High‐performance liquid chromatography enantioseparation of polyhalogenated 4,4′‐bipyridines on polysaccharide‐based chiral stationary phases under multimodal elution

An investigation on the high‐performance liquid chromatography enantioseparation of 12 polyhalogenated 4,4′‐bipyridines on polysaccharide‐based chiral stationary phases is described. The overall study was directed toward the generation of efficient separations in order to obtain pure atropisomers that will serve as ligands for building homochiral metal organic frameworks. Four coated columns—namely, Lux Cellulose‐1, Lux Cellulose‐2, Lux Cellulose‐4, and Lux Amylose‐2—and two immobilized columns—namely, Chiralpak IC and IA—were used under normal, polar organic, and reversed‐phase elution modes. Moreover, Chiralcel OJ was considered under normal‐phase and polar organic conditions. The effect of the chiral selector and mobile phase composition on the enantioseparation, the enantiomer elution order and the beneficial effect of nonstandard solvents were studied. The effect of water in the mobile phase on the enantioselectivity and retention was investigated and retention profiles typical of hydrophilic interaction liquid chromatography were observed. Interesting phenomena of solvent‐induced enantiomer elution order reversal occurred under normal‐phase mode. All the considered 4,4′‐bipyridines were enantioseparated at the multimilligram level.     

HPLC separation of dihydropyridine derivatives enantiomers with emphasis on elution order using polysaccharide‐based chiral columns

The separation of enantiomers of five chiral dihydropyridine derivatives was studied on five different polysaccharide‐based chiral HPLC columns with various normal‐phase (NP), polar organic, and reversed‐phase eluents. Along with the successful separation of analyte enantiomers, the emphasis of this study was on enantiomer elution order (EEO) with various columns and mobile phase composition. The interesting phenomenon of reversal of EEO, recently reported in the case of amlodipine (AML) depending on the concentration of formic acid in acetonitrile, was also confirmed with NP eluents. Under RP conditions at relatively low water content, the EEO of AML could also be reverted by varying the concentration of formic acid in the mobile phase. However, at higher water content the same parameter did not affect the EEO, but only induced gradual decrease in resolution up to complete co‐elution of enantiomers. Additionally, in organic‐aqueous mobile phases retention factors decreased with increasing water content but only up to 20% (v/v), while above this concentration the expected typical RP behavior was observed. The presence of the commonly used additive diethylamine in the mobile phase seems important for observing a reversal in EEO with increasing concentration of formic acid. The reversal of the EEO was characteristic of AML only and was not observed for any of other dihydropyridines included in this study.     

High‐performance liquid chromatographic enantioseparation of amino alcohol analogues possessing 1,2,3,4‐tetrahydroisoquinoline skeleton on polysaccharide‐based chiral stationary phases

The stereoisomers of 1,2,3,4‐tetrahydroisoquinoline amino alcohol analogues and derivatives thereof were separated in normal‐phase mode on chiral stationary phases based on preprepared silica coated with cellulose tris‐(3,5‐dimethylphenyl carbamate), cellulose tris‐(3‐chloro‐4‐methylphenyl carbamate), cellulose tris‐(4‐methylbenzoate) or cellulose tris‐(4‐chloro‐3‐methylphenyl carbamate). On all the investigated chiral columns, the retention and the enantioseparation were influenced by the nature and the concentrations of the mobile phase components and additives, and also the temperature. Experiments were performed in the temperature range 10–50°C. Thermodynamic parameters were calculated from plots of lnα vs 1/T. On these polysaccharide‐based chiral columns, both enthalpy‐driven separations and entropy‐controlled enantioseparations were observed. The latter was advantageous with regard to the shorter retention and greater selectivity at high temperature. The sequence of elution of the stereoisomers was determined in all cases. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparison of HPLC enantioseparation of substituted binaphthyls on CD‐, polysaccharide‐ and synthetic polymer‐based chiral stationary phases

Retention and enantioseparation behavior of ten 2,2′‐disubstituted or 2,3,2′‐trisubstituted 1,1′‐binaphthyls and 8,3′‐disubstituted 1,2′‐binaphthyls, which are used as catalysts in asymmetric synthesis, was investigated on eight chiral stationary phases (CSPs) based on β‐CD, polysaccharides (tris(3,5‐dimethylphenylcarbamate) cellulose or amylose CSPs) and new synthetic polymers (trans‐1,2‐diamino‐cyclohexane, trans‐1,2‐diphenylethylenediamine and trans‐9,10‐dihydro‐9,10‐ethanoanthracene‐(11S,12S)‐11,12‐dicarboxylic acid CSPs). Normal‐, reversed‐phase and polar‐organic separation modes were employed. The effect of the mobile phase composition was examined. The enantiomeric separation of binaphthyl derivatives, which possess quite similar structures, was possible in different enantioselective environments. The substituents and their positions on the binaphthyl skeleton affect their properties and, as a consequence, the separation system suitable for their enantioseparation. In general, the presence of ionizable groups on the binaphthyl skeleton, substitution with non‐identical groups and a chiral axis in the 1,2′ position had the greatest impact on the enantiomeric discrimination. The 8,3′‐disubstituted 1,2′‐binaphthyl derivatives were the most easily separated compounds in several separation systems. From all the chiral stationary phases tested, cellulose‐based columns were shown to be the most convenient for enantioseparation of the studied analytes. However, the polymeric CSPs with their complementary behavior provided good enantioselective environments for some derivatives that could be hardly separated in any other chromatographic system.     

Evaluation of chlorine containing cellulose-based chiral stationary phases for the LC enantioseparation of basic pharmaceuticals using polar non-aqueous mobile phases

The discrimination ability of three cellulose-based chiral stationary phases (CSPs) was evaluated towards the enantiomers of basic drugs, using ACN as the main solvent in polar organic mobile phases. The study was focused on CSPs containing cellulose tris(3-chloro-4-methylphenylcarbamate) (3-Cl-4-MePC), cellulose tris(4-chloro-3-methylphenylcarbamate) (4-Cl-3-MePC) or cellulose tris(3,5-dichlorophenylcarbamate) (3,5-diClPC) as the chiral selector. The behaviour of these CSPs was studied systematically in order to investigate the influence of the presence and position of the chlorine substituents on the phenylcarbamate moieties on the retention and resolution of the enantiomers. The evaluation was made with three different generic mobile phases, namely ACN/0.1%DEA/0.1% TFA (DEA, diethylamine), ACN/0.1%DEA/0.2% FA and ACN/0.1%DEA/0.2%AcA, deduced from the previous study. The nature of the acidic additive and of the chiral selector was found to be particularly important for the retention and enantioresolution of these basic compounds. High-resolution values could be obtained for most studied enantiomers with these CSPs, clearly demonstrating the interest of using them in combination with polar organic mobile phases. However, significant differences in enantioresolution between the CSPs have been observed for many compounds, indicating that these phases seem to be quite complementary.     

Separation of the enantiomers of substituted dihydrofurocoumarins by HPLC using macrocyclic glycopeptide chiral stationary phases

Enantiomer separations by HPLC using the macrocyclic glycopeptides teicoplanin (Chirobiotic T), teicoplanin aglycon (Chirobiotic TAG), and ristocetin A (Chirobiotic R) chiral stationary phases (CSP) have been achieved on a unique series of potentially biologically active racemic analogues of dihydrofurocoumarin. The macrocyclic glycopeptides have proven to be very selective for this class of compound. All of the 28 chiral analogues examined afforded baseline separation on at least one of the macrocyclic glycopeptide CSP. The teicoplanin CSP showed the broadest enantioselectivity with 24 of the compounds baseline separated. The TAG and the R CSP produced 23 and 14 baseline separations respectively. All three mobile phase modes, i.e. normal phase (NP), reversed phase (RP), and new polar organic modes (PO), have been evaluated. The NP mode proved to be most effective for the separation of chiral dihydrofurocoumarins on all CSP tested. In the reversed phase (RP) mode, all three CSP separated a similar number of compounds. It was observed that the structural characteristics of the analytes and steric effects are very important factors leading to chiral recognition. Hydrogen bonding was found to play a secondary role in chiral discrimination in the normal phase and polar organic modes. Hydrophobic interactions are important for chiral separation in the reversed-phase mode. Chromatographic retention data does not provide information on the absolute configuration of these chiral dihydrofurocoumarin derivatives. However, when coupled with circular dichroism using the exciton coupling chirality method, the enantiomer elution order and the absolute configuration of some chiral dihydrofurocoumarins were successfully determined.     

Enantioseparations of polyhalogenated 4,4’-bipyridines on polysaccharide-based chiral stationary phases and molecular dynamics simulations of selector–selectand interactions

2’-(4-Pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs (TCIBP = 3,3’,5,5’-tetrachloro-2-iodo-4,4’-bipyridyl) are chiral compounds that showed interesting inhibition activity against transthyretin fibrillation in vitro. We became interested in their enantioseparation since we noticed that the M-stereoisomer is more effective than the P-enantiomer. Based thereon, we recently reported the enantioseparation of 2’-substituted TCIBP derivatives with amylose-based chiral columns. Following this study, herein we describe the comparative enantioseparation of both 2’-(4-pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs on four cellulose phenylcarbamate-based chiral columns aiming to explore the effect of the polymer backbone, as well as the nature and position of substituents on the side groups on the enantioseparability of these compounds. In the frame of this project, the impact of subtle variations of analyte and polysaccharide structures, and mobile phase (MP) polarity on retention and selectivity was evaluated. The effect of temperature on retention and selectivity was also considered, and overall thermodynamic parameters associated with the analyte adsorption onto the CSP surface were derived from van ’t Hoff plots. Interesting cases of enantiomer elution order (EEO) reversal were observed. In particular, the EEO was shown to be dependent on polysaccharide backbone, the elution sequence of the two analytes being P-M and M-P on cellulose and amylose tris(3,5-dimethylphenylcarbamate), respectively. In this regard, a theoretical investigation based on molecular dynamics (MD) simulations was performed by using amylose and cellulose tris(3,5-dimethylphenylcarbamate) nonamers as virtual models of the polysaccharide-based selectors. This exploration at the molecular level shed light on the origin of the enantiodiscrimination processes.     

Improved preparation of chiral stationary phases via immobilization of polysaccharide derivative‐based selectors using diisocyanates

The classical method for the preparation of immobilized polysaccharide‐based chiral stationary phases (CSPs) with a diisocyanate was improved. Cellulose or amylose was directly coated onto 3‐aminopropyl silica gel after it was dissolved in a mixture of N,N‐dimethylacetamide, LiCl, and pyridine, then immobilized onto silica gel with a diisocyanate, and finally allowed to react with an excess of corresponding isocyanate. Four polysaccharide derivatives, 3,5‐dimethylphenylcarbamate and 3,5‐dichlorophenylcarbamate of cellulose, and 3,5‐dimethylphenylcarbamate and 5‐chloro‐2‐methylphenylcarbamate of amylose, were immobilized onto silica gel utilizing this method. Compared with the classical diisocyanate method, the improved procedure avoided the derivatization and regeneration of 6‐hydroxyl groups of cellulose and amylose, and thus showed an advantage for simple and economical preparation. The relationships among the amount of diisocyanate used, immobilization efficiency, and enantioseparation on the cellulose‐based CSPs were investigated. Also, the solvent durability of the obtained CSPs was examined with eluents containing chloroform or THF. By utilizing these eluents, the chiral recognition abilities of the obtained CSPs for some of the tested racemates were improved.     

Enantiomers separation by capillary electrochromatography using polysaccharide‐based stationary phases

The separation of chiral compounds is an interesting and important topic of research because these compounds are involved in some biological processes, fundamentally in human health. Among the various application fields where enantiomers are remarkable, drug analysis has to be considered. Most of the drugs contain enantiomers and very often one of the two isomers could be pharmacologically more active or even dangerous. Therefore, the separation of these compounds is very important. Among the different analytical techniques usually employed, capillary electrochromatography has demonstrated great capability in enantiomers resolution. The great potential of this electromigration technique stands mainly in its high efficiency due to the use of an electrosmotic flow (flat flow profile) and on the high selectivity because of the use of a stationary phase. Chiral separation can be obtained utilizing several chiral stationary phases including a polysaccharide derivative. The aim of this review paper is to summarize the main features of capillary electrochromatography and polysaccharide derivatives of chiral stationary phase. It also report examples of practical applications utilizing this approach.     

Monolithic chiral stationary phases for liquid‐phase enantioseparation techniques

This short overview summarizes the development in the field of enantioselective monolithic chromatographic media and their application for pressure‐driven and electrokinetic separations. The major emphasis is put on the currently existing problems and the author's vision for their solution is provided. Due to the author's personal experience silica‐based monoliths are discussed in more detail although the key developments in the field of organic monolithic materials for separation of enantiomers are also discussed.     

Cellulose tris‐(3,5‐dimethylphenylcarbamate)‐based chiral stationary phase for the enantioseparation of drugs in supercritical fluid chromatography: comparison with HPLC

A cellulose tris‐(3,5‐dimethylphenylcarbamate)‐based chiral stationary phase was studied as a tool for the enantioselective separation of 21 selected analytes with different pharmaceutical and physicochemical properties. The enantioseparations were performed using supercritical fluid chromatography. The effect of the mobile phase composition was studied. Four different additives (diethylamine, triethylamine, isopropylamine, and trifluoroacetic acid) and isopropylamine combined with trifluoroacetic acid were tested and their influence on enantioseparation was compared. The influence of two different mobile phase co‐solvents (methanol and propan‐2‐ol) combined with all the additives was also evaluated. The best mobile phase compositions for the separation of the majority of enantiomers were CO₂/methanol/isopropylamine 80:20:0.1 v/v/v or CO₂/propan‐2‐ol/isopropylamine/trifluoroacetic acid 80:20:0.05:0.05 v/v/v/v. The best results were obtained from the group of basic β‐blockers. A high‐performance liquid chromatography separation system composed of the same stationary phase and mobile phase of similar properties prepared as a mixture of hexane/propan‐2‐ol/additive 80:20:0.1 v/v/v was considered for comparison. Supercritical fluid chromatography was found to yield better results, i.e. better enantioresolution for shorter analysis times than high‐performance liquid chromatography. However, examples of enantiomers better resolved under the optimized conditions in high‐performance liquid chromatography were also found.     

HPLC of fluoroquinolone antibacterials using chiral stationary phase based on enantiomeric (3,3′‐diphenyl‐1,1′‐binaphthyl)‐20‐crown‐6

A residual silanol group‐protecting chiral stationary phase (CSP) based on optically active (3,3′‐diphenyl‐1,1′‐binaphthyl)‐20‐crown‐6 was successfully applied to the resolution of fluoroquinolone compounds including gemifloxacin mesylate. The chiral recognition ability of the residual silanol group‐protecting CSP was generally greater than that of the residual silanol group‐containing CSP. From these results, it was concluded that the simple protection of the residual silanol groups of the latter CSP with lipophilic n‐octyl groups can improve its chiral recognition ability for the resolution of racemic fluoroquinolone compounds. The chromatographic resolution behaviors were investigated as a function of the content and type of organic and acidic modifiers and the ammonium acetate concentration in aqueous mobile phase and the column temperature. Especially, the addition of ammonium acetate to the mobile phase was found to be a quite effective means of reducing the enantiomer retentions without sacrificing the chiral recognition efficiency of the CSP.     

Optimization of the LC enantioseparation of chiral pharmaceuticals using cellulose tris(4‐chloro‐3‐methylphenylcarbamate) as chiral selector and polar non‐aqueous mobile phases

The resolving power of a new commercial polysaccharide‐based chiral stationary phase, Sepapak‐4, with cellulose tris(4‐chloro‐3‐methylphenylcarbamate) coated on silica microparticles as chiral selector, was evaluated toward the enantioseparation of ten basic drugs with widely different structures and hydrophobic properties, using ACN as the main component of the mobile phase. A multivariate approach (experimental design) was used to screen the factors (temperature, n‐hexane content, acidic and basic additives) likely to influence enantioresolution. Then, the optimization was performed using a face‐centered central composite design. Complete enantioseparation could be obtained for almost all tested chiral compounds, demonstrating the high chiral discrimination ability of this chiral stationary phase using polar organic mobile phases made up of ACN and containing an acidic additive (TFA or formic acid), 0.1% diethylamine and n‐hexane. These results clearly illustrate the key role of the nature of the acidic additive in the mobile phase.     

Synthesis and enantioseparation behaviors of novel immobilized 3,5‐dimethylphenylcarbamoylated polysaccharide chiral stationary phases

Two new polysaccharide‐derived chiral selectors, namely, 6‐azido‐6‐deoxy‐3,5‐dimethylphenylcarbamoylated amylose and 6‐azido‐6‐deoxy‐3,5‐dimethylphenyl carbamoylated cellulose, were synthesized under homogeneous conditions and immobilized onto aminized silica gel by the Staudinger reaction, resulting in two new immobilized polysaccharide chiral stationary phases (CSPs). Their enantioseparation performances were investigated under normal‐phase mode by HPLC. Among 17 analytes, baseline separations of 12 pairs of enantiomers are achieved on the immobilized cellulose CSP, which demonstrates that this new cellulose material exhibits almost the same enantioseparation performance as the coated cellulose CSP. In addition, the amylose‐derived CSP presents limited enantiorecognition ability but certain complementarity with the immobilized and coated cellulose‐based materials. Neither metolachlor nor paclitaxel side chain acids are separated on two cellulose‐derived CSPs, but effective separations are obtained on the immobilized amylose column.     

HPLC-MS/MS enantioseparation of triazole fungicides using polysaccharide-based stationary phases

The enantiomeric separation of 21 triazole fungicides was carried out on four polysaccharide-derived chiral stationary phases in the reversed phase separation mode using high performance liquid chromatography coupled with tandem mass spectrometry. All fungicides were detected in electrospray ionization (ESI) positive mode with selected reaction monitoring (SRM). Complete enantioseparation was achieved for 21 fungicides except for difenoconazole based on cellulose tris (3,5-dimethylphenylcarbamate) and cellulose tris (3-chloro-4-methylphenyl carbamate) columns by optimizing experimental conditions including mobile phase and column temperature. Mobile phase was 0.1% formic acid aqueous solution mixed with methanol or acetonitrile in different proportions. Among all the fungicides, 15 with two enantiomers and three with four stereoisomers (bitertanol, bromuconazole, and cyproconazole) were successfully separated at 25°C. Enantioseparation for the other three fungicides (propiconazole, triadimenol, and difenoconazole) with four stereoisomers could be achieved by changing the column temperature from 10 to 40°C. Propiconazole and triadimenol were enantioseparated on baseline at 40 and at 35°C, respectively, and difenoconazole was enantioseparated partially with the R(s) > 1.1 at 25°C. Moreover, linearities and limits of detection (LODs) of 21 fungicides except for difenoconazole were studied, showing coefficients of determination (R(2)) higher than 0.99 and LODs lower than 2.5 μg/L.     

HPLC enantioseparation of β2‐homoamino acids using crown ether‐based chiral stationary phase

RP high‐performance liquid chromatographic methods were developed for the enantioseparation of eleven unusual β²‐homoamino acids. The underivatized analytes were separated on a chiral stationary phase containing (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid as chiral selector. The effects of organic (alcoholic) and acidic modifiers, the mobile phase composition and temperature on the separation were investigated. The structures of the substituents in the α‐position of the analytes substantially influenced the retention and resolution. The elution sequence was determined in some cases: the S enantiomers eluted before the R enantiomers.     

Characterization of cyclofructan-based chiral stationary phases by linear free energy relationship

Cyclofructans (CFs), a new class of chiral selectors, have been recently introduced for application in liquid chromatography and capillary electrophoresis. So far, derivatized CFs have performed interesting separation possibilities for a variety of compounds. The current work is focused on characterization of three different CF-based chiral stationary phases (CF-based CSPs), i.e. isopropyl carbamate cyclofructan 6 (IP-CF6), R-naphthylethyl carbamate cyclofructan 6 (RN-CF6) and dimethylphenyl carbamate cyclofructan 7 (DMP-CF7). The linear free energy relationship (LFER) model was used to reveal the dominant interactions participating in the complex retention mechanism. A set of 44 different test solutes, with known solvation parameters, was used to determine the regression coefficients of the LFER equation under two mobile-phase compositions in normal separation mode. The LFER results showed that hydrogen bond acidity, hydrophobicity and dipolarity/polarizibility mostly affect the retention and separation process on the CF-based columns in the studied separation systems.     

Enantiomeric analysis of simendan on polysaccharide‐based stationary phases by polar organic solvent chromatography

Herein, the enantiomeric separation of simendan by high‐performance liquid chromatography with ultraviolet detection using polysaccharide‐based chiral stationary phases in polar organic mode is described. Three chiral columns (Chiralpak AD‐H, Chiralcel OD‐H, and Chiralpak AS) were screened using pure methanol and acetonitrile without additives under isocratic conditions. A reversed elution order was observed on the Chiralpak AD‐H column when the methanol content in the mobile phase (methanol–acetonitrile mixtures) was above 10%, whereby levosimendan eluted prior to dextrosimendan. Further, it was found that increasing temperature effectively improved the enantioresolution on the Chiralpak AD‐H column. Van't Hoff analysis was performed to evaluate the contribution of enthalpy and entropy to the chiral discrimination process. The best enantioseparation (α = 3.00, Rs = 12.85) was obtained on the Chiralpak AD‐H column with methanol as the mobile phase at 40°C. Thus, a quantitative method for the resolution of dextrosimendan was established and validated, which could be used as a reference for the determination of dextrosimendan in levosimendan products.     

Enantiomeric resolution of new aromatase inhibitors by liquid chromatography on cellulose chiral stationary phases

Analytical HPLC methods using derivatized cellulose chiral stationary phases were developed for the direct enantioseparation of substituted [1-(imidazo-1-yl)-1-phenylmethyl)]-benzothiazolinone and benzoxazolinone derivatives with one chiral center. Those analogues of fadrozole constitute new potent nonsteroidal inhibitors of aromatase (P450 arom). The separations were made using normal phase methodology with a mobile phase consisting of n-hexane-alcohol (ethanol, 1-propanol, or 2-propanol) in various proportions, and a silica-based cellulose tris-3,5-dimethylphenylcarbamate (Chiralcel OD-H), or tris-methylbenzoate (Chiralcel OJ). The effects of concentration of various aliphatic alcohols in the mobile phase were studied. A better separation was achieved on cellulose carbamate phase compared with the cellulose ester phase. The effects of structural features of the solutes along with the temperature of the column on the discrimination between the enantiomers were examined. Baseline separation (Rs > 1.5) was easily obtained in many cases.     

Chiral separation of helical chromenes with chloromethyl phenylcarbamate polysaccharide‐based stationary phases

Two chloromethyl phenylcarbamate‐based chiral stationary phases, one containing an amylose‐type chiral selector (Lux Amylose 2, from Phenomenex) and the other a cellulose‐type one (Lux Cellulose‐4, from Phenomenex), were successfully used for the chiral resolution of three helical chromenes featuring a helicene‐like structure. The compound bearing a phenyl substituent on the helicene‐like structure was enantioresolved at 25°C with Lux Cellulose‐4 and a n‐hexane/1‐propanol 99:1 v/v eluent. With a n‐hexane/2‐propanol 99.8:0.2 v/v mobile phase, the same column (operated at 35°C) provided the separation of the four isomers of the compound having a hexyl residue on the helicene‐like motif and an additional asymmetric carbon. Lux Amylose‐2 was necessary for the enantioseparation of the compound having the sole hexyl residue on the helical scaffold. For the last compound a n‐hexane/2‐propanol 99.8:0.2 v/v eluent was used, and the column temperature was fixed at 5°C. The enantiomer elution order was appraised by using electronic circular dichroism and theoretical calculations. Notably, different thermodynamics of retention and enantioseparation were observed for molecules with pronounced structural similarity, that is, the enantiomer pairs of the compound containing the additional asymmetric carbon atom. Indeed, both entropically and enthalpically controlled adsorption and separation processes were observed.