less than 2 nm. The synthesized chiral stationary phase was packed into 10 cm × 100 μm id capillary columns. The sub_μm‐CSP2 column used in the pCEC system showed better separation of the racemates and at a higher rate compared to those used in the capillary liquid chromatography mode (cLC) system. The sub_μm‐CSP2 possessed high mechanical strength, high stereoselectivity, and long lifespan, demonstrating rapid enantio‐separation and good resolution of samples. The column provided an efficiency of up to 170 000 plates/m for n‐propylbenzene.     

Use of Chemically Bonded β‐Cyclodextrin Silica Stationary Phase for Liquid Chromatographic Separation of Structural Isomers

The retention behavior of five disubstituted benzene derivatives and two naphthalene derivatives is examined by using a chemically bonded β‐cyclodextrin silica stationary phase with the moiety containing the s‐triazine. The chromatographic results of five disubstituted benzene derivatives and two naphthalene derivatives show that effective separation is achieved on this stationary phase by high‐performance liquid chromatography. The results of the present investigation indicate that the formation of inclusion complexes plays a dominant role in the separation mechanism. However, the selectivity can be significantly enhanced by the n‐n interactions between the s‐triazine ring of the chemically bonded β‐cyclodextrin silica stationary phase and the aromatic ring of solutes. For example, the effective separation of the o‐, m‐, and p‐toluidine isomers on this stationary phase with the moiety containing the s‐triazine ring was better than on that of some β‐cyclodextrin bonded stationary phases without the moiety containing s‐triazine ring.     

固相β-环糊精包结物诱导7-羟基-2-甲氧基-2-甲基色满的不对称合成

研究了室温下间苯二酚和甲基乙烯基酮分别与β-环糊精（ β-CD）形成包结物后的几种不同固相反应,结果表明包结物A（间苯二酚/β-CD）与包结物B（甲基乙烯基酮/β-CD）反应能够很好地得到目的产物,产率及ee值分别为82.8%和78.4%;间苯二酚与包结物B反应仅得到低光学活性产物（ee值为19.5%）;包结物A与甲基乙烯基酮反应却没有得到手性目的产物。以熔点、X-粉末衍射、固相核磁碳谱及ROESY多种方法对所形成的包结物进行了表征,包结物中主客体的比例（1：1）通过¹H NMR (400 MHz)得以确定,文章对固相环加成反应的机制也进行了初步探讨。     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Preparation and characterization of poly(ethylene oxide)‐loaded hydroxypropyl‐β‐cyclodextrin nanofibers

Hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) is a modified β‐cyclodextrin (β‐CD) derivative, which is toxicologically harmless to mammals and other animals. HP‐β‐CD is electrospun from an aqueous solution by blending with a non‐toxic, biocompatible, synthetic polymer poly(ethylene oxide) (PEO). Aqueous solutions containing different HP‐β‐CD/PEO blends (50:50–80:20) with variable concentrations (4 wt%–12 wt%) were used. Scanning electron microscope was used to investigate the morphology of the fibers, and Fourier transform infrared spectroscopy analysis confirmed the presence of HP‐β‐CD in the fiber. Uniform nanofibers with an average diameter of 264, 244, and 236 nm were obtained from 8 wt% solution of 50:50, 60:40, and 70:30 HP‐β‐CD/PEO, respectively. The average diameter of the fiber was decreased with increasing of HP‐β‐CD/PEO ratio. However, a higher proportion of HP‐β‐CD in the spinning solution increased beads in the fibers. The polymer concentration had no significant effect on the fiber diameter. The most uniform fibers with the narrowest diameter distribution were obtained from the 8 wt% of 50:50 solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d‐maltosyl‐β‐cyclodextrin

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin were synthesized using functionalized silica as a matrix, 4‐(phenyldiazenyl)phenol as a light‐sensitive monomer, and 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin as a template. Fourier transform infrared spectroscopy results indicated that 4‐(phenyldiazenyl)phenol was grafted onto the surface of functionalized silica. The obtained imprinted polymers exhibited specific recognition toward 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin. Equilibrium binding experiments showed that the photoirradiation surface molecularly imprinted polymers obtained the maximum adsorption amount of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin at 20.5 mg/g. In binding kinetic experiments, the adsorption reached saturation within 2 h with binding capacity of 72.8%. The experimental results showed that the adsorption capacity and selectivity of imprinted polymers were effective for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin, indicating that imprinted polymers could be used to isolate 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin from a conversion mixture containing β‐cyclodextrin and maltose. The results showed that the imprinted polymers prepared by this method were very promising for the selective separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin.     

Electrochemical Investigation of Myoglobin in Layer‐by‐Layer Films Assembled with Sulfonated‐β‐Cyclodextrin

In this work, myoglobin (Mb) and sulfonated‐β‐cyclodextrin (S‐CD) were assembled into {S‐CD/Mb}_n layer‐by‐layer films on solid substrates. In pH 7.0 buffers, the {S‐CD/Mb}_n films assembled on electrodes showed a pair of well‐defined and nearly reversible CV peaks at about ?0.35 V vs. SCE. The stable CV response of {S‐CD/Mb}_n films could be used to electrocatalyze reduction of oxygen and hydrogen peroxide in solution. For comparison, another modified β‐cyclodextrin, carboxyethyl‐β‐cyclodextrin (C‐CD), was also assembled with Mb into {C‐CD/Mb}_n multilayer films. The driving forces of the assembly were explored and discussed.     

Synthesis and Silica‐Based Immobilization of Monofunctionalized Heptakis(2,6‐di‐O‐methyl‐3‐O‐pentyl)‐β‐cyclodextrin for Enantioselective Capillary‐HPLC

Heptakis(2,6‐di‐O‐methyl‐3‐O‐pentyl)‐β‐cyclodextrin was monofunctionalized by the regioselective introduction of exactly one ω‐epoxyoctyl group at the primary site of the cyclodextrin. The site‐specifically substituted cyclodextrin was immobilized to commercially available aminopropyl silica by nucleophilic opening of the epoxy function of the spacer substituent resulting in a lipophilic chiral stationary phase with broad applicability for enantiomer separations in capillary‐HPLC under reversed‐phase conditions.     

Mass spectrometry characterization of 3‐OH butyrated β‐cyclodextrin

Oligo(3‐OH butyrate)‐β‐cyclodextrin esters (PHB‐CD) were obtained through ring opening of β‐butyrolactone (β‐BL) in the presence of β‐cyclodextrin (CD) and (‐)‐sparteine (SP) as nucleophilic activator. The resulted reaction mixture was first separated in two fractions and then investigated through a deep mass spectrometry (MS) study performed on a liquid chromatography‐electrospray ionization‐quadrupole time of flight (LC‐ESI‐QTOF) instrument. LC MS and tandem MS structural assignment of the reaction products was completed by NMR. The performed analysis revealed that poly(3‐OH butyrate) homopolymers (PHB) are formed together with the PHB‐CD products. Secondary reactions resulting in the formation of crotonates were also proved to occur. A comparison between MS and NMR results demonstrated that more than one PHB oligomer is attached to the CD in the PHB‐CD product. The tandem MS fragmentation studies validated the proposed structure of CD derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Electrospray ionization mass spectrometry studies of cyclodextrin‐carboxylate ion inclusion complexes

Aqueous solutions containing simple model aliphatic and alicyclic carboxylic acids (surrogates 1–4) were studied using negative ion electrospray mass spectrometry (ESI‐MS) in the presence and absence of α‐, β‐, and γ‐cyclodextrin. Molecular ions were detected corresponding to the parent carboxylic acids and complexed forms of the carboxylic acids; the latter corresponding to non‐covalent inclusion complexes formed between carboxylic acid and cyclodextrin compounds (e.g., β‐CD, α‐CD, and γ‐CD). The formation of 1:1 non‐covalent inclusion cyclodextrin‐carboxylic complexes and non‐inclusion forms of the cellobiose‐carboxylic acid compounds was also observed. Aqueous solutions of Syncrude‐derived mixtures of aliphatic and alicyclic carboxylic acids (i.e. naphthenic acids; NAs) were similarly studied using ESI‐MS, as outlined above. Molecular ions corresponding to the formation of CD‐NAs inclusion complexes were observed whereas 1:1 non‐inclusion forms of the cellobiose‐NAs complexes were not detected. The ESI‐MS results provide evidence for some measure of inclusion selectivity according to the 'size‐fit' of the host and guest molecules (according to carbon number) and the hydrogen deficiency (z‐series) of the naphthenic acid compounds. The relative abundances of the molecular ions of the CD‐carboxylate anion adducts provide strong support for differing complex stability in aqueous solution. In general, the 1:1 complex stability according to hydrogen deficiency (z‐series) of naphthenic acids may be attributed to the nature of the cavity size of the cyclodextrin host compounds and the relative lipophilicity of the guest. Copyright © 2009 John Wiley & Sons, Ltd.     

The degree of substitution affects the enantioselectivity of sulfobutylether‐β‐cyclodextrin chiral stationary phases

Three chiral stationary phases were prepared by dynamic coating of sulfobutylether‐β‐cyclodextrin (SBE‐β‐CD) with different degrees of substitution, onto strong anion‐exchange stationary phases. The enantioselective potential and stability of newly prepared chiral stationary phases were examined using a set of structurally different chiral analytes. Measurements were performed in RP‐HPLC. Mobile phases consisted of methanol/formic acid, pH 2.10, and methanol/10 mM ammonium acetate buffer, pH 4.00, in various volume ratios. SBE‐β‐CDs with degrees of substitution (DS) 4, 6.3, and 10 proved suitable for the enantioseparation of 14, 11, and 8 analytes, respectively. The SBE‐β‐CD DS 4 based chiral stationary phase enabled the enantioseparation of the nearly all basic and neutral compounds. Chiral stationary phases with higher sulfobutylether‐β‐cyclodextrin substitution (especially DS 10) yielded higher enantioresolution values for acidic compounds.     

Gas phase isomeric differentiation of oleanolic and ursolic acids associated with heptakis‐(2,6‐di‐O‐methyl)‐β‐cyclodextrin by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

Oleanolic acid (OA) and ursolic acid (UA) are isomeric triterpenoid compounds with similar pharmaceutical properties. Usually, modern chromatographic and electrophoretic methods are widely utilized to differentiate these two compounds. Compared with mass spectrometric (MS) methods, these modern separation methods are both time‐ and sample‐consuming. Herein, we present a new method for structural differentiation of OA and UA by Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR MS) with the association of heptakis‐(2,6‐di‐O‐methyl)‐β‐cyclodextrin (DM‐β‐CD). Exact MS and tandem MS (MS/MS) data showed that there is no perceptible difference between OA and UA, as well as their β‐cyclodextrin and γ‐cyclodextrin complexes. However, there is a remarkable difference in MS/MS spectra of DM‐β‐CD complexes of OA and UA. The peak corresponding to the neutral loss of a formic acid and a water molecule could only be observed in the MS/MS spectrum of the complex of DM‐β‐CD : OA. Molecular modeling calculations were also employed to further investigate the structural differences of DM‐β‐CD : OA and DM‐β‐CD : UA complexes. Therefore, by employing DM‐β‐CD as a reference reagent, OA and UA could be differentiated with purely MS method. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of chiral oxazolinyl‐functionalized β‐cyclodextrin‐bonded stationary phases and their enantioseparation performance in high‐performance liquid chromatography

A simple procedure for the synthesis of three new oxazolinyl‐substituted β‐cyclodextrins (6‐deoxy‐6‐R‐(–)‐4‐phenyl‐4,5‐dihydrooxazolinyl‐β‐cyclodextrin, 6‐deoxy‐6‐S‐(–)‐4‐phenyl‐4,5‐dihydrooxazolinyl‐β‐cyclodextrin, and 6‐deoxy‐6‐S‐(–)‐(4‐pyridin‐1‐ium‐4‐methyl‐benzenesulphonate)‐4,5‐dihy‐drooxazolinyl‐β‐cyclodextrin) and their covalent bonding to silica are reported. The ability of these chiral stationary phase columns for separating compounds is also presented and discussed. Twenty‐eight compounds were examined in the polar‐organic mobile phase mode, and 11 β‐nitroethanols were tested in the reversed‐phase mode. Excellent enantioseparations were achieved for most of the analytes, even for several challenging compounds. The rigid and flexible structures of mono‐substituted chiral groups and the fragments around the rim of the β‐cyclodextrin cavity played an important role in the separation process. Factors such as π–π stacking, dipole–dipole interactions, ion‐pairing, and steric hindrance effects were found to affect the chromatographic performance. Moreover, the buffer composition, and percentages of organic modifiers in the mobile phase, were investigated and compared. The mechanisms involved in the separation were postulated based on the chromatographic data.     

Separation and Retention Behavior of Aromatic Carboxylic Acid Isomers by High‐Performance‐Liquid‐Chromatography Using β‐Cyclodextrin Bonded Phase with Diamine‐s‐Triazine Moiety

A β‐cyclodextrin (β‐CD) bonded phase with diamine‐s‐triazine moiety was prepared. The separation and retention behavior of the isomers of five aromatic carboxylic acids, including toluic acid, aminobenzoic acid, nitrobenzoic acid, hydroxybenzoic acid, and naphthoic acid were investigated by a high‐performance liquid chromatography (HPLC) using the β‐CD bonded phase prepared. The influence of mobile phase pH in the range of 2.7‐3.6 on the retention of these analytes was examined. The isomers of the aromatic carboxylic acids, with the exception of nitrobenzoic acid, were optimally and effectively separated at pH 2.7, while the three isomers of nitrobenzoic acid could be well separated at pH 3.3. Compared with the chromatographic results obtained previously on the amine‐s‐triazine‐β‐CD bonded phase, the retention factors of the isomers of aromatic carboxylic acid on the diamine‐s‐triazine‐β‐CD bonded phase increase to a relatively much greater extent. Thus, the functionality of the spacer arm of the bonded phase playing an important role in the retention of aromatic carboxylic acid isomers is demonstrated. The results also imply that the hydrogen‐bonding interaction and the mechanism of anion exchange sorption as well may contribute significantly to the retention mechanisms.     

Self‐Assembled Submonolayer of β‐Cyclodextrins on Gold Electrode for the Selective Determination of 4‐Aminobiphenyl

The formation of an inclusion complex between 4‐aminobiphenyl (4‐AB) and β‐cyclodextrin molecules (β‐CD), allows the use of thiolated β‐CDs as chemi‐adsorbed material on a Au electrode as a self‐assembled submonolayer for the selective square wave voltammetric determination of 4‐AB. The submonolayer was characterized by reductive desorption and an association constant of 1.2×10⁴ L/mol was obtained. The optimization of variables yielded a linear dependence of ip/4‐AB concentration in the range of 10^?5 to 10^?4 mol/L. The selectivity of the method was evaluated in the presence of other aromatic amines obtaining better results with the modified electrode. This methodology was applied to the voltammetric determination of 4‐AB in wastewater samples.     

Noncovalently connected micelles based on a β‐cyclodextrin‐containing polymer and adamantane end‐capped poly(ε‐caprolactone) via host–guest interactions

New random copolymers, poly(N‐vinyl‐2‐pyrrolidone‐co‐mono‐6‐deoxy‐6‐methacrylate ethylamino‐β‐cyclodextrin) (PnvpCD) bearing pendent β‐cyclodextrin (CD) groups were synthesized. PnvpCD formed soluble graft‐like polymer complex with adamantane (AD) end‐capped poly(ε‐caprolactone) (PclAD) in their common solvent N‐methyl‐2‐pyrrolidone driven by the inclusion interactions between the CD and AD groups. The formation of the graft complex has been confirmed by viscometry, dynamic light scattering (DLS), and isothermal titration calorimeter. The graft complex self‐assembled further into noncovalently connected micelles in water, which is a selective solvent for the main chain PnvpCD. Transmission electron microscopy, DLS, and atomic force microscopy have been used to investigate the structure and morphology of the resultant micelles. A unique “multicore” structure of the micelles, in which small PclAD domains scattered within the micelles, was obtained under nonequilibrium conditions in the preparation. However, the micelles prepared in a condition close to equilibrium possess an ordinary core‐shell structure. In both cases, the core and shell are believed to be connected by the AD‐CD inclusion complexation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4267–4278, 2009     

A new single‐urea‐bound 3,5‐dimethylphenylcarbamoylated β‐cyclodextrin chiral stationary phase and its enhanced separation performance in normal‐phase liquid chromatography

A new single‐urea‐bound chiral stationary phase based on 3,5‐dimethylphenylcarbamoylated β‐cyclodextrin was prepared through the Staudinger reaction of mono (6^A‐azido‐6^A‐deoxy)‐per(3,5‐dimethylphenylcarbamoylated) β‐cyclodextrin and 3‐aminopropyl silica gel under CO₂ atmosphere. The new phase exhibited good enantioseparation performance for 33 analytes using normal‐phase HPLC conditions; 19 of them were baseline separated. Effects of structure of analytes, alcoholic modifiers, and acidic/basic additives on separation performances of this new cyclodextrin chiral stationary phase have been studied in detail. The results showed that the retention and resolution of acidic and basic analytes on the CSP were greatly affected by the additives. Peak symmetry for some analytes could be improved by simultaneously adding acidic and basic additives to the mobile phase. This work expands the potential applications of the cyclodextrin‐based chiral stationary phases in the normal‐phase HPLC.     

Preparation and adsorption of novel cellulosic fibers modified by β‐cyclodextrin

Novel cellulosic fibers modified by β‐cyclodextrin (CFEC) were prepared for adsorption for heavy metal ions like copper (II) and organic dye like neutral red from their aqueous solutions. The modified cellulosic fibers gave higher copper ion adsorption, and showed copper ion uptake values of 6.24 mg/g at 293°C, as against no adsorption for unmodified cellulosic fibers. Adsorption isotherm model indicated the adsorption of the novel modified fibers for heavy metal ions best fitted for Langmiur model. The adsorption was an exothermic reaction, and the reaction caloric was 6.295 kJ/mol. Copper ions could form a 7:4 complex with β‐cyclodextrin (β‐CD). The novel modified cellulosic fibers could also form inclusion complexes with neutral red via β‐CD molecules. In addition, it was found that the novel modified cellulosic fibers had nearly the same mechanical and thermal properties as the unmodified cellulosic fibers because the modification did not destroy the main chain of cellulose molecules. Copyright © 2008 John Wiley & Sons, Ltd.