Determination of inorganic anions by ion chromatography using a graphitized carbon column dynamically coated with cetyltrimethylammonium ions.

The simultaneous determination of inorganic anions by ion chromatography using a dynamically coated graphitized carbon column with cetyltrimethylammonium (CTA) ions was investigated with suppressed conductivity detection. Column preparations with CTA and sodium carbonate-sodium hydrogencarbonate concentration in the eluent were examined to optimize the separation of seven common anions (F-, Cl-, NO2-, Br-, NO3-, HPO(4)2- and SO(4)2-). Calibration curves were linear from 0.5 to 5 micrograms/ml for F-, from 1.0 to 10 micrograms/ml for Cl-, from 1.5 to 15 micrograms/ml for NO2-, from 2.0 to 20 micrograms/ml for Br- and NO3-, from 5.0 to 50 micrograms/ml for HPO(4)2- and from 3.0 to 30 micrograms/ml for SO(4)2- with correlation coefficients (r) of 0.999 or better. The relative standard deviations of peak areas were between 0.3 and 0.9% for 10 repeated measurements. The application of this newly developed method was demonstrated by the determination of inorganic anions in the water for pharmaceutical purposes. Using CTA-Br as the coating agent, a permanently coated ion-exchange column was obtained, which allowed efficient separations of seven anions without adding any coating agent to the eluent.     

Development of a polypyrrole-based amperometric detector for the determination of certain anions in water samples

The development of a polypyrrole-based modified electrode for use in the detection of anions in flow-injection analysis and ion chromatography is described. Chloride, nitrate, nitrite, perchlorate, bromide, carbonate, sulphate and phosphate were detected by using flow-injection analysis combined with the polypyrrole-based CME electrochemical detector. All of the anions were detected conveniently and reproducibly over a linear concentration range 1-100 mug/ml. A detection limit of 0.1 mug/ml was obtained for chloride and a limit of 1.0 mug/ml for all of the other anions. Chloride, nitrate, sulphate and phosphate, following separation using ion chromatography, were detected simultaneously by using a conductivity detector and the polypyrrole-based CME electrochemical detector in series. Both methods of detection yielded similar results with comparable sensitivity, linearity and limits of detection. This method was then applied to the analysis of fresh water samples. The electrode was stable over a 2-week period of operation with no evidence of chemical or mechanical deterioration.     

Simultaneous spectrophotometric determination of nitrite and nitrate by flow injection analysis.

A new catalytic spectrophotometric method is reported for the simultaneous determination of nitrite and nitrate by flow injection analysis, based on the catalytic effect of nitrite on the redox reaction between pyrogallolsulfonephthalein and potassium bromate in acidic media. Nitrate can also be on-line reduced to nitrite with a modified copper-coated cadmium reduction column. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of pyrogallolsulfonephthalein at 465 nm. Various analytical parameters such as effects of acidity, reagent concentrations, flow rates, sample sizes, lengths of the reaction coil and temperatures were studied and were optimized. Under the optimized conditions, the calibration graph was linear for 2.4 to 160 ng ml(-1) of nitrite and 4.0 to 100 ng ml(-1) of nitrate. The influences of potential interfering cations and anions for nitrite and nitrate determination were studied. The method is successfully applied for food and water samples. Up to ten samples can be analyzed per hour.     

Capillary zone electrophoresis for the determination of light-absorbing anions in environmental samples.

A rapid and simple method for separation and determination of inorganic anions by capillary zone electrophoresis was described. The detection was carried out directly with a diode array detector. The experimental conditions, such as concentration of carrier electrolyte, capillary length, voltage, and temperature were optimized. In order to improve selectivity, different organic modifiers were also investigated. The baseline separation of 10 light-absorbing anions was accomplished within 3.5 min with a background electrolyte consisting of 50 mM sodium tetraborate containing 5% MeOH. Linear plots were obtained in the concentration range of 0.1-10 microg/ml. With sample stacking injection, the quantitation limits of the anions were found to be in the range of 0.02-0.1 microg/ml. The proposed method was successfully applied to the determination of inorganic anions in environmental samples and in effluents of a power plant.     

Trace determination of iodide by derivatization and electron-capture gas chromatography

Summary A simple, sensitive and specific method is described for the determination of iodide as pentafluorobenzyl iodide, based on the chemical derivatization of iodide anion with pentafluorobenzyl bromide. The derivative formed in the reaction solution was directly analyzed, without further pretreatment, by gas chromatography with an electroncapture detector. The detection limit was about 1 ng of iodide anion in 0.10 ml of aqueous sample analyzed. Interferences of some common anions with the method were investigated and were proved to be minimal. It was demonstrated that the proposed method is applicable to the determination of iodide in spring water.

---

Bestimmung von Iodidspuren durch Derivatisierung und Electron-Capture GC

Zusammenfassung Eine einfache, empfindliche und spezifische Methode wird beschrieben zur Iodidbestimmung als Pentafluorbenzyliodid, die auf der Reaktion von Iodid mit Pentafluorbenzylbromid beruht. Das gebildete Derivat wird direkt ohne weitere Vorbehandlung der GC mit Electron-Capture-Detektion unterworfen. Die Nachweisgrenze liegt bei etwa 1 ng Iodid in 0,1 ml. Störungen durch andere Anionen wurden untersucht und erwiesen sich als unbedeutend. Das Verfahren wurde zur Iodidbestimmung in Quellwasser angewendet.

     

Anion chromatography using on-line recycled eluents

Non-suppressed anion chromatography, using on-line recycled eluents, was investigated. Cations and anions from samples were excluded from the eluents using a mixture of strongly acidic cation-exchange resins and strongly basic anion exchange resins in the eluent reservoir. This exclusion was performed after determination of the anions in the non-suppressed anion chromatography, and the eluents were then recycled on-line. The performance of consecutive determinations was evaluated from the relative standard deviation (RSD) of peak heights and retention times of chloride, bromide, nitrite, nitrate, and sulfate ions, with a concentration of 3 microg ml(-1) each, compared to that of normal anion chromatography. Over 50 consecutive determinations could be achieved with an eluent volume of only 200 ml for a 100 microl sample volume. Almost all the RSD values for retention time, and peak heights of these anions, were smaller than 3%. Over fifty consecutive determinations of chloride, nitrate, and sulfate ions in a river water sample could be achieved with an eluent volume of only 100 ml. All the RSD values for retention time and peak heights of these anions were smaller than 3%. The eluent volume could be decreased to one tenth of that used in normal anion chromatography. The performance of the anion chromatography, using on-line recycled eluents, was the same as that for normal anion chromatography under the same conditions.     

Speciation of Cr(III) and Cr(VI) and separation of common anions by ion pair chromatography with trans-1,2-diaminecyclohexane-N,N,N',N'-tetraacetic acid

A reversed phase ion pair chromatographic method for the simultaneous determination of Cr species and common anions on a C(18)-bonded stationary phase was developed by using acetonitrile-water (2:98 v/v) containing 1.0 mM tetrabutylammonium hydroxide and 0.5 mM trans-1,2-diaminecyclohexane-N,N,N',N'-tetraacetic acid (DCTA) at pH 6.5 as mobile phase and UV-detection at 210 nm. Chromatographic parameters were optimized for separation of Cr(III)-DCTA complex, chromate and other anions. The detection limits were found as 8 ng/ml for Cr(III) and 35 ng/ml for Cr(VI). Under the optimum conditions, most other ions did not interfere. The method can be applied to separate a number of common anions simultaneously with the separation of Cr(III) and Cr(VI).     

On-line deproteinization of serum sample for HPLC analysis of hydrophilic compounds and its application to gentamicin

Summary The binding of serum proteins with Butyl Toyopearl (BT) 650-M has been investigated and applied to on-line deproteinization for the HPLC determination of gentamicin components, c₁, c_1a, c₂, in serum. It was found that in 0.4% perchloric acid medium about 36mg of BSA was adsorbed on 1ml of wet gel. Under this condition hydrophilic components such as gentamicin passed through the pre-column packed with BT 650-M, while serum proteins and hydrophobic components were trapped in the pre-column. The ion pair between gentamicin components and pantanesulfonate anion was effectively trapped in a reversed-phase analytical column. It was then eluted and fluorometrically determined by post-column derivatization with o-phthalaldehyde. The recovery was quantitative with good reproducibility at therapeutic concentrations in sera. Several clinical samples were analyzed by the method.     

Solvation of complexes with strong symmetric H bonds in the methanesulfonic acid—2-pyrrolidone system

Multiple Attenuated Total Reflectance (MATR) IR spectra of solutions of methanesulfonic acid (MSA) in 2-pyrrolidone (Pyr) (0—100 % MSA) were examined at 30 °C. Depending on the ratio of components, two types of species with strong symmetric H bonds are formed: uncharged quasi-ion pairs of 1 : 1 composition and anions (AHA)^–. The solvation of quasi-ion pairs by base molecules and of the (AHA)^– anions by acid molecules was detected. The data on the influence of the hydrogen bond donor and acceptor on the IR spectra of the quasi-ion pairs and (AHA)^– anions are presented.     

Determination of thiosulfate, thiocyanate and polythionates in a mixture by ion-pair chromatography with ultraviolet absorbance detection

A sensitive ion chromatographic method has been developed for the determination of mixtures of thiosulfate, thiocyanate and polythionates (tri-, tetra-, penta- and hexathionate). The proposed method is based on the separation of the sulfur anions on an octadecylsilica (ODS) column with an acetonitrile-water mobile phase containing tetrapropylammonium salt (TPA) as an ion-pairing reagent and the ultraviolet absorption detection of the sulfur anions. When an acetonitrile-water (20:80, v/v) solution (pH 5.0) containing 6 mM TPA was used as a mobile phase at flow-rate of 0.6 ml min(-1), the sulfur anions were resolved within 22 min. The detection limits defined at S/N=3 and 230 nm were very low for all anions, except trithionate: 30 nM for thiosulfate, 60 nM for thiocyanate, 20 nM for tetrathionate, 15 nM for pentathionate and 18 nM for hexathionate. The proposed method gave recoveries ranging from 95.0 to 105.0% when applied to the determination of polythionates added to hot spring waters.     

Capillary electrophoretic determination of inorganic selenium species

The performance of pyromellitic electrolyte for capillary zone electrophoresis of inorganic selenium species in the presence of selected common anions with indirect UV detection was investigated. The separation was achieved with pyromellitic electrolyte at pH 8.8 and hexamethonium hydroxide as the electroosmotic flow modifier. Obtained detection limits of 0.17 microg ml(-1) for Se(VI) and 0.29 microg ml(-1) for Se(IV) were improved by a factor of 5-7 in comparison with chromate electrolyte, which has been mainly employed for selenium analysis. Good resolution for nitrate-Se(VI) peaks were obtained.     

Simultaneous determination of phenolphthalein and phenolphthalein glucuronide from dog serum, urine and bile by high-performance liquid chromatography.

A procedure is described to simultaneously quantitate phenolphthalein and its glucuronide metabolite from dog serum, urine and bile using high-performance liquid chromatography. The major advantages of this over pre-existing methods include direct analysis of the parent compound and glucuronide metabolite without enzymatic hydrolysis, increased sensitivity and the potential for automation of a large number of samples. Analytes were extracted from serum and urine using a combination of liquid- and solid-phase extraction methodology. Bile samples were analyzed directly after a twenty-fold dilution with mobile phase. The components plus internal standard were separated by reversed-phase high-performance liquid chromatography using step gradient elution and quantitated by the absorbance of ultraviolet light at 230 nm. Limits of detection from 1 ml of serum, 0.1 ml of urine and 0.05 ml of bile were 0.1, 0.5 and 10 microgram/ml for phenolphthalein and 0.1, 10 and 50 microgram/ml for phenolphthalein glucuronide, respectively.     

Solid-liquid extraction and preconcentration of trace nickel using 2-nitroso-1-naphthol-4-sulfonic acid (Nitroso-S) and TDBA onto benzophenone and determination by atomic absorption spectrometry.

Nickel was quantitatively retained by 2-nitroso-1-naphthol-4-sulfonic acid (Nitroso-S) and tetradecyldimethylbenzylammonium chloride (TDBA Cl) onto benzophenone in the pH range 5.0-6.0 from large volumes of aqueous solutions of various samples. After filtration, each solid mass consisting of a nickel complex and benzophenone was dissolved with 5 ml of dimethylformamide (DMF) and the metal was determined by atomic absorption spectrometry (AAS). About 0.6 microg of nickel could be concentrated from 200 ml of an aqueous sample, where its concentration was as low as 3.0 ng/ml. Eight replicate determinations of 2.5 microg/ml of nickel in the final DMF solution gave a mean absorbance of 0.112 with a relative standard deviation of 1.9%. The sensitivity for 1% absorption was 98 ng/ml. The interference of a number of anions and cations was studied and the developed optimized conditions were utilized for the trace determination of nickel in various alloys and biological samples.     

Determination of arsenic in wheat flour by electrothermal atomic absorption spectrometry using a continuous precipitation-dissolution flow system

A precise, accurate automatic preconcentration method for the determination of total arsenic at the ng g(-1) level in wheat flour is proposed. The sensitivity of the method can be increased by a factor of 20 by precipitating As(V) from 10 ml of digested sample using a weakly acid silver solution. The Ag(3)AsO(4) precipitate is dissolved with 0.5 ml of 6 M ammonia and the resulting solution is collected in an autosampler cup of the ETAAS instrument. The limit of detection achieved in the determination of total arsenic using Pd(NO(3))(2) as modifier is 0.3 ng ml(-1). The proposed method avoids spectral interferences from cations as they do not precipitate with silver cation; anions, which are coprecipitated with silver, are tolerated at concentrations up to about 10 000 times that of As(V). The need to determine As at very low levels in wheat samples, where chloride and phosphate can occur at concentrations 50 000 and 300 000 times higher, respectively, that of arsenic, requires additional steps to suppress the interference of both anions.     

Einfache automatische argentometrische Bestimmung von 40–1500 nÄq Halogenidionen mit Hilfe einer ionenspezifischen Elektrode

The Titration is carried out in 50 ml of 75% acetic acid. The standard deviation depends on the sample and is in most cases better than 1% rel. Among the generally occurring anions only sulphide interferes.     

Kinetic spectrophotometric determination of traces of sulfide

A method for the determination of sulfide based on the addition reaction of sulfide with magenta at pH 7 and 25 degrees C is described. The decrease in absorbance of magenta at 540 nm, its lambda(max), over a fixed time is proportional to the concentration of sulfide over the range of 25-2500 ng ml(-1). The limit of detection was found to be 15 ng ml(-1). Ten replicate analysis of a sample solution containing 1.5 mug ml(-1) sulfide gave a relative standard deviation of 0.8%. The effects of various cations and anions on sulfide determination have been reported and procedures for removal of interferences have been described.     

Simultaneous Ion Chromatographic Determination of Weakly and Strongly Retained Inorganic Anions using Aminoacids as Eluents

Abstract

At present eluents that are most widely used in ion chromatography of inorganic anions are salts with carbonate and hydroxyl eluting ions. But these eluents appear to be of no efficiency when samples containing both weakly and strongly retained inorganic anions are to be analyzed. In this case, one should use either expensive and complicated gradient elution technique or double injection with different eluents separately for weakly and strongly retained anions.

In this work, the simultaneous ion chromatographic determination of weakly and strongly retained inorganic anions without gradient elution is considered. The most common eluent for ion chromatography of anions, carbonate and aminoacids are compared. Dependence of the chromatographic behaviour of the strongly retained inorganic anions upon the concentration of the organic components in the eluent is shown.     

Preconcentration of copper(II) on immobilized 8-quinolinol in a flow-injection system with an ion-selective electrode detector

A column containing 8-quinolinol, immobilized on porous glass, is used for preconcentration and medium exchange in a flow-injection system with a copper ion-selective electrode detector. The metal ions are bound to the chelating ion exchanger while the anions and inert sample components pass to waste without contacting the electrode. Acid is then injected to elute the ions into a neutralizing buffer passing the electrode. Matrix effects are thus reduced because all measurements are made in the same buffer. The detection limits are 10^?7 and 3 × 10^?8 M copper(II) for sample volumes of 5 and 25 ml, respectively. The maximum throughput is 12 and 5 samples h^?1 for the two stated injection volumes.     

Electrodialysis for clean-up of strongly alkaline samples in ion chromatography

An electrodialysis method is described for the off-line neutralization of strongly alkaline samples containing trace levels of common inorganic anions. This method uses an electrodialysis cell comprising three compartments separated from each other by cation-exchange membranes. These compartments comprise an anode compartment housing, a platinum wire anode and 10 ml of a suitable hydrogen ion donating medium, a sample compartment which contains 1 ml of the alkaline sample, and a cathode compartment housing a platinum wire cathode and a dilute solution of sodium hydroxide. During electrodialysis at either constant applied current or constant applied power, hydrogen ions from the anode compartment displace sodium ions from the sample, thereby effecting neutralization.

Experimental parameters, such as the magnitude of the applied current or power, the type of cation-exchange membrane used and the design of the cell have been studied and optimum results were obtained using a Neosepta CM-2 membrane, of area 616 mm² supported between two perspex discs, with an applied current of 150 mA or applied power of 3 W. Under these conditions, a 1 ml sample of 1 M sodium hydroxide could be neutralized in 11 min. The most effective hydrogen ion donating medium consisted of a 2:1 (w/v) slurry of BioRad AG 50W-X8 (200–400 mesh, H⁺ form) cation-exchange resin in 1 mM octanesulfonic acid. Recoveries of solute anions (3–10 μg/ml) from the dialysed solution were close to quantitative, except for fluoride and nitrite, which gave recoveries of less than 60%. It is suggested that low recoveries for these ions are due to formation of neutral, protonated species within the membrane with subsequent loss by diffusion.     

Spectrophotometric determination of micro amounts of uranium

Uranium(VI) in the presence of numerous cations and anions is determined by the iron(II)-phosphoric acid-Ferrozine method at concentrations of 8-75,mug/25 ml with a relative precision of 3-1%.