Electrochemical synthesis and lithium storage properties of three-dimensional porous Sn–Co alloy/CNT composite

Three-dimensional (3-D) porous copper with stable pore structure is prepared by electroless plating. 3-D porous Sn–Co alloy/carbon nanotube (CNT) composite is synthesized by electrodeposition using 3-D porous copper as the substrate. The scanning electron microscope results indicate that 3-D porous Sn–Co alloy/CNT composite contains a large amount of interconnected pores with the diameter size of ~3 μm. Upon cycling, the pore structure gradually disappears, but no serious exfoliation appears due to porous structure and reinforcement by CNT. The charge/discharge results demonstrate that the 3-D porous Sn–Co alloy/CNT composite electrode delivers high first reversible specific capacity of 490 mAh g^?1, and remains 441 mAh g^?1 after 60 cycles tested at different current densities. Even at the current density of 3,200 mA g^?1, the reversible specific capacity remains 319 mAh g^?1, which is 65 % of the first specific capacity cycled at the current density of 100 mA g^?1.     

Distinctive slit-shaped porous carbon encapsulating phosphorus as a promising anode material for lithium batteries

A distinctive structure of carbon materials for Li-ion batteries is proposed for the preparation of red phosphorus-carbon composites. The slit-shaped porous carbon is observed with aggregation of plate-like particles, whose isotherm belongs to the H3 of type IV. The density functional theory (DFT) method reveals the presence of micro-mesopores in the 0.5–5 nm size range. The unique size distribution plays an important role in adsorbing phosphorus and electrochemical performance. The phosphorus-slit-shaped porous carbon composite shows initial capacity of 2588 mAh g^?1, reversible capacity of 1359 mAh g^?1 at a current density of 100 mA g^?1. It shows an excellent coulombic efficiency of ～99 % after 50 cycles.     

Nanoporous carbon microspheres as anode material for enhanced capacity of lithium ion batteries

Nanoporous carbon microspheres (NCMs) are prepared by a one-step carbonizing and activating resorcinol?formaldehyde polymer spheres (RFs) in inert and CO₂ atmosphere for anode materials of lithium-ion batteries (LIBs). Compared with RFs carbon microspheres (RF-C), after activating with hot CO₂, the NCMs with porous structure and high BET surface area of 2798.8 m² g^?1, which provides abundant lithium-ion storage site as well as stable lithium-ion transport channel. When RF-C and NCM are used to anode material for LIBs, at the same current density of 210 mA g^?1, the initial specific discharge capacity are 482.4 and 2575.992 mA h g^?1, respectively; after 50 cycles, the maintain capacity are 429.379 and 926.654 mA h g^?1, respectively. The porous spherical structure of NCM possesses noticeably lithium-ion storage capability, which exhibits high discharge capacity and excellent cycling stability at different current density. The CO₂ activating carbonaceous materials used in anode materials can tremendously enhance the capacity storage, which provides a promising modification strategy to improve the storage capacity and cyclic stability of carbonaceous anode materials for LIBs.     

Shape-controlled porous carbon from calcium citrate precursor and their intriguing application in lithium-ion batteries

Porous carbon nanosheets (PCNSs), porous carbon nanofibers (PCNFs), and flowerlike porous carbon microspheres (FPCMs) were successfully synthesized through a carbonization method combined with a simple acid pickling treatment using calcium citrate as the precursor. The as-prepared products show uniform morphologies, in which the FPCMs are self-assembled from PCNSs. As anodes of lithium-ion (Li-ion) batteries, these carbon materials deliver a stable reversible capacity above 515 mAh g^?1 after 50 cycles at 100 mA g^?1. Compared with PCNSs and PCNFs, FPCMs demonstrate preferable rate capability (378 mAh g^?1 at 1 A g^?1) and cyclability (643 mAh g^?1 at 100 mA g^?1). These results suggest that an appropriate select of morphology and structure will significantly improve the lithium storage capacity. The study also indicates that the novel shape-controlled porous carbon materials have potential applications as electrode materials in electronic devices.     

Cu-supported carbon networks containing SnO<Subscript>2</Subscript> as three-dimensional anodes for lithium-ion batteries

Cu-supported SnO₂@C composite coatings constructed by interconnected carbon-based porous branches were fabricated by annealing Cu foils with films formed by knife coating DMF solution containing SnCl₂, polyacrylonitrile (PAN), and poly(methyl methacrylate) (PMMA) on their surface in vacuum. The carbon-based porous branches consist of amorphous carbon matrices, SnO₂ nanoparticles with a size of 30–100 nm mainly encapsulated inside, and many micropores with a size of 1–5 nm. The three-dimensional (3D) porous network structures of the SnO₂@C composite were achieved by volatilization of PMMA and pyrolysis of SnCl₂. The SnO₂@C composite coatings demonstrate good cyclic performance with a high reversible capacity of 642 mA h g^?1 after 100 cycles at a current density of 50 mA g^?1 without apparent capacity fading during cycling and excellent rate performance with a capacity of 276 mA h g^?1 at a high current density up to 10 A g^?1.     

A facile synthesis of heteroatom-doped carbon framework anchored with TiO<Subscript>2</Subscript> nanoparticles for high performance lithium ion battery anodes

Titanium dioxide (TiO₂)-based materials have been well studied because of the high safety and excellent cycling performance when employed as anode materials for lithium ion batteries (LIBs), whereas, the relatively low theoretical capacity (only 335 mAh g^?1) and serious kinetic problems such as poor electrical conductivity (~?10^?13S cm^?1) and low lithium diffusion coefficient (~?10^?9 to 10^?13 cm² s^?1) hinder the development of the TiO₂-based anode materials. To overcome these drawbacks, we present a facile strategy to synthesize N/S dual-doping carbon framework anchored with TiO₂ nanoparticles (NSC@TiO₂) as LIBs anode. Typically, TiO₂ nanoparticles are anchored into the porous graphene-based sheets with N, S dual doping feature, which is produced by carbonization and KOH activation process. The as-obtained NSC@TiO₂ electrode exhibits a high specific capacity of 250 mAh g^?1 with a coulombic efficiency of 99% after 500 cycles at 200 mA g^?1 and excellent rate performance, indicating its promising as anode material for LIBs.     

Red phosphorus encapsulated in porous carbon derived from cigarette filter solid waste as a promising anode material for lithium-ion batteries

Red phosphorus (RP) is considered to be one of the promising anode materials for lithium-ion batteries (LIBs) on account of its high theoretical capacity (2596 mAh g^?1), abundant resources, and environmental friendliness. However, the intrinsic insulating nature and large volume change during lithium insertion/extraction process lead to drastic capacity loss upon cycling. Recently, great attention has been devoted to constructing P-based composites via mixing with carbon materials. Here, a novel P/C composite, in which red P nanoparticles were homogeneously distributed in cigarette filter-derived porous carbon (CPC), was fabricated by vaporization-condensation method. Due to the unique characteristics of porous carbon, including high specific area, good conductivity, and rich internal porous structure, CPC obtained by means of heat treatment that serves as conductive matrix to load red P could be of great benefits, which can not only improve the overall electrical conductivity but also mitigate the volume expansion issues. As a result, the RP/CPC composite as an anode material for LIBs delivers a good cycling stability (500 mAh g^?1 at 100 mA g^?1 with a high Coulombic efficiency above 99% after 50 cycles) and rate capability (355 mAh g^?1 even at 1000 mA g^?1).     

Tin oxide nano-flower-anchored graphene composites as high-performance anode materials for lithium-ion batteries

The SnO₂ nano-flower/graphene (SnO₂-NF/GN) composites were synthesized by using graphene (GN) and SnO₂ nano-flower (SnO₂-NF). Among them, the SnO₂-NFs were prefabricated by using sodium hydroxide and stannic chloride pentahydrate (SnCl₄·5H₂O) as raw materials. The results of SEM show that the SnO₂-NFs are uniformly dispersed on the surface of GN. Furthermore, compared with the pure SnO₂, the as-prepared SnO₂-NF/GN composites displayed superior cycle performace and high rate capability. The SnO₂-NF/GN composite delivers a specific capacity of 650 mAh g^?1 after 60 cycles and an excellent rate capability of 480 mAh g^?1 at 2000 mA g^?1.     

The intercalation/deintercalation kinetic studies on the structure-integrated cathode material 0.5Li2MnO3 0.5LiNi0.5Mn0.5O2

A cathode material, 0.5Li₂MnO₃ 0.5LiNi_0.5Mn_0.5O₂, was prepared by citric acid-assisted sol–gel method and its electrochemical performance was investigated. It delivered a charge capacity of 270 mAh g^?1 and a discharge capacity of 189 mAh g^?1 in the first cycle. With the increase of current density from 14 to 28 mA g^?1, the discharge capacity dropped severely to 130 mA g^?1. Obviously, the rate capability of the material was inferior to most of the oxide cathode materials. The diffusion coefficient of this material was calculated to be 6.04?×?10^?12 cm² s^?1 from the results of cyclic voltammetry measurements. Moreover, diffusion coefficients between 3.13?×?10^?12 and 1.22?×?10^?10 cm² s^?1 in the voltage range of 3.8–4.7 V were obtained by capacity intermittent titration technique. This, together with the localized Li₂MnO₃ domains in the crystal structure, may validate the poor rate capability.     

Advanced LiTi<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C anode by incorporation of carbon nanotubes for aqueous lithium-ion batteries

Inferior rate capability is a big challenge for LiTi₂(PO₄)₃ anode for aqueous lithium-ion batteries. Herein, to address such issue, we synthesized a high-performance LiTi₂(PO₄)₃/carbon/carbon nanotube (LTP/C/CNT) composite by virtue of high-quality carbon coating and incorporation of good conductive network. The as-prepared LTP/C/CNT composite exhibits excellent rate performance with discharge capacity of 80.1 and 59.1 mAh g^?1 at 10 C and 20 C (based on the mass of anode, 1 C = 150 mA g^?1), much larger than that of the LTP/C composite (53.4 mAh g^?1 at 10 C, and 31.7 mAh g^?1 at 20 C). LTP/C/CNT also demonstrates outstanding cycling stability with capacity retention of 83.3 % after 1000 cycles at 5 C, superior to LTP/C without incorporation of CNTs (60.1 %). As verified, the excellent electrochemical performance of the LTP/C/CNT composite is attributed to the enhanced electrical conductivity, rapid charge transfer, and Li-ion diffusion because of the incorporation of CNTs.     

The preparation and electrochemical properties of the Li-excess cathode material Li1 + x (Mn0.7Fe0.3)1 − x O2 by coprecipitation method

The Fe-substituted Li₂MnO₃ cathode materials were synthesized by the coprecipitation method. The effects of the different precipitants of Na₂CO₃ and NaOH on the structure, morphology, and electrochemical performance were investigated by X-ray diffractometry, scanning electron microscopy, dQ/dV plots, and charge–discharge tests. The results indicate that the materials prepared using both precipitants possess layered α-NaFeO₂ structure with R-3m space group. However, the material prepared using Na₂CO₃ shows smaller primary particle size as well as higher discharge capacity. The cycling test shows that the initial discharge capacity is 206 mAh g^?1 in the voltage range of 2.5–4.8 V under current density of 30 mA g^?1 at 30 °C and 231 mAh g^?1 in the voltage range of 2.0–4.8 V. Meanwhile, the discharge capacity fades to 191 mAh g^?1 after 20 cycles. The activated Mn⁴⁺ was confirmed to contribute to the high reversible capacities.     

ZnO nanoparticles anchored on nitrogen and sulfur co-doped graphene sheets for lithium-ion batteries applications

Herein, we demonstrate a facile one-step hydrothermal synthesis route to anchor ZnO nanoparticles on nitrogen and sulfur co-doped graphene sheets. The detailed material and electrochemical characterization have been carried out to demonstrate the potential of novel ZnO/NSG nanocomposite in Li-ion battery (LIBs) applications. The structure and morphology of nanocomposite were assessed by X-ray diffraction (XRD), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The as-synthesized ZnO/NSG nanocomposite has been studied as anode material in LIBs and delivered a high initial discharge capacity of 1723 mAh g^?1, at the current density of 200 mA g^?1. After 100 cycles, the ZnO/NSG nanocomposites demonstrated a high reversible capacity of 720 mAh g^?1 and coulombic efficiency of 99.8%, which can be attributed to the porous three-dimensional network, constructed by ZnO nanoparticles and nitrogen and sulfur co-doped graphene. Moreover, the designed nanocomposite has shown excellent rate capability and lower charge transfer resistance. These results are promising and encourage further research in the area of ZnO-based anodes for next-generation LIBs.     

Sulfur/microporous carbon composites for Li-S battery

A commercial carbon black with microporous framework is used as carbon matrix to prepare sulfur/microporous carbon (S/MC) composites for the cathode of lithium sulfur (Li-S) battery. The S/MC composites with 50, 60, and 72 wt.% sulfur loading are prepared by a facile heat treatment method. Electrochemical performance of the as-prepared S/MC composites are measured by galvanostatic charge/discharge tests, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), with carbonate-based electrolyte of 1.0 M LiPF₆/(PC-EC-DEC). The composite with 50 wt.% sulfur presents the optimized electrochemical performance, including the utilization of active sulfur, discharge capacity, and cycling stability. At the current density of 50 mA g^?1, it can demonstrate a high initial discharge capacity of 1624.5 mAh g^?1. Even at the current density of 800 mA g^?1, the initial capacity of 1288.6 mAh g^?1 can be obtained, and the capacity can still maintain at 522.8 mAh g^?1 after 180 cycles. The remarkably improved electrochemical performance of the S/MC composite with 50 wt.% sulfur are attributed to the carbon matrix with microporous structure, which can effectively enhance the electrical conductivity of the sulfur cathode, suppress the loss of active material during charge/discharge processes, and restrain the migration of polysulfide ions to the lithium anode.     

Three-dimensional nitrogen-doped graphene/sulfur composite for lithium-sulfur battery

A three-dimensional nitrogen-doped graphene/sulfur composite (NGS3) was synthesized by a simple hydrothermal method using urea as the nitrogen source and subsequent thermal treatment. The structure and electrochemical performance of the prepared nitrogen-doped graphene/sulfur composite (NGS3) were confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), Energy dispersive spectroscopy mapping (EDS), and galvanostatic charge/discharge measurements. SEM and EDS mapping show that NGS3 exhibits a porous structure with uniform distribution of sulfur. Compared with the graphene/sulfur composite (NGS1), NGS3 delivers an outstanding rate capability with 1501, 1278, 1136, and 1024 mAh g^?1 at 200, 400, 800, and 1000 mA g^?1, respectively, and the cycle stability of NGS3 is also wonderful, a reversible discharge capacity of 1330 mAh g^?1 is obtained after 80 cycles under the current rate of 200 mA g^?1. The wonderful electrochemical performance could be attributed to the special three-dimensional conductive structure with the help of nitrogen atom.     

A microporous carbon derived from phenol–melamine–formaldehyde resin by K2CO3 activation for lithium ion batteries

A microporous carbon material with large surface area was prepared by carbonizing and activating of phenol–melamine–formaldehyde resin, using K₂CO₃ as activation reagent. The textural characteristics of the carbon materials were characterized by scanning electron microscope, X-ray diffraction, Raman spectra, Brunauer–Emmett–Teller, elemental analyses, respectively. Results showed that the surface area and pore diameter of the activated carbon were 1,610 m² g^?1 and less than 2 nm. Electrochemical lithium insertion properties were also investigated. At a current density of 100 mA g^?1, the activated carbon showed an enormous first-discharge capacity of 2,610 mAh g^?1 and the first charge capacity of 992 mAh g^?1. From the second cycle, the coulombic efficiency went up rapidly to above 95 %. The results indicated it may be a promising candidate as an anode material for lithium secondary batteries.     

Li+ transportation kinetics of FeF3 · 0.33H2O/C nanocomposite synthesized by one-step solid state method

A new cathode material for lithium ion battery FeF₃?·?0.33H₂O/C was synthesized successfully by a simple one-step chemico-mechanical method. It showed a noticeable initial discharge capacity of 233.9 mAh g^?1 and corresponding charge capacity of 186.4 mAh g^?1. A reversible capacity of ca.157.4 mAh g^?1 at 20 mA g^?1 can be obtained after 50 charge/discharge cycles. To elucidate the lithium ion transportation in the cathode material, the methods of electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) were applied to obtain the lithium diffusion coefficients of the material. Within the voltage level of 2.05–3.18 V, the method of EIS showed that \( {D}_{{\mathrm{Li}}^{+}} \) varied in the range of 1.2?×?10^?13?~?3.6?×?10^?14 cm² s^?1 with a maximum of 1.2?×?10^?13 cm² s^?1 at 2.5 V. The method of GITT gave a result of 8.1?×?10^?14?~?1.2?×?10^?15 cm² s^?1. The way and the range of the variation for lithium ion diffusion coefficients measured by the GITT method show close similarity with those obtained by the EIS method. Besides, they both reached their maximum at a voltage level of 2.5 V.     

Preparation of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> hollow microsphere/graphene/carbon nanotube flexible film as a binder-free anode material for lithium-ion batteries

A flexible Co₃O₄ hollow microsphere/graphene/carbon nanotube hybrid film is successfully prepared through a facile filtration strategy and a subsequent thermally treated process. The composition, morphology, and structure of the as-prepared film are characterized by X-ray diffraction, X-ray photoelectron spectrometer, scanning electron microscopy, and transmission electron microscopy. Based on the morphology characterizations on the hybrid film, the Co₃O₄ hollow microspheres are uniformly and closely attached on three-dimensional (3D) graphene/carbon nanotubes (GR/CNTs) network, which decreases the agglomeration of Co₃O₄ microspheres effectively. In this hybrid film, the 3D GR/CNT network which enhances conductance as well as prevents aggregation is a benefit to help Co₃O₄ to exert its lithium storage capabilities sufficiently. When used as a binder-free anode material for lithium-ion batteries, the hybrid film delivers excellent electrochemical properties involving reversible capacity (863 mAh g^?1 at a current density of 100 mA g^?1) and rate performance (185 mAh g^?1 at a current density of 1600 mA g^?1).     

The centrifugally constructed and thermally activated three-dimensional graphene toward a binder-free highly performed anode of the lithium-ion battery

A binder-free three-dimensional porous interconnected graphene (a-3DrGO@NF) was centrifugally constructed and KOH-activated at 800 °C, leading a mechanically strong and pore-developed anode candidate for lithium ion batteries (LIBs). The unique approach of the integration of the mechanical construction and thermal activation demonstrated favorable frameworks to facilitate the stable and fast migrations of both ion and electron during the galvanostatic charge/discharge process, thus significantly improving its durability and electrochemical performance compared to those without the activated and thermal treatment. The a-3DrGO@NF LIBs showed a highly reversible capacity of 1250 mAh g^?1 at a current density of 0.1 A g^?1 after 50 cycles without degradation relative to the first cycle. More importantly, the a-3DrGO@NF LIBs exhibited excellent large current discharge property and cyclic stability of 965 mAh g^?1 in its first cycle and 545 mAh g^?1 after 150 cycles at a current density of 4 A g^?1. Furthermore, it can be quickly charged and discharged in a very short time of 92 s together with high-rate capability of 256 mAh g^?1 after 200 cycles at 10 A g^?1. At both lower and higher its current density as to 10 A g^?1, the coulombic efficiency was close to 100% and showed the reliability of a-3DrGO@NF LIBs.     

Acetonitrile mediated facile synthesis and self-assembly of silver vanadate nanowires into 3D spongy-like structure as a cathode material for lithium ion battery

We report the facile, one-step acetonitrile-mediated synthesis and self-assembly of β-AgVO₃ nanowires into three-dimensional (3D) porous spongy-like hydrogel (~ 4 cm diameter) as cathode material for lithium ion battery of high performance and long-term stability. 3D structures made with superlong, very thin, and monoclinic β-AgVO₃ nanowires exhibit high specific discharge capacities of 165 mAh g^?1 in the first cycle and 100 mAh g^?1 at the 50th cycle, with a cyclic capacity retention of 53% at a current density of 50 mA g^?1. 3D structures are synthesized by reaction between ammonium vanadate and silver nitrate solution containing 5 mL of acetonitrile followed by a hydrothermal treatment at 200 °C for 12 h. Acetonitrile (used here for the first time in the silver vanadate synthesis) plays an important role in the self-assembly of the silver vanadate nanowires. A tentative growth mechanism for the 3D structure and lithium ions intercalation into β-AgVO₃ nanowires has been discussed and described.     

Fabrication and electrochemical investigation of MWO<Subscript>4</Subscript> (M = Co,Ni) nanoparticles as high-performance anode materials for lithium-ion batteries

In this work, the MWO₄ (M = Co, Ni) nanoparticles were successfully synthesized by a facile one-step hydrothermal method and used as novel anode materials for LIBs. The micromorphology of obtained CoWO₄ and NiWO₄ was uniform nanoparticles with the size of ~60 and ~40 nm, respectively, by structural characterization including X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). When tested as lithium-ion battery anode, CoWO₄ nanoparticles exhibited a stabilized reversible capacity of 980 mA h g^?1 at 200 mA g^?1 after 120 cycles and 632 mA h g^?1 at 1000 mA g^?1 even after 400 cycles. And, the discharge capacity was as high as 550 mA h g^?1 at the 400th cycle for NiWO₄ nanoparticles. The excellent electrochemical performance could be attributed to the unique nanoparticles structure of the materials, which can not only shorten the diffusion length for electrons and lithium ions but also provide a large specific surface area for lithium storage.