Nanomagnetic‐supported Sulfonic Acid: Simple and Rapid Method for the Synthesis of α,α′‐Bis‐(substituted‐benzylidene) Cycloalkanones

Nanomagnetic‐supported sulfonic acid is found to be a powerful and reusable heterogeneous catalyst for the rapid synthesis of α,α′‐bis‐(substituted‐benzylidene)cycloalkanones under conventional heating and solvent free conditions. High yield, simple work up and easy recovery of the catalyst are the most obvious advantages of this procedure.     

Synthesis of Some Novel Phenyl Substituted Oxothiazolidin- 1’’,3’’,4’’-thiadiazolo-[3’,4’-b]thiazoline of 3β-Substituted Cholestane

Three title compounds 4a—4c have been synthesized by the cyclodehydration of 1’-benzylidine-4’-(3β-substituted-5α-cholestane-6-yl)thiosemicarbazones 2a—2c with thioglycolic acid followed by the treatment with cold conc. H2SO4 in dioxane. The compounds 2a—2c were prepared by condensation of 3β-substituted-5α-cholestan- 6-one-thiosemicarbazones 1a—1c with benzaldehyde. These thiosemicarbazones 1a—1c were obtained by the reaction of corresponding 3β-substituted-5α-cholestan-6-ones with thiosemicarbazide in the presence of few drops of conc. HCl in methanol. The structures of the products have been established on the basis of their elemental, analytical and spectral data.     

Syntheses of 2,3‐dicyano‐5a,8a‐dihydro‐5a‐hydroxycyclopentano[1′,2′:4,5]pyrrolo[2,3‐b]pyrazines and 2,3‐dicyanocyclohexano[1′,2′:4,5]pyrrolo‐[2,3‐b]pyrazines

Previously synthesized 2‐(3′‐chloro‐5′,6′‐dicyanopyrazin‐2′‐yl)cyclopentan‐1‐one 1 , obtained from the reaction of 2,3‐dichloro‐5,6‐dicyanopyrazine with 1‐pyrrolidino‐1‐cyclopentene, was further reacted with primary alkylamines to give mixtures of diastereomer of 5‐alkyl‐2,3‐dicyano‐5a,8a‐dihy‐dro‐5a‐hydroxycyclopentano[1′,2′:4,5]pyrrolo[2,3‐b]pyrazines 3a‐h in high yield. The reaction of 2‐alkylamino‐3‐chloro‐5,6‐dicyanopyrazine with 1‐pyrrolidino‐1‐cyclohexene gave 5‐alkyl‐2,3‐dicyanocyclopentano[1′,2′:4,5]pyrrolo[2,3‐b]pyrazines 5a‐b together with 5‐alkylamino‐2,3‐dicyano‐6‐pyrrolidinopyrazines 6a‐b . The products prepared are all of interest as potential pesticides and new fluorescent chromophores.     

Synthesis of Novel Bis[(5‐cyanopyridin‐6‐yl)sulfanyl]butanes,Bis(2‐S‐alkylpyridines), and Bis(3‐aminothieno[2,3‐b]pyridines) Incorporating 2,6‐Dibromophenoxy Moiety

The synthetic precursors pyridine‐2(1H)‐thiones 2a , b and bis(pyridine‐2(1H)‐thione) derivative 4 , using aldehydes 1a , b incorporating 2,6‐dibromophenoxy moiety, were prepared and used to synthesize the novel target materials bis[(5‐cyanopyridin‐6‐yl)sulfanyl]butanes 5a , b , bis(2‐S‐alkylpyridines) 8a , b , and bis(3‐aminothieno[2,3‐b]pyridines) 13a–c through facile procedures. Characterization of the newly prepared compounds via elemental analyses and spectral data is established.     

Synthesis and Properties of N,N′‐Bis(difuroxano [3,4‐b:3′,4′‐d]phenyl)oxalic Amide

N,N′‐Bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide was synthesized via acylation, nitration, azidation, and pyrolysis‐denitrogenation from the starting materials of oxalyl chloride and 3,5‐dichloroaniline, under mild reaction conditions, with the yields of 81.0%, 82.0%, 86.0% and 81.7% respectively. The title compound and its precursors were characterized by ¹H NMR, IR, MS, and elemental analysis. The title compound has a density of 1.92 g·cm^?3 by a suspension method, a standard formation enthalpy of 979 kJ·mol^?1 calculated by Gaussian programs, a detonation velocity of 8.17 km·s^?1, and a detonation pressure of 31 GPa obtained by Kamlet Equation. The thermal decomposition reactions of the title compound at different heating rates were tested by differential scanning calorimetry (DSC). The kinetics parameters of the pyrolysis of the compound were calculated by Kissinger's method. The values of apparent activation energy (E_a) and pre‐exponential constant (A) were 226.7 kJ·mol^?1 and 10^23.17 s^?1 respectively. It was presupposed that N,N′‐bis(difuroxano[3,4‐b:3′,4′‐d]phenyl)oxalic amide would be a promising high energetic explosive with low sensitivity.     

Pyrazolo[4′,3′:5,6]pyrano[2,3‐b]quinoxalin‐4(1H)‐one: Synthesis and characterization of a novel tetracyclic ring system

Derivatives of the hitherto unknown ring system, pyrazolo[4′,3′:5,6]pyrano[2,3‐b]quinoxalin‐4(1H)‐one, are synthesized in one step from the corresponding 1‐substuituted or 1,3‐disubstituted 2‐pyrazolin‐5‐ones and 3‐chloroquinoxaline‐2‐carbonyl chloride using calcium hydroxide in boiling 1,4‐dioxane. The parent system carrying no substituent in positions 1 and 3 is obtained upon treatment of the 1‐PMB (p‐methoxybenzyl) protected congener with trifluoroacetic acid. Detailed NMR spectroscopic investigations including unambiguous chemical shift assignments of all ¹H, ¹³C, and ¹⁵N resonances of the obtained tetracycles are reported.     

Reactions of hydrazonoyl halides 43 : Synthesis of some new 2,3‐dihydro‐1,3,4‐thiadiazoles,pyrazoles, pyrazolo[3,4‐d]‐pyridazines,thieno[2,3‐b]pyridines,pyrimidino[4′,5′:4,5]thieno[2,3‐b]‐pyridines and pyrrolo[3,4‐d]pyrazoles

2,3‐Dihydro‐1,3,4‐thiadiazoles, pyrazoles, pyrazolo[3,4‐d]pyridazines, thieno[2,3‐b]pyridines, pyrim‐idino[4′,5′:4,5]thieno[2,3‐b]pyridines and pyrrolo[3,4‐d]pyrazoles were obtained in a good yields by treatment of hydrazonoyl halides with each of alkyl carbodithioates, 3‐(dimethylamino)‐1‐naphtho[1,2‐d]furan‐2‐ylprop‐2‐en‐1‐one and N‐arylmalemides.     

Three‐Step Synthesis of 3‐Aryl‐2‐sulfanylthieno[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridines from the Corresponding Aryl(halopyridinyl)methanones

A convenient three‐step procedure for the synthesis of three types of 3‐aryl‐2‐sulfanylthienopyridines 4, 8 , and 12 has been developed. The first step of the synthesis of thieno[2,3‐b]pyridine derivatives 4 is the replacement of the halo with a (sulfanylmethyl)sulfanyl group in aryl(2‐halopyridin‐3‐yl)methanones 1 by successive treatment with Na₂S?9 H₂O and chloromethyl sulfides to give aryl{2‐[(sulfanylmethyl)sulfanyl]pyridin‐3‐yl}methanones 2 . In the second step, these were treated with LDA (LiNⁱPr₂) to give 3‐aryl‐2,3‐dihydro‐2‐sulfanylthieno[2,3‐b]pyridin‐3‐ols 3 , which were dehydrated in the last step with SOCl₂ in the presence of pyridine to give the desired products. Similarly, thieno[2,3‐c]pyridine and thieno[3,2‐c]pyridine derivatives, 8 and 12 , respectively, can be prepared from aryl(3‐chloropyridin‐4‐yl)methanones 5 and aryl(4‐chloropyridin‐3‐yl)methanones 9 , respectively.     

Synthesis of α,α′‐Bis(Substituted Benzylidene)Cycloalkanones Catalyzed by Amino‐Functionalized Ionic Liquid

Condensation of aromatic aldehydes with cyclopentanone and cyclohexanone using amino‐functionalized ionic liquid, 1‐aminoethyl‐3‐methyl tetrafluoroborate as solvent and catalyst was successfully performed for preparation of α,α′‐bis(substituted benzylidene)cycloalkanones. The catalyst can be recovered and reused for at least three times without apparently lose of activity. The process is simple, environmentally benign and proceeds in excellent yields.     

Synthesis of some new bipyridines,thieno[2,3‐b]pyridines,and pyrazolo[3,4‐b]pyridines

Cyclocondensation of cyanoacetamide and cyanothioacetamide with sodium salt of 3‐hydroxy‐1‐(pyridin‐3‐yl)prop‐2‐en‐1‐one gave 6‐oxo‐[2,3′]bipyridine 5a and 6‐thioxo‐[2,3′]bipyridine 5b derivatives, respectively. Compound 5b upon treatment with different methylenes 8 gave thieno[2,3‐b]pyridines 10 . Treatment of 5b with iodomethane gave bipyridine derivative 7 , which cyclocondensed with hydrazines 11 to give pyrazolo[3,4‐b]pyridines 13 . J. Heterocyclic Chem., (2012).     

Synthesis of pyrrolo[3′,4′:2,3]azepino[4,5,6‐cd]indole‐8,10‐diones

3‐Amino‐4‐(3‐indolyl)pyrrolin‐2,5‐diones are condensed with various aldehydes and ketones to the cor responding imines. Under Pictet‐Spengler conditions, the latter do not cyclize to pyrrolo‐β‐carbolines, but readily yield pyrrolo[3′,4′:2,3]azepino[4,5,6‐cd]indole‐8,10‐diones.     

Synthesis of Pyrido[2′,3′: 3,4]pyrazolo[1,5‐a]pyrimidine,Pyrido[2′,3′:3,4]pyrazolo[5,1‐c][1,2,4]triazine,and Pyrazolyl Oxadiazolylthieno[2,3‐b]pyridine Derivatives

6‐(2‐Thienyl)‐4‐(trifluoromethyl)‐1H‐pyrazolo[3,4‐b]pyridine‐3‐amine reacted with different active methylene compounds to afford pyridopyrazolopyrimidine derivatives. On the other hand, it reacted with some halo compounds to give the imidazo[1′,2′:1,5]pyrazolo[3,4‐b]pyridine derivatives. Also, it diazotized to give the corresponding diazonium chloride that is coupled with several active methylene compounds to give the corresponding triazine derivatives. Furthermore, compound 3‐amino‐6‐(2(thienyl)‐4‐(trifluoromethyl)thieno[2,3‐b]pyridine‐2‐carbohydrazide reacted with some β‐dicarbonyl compounds and some sulfur‐containing compounds to afford the corresponding pyrazolyl oxadiazolylthieno[2,3‐b]pyridine derivatives.     

A Straightforward Approach for the Synthesis of Novel Derivatives of Benzo[b]pyrazolo[5′,1′:2,3]pyrimido[4,5‐e][1,4]thiazine

Several derivatives of the novel benzo[b]pyrazolo[5′,1′:2,3]pyrimido[4,5‐e][1,4]thiazine ring system have been synthesized through the one‐pot cyclocondensation of 6‐bromo‐7‐chloro‐2‐(ethylthio)‐5‐methylpyrazolo[1,5‐a]pyrimidine‐3‐carbonitrile ( 4 ) with o‐aminothiophenol in the presence of Et₃N in CH₃CN. The true regio isomer ( 5 ) was also determined by X‐ray crystallographic analysis. The N‐alkylation of the synthesized compound ( 5 ) was also accomplished.     

Synthesis of thieno[2′,3′(3′,4′ or 3′,2′):5,6]azepino[2,1-a]isoindolediones from N-Thienyl-2(3)-ylmethylphthalimides

Reduction of N-thienybnethylphthalimides 5a-e followed by the Wittig reaction gave the substituted acetic acids 8a-e . Their corresponding acyl chlorides where cyclized in the presence of aluminium trichloride to furnish the cyclic ketones 9a-e . Treatment of these ketones with bromine followed by triethylamine, or with selenium dioxide led to the thienoazepinoisoindolediones 1a-e .     

Synthesis of spiro‐pyrazole‐3,3′‐thiopyrano[2,3‐b]pyridines and azolo[a]pyrido[2′,3′:5,6]thiopyrano[3,4‐d]pyrimidines as new ring systems with antifungal and antibacterial activities

Reactions of 2,3‐dihydro‐4‐oxo‐thiopyrano[2,3‐b]pyridine with aldehydes and with DMF‐DMA furnished the 3‐benzylidene and 3‐(N,N‐dimethylamino)‐methylene derivatives. The latter products afforded spiro‐pyrazolo‐3,3′‐thiopyrano[2,3‐b]pyridines and new tetra‐ and penta‐heterocyclic ring systems when treated with nitrilimines and aminoazoles, respectively. A number of the products showed high antifungal and antibacterial activities.     

Convenient Approaches towards the Synthesis of Novel Pyrano[2,3‐a]carbazoles

Previously not easily accessible pyrano[2,3‐a]carbazoles were synthesized in highly convergent syntheses avoiding multistep procedures from readily available 1‐hydroxycarbazoles. Substituted pyrano[2,3‐a]carbazoles were produced by three different methods by treatment of the 1‐hydroxycarbazoles with dimethyl acetylene dicarboxylate (DMAD) and triphenylphoshine, by reaction with ethyl 2‐methylacetoacetate in the presence of ZnCl₂/POCl₃, and by reaction with trifluoroacetic acid followed by Wittig reaction with (carbethoxymethylene) triphenylphosphorane. The article also highlights the optimization of reaction conditions and strategies to avoid formation of byproducts for all three types of reactions.