A new ultra-high pressure liquid chromatography method for the determination of antioxidant flavonol aglycones in six Lysimachia species

UPLC-DAD method was developed and validated for the quantitative determination of free flavonol aglycones (kaempferol, quercetin and myricetin) after acidic hydrolysis in six Lysimachia species. Quantitative analyses showed that the amounts of various flavonol aglycones were significantly different in Lysimachia vulgaris, Lysimachia nummularia, Lysimachia punctata, Lysimachia christinae, Lysimachia ciliata and Lysimachia clethroides. The L. clethroides sample was found to be the richest in kaempferol (25.77 ± 1.29 μg/mg extract) and quercetin (97.67 ± 4.61 μg/mg extract), while the L. nummularia sample contained the highest amount of myricetin (20.79 ± 1.00 μg/mg extract). The antioxidant capacity of hydrolysed extracts was evaluated using in vitro DPPH^? (2,2-diphenyl-1-picrylhydrazyl) and ABTS^?+ [2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic acid)] decolourisation tests. The observed radical scavenging capacities of the extracts showed a relationship with the measured flavonol aglycone content and composition. The acidic treatment resulted in an increased free radical scavenging activity compared to the untreated methanol extract.     

Determination of Chlorogenic Acid and Rutinum in Herba Artemisiae Scopariae with Multitemplate Molecularly Imprinted Polymers for Solid-phase Extraction with High-performance Liquid Chromatography

Novel multitemplate molecularly imprinted polymers were prepared using mixtures of chlorogenic acid and rutinum as molecular templates, acrylamide as a functional monomer, divinylbenzene as the cross-linker, and 20:80 methanol:acetone as the porogen. The polymers were assessed for solid-phase extraction (SPE) for the purification of two compounds from Herba Artemisiae Scopariae. The synthesized molecularly imprinted polymers were identified by infrared spectroscopy and scanning electron microscopy. Systematic characterization of the functional monomer and porogens on the recognition properties of the molecularly imprinted polymers were carried out. Comparison with single-template molecularly imprinted polymers showed that the multitemplate molecular polymers exhibited higher selectivity and adsorption capacity for multiple analytes. The optimization of washing solvent as 1:9 acetone:water and the elution solvent as 9:1 acetonitrile:acetic acid provided a reliable analytical method with strong recognition toward multiple analytes in Herba Artemisiae Scopariae extracts with satisfactory recoveries of 89.6% for chlorogenic acid and 93.8% for rutinum. These results demonstrate that the multitemplate molecularly imprinted polymers coupled with SPE are effective for the selective purification of bioactive compounds in complex samples.     

Investigation of phenolic antioxidants as chemical markers in extracts of Connarus perrottetii var. Angustifolius Radlk by capillary zone electrophoresis

Plant roots, leaves, barks, seeds berries, or flowers can be used to promote health and treat diseases and also have compounds that provide information about the best quality of raw materials. A medicinal plant native to the Amazonia region (Brazil) was investigated in this work. For this purpose, a new analytical approach was developed by capillary zone electrophoresis (CZE) with UV detection for the separation of 14 phenolic compounds extracted from the plant extracts. The method enabled simultaneous determination of 3-acetylcoumarin, resveratrol, 6-hydroxycoumarin, catechin, rutin, ferulic acid, quercitrin, kaempferol, fisetin, myricetin, quercetin, caffeic acid, gallic acid, and 4-hydroxycinnamic acid using borate buffer (20 mM, pH 9.2) containing 15% methanol (v/v) as working electrolyte, separation potential of ?20 kV, separation temperature of 25°C and hydrodynamic injection by gravity (20 cm for 60 s). The developed method was validated, obtaining repeatability and inter-day precision values lower than 7% and 6%, respectively. Recovery was performed and ranged from 84% to 118%. The method permitted the quantification of catechin and rutin in Connarus perrottetii var. angustifolius aqueous infusions, ethanolic extracts, and butanolic extracts (both obtained after maceration). The radical scavenging activity of the extracts toward free radicals is also described.     

利用分子烙印技术分离中草药活性组分

用非共价法,在极性溶剂中,以丙烯酰胺作功能单体,以强极性化合物槲皮素为模板 ,制备了分子烙印聚合物(MIP). 液相色谱实验表明, MIP 对槲皮素具有特异的亲合性.将此 MIP直接分离银杏叶提取物水解液, 得到主要含模板槲皮素及与槲皮素结构相似化合物山奈 酚两种黄酮的组分.研究证实了MIP技术用于直接分离、提取中草药中具有特定药效化合物的 可行性.     

Molecularly imprinted polymers for the selective extraction of tiliroside from the flowers of Edgeworthia gardneri (wall.) Meisn

Nano‐sized molecularly imprinted polymers for tiliroside were successfully prepared by a precipitation polymerization method. Acrylamide, ethylene glycol dimethacrylate, azobisisobutyronitrile, and acetonitrile/dimethyl sulfoxide were used as functional monomer, cross‐linker, initiator, and porogen, respectively. The structural features and morphological characterization of tiliroside‐imprinted polymers were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The adsorption experiments indicated that the tiliroside‐imprinted polymers exhibited high selective recognition property to tiliroside. Scatchard analysis indicated that the homogeneous‐binding sites were formed in the polymers. The selectivity test revealed that the adsorption capacity and selectivity of polymers to tiliroside was significantly higher than that of rutin, astragalin, and kaempferol. Finally, the tiliroside‐imprinted polymers were employed as adsorbents in solid‐phase extraction for the extraction of tiliroside from the ethyl acetate extract of the flowers of Edgeworthia gardneri (wall.) Meisn. The results demonstrated that the extraction recoveries of tiliroside ranged from 69.3 to 73.5% by using tiliroside‐imprinted polymers coupled with solid‐phase extraction method. These results indicated that the tiliroside‐based molecularly imprinted solid‐phase extraction method was proven to be an effective technique for the separation and enrichment of tiliroside from natural medicines.     

A (−)‐norephedrine‐based molecularly imprinted polymer for the solid‐phase extraction of psychoactive phenylpropylamino alkaloids from Khat (Catha edulis Vahl. Endl.) chewing leaves

A molecularly imprinted polymer (MIP) was prepared using (?)‐norephedrine as the template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross‐linker and chloroform as the porogen. The MIP was used as a selective sorbent in the molecularly imprinted solid‐phase extraction (MIP‐SPE) of the psychoactive phenylpropylamino alkaloids, norephedrine and its analogs, cathinone and cathine, from Khat (Catha edulis Vahl. Endl.) leaf extracts prior to HPLC‐DAD analysis. The MIP was able to selectively extract the alkaloids from the aqueous extracts of Khat. Loading, washing and elution of the alkaloids bound to the MIP were evaluated under different conditions. The clean baseline of the Khat extract obtained after MIP‐SPE confirmed that a selective and efficient sample clean‐up was achieved. Good recoveries (90.0–107%) and precision (RSDs 2.3–3.2%) were obtained in the validation of the MIP‐SPE‐HPLC procedure. The content of the three alkaloids in Khat samples determined after treatment with MIP‐SPE and a commercial Isolute C₁₈ (EC) SPE cartridge were in good agreement. These findings indicate that MIP‐SPE is a reliable method that can be used for sample pre‐treatment for the determination of Khat alkaloids in plant extracts or similar matrices and could be applicable in pharmaceutical, forensic and biomedical laboratories. Copyright © 2015 John Wiley & Sons, Ltd.     

Preconcentration of Nicotinamide Using Molecularly Imprinted Microspheres for Solid-phase Extraction with Determination by High-performance Liquid Chromatography

The determination of target molecules in complicated matrices such as biological samples is largely dependent on sample pretreatment. Molecularly imprinted solid-phase extraction (SPE), using molecularly imprinted polymers as the adsorbent, has been demonstrated to be effective for the selective enrichment of target molecules in biological samples. In this study, molecularly imprinted polymeric microspheres were fabricated by two-step swelling polymerization using polystyrene particles as seeds, nicotinamide as the template, methacrylic acid as a functional monomer, and ethylene glycol dimethacrylate as a cross-linker. The molecularly imprinted polymeric microspheres were packed into empty SPE cartridges, and the spiked urine and serum samples were loaded separately. After an initial washing and elution step, the effluents were analyzed by high-performance liquid chromatography (HPLC) using 1:9 methanol/0.05% phosphoric acid. The obtained molecularly imprinted polymeric microspheres were uniform, and the spherical particles were well distributed. The established method was validated, and the results showed that the method was linear from 0.499 to 19.96?µg?mL^?1. The limits of detection and quantification for nicotinamide were 0.3 and 0.9?µg?mL^?1, respectively. The relative standard deviations were 1.55 and 2.86% in urine and serum, respectively. The spiked recoveries of nicotinamide were 86.0–98.8% and 87.0–96.8% in urine and serum, respectively. The molecularly imprinted SPE and HPLC methods in this study are useful for the pretreatment and determination of the target compounds in these matrices.     

Determination of quercetin glycosides and free quercetin in buckwheat by capillary micellar electrokinetic chromatography

A simple and reliable method for determination of quercetin glycosides and free quercetin in buckwheat flower, leaves, stems and achenes was developed. The method consists of flavonoid extraction from freeze‐dried homogenous material in 50% v/v methanol solution and in presence of an antioxidant, cleaning of extract and analyte isolation using SPE. Analytical step uses capillary micellar electrokinetic chromatography. The working ranges, LOD and LOQ, recovery, precision and measurement uncertainty were calculated. The method is suitable for samples from buckwheat. The highest content of rutin was found in flowers of both kinds of buckwheat (99 400 mg/kg in F. esculentum, 108 000 mg/kg in F. tataricum). The free quercetin occurs in flowers and achenes of F. esculentum, whereas flowers and achenes of F. tataricum contained quercitrin.     

Influence of extraction methods on stability of flavonoids

The LC-MS/MS was applied for the determination of flavonoids' stability under four types of solvent extraction methods (reflux heating, sonication, maceration and microwave) from maize samples. The 11 flavonoids belong to different groups: flavonols (kaempferol, myricetin, rhamnetin, quercetin, rutin), flavanones (naringenin, naringin, hesperedin), flavones (apigenin, luteolin), isoflavones (genistein) were studied. The effect of the degradation of flavonoids depended on extraction mode and chemical structure. The smallest decomposition was observed by heated reflux extraction procedure within 30 min in water bath and by microwave assisted extraction under 160 W during 1 min. The decomposition for flavonoids depends on number of substituents in flavonoid molecule. The most unstable compound (recovery below 50%) in tested condition was myricetin. The higher number of hydroxyl groups promote degradation of flavonoids, whereas sugar moiety and methoxyl groups protect flavonoids of degradation during microwave and ultrasonic assisted extraction.     

Simple and selective extraction of quercetin with microextraction in packed syringe method using modified glass powder by a molecularly imprinted polymer followed by spectrophotometric determination

A new sample preparation method based on microextraction in packed syringe was developed for preconcentration of quercetin prior to its spectrophotometric determination. Molecularly imprinted polymers as packing material was used for higher extraction efficiency. First, glass powder as support material because of low cost and available substrate was modified, and then molecularly imprinted polymers were synthesized by the sol–gel method using 3-aminopropyltriethoxysilane as a functional monomer and tetraethyl orthosilicate as cross-linker agent. The combination of a molecularly imprinted polymers and microextraction in packed syringe increased the selectivity and sensitivity. The surface morphology and functionality of the prepared molecularly imprinted polymers was characterized using Fourier-transform infrared spectroscopy, Field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and thermogravimetric analysis. Different influencing parameters on extraction efficiency such as effect of the number of sample sorption/desorption cycles, type and volume of desorption solvent, pH of the sample solution, and molecularly imprinted polymers amounts were optimized. Under the optimum condition, the proposed method displayed a linear range from 0.01 to 5 µg mL⁻¹ and limit of detection 3.68 ng mL⁻¹. Relative standard deviation for three replicate determination of 1 µg mL⁻¹ quercetin was 2.1 %. The proposed method was applied successfully for the selective extraction of quercetin from tea and coffee samples.     

Study on the PEG‐based microwave‐assisted extraction of flavonoid compounds from persimmon leaves

A method for PEG‐based microwave‐assisted extraction (MAE) of flavonoid compounds from persimmon leaves has been successfully developed. The extraction efficiency of total flavonoid content was evaluated by the chromatographic peak areas of quercetin and kaempferol, which are two bioactive components typically found in persimmon leaves. The best combination of extraction parameters was obtained with response surface methodology. A microwave power of 525 W, liquid to solid ratio of 17:1 mL/g, and PEG aqueous solution concentration of 60% w/w were identified as the optimum parameters. Extraction dynamics analysis indicated that the quercetin, kaempferol, and total flavonoid contents were rising with increasing extraction time up to 20–25 min, from which point onwards they all decreased. Under the optimum conditions, quercetin, kaempferol, and total flavonoid contents obtained from the sample were 1.20 ± 0.05, 0.64 ± 0.11, and 16.90 ± 0.06 mg/g, respectively. Compared with ethanol‐based MAE, and ethanol‐based and PEG‐based ultrasonic‐assisted extractions, PEG‐based MAE had higher efficiency for the extraction of flavonoid compounds from persimmon leaves. Overall, PEG‐based MAE represents an efficient choice for the extraction of bioactive substances from traditional Chinese medicines.     

Flavonol Glycosides from the Leaves of Embelia Keniensis

Five new flavonol glycosides characterized as syringetin 3‐O‐α‐rhamnoside‐7‐O‐β‐glucoside, syringetin 3‐O‐α‐rhamnoside‐7,4′‐di‐O‐β‐glucoside, quercetin‐7‐O‐β‐galactosyl (1→3)‐β‐galactoside, myricetin 3‐O‐α‐rhamnosyl (1→4)‐β‐galactoside and myricetin 3‐O‐β‐glucosyl (1→2)‐β‐glucoside‐7‐O‐β‐glucosyl‐(1→4)‐α‐rhamnoside have been isolated from a methanolic extract of Embelia keniensis leaves. Known flavonols isolated from the same extract included myricetin, quercetin, kaempferol, myricetin 3‐O‐α‐rhamnoside, myricetin 3‐O‐β‐glucoside, quercetin 3‐O‐α‐rhamnoside, quercetin 3‐O‐β‐glucoside, quercetin 3‐O‐β‐xyloside, isorhamnetin 3‐O‐α‐rhamnoside and myricetin 3‐O‐rutinoside. Their structures were established from extensive spectroscopic and chemical studies and by comparison with authentic samples.     

Hybrid molecularly imprinted polymers modified by deep eutectic solvents and ionic liquids with three templates for the rapid simultaneous purification of rutin,scoparone, and quercetin from Herba Artemisiae Scopariae

Different kinds of deep eutectic solvents based on choline chloride and ionic liquids based on 1‐methylimidazole were used to modify hybrid molecularly imprinted polymers with the monomer γ‐aminopropyltriethoxysilane‐methacrylic and three templates (rutin, scoparone, and quercetin). The materials were adopted as solid‐phase extraction packing agents, and were characterized by FTIR spectroscopy and field emission scanning electron microscopy. The hybrid molecularly imprinted polymers modified by deep eutectic solvents had high recoveries and a strong recognition of rutin, scoparone, and quercetin in Herba Artemisiae Scopariae than those modified by ionic liquids. In the procedure of solid‐phase extraction, deep eutectic solvents‐2‐hybrid molecularly imprinted polymers were obtained with the best recoveries with rutin (92.27%), scoparone (87.51%), and quercetin (80.02%), and the actual extraction yields of rutin (5.6 mg/g), scoparone (2.3 mg/g), and quercetin (3.4 mg/g). Overall, the proposed approach with the high affinity of hybrid molecularly imprinted polymers might offer a novel method for the purification of complex samples.     

Magnetic molecularly imprinted specific solid‐phase extraction for determination of dihydroquercetin from Larix griffithiana using HPLC

The naturally occurring quercetin flavonoid, dihydroquercetin, is widely distributed in plant tissues and has a variety of biological activities. Herein, a magnetic molecularly imprinted solid‐phase extraction was tailor made for selective determination of dihydroquercetin in Larix griffithiana using high‐performance liquid chromatography. Amino‐functionalized core‐shell magnetic nanoparticles were prepared and characterized using scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, and infrared spectroscopy. The polymer had an average diameter of 250 ± 2.56 nm and exhibited good stability and adsorption for template molecule, which is enriched by hydrogen bonding interaction. Multiple factors for extraction, including loading, washing, elution solvents, and extraction time, were optimized. The limit of detection was 1.23 μg/g. The precision determined at various concentration of dihydroquercetin was less than 4% and the mean recovery was between 74.64 and 101.80%. It has therefore been shown that this protocol can be used as an alternative extraction to quantify dihydroquercetin in L. griffithiana and purify quercetin flavonoid from other complex matrices.     

Preparation of five high‐purity iridoid glycosides from Gardenia jasminoides Eills by molecularly imprinted solid‐phase extraction integrated with preparative liquid chromatography

Five iridoid glycosides were prepared using molecularly imprinted solid‐phase extraction combined with preparative high‐performance liquid chromatography. Hydrophilic molecularly imprinted polymers were synthesized using α‐1‐allyl‐2‐N‐acetyl glucosamine, which introduced an abundance of hydrophilic groups into the polymers. Using molecularly imprinted solid‐phase extraction as the sample pretreatment procedure, five iridoid glycosides, gardenoside, geniposide, shanzhiside, geniposidic acid, and genipin‐1‐O‐gentiobioside, were selectively enriched from Gardenia fructus extracts. Preparative high‐performance liquid chromatography then provided iridoid glycosides with a purity >98%. The structures were elucidated by using nuclear magnetic resonance spectroscopy, optical rotation and melting point measurements, and mass spectrometry. The results demonstrate that molecularly imprinted solid‐phase extraction combined with preparative high‐performance liquid chromatography was an efficient, rapid, and economical method for the preparation of bioactive compounds from natural products.     

Selective extraction of clonazepam from human plasma and urine samples by molecularly imprinted polymeric beads

A molecularly imprinted polymer (MIP) based on free‐radical polymerization was prepared with 1‐(N,N‐biscarboxymethyl)amino‐3‐allylglycerol and N,N‐dimethylacrylamide as functional monomers, N,N‐methylene diacrylamide as the cross‐linker, copper ion‐clonazepam as the template and 2,2‐azobis(2‐methylbutyronitrile) as the initiator. The imprinted polymer was characterized by Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis, and SEM. The MIP of agglomerated microparticles with multipores was used for SPE. The imprinted polymer sorbent was selective for clonazepam. The optimum pH and sorption capacity were 5 and 0.18 mg/g at 20°C, respectively. The profile of the drug uptake by the sorbent reflects good accessibility of the active sites in the imprinted polymer sorbent. The MIP‐SPE was the most feasible technique for the extraction of clonazepam with a high recovery from human plasma and urine samples.     

Preparing molecularly imprinted membranes by phase inversion to separate kaempferol

Molecularly imprinted membranes (MIMs) were studied to separate special target molecule – kaempferol, an important active pharmaceutical ingredient. The kaempferol MIM were prepared by the liquid–solid phase inversion method. The effects of polyphenylene sulfone, LiCl, and ZnCl₂ on membrane performance were studied, a high Flux MIM was prepared, then the kaempferol molecularly imprinted polymer membrane, non‐molecularly imprinted membrane, and non‐molecularly imprinted polymer membrane were prepared to investigate adsorption capacity. From adsorption isotherm curve, the maximum equilibrium adsorption quantity was 890 µg/g, and it was MIM. The MIM and molecularly imprinted polymer membrane give high selectivity towards kaempferol; the non‐molecularly imprinted membrane and non‐molecularly imprinted polymer membrane showed low adsorption quantity and selectivity. The reuse experiment of the MIM indicated that it has good reuse property. All the results showed binding sites were important in the separation process of MIMs. Copyright © 2016 John Wiley & Sons, Ltd.     

Reversed phase-HPLC for rapid determination of polyphenols in flowers of rose species

A rapid, simple, sensitive, robust, and improved HPLC method was developed and validated for determination of 10 polyphenols, namely gallic acid, catechin, epicatechin, rutin, m-coumaric acid, quercitrin, myricetin, quercetin, apigenin, and kaempferol in fresh flowers of Rosa bourboniana and R. brunonii and in both fresh flowers and marc (left after industrial distillation of rose oil) of R. damascena. Six polyphenols, gallic acid, rutin, quercitrin, myricetin, quercetin, and kaempferol, were detected and quantified in all extracts. The chromatographic separation of 10 polyphenols was achieved in less than 16 min by RP-HPLC (Phenomenex, Luna C18 (2) column, 5 microm, 250 mm x 4.6 mm) using linear gradient elution of water and acetonitrile (0.02% trifluroacetic acid) with a flow rate of 1 mL/min at lambda 280 nm. Standard calibration curves were linear in the range of 0.39-500 microg/mL. Good results were achieved with respect to repeatability (RSD <3%) and recovery (98.6-100.8%). The method was validated for linearity, accuracy, repeatability, LOD, and LOQ.     

A comprehensive chromatographic comparison of amphetamine and methylamphetamine extracted from river water using molecular imprinted polymers and without the need for sample derivatization

This work explores the differences between two GCMS instruments for the determination of amphetamine and methylamphetamine extracted from water samples (ultra pure water and river water) without the necessity for derivatization. The instruments contained different generations of gas chromatograph and mass selective detector components and revealed significantly different results when presented with the same samples. The extraction methodology also compared two SPE systems. The extraction efficiency of commercially available molecular imprinted polymers as a sorbent in SPE was compared with commonly used hydrophilic balance sorbent. Molecular imprinted polymers provided excellent recoveries (81 ± 2% and 108 ± 3% at 30 μg L^?1, and 94 ± 2% and 94 ± 2% at 200 μg L^?1 for amphetamine and methylamphetamine, respectively). The best LOD obtained was sufficient for the determination of both drugs extracted from river water (0.029 ± 0.003 and 0.015 ± 0.004 μg L^?1 for amphetamine and methylamphetamine, respectively). These were comparable to literature values obtained through conventional extraction and analysis using LC‐MS/MS but had the advantage of being achieved using an underivatized GCMS method.     

Design of selective molecularly imprinted sorbent for the optimized solid‐phase extraction of S‐pramipexole from the model multicomponent sample of human urine

The objective of this article was to design the selective molecularly imprinted sorbent dedicated to the solid‐phase extraction of S‐pramipexole from the complex matrix such as human urine. For that purpose, S‐2,6‐diamino‐4,5,6,7‐tetrahydrobenzothiazole was used as the template acting as the structural analog of S‐pramipexole and five various monomers were employed in the presence of ethylene glycol dimethacrylate to produce molecularly imprinted polymers. The binding capabilities of resulted polymers revealed that the highest imprinting effect was noted for polymer prepared from the itaconic acid. The comprehensive analysis of morphology and the characterization of binding sites showed not only negligible differences in the extension of surfaces of imprinted and nonimprinted polymers but also higher heterogeneity of binding sites in the imprinted material. Comprehensive optimization of the molecularly imprinted solid‐phase extraction allowed to select the most appropriate solvents for loading, washing, and elution steps. Subsequent optimization of mass of sorbent and volumes of solvents allowed to achieve satisfactory total recoveries of S‐pramipexole from the model multicomponent real sample of human urine that equals to 91.8 ± 3.2% for imprinted sorbent with comparison to only 37.1 ± 1.1% for Oasis MCX.