Initiator effect on the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline

The aim of this research was to study the effect of the initiator on the resulting monomer distribution for the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐phenyl‐2‐oxazoline (PhOx). At first, kinetic studies were performed for the homopolymerizations of both monomers at 160 °C under microwave irradiation using four initiators. These initiators have the same benzyl‐initiating group but different leaving groups, Cl^?, Br^?, I^?, and OTs^?. The basicity of the leaving group affects the ratio of covalent and cationic propagating species and, thus, the polymerization rate. The observed differences in polymerization rates could be correlated to the concentration of cationic species in the polymerization mixture as determined by ¹H NMR spectroscopy. In a next‐step, polymerization kinetics were determined for the copolymerizations of EtOx and PhOx with these four initiators. The reactivity ratios for these copolymerizations were calculated from the polymerization rates obtained for the copolymerizations. This approach allows more accurate determination of the copolymerization parameters compared to conventional methods using the composition of single polymers. When benzyl chloride (BCl) was used as an initiator, no copolymers could be obtained because its reactivity is too low for the polymerization of PhOx. With decreasing basicity of the used counterions (Br^? > I^? > OTs^?), the reactivity ratios gradually changed from r_EtOx = 10.1 and r_PhOx = 0.30 to r_EtOx = 7.9 and r_PhOx = 0.18. However, the large difference in reactivity ratios will lead to the formation of quasi‐diblock copolymers in all cases. In conclusion, the used initiator does influence the monomer distribution in the copolymers, but for the investigated system the differences were so small that no difference in the resulting polymer properties is expected. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4804–4816, 2008     

Observation of a CuII2(μ‐1,2‐peroxo)/CuIII2(μ‐oxo)2 Equilibrium and its Implications for Copper–Dioxygen Reactivity

Synthesis of small‐molecule Cu₂O₂ adducts has provided insight into the related biological systems and their reactivity patterns including the interconversion of the Cu^II₂(μ‐η²:η²‐peroxo) and Cu^III₂(μ‐oxo)₂ isomers. In this study, absorption spectroscopy, kinetics, and resonance Raman data show that the oxygenated product of [(BQPA)Cu^I]⁺ initially yields an “end‐on peroxo” species, that subsequently converts to the thermodynamically more stable “bis‐μ‐oxo” isomer (K_eq=3.2 at ?90 °C). Calibration of density functional theory calculations to these experimental data suggest that the electrophilic reactivity previously ascribed to end‐on peroxo species is in fact a result of an accessible bis‐μ‐oxo isomer, an electrophilic Cu₂O₂ isomer in contrast to the nucleophilic reactivity of binuclear Cu^II end‐on peroxo species. This study is the first report of the interconversion of an end‐on peroxo to bis‐μ‐oxo species in transition metal‐dioxygen chemistry.     

Synthesis,characterization, and cross‐linking of a library of statistical copolymers based on 2‐“soy alkyl”‐2‐oxazoline and 2‐ethyl‐2‐oxazoline

The synthesis of statistical copolymers consisting of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐“soy alkyl”‐2‐oxazoline (SoyOx) via a microwave‐assisted cationic ring‐opening polymerization procedure is described. The majority of the resulting copolymers revealed polydispersity indices below 1.30. The reactivity ratios (r_EtOx 1.4 ± 0.3; r_SoyOx = 1.7 ± 0.3) revealed a clustered monomer distribution throughout the polymer chains. The thermal and surface properties of the pEtOx‐stat‐SoyOx copolymers were analyzed before and after UV‐curing demonstrating the decreased chain mobility after cross‐linking. In addition, the cross‐linked materials showed shape‐persistent swelling upon absorption of water from the air, whereby as little as 5 mol % SoyOx was found to provide efficient cross‐linking. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5371,–5379, 2007     

Reactivity of Hydroxy and Amino Derivatives of 2‐Phenyl‐1H‐imidazoline and 2‐Phenyl‐1H‐imidazole toward Isocyanates: Synthesis of Appropriate Carbamates and Ureas

Reactivity of 2‐(4‐hydroxyphenyl)‐1H‐imidazoline and 2‐(4‐hydroxyphenyl)‐1H‐imidazole toward substituted phenyl isocyanates was studied. When mentioned imidazoline was treated with 2.5 equiv of substituted phenyl isocyanate, three N,O‐dicarboxamides were prepared (substituents are H, 4‐NO₂, and 4‐CH₃). Subsequently, N,O‐diacetylated 2‐(4‐hydroxyphenyl)‐1H‐imidazoline was prepared and selective deprotection method was developed for preparation of 1‐acetyl‐2‐(4‐hydroxyphenyl)‐1H‐imidazoline using diethylamine in acetone. Six carbamates derived from this imidazoline were then prepared using 1.1 equiv of substituted phenyl isocyanates (substituents are H, 4‐CH₃, 4‐OCH₃, 4‐NO₂, 4‐CN, and 3‐CF₃). Finally, two carbamates were prepared from 2‐(4‐hydroxyphenyl)‐1H‐imidazole (substituents are 4‐NO₂ and 4‐CN). No reactivity to imidazole ring was observed in this case. Eight derivatives were subjected to antimycobacterial screening. Concurrently, reactivity of 2‐(2‐aminophenyl)‐ and 2‐(2‐hydroxyphenyl)‐1H‐imidazole toward aliphatic and aromatic isocyanates was studied. Eight ureas were prepared using equivalent mixture of 2‐(2‐aminophenyl)‐1H‐imidazole and isocyanate (Et, Pr, isoPr, terc‐Bu, Cy, Ph, 4‐CH₃C₆H₄, 4‐CNC₆H₄). Similar attempts to obtain related carbamates from 2‐(2‐hydroxyphenyl)‐1H‐imidazole lead only to three substituted phenyl carbamates (substituents are 4‐CH₃, 4‐NO₂, and 4‐CN). In both cases, no reactivity to imidazole ring was observed again.     

Hexa­aqua­magnesium(II) bis­[N‐(6‐amino‐3,4‐di­hydro‐3‐methyl‐5‐nitro­so‐4‐oxopyrimidin‐2‐yl)­glycinate] dihydrate

The analysis of the title compound, [Mg(H₂O)₆](C₇H₈N₅O₄)₂·2H₂O, continues our study of the reactivity of metal ions with N‐protected amino acids. The Mg ion lies on an inversion centre with Mg—O 2.0437 (10)‐2.0952 (10) Å. The [Mg(H₂O)₆]²⁺cations, anions and water mol­ecules are linked by an extensive hydrogen‐bond network.     

A series of substituted (2E)‐3‐(2‐fluoro‐4‐phenoxyphenyl)‐1‐phenylprop‐2‐en‐1‐ones

In the molecular structures of a series of substituted chalcones, namely (2E)‐3‐(2‐fluoro‐4‐phenoxyphenyl)‐1‐phenylprop‐2‐en‐1‐one, C₂₁H₁₅FO₂, (I), (2E)‐3‐(2‐fluoro‐4‐phenoxyphenyl)‐1‐(4‐fluorophenyl)prop‐2‐en‐1‐one, C₂₁H₁₄F₂O₂, (II), (2E)‐1‐(4‐chlorophenyl)‐3‐(2‐fluoro‐4‐phenoxyphenyl)prop‐2‐en‐1‐one, C₂₁H₁₄ClFO₂, (III), (2E)‐3‐(2‐fluoro‐4‐phenoxyphenyl)‐1‐(4‐methylphenyl)prop‐2‐en‐1‐one, C₂₂H₁₇FO₂, (IV), and (2E)‐3‐(2‐fluoro‐4‐phenoxyphenyl)‐1‐(4‐methoxyphenyl)prop‐2‐en‐1‐one, C₂₂H₁₇FO₃, (V), the configuration of the keto group with respect to the olefinic double bond is s‐cis. The molecules pack utilizing weak C—H...O and C—H...π intermolecular contacts. Identical packing motifs involving C—H...O interactions, forming both chains and dimers, along with C—H...π dimers and π–π aromatic interactions are observed in the fluoro, chloro and methyl derivatives.     

2‐Bromo‐6‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)pyridine,a new unexpected bifunctional building block for combinatorial chemistry

The first reported structure of a pyridin‐2‐ylboron derivative, viz. the title compound, C₁₁H₁₅BBrNO₂, (I), is compared with its regioisomer 2‐bromo‐5‐(4,4,5,5‐tetra­methyl‐1,3,2‐dioxa­borolan‐2‐yl)­pyridine, (II) [Sopková‐de Oliveira Santos, Lancelot, Bouillon & Rault (2003). Acta Cryst. C59, o111o113 ]. Structural differences are observed, firstly in the orientation of the dioxaborolane ring with respect to the pyridine ring and secondly in the bond angles of the BO₂ group. These differences do not explain the experimentally observed differences in chemical reactivity between (I) and (II) but do confirm the relatively lower stability of (I). However, ab initio calculations of the HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital), based on the known crystal structures of the two compounds, show different distributions, which correspond to the differences observed during chemical reactions.     

The α‐effect exhibited in gas‐phase SN2@N and SN2@C reactions

In order to explore the existence of α‐effect in gas‐phase S_N2@N reactions, and to compare its similarity and difference with its counterpart in S_N2@C reactions, we have carried out a theoretical study on the reactivity of six α‐oxy‐Nus (FO^?, ClO^?, BrO^?, HOO^?, HSO^?, H₂NO^?) in the S_N2 reactions toward NR₂Cl (R = H, Me) and RCl (R = Me, i‐Pr) using the G2(+)_M theory. An enhanced reactivity induced by the α‐atom is found in all examined systems. The magnitude of the α‐effect in the reactions of NR₂Cl (R = H, Me) is generally smaller than that in the corresponding S_N2 reaction, but their variation trend with the identity of α‐atom is very similar. The origin of the α‐effect of the S_N2@N reactions is discussed in terms of activation strain analysis and thermodynamic analysis, indicating that the α‐effect in the S_N2@N reactions largely arises from transition state stabilization, and the “hyper‐reactivity” of these α‐Nus is also accompanied by an enhanced thermodynamic stability of products from the n_(N) → σ*_(O?Y) negative hyperconjugation. Meanwhile, it is found that the reactivity of oxy‐Nus in the S_N2 reactions toward NMe₂Cl is lower than toward i‐PrCl, which is different from previous experiments, that is, the S_N2 reactions of NH₂Cl is more facile than MeCl. © 2013 Wiley Periodicals, Inc.     

Synthesis of 2′‐Deoxy‐1′‐homo‐N‐nucleosides with Anti‐Influenza Activity by Catalytic Methyltrioxorhenium (MTO)/H2O2 Oxyfunctionalization

This paper describes a new route for the synthesis of 1′‐homo‐N‐nucleoside derivatives by means of either methyltrioxorhenium (MTO) or supported MTO catalysts, with H₂O₂ as the primary oxidant. Under these selective conditions, the oxyfunctionalization of the heterocyclic ring and the N heteroatom oxidation were operative processes, regardless of the type of substrate used, that is, purine or pyrimidine derivatives. In addition, the oxidation of 1′‐homo‐N‐thionucleosides, showed the occurrence of site‐specific oxidative nucleophilic substitutions of the heterocyclic ring. The MTO/H₂O₂ system showed, in general, high reactivity under both homogeneous and heterogeneous conditions, affording the final products with high conversion values of substrates and from medium to high yields. Many of the novel 1′‐homo‐N‐nucleoside analogues were active against the influenza A virus, without any cytotoxic effects, retaining their activity in both protected and unprotected forms.     

Monitoring structural transformations in crystals. 13. On photocyclization in 2,3,4,5,6‐pentamethylbenzophenone, 1,3‐diphenylbutan‐1‐one and 2,4,6‐triisopropyl‐4′‐methoxybenzophenone

The geometrical parameters governing the potential for the photocyclization reaction occurring in crystals of 2,3,4,5,6‐pentamethylbenzophenone, C₁₈H₂₀O, (I), 1,3‐diphenylbutan‐1‐one, C₁₆H₁₆O, (II), and 2,4,6‐triisopropyl‐4′‐methoxybenzophenone, C₂₃H₃₀O₂, (IV), have been evaluated. Compound (IV) undergoes photocyclization but (I) and (II) do not, despite the fact that their geometrical parameters appear equally favourable for reaction. The structure of the partially reacted crystal of the photoactive compound, i.e. 2,4,6‐triisopropyl‐4′‐methoxybenzophenone–3,5‐diisopropyl‐7‐(4‐methoxyphenyl)‐8,8‐dimethylbicyclo[4.2.0]octa‐1,3,5‐trien‐7‐ol (9/1), 0.90C₂₃H₃₀O₂·0.10C₂₃H₃₀O₂, (III), was also determined, providing structural evidence for the reactivity of the compound. It has been found that the carbonyl group of the photoactive compound reacts with one of the two o‐isopropyl groups. The study has shown that the intramolecular geometrical parameters are not the only factors influencing the reactivity of compounds in crystals.     

Synthesis and properties of gradient copolymers based on 2‐phenyl‐2‐oxazoline and 2‐nonyl‐2‐oxazoline

In this study, the structure–property relationships for a series of statistical 2‐nonyl‐2‐oxazoline (NonOx) and 2‐phenyl‐2‐oxazoline (PhOx) copolymers were investigated for the first time. The copolymerization kinetics were studied and the reactivity ratios were calculated to be r_NonOx = 7.1 ± 1.4 and r_PhOx = 0.02 ± 0.1 revealing the formation of gradient copolymers. The synthesis of a systematical series of NonOx–PhOx copolymers is described, whereby the amount of NonOx was increased in steps of 10 mol %. The thermal and surface properties were investigated for this series of well‐defined copolymers. The thermal properties revealed a linear decrease in glass transition temperature for copolymers containing up to 39 wt % NonOx. Furthermore, the melting temperature of the copolymers containing 0 to 55 wt % PhOx linearly decreased most likely due to disturbance of the NonOx crystalline domains by incorporation of PhOx in the NonOx part of the copolymer. The surface energies of spincoated polymer films revealed a strong decrease in surface energy upon incorporation of NonOx in the copolymers due to strong phase separation between NonOx and PhOx allowing the NonOx chains to orient to the surface. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6433–6440, 2009     

Synthesis and Applications of Silyl 2‐Methylprop‐2‐ene‐1‐sulfinates in Preparative Silylation and GC‐Derivatization Reactions of Polyols and Carbohydrates

Trimethylsilyl, triethylsilyl, tert‐butyldimethylsilyl, and triisopropylsilyl 2‐methylprop‐2‐ene‐1‐sulfinates were prepared through (CuOTf)₂?C₆H₆‐catalyzed sila‐ene reactions of the corresponding methallylsilanes with SO₂ at 50 °C. Sterically hindered, epimerizable, and base‐sensitive alcohols gave the corresponding silyl ethers in high yields and purities at room temperature and under neutral conditions. As the byproducts of the silylation reaction (SO₂+isobutylene) are volatile, the workup was simplified to solvent evaporation. The developed method can be employed for the chemo‐ and regioselective semiprotection of polyols and glycosides and for the silylation of unstable aldols. The high reactivity of the developed reagents is shown by the synthesis of sterically hindered per‐O‐tert‐butyldimethylsilyl‐α‐d ‐glucopyranose, the X‐ray crystallographic analysis of which is the first for a per‐O‐silylated hexopyranose. The per‐O‐silylation of polyols, hydroxy carboxylic acids, and carbohydrates with trimethylsilyl 2‐methylprop‐2‐ene‐1‐sulfinate was coupled with the GC analysis of nonvolatile polyhydroxy compounds both qualitatively and quantitatively.     

Three isomeric forms of hydroxyphenyl‐2‐oxazoline: 2‐(2‐hydroxyphenyl)‐2‐oxazoline, 2‐(3‐hydroxyphenyl)‐2‐oxazoline and 2‐(4‐hydroxyphenyl)‐2‐oxazoline

Crystal structures are reported for three isomeric compounds, namely 2‐(2‐hydroxy­phenyl)‐2‐oxazoline, (I), 2‐(3‐hydroxy­phenyl)‐2‐oxazoline, (II), and 2‐(4‐hydroxy­phenyl)‐2‐oxazoline, (III), all C₉H₉NO₂ [systematic names: 2‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (I), 3‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (II), and 4‐(4,5‐dihydro‐1,3‐oxazol‐2‐yl)phenol, (III)]. In these compounds, the deviation from coplanarity of the oxazoline and benzene rings is dependent on the position of the hydroxy group on the benzene ring. The coplanar arrangement in (I) is stabilized by a strong intra­molecular O—H⋯N hydrogen bond. Surprisingly, the 2‐oxazoline ring in mol­ecule B of (II) adopts a ³T₄ (^C2T_C3) conformation, while the 2‐oxazoline ring in mol­ecule A, as well as that in (I) and (III), is nearly planar, as expected. Tetra­mers of mol­ecules of (II) are formed and they are bound together via weak C—H⋯N hydrogen bonds. In (III), strong inter­molecular O—H⋯N hydrogen bonds and weak intra­molecular C—H⋯O hydrogen bonds lead to the formation of an infinite chain of mol­ecules perpendicular to the b direction. This paper also reports a theoretical investigation of hydrogen bonds, based on density functional theory (DFT) employing periodic boundary conditions.     

Reactivity study on morpholine‐1‐carbothioic acid (2‐phenyl‐3H‐quinazolin‐4‐ylidene) amide

Regioselective reactions of morpholine‐1‐carbothioic acid (2‐phenyl‐3H‐quinazolin‐4‐ylidene) amide ( 1 ) with electrophiles and nucleophiles were studied. The compound ( 1 ) reacts with alkyl halides in basic medium to afford S‐substituted isothiourea derivatives, with amines to give 1,1‐disubstituted‐3‐(2‐phenyl‐3H‐quinazolin‐4‐ylidene) thioureas and l‐substituted‐3‐(2‐phenyl‐quinazolin‐4‐yl) thioureas via transami‐nation reaction. The reaction of ( 1 ) with amines in the presence of H₂O₂ provided N⁴‐disubstituted‐N'⁴‐(2‐phenylquinazolin‐4‐yl)morpholin‐4‐carboximidamide via oxidative desulfurization. Estimation of reactivity sites on ( 1 ) was supported using the ab initio (HF/6‐31G**) quantum chemistry calculations. The ir, ¹H nmr, ¹³C nmr, mass spectroscopy and x‐ray identified the isolated products.     

Bulk Free‐Radical Co‐ and Terpolymerization of n‐Butyl Acrylate/2‐Ethylhexyl Acrylate/Methyl Methacrylate

n‐Butyl acrylate (BA), 2‐ethylhexyl acrylate (EHA), and methyl methacrylate (MMA) are commonly used monomers in pressure‐sensitive adhesive formulations. The bulk free‐radical copolymerizations of BA/EHA, MMA/EHA, and BA/MMA are studied at 60 °C to demonstrate the use of copolymer reactivity ratios for the prediction of BA/MMA/EHA terpolymer composition. The reactivity ratios for BA/EHA and MMA/EHA copolymer systems are determined using low conversion experiments; BA/MMA reactivity ratios are already known from the literature. The reactivity ratio estimates for the BA/EHA system are r _BA = 0.994 and r _EHA = 1.621 and the estimates for MMA/EHA are r _MMA = 1.496 and r _EHA = 0.315. High conversion experiments are conducted to validate the reactivity ratios. The copolymer reactivity ratios are shown to predict terpolymer composition of high conversion BA/MMA/EHA experiments.     

4‐(2‐Hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine and the 2‐(2,3‐dimethoxyphenyl)‐, 2‐(3,4‐dimethoxyphenyl)‐ and 2‐(2,5‐dimethoxyphenyl)‐substituted derivatives

The 1,5‐benzodiazepine ring system exhibits a puckered boat‐like conformation for all four title compounds [4‐(2‐hydroxyphenyl)‐2‐phenyl‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₁H₁₈N₂O, (I), 2‐(2,3‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (II), 2‐(3,4‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (III), and 2‐(2,5‐dimethoxyphenyl)‐4‐(2‐hydroxyphenyl)‐2,3‐dihydro‐1H‐1,5‐benzodiazepine, C₂₃H₂₂N₂O₃, (IV)]. The stereochemical correlation of the two C₆ aromatic groups with respect to the benzodiazepine ring system is pseudo‐equatorial–equatorial for compounds (I) (the phenyl group), (II) (the 2,3‐dimethoxyphenyl group) and (III) (the 3,4‐dimethoxyphenyl group), while for (IV) (the 2,5‐dimethoxyphenyl group) the system is pseudo‐axial–equatorial. An intramolecular hydrogen bond between the hydroxyl OH group and a benzodiazepine N atom is present for all four compounds and defines a six‐membered ring, whose geometry is constant across the series. Although the molecular structures are similar, the supramolecular packing is different; compounds (I) and (IV) form chains, while (II) forms dimeric units and (III) displays a layered structure. The packing seems to depend on at least two factors: (i) the nature of the atoms defining the hydrogen bond and (ii) the number of intermolecular interactions of the types O—H...O, N—H...O, N—H...π(arene) or C—H...π(arene).     

Catalytic hydrolysis of p‐nitrophenyl picolinate by copper(II) and zinc(II) complexes of N‐(2‐deoxy‐β‐D‐glucopyranosyl‐2‐salicylaldimino)

D‐glucosamine Schiff base N‐(2‐deoxy‐β‐D‐glucopyranosyl‐2‐salicylaldimino) and its Cu(II) and Zn(II) complexes were synthesized and characterized. The hydrolysis of p‐nitrophenyl picolinate (PNPP) catalyzed by ligand and complexes was investigated kinetically by observing the rates of the release of p‐nitrophenol in the aqueous buffers at 25°C and different pHs. The scheme for reaction acting mode involving a ternary complex composed of ligand, metal ion, and substrate was established and the reaction mechanisms were discussed by metal–hydroxyl and Lewis acid mechanisms. The experimental results indicated that the complexes, especially the Cu(II) complex, efficiently catalyzed the hydrolysis of PNPP. The catalytic reactivity of the Zn(II) complex was much smaller than the Cu(II) complex. The rate constant k_N showing the catalytic reactivity of the Cu(II) complex was determined to be 0.299 s^?1 (at pH 8.02) in the buffer. The pK_a of hydroxyl group of the ternary complex was determined to be 7.86 for the Cu(II) complex. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 345–350, 2002     

Thiiranation of 2′‐adamantylidene‐9‐benzonorbornenylidene using 4,4′‐oligothiodimorpholine and brønsted acid

On leaving 4,4′‐dithiodimorpholine 6 powder undisturbed at room temperature over 10 years, it led to the formation of 4,4′‐tetrathiodimorpholine 7 . Reactions of 2′‐adamantylidene‐9‐benzonorbornenyidene 1 with 6, 7 , and 4,4′‐thiodimorpholine 8 and a Brønsted acid in CH₂Cl₂ at room temperature proceeded to afford the corresponding thiiranes, 2 and 3 . The order of reactivity of 4,4′‐oligothiodimorpholines combined with a Brønsted acid is 7 > 6 > 8 . The thiirane 3 was transformed to 1 and 2 under the reaction conditions. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:12–18, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20505     

Synthesis of a new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxycarbonyl)aminobenzenesulfonamide and its copolymerization with N‐phenyl maleimide

The new monomer N′‐(β‐methacryloyloxyethyl)‐2‐pyrimidyl‐(p‐benzyloxy‐ carbonyl)aminobenzenesulfonamide (MPBAS) (M₁) is synthesized using sulfadiazine as parent compound. It could be homopolymerized and copolymerized with N‐phenyl maleimide (NPMI) (M₂) by radical mechanism using AIBN as initiator at 60 °C in dimethylformamide. The new monomer MPBAS and polymers were identified by IR, element analysis and ¹H NMR in detail. The monomer reactivity ratios in copolymerization were determined by YBR method, and r₁ (MPBAS) = 2.39 ± 0.05, r₂ (NPMI) = 0.33 ± 0.02. In the presence of ammonium formate, benzyloxycarbonyl groups could be broken fluently from MPBAS segments of copolymer by catalytic transfer hydrogenation, and the copolymer with sulfadiazine side groups are recovered. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2548–2554, 2000     

1‐(2‐Cyclohex‐2‐enylpropionyl)‐3‐methylurea, 2‐ethyl‐5‐methylhexanamide and 2‐ethylpentanamide: three products of barbiturate decomposition

The three title compounds were obtained by reactions which mimic, with more extreme conditions, the in vivo metabolism of barbiturates. 1‐(2‐Cyclohex‐2‐enylpropionyl)‐3‐methylurea, C₁₁H₁₈N₂O₂, (I), and 2‐ethylpentanamide, C₈H₁₇NO, (III), both crystallize with two unique molecules in the asymmetric unit; in the case of (III), one unique molecule exhibits whole‐molecule disorder. 2‐Ethyl‐5‐methylhexanamide, C₉H₁₉NO, (II), crystallizes as a fully ordered molecule with Z′ = 1. In the crystal structures, three different hydrogen‐bonding motifs are observed: in (I) a combination of R₂²(4) and R₂²(8) motifs, and in (II) and (III) a combination of R₄²(8) and R₂²(8) motifs. In all three structures, one‐dimensional ribbons are formed by N—H...O hydrogen‐bonding interactions.