A facile light-emitting-diode induced fluorescence detector coupled to an integrated microfluidic device for microchip electrophoresis

In this paper, a compact and inexpensive light emitting diode induced fluorescence (LED-IF) detector with simplified optical configuration was developed and assembled in an integrated microfluidic device for microscale electrophoresis. The facile detector mainly consisted of an LED, a focusing pinhole, an emission filter and a photodiode, and was encapsulated in the upper layer of an aluminum alloy device with two layers. At the bottom layer, integrated circuit (IC) was assembled to manipulate the voltage for sample injection and separation, LED emission and signal amplifying. A high-power LED with fan-shaped heat sink was used as excitation source. The excitation light was focused by a 1.1 mm diameter pinhole fabricated in a thin piece of silver foil, and the obtained sensitivity was about 3 times as high as that using electrode plate. Other important parameters including LED driven current, fluorescence collection angle and detection distance have also been investigated. Under optimal conditions, considerable high-response of 0.09 fmol and 0.18 fmol mass detection limits at 0.37 nL injection volume for sodium fluorescein (SF) and FITC was achieved, respectively. This device has been successfully employed to separate penicillamine (PA) enantiomers. Due to such significant features as low-cost, integration, miniaturization, and ease of commercialization, the presented microfluidic device may hold great promise for clinical diagnostics and bioanalytical applications.     

Online photolytic optical gating of caged fluorophores in capillary zone electrophoresis utilizing an ultraviolet light‐emitting diode

Photolytic optical gating (POG) facilitates rapid, on‐line and highly sensitive analyses, though POG utilizes UV lasers for sample injection. We present a low‐cost, more portable alternative, employing an ultraviolet light‐emitting diode (UV‐LED) array to inject caged fluorescent dyes via photolysis. Utilizing the UV‐LED array, labeled amino acids were injected with nanomolar limits of detection (270 ± 30 nM and 250 ± 30 nM for arginine and citrulline, respectively). When normalized for the difference in light intensity, the UV‐LED array provides comparable sensitivity to POG utilizing UV lasers. Additionally, the UV‐LED array yielded sufficient beam quality and stability to facilitate coupling with a Hadamard transform, resulting in increased sensitivity. This work shows, for the first time, the use of an UV‐LED for online POG with comparable sensitivity to conventional laser sources but at a lower cost.     

In situ access to white light‐emitting fluorescent polymer nanocomposites via plasma‐ignited frontal polymerization

We describe a facile fabrication of white light‐emitting cadmium sulfide (CdS)‐poly(HEA‐co‐NVK) nanocomposites [2‐hydroxyethyl acrylate (HEA) and N‐vinylcarbazole (NVK)] via plasma‐ignited frontal polymerization (PIFP), a novel and rapid reaction mode of converting monomers into polymers in minutes. Frontal polymerization was initiated by igniting the upper side of the reactant with plasma. Once initiated, no additional energy was required for the polymerization to occur. The chemical functional groups of the as‐prepared nanocomposites were thoroughly investigated using Fourier transform infrared spectra. The dependence of the front velocity and front temperature on the initiator concentration and weight ratios of HEA/NVK was also investigated in detail. Perhaps more interestingly, the white light‐emitting materials synthesized by ingeniously incorporating the compensating colors of yellow emitting from 3‐(trimethoxysilyl)‐1‐propanethiol‐capped CdS nanocrystals and blue emitting from carbazole‐containing polymer were conveniently applied onto a commercial UV light‐emitting diode (LED) to generate white LEDs. The subtle change in the weight ratios of CdS/NVK can significantly impact the color hue. The white light becomes gradually colder with the increase of NVK, but becomes gradually warmer with the increase concentration of CdS nanocrystals. In a broad perspective, these white light‐emitting materials designed by PIFP approach will open a new pathway to develop “QD‐polymer nanocomposite down‐conversion LED” in a fast and efficient way. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Performance of a simple UV LED light source in the capillary electrophoresis of inorganic anions with indirect detection using a chromate background electrolyte

Light emitting diodes (LEDs) are known to be excellent light sources for detectors in liquid chromatography and capillary electromigration separation techniques, but to date only LEDs emitting in the visible range have been used. In this work, a UV LED was investigated as a simple alternative light source to standard mercury or deuterium lamps for use in indirect photometric detection of inorganic anions using capillary electrophoresis with a chromate background electrolyte (BGE). The UV LED used had an emission maximum at 379.5 nm, a wavelength at which chromate absorbs strongly and exhibits a 47% higher molar absorptivity than at 254 nm when using a standard mercury light source. The noise, sensitivity and linearity of the LED detector were evaluated and all exhibited superior performance to the mercury light source (up to 70% decrease in noise, up to 26.2% increase in sensitivity, and over 100% increase in linear range). Using the LED detector with a simple chromate-diethanolamine background electrolyte, limits of detection for the common inorganic anions, Cl-, NO3-, SO4(2-), F- and PO4(3-) ranged from 3 to 14 microg L(-1), using electrostatic injection at -5 kV for 5 s.     

A low-cost light-emitting diode induced fluorescence detector for capillary electrophoresis based on an orthogonal optical arrangement

In this work, a simple and low-cost miniaturized light-emitting diode induced fluorescence (LED-IF) detector based on an orthogonal optical arrangement for capillary electrophoresis (CE) was developed, using a blue concave light-emitting diode (LED) as excitation source and a photodiode as photodetector. A lens obtained from a waste DVD-ROM was used to focus the LED light beam into an ∼80 μm spot. Fluorescence was collected with an ocular obtained from a pen microscope at 45° angle, and passed through a band-pass filter to a photodiode detector. The performance of the LED-IF detector was demonstrated in CE separations using sodium fluorescein and fluorescein isothiocyanate (FITC)-labeled amino acids as model samples. The limit of detection for sodium fluorescein was 0.92 μM with a signal-to-noise ratio (S/N) of 3. The total cost of the LED-IF detector was less than $ 50.     

Development of Miniaturized Electrochemiluminescence Instrument using Multi‐pixel Photon Counter as the Optical Detector

We developed a miniaturized electrochemiluminescence (ECL) instrument coupled with a light‐emitting diode‐based bipolar electrochemical sensor (LED‐BPES). This instrument composes of a microcontroller circuit, a power supply circuit, a potentiostat, an optical detecting circuit, and a communication circuit. The multi‐pixel photon counter (MPPC), which is low‐cost, small‐size, and wide‐range in optical measurements, is chosen as the optical detector. The LED‐BPES composes of a disposable screen‐printed carbon electrode (SPCE) and a surface‐mount red LED. Depended on the closed bipolar electrode (C‐BPE) structure, the LED‐BPES not only avoids the employment of unstable and complex ECL reactions but also offers a cost‐effective alternative for the over‐priced ECL reagents by using a mini‐size commercial LED as the luminescent producer. The combination of MPPC and LED‐BPES helps to set up the simplified and downsized instrument system with low price and high efficiency. The presented instrument coupled with LED‐BPES works excellent in electroactive molecules detection and has great potential in the application of heavy metal ions detection.     

Heat‐shrink tubing as a solid‐phase microextraction coating for the enrichment and determination of phthalic acid esters

Heat‐shrink tubing, which shrinks in one plane only (its diameter) when heated, commonly used for sealing protection in electrical engineering, was found to be able to function as a solid‐phase microextraction coating. Its utility was demonstrated for the determination of phthalic acid esters in an aqueous solution combined with high‐performance liquid chromatography equipped with a UV absorbance detector. The preparation procedure was rather simple and only ～10 min was needed. The fiber cost is extremely low (～10 cent each). The parameters affecting the extraction were optimized. Heat‐shrink tubing fiber exhibited a significant enrichment effect for the three examined phthalic acid esters and up to 931‐fold enrichment factor was obtained. The limit of detection was <10 μg/L for all analytes. The operation repeatability and fiber‐to‐fiber reproducibility were 1.2–8.3 and 5.4–9.1%, respectively. It was successfully applied for the analysis of bottled drinking water with recoveries ranging from 90.1–100.5%.     

Novel fused-LEDs devices as optical sensors for colorimetric analysis

The development of a novel, low power optical sensing platform based on light emitting diodes (LEDs) is described. The sensor is constructed from a pair of LEDs fused together at an angle where one LED functions as the light source and the other LED is reverse biased to function as a light detector. Sensor function is based on the level of light received by the detector diode, which varies with the reflectance of the interface between the device and its environment, or the chemochromic membrane that covers the device. A simple microprocessor circuit is used to measure the time taken for the photon-induced current to discharge the detector LED from an initial 5 V (logic 1) to 1.7 V (logic zero). This sensing device has been successfully used for colour and colour-based pH measurements and offers extremely high sensitivity, enabling detection down to the sub micro molar level of dyes.     

Determination of phosphate using a highly sensitive paired emitter-detector diode photometric flow detector

The use of a novel inexpensive photometric device, a paired emitter-detector diode (PEDD) has been applied to the colorimetric determination of phosphate using the malachite green spectrophotometric method. The novel miniaturized flow detector applied within this manifold is a highly sensitive, low cost, miniaturized light emitting diode (LED) based detector. The optical flow cell was constructed from two LEDs, whereby one is the light source and the second is the light detector, with the LED light source forward biased and the LED detector reversed biased. The photocurrent generated by the LED light source discharges the junction capacitance of the detector diode from 5 V (logic 1) to 1.7 V (logic 0) and the time taken for this process to occur is measured using a simple timer circuit.The malachite green (MG) method employed for phosphate determination is based on the formation of a green molybdophosphoric acid complex, the intensity of which is directly related to phosphate concentration. Optimum analytical parameters such as reaction kinetics, reagent to sample concentration ratio and emitter wavelength intensity were investigated for the spectrophotometric method. Linear calibration plots that obeyed the Beer-Lambert law were obtained for phosphate in the range of 0.02-2 μM. The dynamic range, sensitivity and limits of detection are reported.     

锂离子选择性光电二极管传感装置的研究及在血清分析中的应用

将锂离子选择性中性载体和亲脂性pH指示剂结合在增塑的PVC膜中,pH缓冲液中锂离子浓度的变化将引起膜颜色的改变.将该膜涂覆在光电二极管光敏区并与发出锐线光的发光二极管组装在一起,构成了一种新型锂离子选择性传感装置.报道了这一传感装置的响应特性,探讨了临床分析应用的可能性.     

Novel integrated paired emitter-detector diode (PEDD) as a miniaturized photometric detector in HPLC

A novel low power, low cost, highly sensitive, miniaturized light emitting diode (LED) based flow detector has been used as optical detector for the detection of sample components in high performance liquid chromatography (HPLC). This colorimetric detector employs two LEDs, one operating in normal mode as a light source and the other is reverse biased to work as a light detector. Instead of measuring the photocurrent directly, a simple timer circuit is used to measure the time taken for the photocurrent generated by the emitter LED (lambda(max) 500 nm) to discharge the detector LED (lambda(max) 621 nm) from 5 V (logic 1) to 1.7 V (logic 0) to give digital output directly without using an A/D converter. Employing a post-column reagent method, a Nucleosil 100-7 column (functionalized with iminodiacetic acid (IDA) groups) was used to separate a mixture of transition metal complexes, manganese(II) and cobalt(II) in 4-(2-pyridylazo)-resorcinol (PAR). All optical measurements were taken by using both the in-built HPLC variable wavelength detector and the proposed paired-emitter-detector-diode (PEDD) optical detector configured in-line for data comparison. The concentration range investigated using the PEDD was found to give a linear response to the Mn(II) and Co(II) PAR complexes. The effects of flow rate and emitter LED light source intensity were investigated. Under optimised conditions the PEDD detector offered a linear range of 0.9-100 microM and LOD of 0.09 microM for Mn-PAR complex. A linear range of 0.2-100 microM and LOD of 0.09 microM for Co-PAR complex was achieved.     

高精度散射光度滴定法测定诺氟沙星的含量

用四苯硼钠标准溶液作滴定剂,采用高精度散射光度滴定法测定了诺氟沙星的含量,并将测定结果与非水滴定法、非水电位滴定法和高效液相色谱法的测定结果进行比较。结果表明：用本方法测定诺氟沙星的含量具有较高的准确度、精密度和良好的线性,且不受其降解产物的干扰。     

Construction of a light-emitting diode fluorescence detector for high-performance liquid chromatography and its application to fluorometric determination of L-3-hydroxybutyrate

This study employed a new light source, a light-emitting diode (LED), for fluorescence detection of high-performance liquid chromatography to measure the concentration of trace constituents in biological fluids. Using l-3-hydroxybutyrate ( l-3HB) as a tested trace compound, the function of the new system was compared with that of the current commercially available model. A detailed schematic diagram of the path of the detection rays in the LED detector is given. A voltage-stabilizer for the drive circuit was designed with an input of 10 V and an output of 8 V, and another voltage regulator was used to maintain a constant 8 V. Then the regulator was used to set the output voltage for the LED at 2.8 V by two external resistors. Replacing the xenon lamp with LED, this system provided higher photon density and a narrow spectrum at a wavelength of 491 nm. At room temperature (22.1°C), the average temperature of six places in the chamber of LED detector was 22.1°C compared with 51.1°C in the xenon detector. The spectra of the excitation light sources were measured. Compared with the xenon lamp, approximately 1.32 times higher excitation intensity was obtained by the LED source. The accuracy of detection of l-3HB in 50 μL of rat serum was 99.85-100.85%, and the intra-day and inter-day precision values were within 8.99 and 13.90%, respectively. The limit of detection of l-3HB was approximately 0.73 μM (signal-to-noise ratio 3). The sensitivity of the proposed LED detector was comparable to that of traditional fluorescence detectors using xenon arc lamps; however, the cost and operating temperature of LED lamps were far lower. This assay system could be further used to detect trace constituents in various samples.     

Feasibility of light-emitting diode uses for annular reactor inner-coated with TiO2 or nitrogen-doped TiO2 for control of dimethyl sulfide

Limited environmental pollutants have only been investigated for the feasibility of light‐emitting diodes (LED) uses in photocatalytic decomposition (PD). The present study investigated the applicability of LEDs for annular photocatalytic reactors by comparing PD efficiencies of dimethyl sulfide (DMS), which has not been investigated with any LED‐PD system, between photocatalytic systems utilizing conventional and various LED lamps with different wavelengths. A conventional 8 W UV/TiO₂ system exhibited a higher DMS PD efficiency as compared with UV‐LED/TiO₂ system. Similarly, a conventional 8 W visible‐lamp/N‐enhanced TiO₂ (NET) system exhibited a higher PD efficiency as compared with six visible‐LED/NET systems. However, the ratios of PD efficiency to the electric power consumption were rather high for the photocatalytic systems using UV‐ or visible‐LED lamps, except for two LED lamps (yellow‐ and red‐LED lamps), compared to the photocatalytic systems using conventional lamps. For the photocatalytic systems using LEDs, lower flow rates and input concentrations and shorter hydraulic diameters exhibited higher DMS PD efficiencies. An Fourier‐transformation infrared analysis suggested no significant absorption of byproducts on the catalyst surface. Consequently, it was suggested that LEDs can still be energy‐efficiently utilized as alternative light sources for the PD of DMS, under the operational conditions used in this study.     

Sensitive determination of sulfonamides in environmental water by capillary electrophoresis coupled with both silvering detection window and in‐capillary optical fiber light‐emitting diode‐induced fluorescence detector

A new detector, silvering detection window and in‐capillary optical fiber light‐emitting diode‐induced fluorescence detector (SDW‐ICOF‐LED‐IFD), is introduced for capillary electrophoresis (CE). The strategy of the work was that half surface of the detection window was coated with silver mirror, which could reflect the undetected fluorescence to the photomultiplier tube to be detected, consequently enhancing the detection sensitivity. Sulfonamides (SAs) are important antibiotics that achieved great applications in many fields. However, they pose a serious threat on the environment and human health when they enter into the environment. The SDW‐ICOF‐LED‐IFD‐CE system was used to determine fluorescein isothiocyanate (FITC)‐labeled sulfadoxine (SDM), sulfaguanidine (SGD) and sulfamonomethoxine sodium (SMM‐Na) in environmental water. The detection results obtained by the SDW‐ICOF‐LED‐IFD‐CE system were compared to those acquired by the CE with in‐capillary optical fiber light‐emitting diode‐induced fluorescence detection (ICOF‐LED‐IFD‐CE). The limits of detection (LODs) of SDW‐ICOF‐LED‐IFD‐CE and ICOF‐LED‐IFD‐CE were 1.0–2.0 nM and 2.5–7.7 nM (S/N = 3), respectively. The intraday (n = 6) and interday (n = 6) precision of migration time and corresponding peak area for both types of CE were all less than 0.86% and 3.68%, respectively. The accuracy of the proposed method was judged by employing standard addition method, and recoveries obtained were in the range of 92.5–102.9%. The results indicated that the sensitivity of the SDW‐ICOF‐LED‐IFD‐CE system was improved, and that its reproducibility and accuracy were satisfactory. It was successfully applied to analyze SAs in environmental water.     

Photostimulus‐Responsive Large‐Area Two‐Dimensional Covalent Organic Framework Films

Using an external stimulus to modulate the electronic structure of covalent organic frameworks (COFs) is very important because such a response will endow them with additional functions. A two‐dimensional (2D) COF, constructed from a photo‐responsive unit (1,2‐bis(5‐formyl‐2‐methylthien‐3‐yl)cyclopentene), can reversibly switch its electrical conductivity 200 times from low state (the open form) to high state (the closed form) upon irradiation with UV light and reversible with visible light. This reversible phenomenon can be monitored through a circuit containing a light‐emitting diode (LED). Photoinduced ring‐closing/opening reactions do not destroy the integrity of the frameworks, and both processes follow logarithmic carrier generation with time. Moreover, the correlation between COFs electronic properties and changes in photoinduced kinetics and absorption curves has been demonstrated.     

Design and evaluation of capillary coupled with optical fiber light‐emitting diode induced fluorescence detection for capillary electrophoresis

A new detector, capillary coupled with optical fiber LED‐induced fluorescence detector (CCOF‐LED‐IFD, using CCOF for short), is introduced for CE. The strategy of the present work was that the optical fiber and separation capillary were, in the parallel direction, fastened in a fixation capillary with larger inner diameter. By employing larger inner diameter, the fixation capillary allowed the large diameter of the optical fiber to be inserted into it. By transmitting an enhanced excitation light through the optical fiber, the detection sensitivity was improved. The advantages of the CCOF‐CE system were validated by the detection of riboflavin, and the results were compared to those obtained by the in‐capillary common optical fiber LED‐induced fluorescence detector (IC‐COF‐LED‐IFD, using COF for short). The LODs of CCOF‐CE and COF‐CE were 0.29 nM and 11.0 nM (S/N = 3), respectively. The intraday (n = 6) repeatability and interday (n = 6) reproducibility of migration time and corresponding peak area for both types of CE were all less than 1.10 and 3.30%, respectively. The accuracy of the proposed method was judged by employing standard addition method, and recoveries obtained were in the range of 98.0–102.4%. The results indicated that the sensitivity of the proposed system was largely improved, and that its reproducibility and accuracy were satisfactory. The proposed system was successfully applied to separate and determine riboflavin in real sample.     

A dual-wavelength light-emitting diode based detector for flow-injection analysis process analysers

In this paper, a small dual-wavelength light-emitting diode (LED) based detector for FIA process analysers is designed. The detector's optical parts include a flow cell, a dual-wavelength LED and a photodiode. Neither mirrors nor lenses are used. The optical paths for the different light beams are almost the same, distinguishing it from previously reported LED based detectors. The detector's electronic components, including a signal amplifier, an A/D and D/A converter, and an Intel 8031 single-chip microcomputer, are integrated on one small board. In order to obtain response signals of approximate intensity for the two colours, the D/A converter and a multiplexer are used to adjust the emission intensity of the two colours respectively. Under microcomputer control, light beams are rapidly electronically modulated. Therefore, dark current and intensity of the light beams are measured almost simultaneously; as a result, the effect of drift is negligible. While a solution of absorbance 0.875 was measured repeatedly, an RSD (relative standard deviation) of 0.24% could be reached. Furthermore, such a detector with a red/yellow LED has been coupled with the FIA technique for the determination of 10(-6)M levels of cobalt.     

Development of a microchip metal ion sensor using dinitro-azocalix[4]azacrown

A microchip metal ion sensor based on absorption of a novel 1,3-alternate calix[4]azacrown having a dinitro-azo-chromophoric pendent group, which was synthesized in this group, was manufactured and its performance was discussed. The microchip optical sensor was composed of light emitting diode (LED, 516.6 nm peak max.) as a light source, photodiode detector, and polydimethyl siloxane (PDMS) microchannel copied from a master of Si wafer. It turns out that dinitro-azocalix[4]azacrown (DAC) can make a complex with various metal ions, such as Na⁺, Ca²⁺, Cu²⁺, and Fe²⁺, based on the fundamental study of spectrochemical properties for optical sensing. The absorption signal was stable and dependent upon concentration of metal ions. Limit of detection for Na⁺ was obtained to be 78.4 ng/mL with relative standard deviation of 2.24%.     

Revisit to the photocrosslinking behavior of PVA‐SbQ as a water‐soluble photopolymer with anomalously low contents of quaterized stilbazol side chains

The photocrosslinking behavior of poly(vinyl alcohol) (PVA) substituted with 0.1, 0.3, 1.3, and 4.0 mol % of styrylpyridinium (SbQ) (PVA‐SbQs) side chains was reinvestigated. Even‐order derivative spectra of films of PVAs loaded with 0.1 and 0.3 mol % of SbQ revealed the presence of subpeaks owing to vibrational transitions, whereas PVA bearing 1.3 and 4.0 mol % of SbQ displayed a new blue‐shifted band (H‐band) at 328 nm due to H‐aggregation. Changes in derivative spectra disclosed the rapid disappearance of the H‐band of PVA‐SbQs under UV irradiation within exposure doses of 10 mJ cm^?2. On the other hand, the films of the PVA‐SbQs were insolubilized upon UV irradiation at exposure doses of 2 and 3 mJ cm^?2, respectively, leading to the conclusion that the high photosensitivity comes from the photodimerization of H‐aggregate as a ground‐state dimer. Fluorescence measurements implied the presence of J‐aggregate at 386 nm, but the involvement of the J‐aggregation in photocrosslinking was excluded because of its negligible fraction. A photosensitive emulsion of poly(vinyl acetate) emulsified with PVA‐SbQ exhibited similar changes in higher‐order derivative spectra in film and applied to fabricate a stencil for screen printing with aid of an LED‐emitting 375 nm light. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012