Synthesis of nonaphenylenes and dodecaphenylenes using electron-transfer oxidation of Lipshutz cuprates and formation of nanostructural materials from hexadodecyloxynonaphenylene

Nonaphenylenes and dodecaphenylenes have been synthesized by using electron-transfer oxidation of Lipshutz cuprates with duroquinone. Oxidation of the Lipshutz cuprate derived from 4,4'-dibromo-o-terphenyl 3a in THF produced nonaphenylene 1a in 46% yield, whereas the similar oxidation of the Lipshutz cuprates derived from 4,4'-diiodo-4',5'-dialkyl-o-terphenyls 3b-d in ether afforded the corresponding nonaphenylenes 1b-d and dodecaphenylenes 2b-d in moderate total yields. In the case of 4,4'-diiodo-4',5'-didodecyloxy-o-terphenyl 3e as the starting material, oxidation of the corresponding Lipshutz cuprate in ether or THF only led to the formation of nonaphenylene 1e. Both nonaphenylenes 1a-e and dodecaphenylenes 2b-d are unreactive to light, atmospheric oxygen, and prolonged heating. These oligophenylenes showed strong UV absorption and fluorescent emission and exhibited some redox properties on CV analysis. Moreover, hexadodecyloxynonaphenylene 1e exhibits different nanostructures on the surface and in solution to form a film by casting a solution of 1e in cyclohexane, benzene, chloroform, THF, or diisopropyl ether (IPE) and nanofibers from IPE-MeOH (1:1), indicating different absorption and emission spectra and XRD patterns. The absorption maxima of THF solution, fiber, and film are in the order of 1e film (315 nm) > fiber (302 nm) > solution (295 nm), whereas the emission maxima are in the order of 1e fiber (425 m) > solution (418 nm) > film (401 nm). XRD analysis revealed that 1e aligns laterally on a glass or silicon surface to form a thin film with a lamella structure; however, it forms a nanofiber with a Lego-like stacking structure without pi-pi stacking interaction of the aromatic rings. Reflecting the different nanostructures of the 1e film and fiber, a spin-coated 1e film is found to be effective in detecting the vapor of explosives due to the intercalation of nitroaromatics to the cracked surface of the loosely stacked 1e. In contrast, the 1e fiber is not effective in detection of nitroaromatics but exhibits fluorescence anisotropy. The maximum fluorescence intensity is obtained in a direction perpendicular to the longitudinal axis of the fiber, indicating the stacking direction to be parallel to the longitudinal axis of the fiber.     

Homogeneous and heterogenized Au(III) Schiff base-complexes as selective and general catalysts for self-coupling of aryl boronic acids

A series of homogeneous and heterogenized gold metal complexes show high activity and selectivity for the homocoupling of a large variety of aryl boronic acids, being of general utility for the synthesis of C2-symmetric biaryls.     

Ring and nitrogen inversion in a flexible highly symmetrical molecule: The conformations of 1,3,7,9,13,15,19,21-octaazapentacyclo[19,3,1,1,3,7,19,13,115,19]

The possible conformations of the title compound and their modes of interconversion via ring and nitrogen inversion processes are delineated. At high temperatures (> +80°) the ¹H NMR spectra are consistent with time averaged D_4th symmetry and rapid ring and nitrogen inversion. At lower temperatures (ca. ?10°) the time-averaged symmetry if D_2d and inversion of the 6-membered rings is frozen out, nitrogen inversion remaining rapid. The free energy of activation for the total inversion of all four 6-membered rings is 13·5 kcal mole ^?1, higher than in similar monocyclic systems. This higher energy is a reflection of the multiple ring inversion pathway required for total inversion of all the 6-membered rings.     

5,10:8,9-Disecosteroids (= Steroklastanes): A new type of modified steroids

Thermolysis of steroidal 5α, 8α- peroxides of type 3a-d generates as major products the corresponding diseco compounds containing a 14-membered ring instead of the standard A-B-C-ring skeleton. Depending on the reaction conditions, either the primary products of type 9 or the α, β-unsaturated ketones of type 4 , formed by subsequent elimination of AcOH, are isolated. The latter, configurationally uniform compounds undergo epoxidation of the C(9)=C(10) bond followed by a Baeyer-Villiger oxidation to give, as final products, the 15-membered cyclic epoxyenol lactones of type 20 and 21 . The structures of the various products were determined by ¹H- and ¹³C-NMR spectroscopy. The conformations of the 14- and 15-membered rings were established by X-ray structure analyses of 7 and 21a . A reaction mechanism for the above transformations is discussed.     

Novel electron-transfer oxidation of Lipshutz cuprates with 1,4-benzoquinones: an efficient homo-coupling reaction of aryl halides and its application to the construction of macrocyclic systems

The electron transfer reaction from Lipshutz cuprates, which can be easily prepared from aryl bromides, to 1,4-benzoquinones was found to proceed smoothly, affording either the corresponding homo-coupling products, in modest to excellent yields, or macrocyclic products selectively.     

An enaminone-directed benzannulation/macrocyclization approach to cyclophane ring systems

A straightforward and modular preparative approach to 1,3,5-triaroylbenzene-based functionalized cyclophane ring systems has been developed. The key cyclophane-forming macrocyclization reaction was accomplished during the course of a regioselective cross-benzannulation between bis(aryl ethynyl) ketone and enaminone reactants. Macrocyclic products with ring sizes ranging from 18- to 22-membered were successfully constructed. The composition of the tether connecting the two aryl ethynyl ketone fragments can be easily varied; consequently, this method is suitable for construction of a diverse range of structurally distinct cyclophane products. To illustrate this feature, cyclophanes possessing xylyl, alkyl, di(ethylene triamine), and di(ethylene oxy) bridging units were synthesized in isolated yields of 11-46%. Three new cyclophanes (calixarene-like macrocyles 8 and 9, as well as crownophane 18) were structurally characterized by X-ray diffractometry.     

Regioselective intramolecular oxidation of phenols and anisoles by dioxiranes generated in situ

A novel method for regioselective oxidation of phenols and anisoles has been developed in which dioxiranes, generated in situ from ketones and Oxone, oxidize phenol derivatives in an intramolecular fashion. A series of ketones with electron-withdrawing groups, such as CF(3), COOMe, and CH(2)Cl, were attached to phenols, anisoles, or aryl rings via a C(2) or C(3) methylene linker. In a homogeneous solvent system of CH(3)CN and H(2)O, oxidation of phenol derivatives 1-10 afforded spiro 2-hydroxydienones in 24-55% yields regardless of the presence of other substituents (ortho Me, meta Me or Br) on the aryl ring and the length of the linker. Experimental evidences were provided to support the mechanism that involves a regioselective pi bond epoxidation of aryl rings followed by epoxide rearrangement and hemiketal formation.     

Structure and stability of the defect fullerene clusters of C60: C59, C58, and C57

We have performed density functional calculations for the structures and stabilities of various isomers of the defect fullerene clusters of C(60): C(59), C(58), and C(57). The C(59_)5-8, C(58_)5-5-7, and C(57_)4-5-9 clusters were calculated to be the most stable isomers of the C(59), C(58), and C(57) clusters, respectively. There are obvious relationships between structure and stability of the defect fullerene clusters. First, an unsaturated carbon atom favors being located at a 6-membered ring rather than a 5-membered ring. Second, the most stable isomers prefer to have newly formed 5-membered rings, rather than newly formed 4-membered rings.     

Molecular saddles. 7. New 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene cyclophanes: synthesis, redox properties, and x-ray crystal structures of neutral species and a dication salt

We report the synthesis of cyclophanes 18-20 by ester-forming macrocyclization reactions of diols 15 and 16 with 1,4-benzenedicarbonyl chloride. Compounds 18 and 19 display a two-electron, quasireversible oxidation wave in the cyclic voltammogram to yield the dication species at E(ox)(pa) 0.52 and 0.47 V, respectively (vs Ag/AgCl in acetonitrile), whereas the 2 + 2 product 20 undergoes a single four-electron oxidation process at E(o)(x)(pa) 0.51 V. X-ray crystal structures are reported for compounds 18-20 and the dication salt 18(2+)(I(3)(-))(2).(I(2))(0.5). For comparative purposes, the structures are also reported for the precursor diol 15 and its dication salt 15(2+)(ClO(4)(-))(2), which was obtained by electrocrystallization. In the neutral cyclophanes 18-20, the 9,10-bis(1,3-dithiol-2-ylidene)-9, 10-dihydroanthracene moieties adopt a saddle-shaped conformation. The overall measure of folding, the dihedral angle (theta) between the S(1)C(16)C(17)S(2) and S(5)C(21)C(22)S(6) planes, is similar in 15 and 18 (87.6 degrees and 83.7 degrees, respectively) whereas this angle is significantly narrower in 19 (61.1 degrees ), illustrating the flexibility of the saddle conformation and its dependence on the packing. Dimeric molecule 20 contains two saddle moieties with very similar conformations, theta = 73.4 degrees and 73.1 degrees. The structures of dication salts 15(2+)(ClO(4)(-))(2) and 18(2+)(I(3)(-))(2).(I(2))(0.5) reveal that a dramatic conformational change accompanies oxidation of the donor with the dithiolium rings planar and nearly perpendicular to the mean plane of the anthracene moieties. A notable feature of 18(2+) is that the bridge enforces a fold of 22 degrees along the C(9).C(10) vector of the anthracene unit. In 15(2+) there is no fold about this axis, instead the anthracene moiety is slightly twisted with the two (planar) outer rings forming an angle of 7 degrees.     

Nucleophilic addition to electron-rich heteroaromatics: dearomatizing anionic cyclizations of pyrrolecarboxamides

[reaction: see text] Despite its electron-rich nature, a pyrrole ring is susceptible to intramolecular nucleophilic attack by organolithiums. The resulting dearomatizing anionic cyclization yields new 5- or 7-membered heterocyclic rings. Formation of a new 5-membered ring, by cyclization of an N-benzylpyrrolecarboxamide, is accompanied by ring opening of the original pyrrole to yield 3-aminovinylpyrrolinones. Formation of a new 7-membered ring, by cyclization of an N-allyl pyrrolecarboxamide, yields bicyclic pyrroloazepinones.     

The acid-mediated ring opening reactions of α-aryl-lactams

4-Aryl-azetidin-2-ones (β-lactams) undergo ring opening with triflic acid to give cinnamamides which, in benzene, react further to give 3-aryl-3-phenyl-propionamides. Prolonged reaction times in benzene give 3,3-diphenyl-propionamide via an aryl/phenyl exchange. Lactams of ring size 7 and higher also ring open, but only 7- and 8-membered rings give pure diphenylalkylamides. AlCl(3) only ring opens the 4-aryl-azetidinones.     

Spannungsenergie und konformation sterisch gehinderter olefine berechnungen von überbrückten derivaten des tetra-tert-butylethylens

Strain energy relaxation by in plane bending is not eflective in tetra-tert-butylethyethylene 1 because of the repulsions between geminal tert-butyl groups. When rings are closed between the geminal tert-butyl groups, the repulsions across the double bond are relieved. The strain energies and conformations of such molecules have been evaluated by empirical force field calculations (molecular mechanics) A close correlation is found between ring size and strain energy: strain increases stepwise with ringsize. In the most stable conformations, the methyl groups adopt a “staggered” arrangement across the double bond. In compounds containing a six-membered ring this can be achieved only in (strongly preferred) twist-boat conformations. The double bond in such molecules is nearly planar when the rings are smaller than 6-membered, but exhibits a torsion of up to 16.5° when 6-membered rings are present.     

Comparison of ab initio,semiempirical, and molecular mechanics calculations for the conformational analysis of ring systems

The potential energy surfaces of four cyclic alkanes have been examined using molecular mechanics, semiempirical, and ab initio methods to determine if they produce mutually consistent results and investigate the source of any errors between the methods. The C₅ ? C₈ cyclic alkanes were chosen since these structures present a finite set of conformations and transition-state geometries and are still within the computational time and memory limits of the quantum mechanical approaches. We also examined several conformations of 1,2-dideoxyribose to determine the effect of heteroatoms on the results for the 5-membered ring. The molecular mechanics and ab initio calculations are consistent in the relative energies and geometries determined for the conformers of all ring systems. While the semiempirical calculations yielded geometries consistent with the other methods (except for 5-membered rings), the relative energies often deviated substantially. A decomposition analysis of the semiempirical and molecular mechanics energies revealed that the disparities are mainly due to errors in the 1-center energies of the semiempirical calculations. The 2-center bonding and nonbonding energies followed reasonable trends for the conformers. The core-repulsion function, however, is suspected of producing anomalies. A minimum in the attractive Gaussian of this term at 2.1 Å for H? H interactions partly explains the propensity of the 5-membered rings to optimize to near planarity (decreasing 1,2-diaxial hydrogen distances to 2.3 Å) and the underestimation of the relative energy of the boat structure of cyclohexane.     

Azolium-linked cyclophanes: effects of structure, solvent, and counteranions on solution conformation behavior

This paper describes the synthesis, structural characterization, and solution behavior of some xylyl-linked imidazolium and benzimidazolium cyclophanes decorated with alkyl or alkoxy groups. The addition of alkyl/alkoxy chains to the cyclophanes allows for studies in chlorinated solvents, whereas previous solution studies of azolium cyclophanes have generally required highly polar solvents. The azolium cyclophanes may exist in a syn/syn conformation (azolium rings mutually syn, arene rings mutually syn) or a syn/anti conformation (azolium rings mutually syn, arene rings mutually anti). The preferred conformation is significantly affected by (i) binding of bromide (ion pairing) to the protons on the imidazolium or benzimidazolium rings, which occurs in solutions of bromide salts of the cyclophanes in chlorinated solvents, and (ii) the addition of alkoxy groups to the benzimidazolium cyclophanes. These structural modifications have also led to cyclophanes that adopt conformations not previously identified for similar azolium cyclophane analogues. Detailed (1)H NMR studies for one cyclophane identified binding of bromide at two independent sites within the cyclophane.     

THE CRYSTAL STRUCTURE OF PSEUDOLARIC ACID D

<正> Mr=318.46, orthorhombic, P212121, a=6.921(2), b=10.175(2), c= 25.036(5) A, Z=4, Dc=1.200 g.cm-3, V=1763.0 A3, final R=0.057 for 1451 observed reflections. The rings A and B take chair conformations, so is the ring C approximately. The ring D takes envelop conformation. The rings A and B are trans-fused in the structure.     

Oligosaccharide analogues of polysaccharides. Part 14:. Carbocyclic cyclodextrin analogues. Synthesis of all trimeric and tetrameric isomers by homo- and heterocoupling of 1,4-cis-diethynylated 1,5-anhydroglucitols

Hetero- or homocoupling of protected 1,4-cis-diethynylated 1,5-anhydroglucitols leads to two isomeric cyclotrimers and to four isomeric cyclotetramers. The C₃-symmetric cyciotrimer 31 , the C₄-symmetric cyclotetramer 35 , and the D₂-symmetric cyclotetramer 6 have been prepared before. We have now synthesized the C₁-symmetric cyciotrimer 13 , and the C₁- and the C₂-symmetric cyclotetramers 22 and 27 , respectively. The cyclotrimer 13 was prepared by intramolecular, oxidative homocoupling and, alternatively, by a one-pot trimerization/cyclization of the monomer 36 (Schemes 1 and 5, resp.). Oxidative homocoupling was used for the cyclization of the tetramers 19 and 25 , leading to 22 and 27. The tetramer 19 was made by sequential Cadiot-Chod-kiewicz coupling (Scheme 2)and the tetramer 25 by a combination of a Cadiot-Chodkiewicz reaction and an intermolecular, oxidalive homocoupling (Scheme 3). The acetates 34 and 38 , corresponding to 35 and 27 , respectively, were also made by a one-pot dimerization/cyclization of the dimer 37 (Scheme 5). Intramolecular oxidative heterocoupling is also feasible and results in an alternative, more convenient synthesis of the acetylated cyclotrimer 30 and the acetylated cyclotetramer 34 (corresponding to 31 and 35 , resp.; Scheme 4). The solid-state conformation of the C₄-symmetric cyclotetramer 34 corresponds well to the one predicted by force-field calculations. We compared the water-solubilities of the cyclotrimers 13 and 31 and the tetramers 6, 22, 27 , and 35 , their calculated conformations (MM3*), and the D -adenosine binding properties of the cyclotetramers 6, 27 , and 35 .     

Synthesis and conformational studies of peptidomimetics containing furanoid sugar amino acids and a sugar diacid

Furanoid sugar amino acids (1) were synthesized and used as dipeptide isosteres to induce interesting turn structures in small linear peptides. They belong to a new variety of designed hybrid structures that carry both amino and carboxyl groups on rigid furanose sugar rings. Four such molecules, 6-amino-2,5-anhydro-6-deoxy-D-gluconic acid (3, Gaa) and its mannonic (4, Maa), idonic (5, Iaa), and a 3,4-dideoxyidonic (6, ddIaa) congeners were synthesized. The synthesis followed a novel reaction path in which an intramolecular 5-exo S(N)2 opening of the hexose-derived terminal aziridine ring in 2 by the gamma-benzyloxy oxygen with concomitant debenzylation occurred during pyridinium dichromate oxidation of the primary delta-hydroxyl group to carboxyl function, leading to the formation of furanoid sugar amino acid frameworks in a single step. Incorporation of these furanoid sugar amino acids into Leu-enkephalin replacing its Gly-Gly portion gave analogues 8-11. Detailed structural analysis of these molecules by circular dichroism (CD) and various NMR techniques in combination with constrained molecular dynamics (MD) simulations revealed that two of these analogues, 8a and 10a, have folded conformations composed of an unusual nine-membered pseudo beta-turn-like structure with a strong intramolecular H-bond between LeuNH --> sugarC3-OH. This, in turn, brings the two aromatic rings of Tyr and Phe in close proximity, a prerequisite for biological activities of opioid peptides. The analgesic activities of 8a,b determined by mouse hot-plate and tail-clip methods were similar to that of Leu-enkephalin methyl ester. The syn disposition of the beta-hydroxycarboxyl motif on the sugar rings appears to be the driving force to nucleate the observed turn structures in some of these molecules (8 and 10). Repetition of the motif on both sides of a furanose ring resulted in a novel molecular design of sugar diacid, 2,5-anhydro-D-idaric acid (7, Idac). Bidirectional elongation of the diacid moieties of 7 with identical peptide strands led to the formation of a C2-symmetric reverse-turn mimetic 12 which displayed a very ordered structure consisting of identical intramolecular H-bonds at two ends between LeuNH --> sugar-OH, the same as in 8 and 10.     

Molecular saddles. 4. Redox-active cyclophanes by bridging the 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene system: synthesis, electrochemistry, and X-ray crystal structures of neutral species and a dication salt.

We report the synthesis of a new series of cyclophanes 11a-d by ester-forming macrocyclization reactions of diol 9 with the dicarbonyl chloride derivatives of benzene, thiophene, ferrocene, and diphenyl ether, 10a-d, respectively. Compounds 11a-d display a two-electron, quasireversible oxidation wave in the cyclic voltammogram to yield the dication species at Eoxpa = 0.70-0.72 V (for 11a-c) and 0.47 V (for 11d) (vs Ag/AgCl in acetonitrile). The raised oxidation potentials for 11a-c reflect the reduced stability of the twisted dication structure within the steric constraints of the smaller cyclophanes. Consistent with this, the value of delta E (defined as Eoxpa - Eoxpc) decreases (i.e., reversibility of the oxidation process increases) in the sequence 11d > 11c > 11a > 11b as the bridging chain becomes shorter. X-ray crystal structures are reported for compounds 11a-d and the dication salt 11d2+(I3-)2.(CH2Cl2)2.25. For 11a-d the typical saddle-shaped conformation of the 9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracene moiety is observed, with the strain imposed by the cyclophane ring being accommodated in the structure of the bridging unit. In the dication 11d2+ both dithiolium rings are planar and the anthracene unit is essentially aromatic, with the conformation of the bridge basically the same as in neutral 11d.     

Synthesis of new crown ethers and their metal complexes: 1H and 13C NMR study

A new type of crown ethers containing a diphenyl ether unit has been prepared, the ring size ranging from 12 to 36. ¹H and ¹³C NMR spectra of both free ligands and their metal-ion complexes have been recorded. For 18- and 21-membered compounds a general downfield shift was observed for both methylene and aromatic proton resonances on metal-ion complexation. The stoichiometry of K⁺ and Na⁺ complexes was deduced from chemical shift dependence on metal-ion concentration. The K⁺ and Na⁺ complexes of 18- and 21-membered rings have a guest to host ratio of 1:1, whereas the K⁺ salt of the 15-membered ring exists as a 1:2 complex in solution. The ¹H shift observed on salt formation was attributed to electric-field and conformational effects. The ¹³C resonances for the aryl carbons, C-1, C-2 and C-3, and the α-methylene carbon in 15- and 18-membered rings were shifted upfield when an equivalent amount of KSCN was added in CDCI_3?DMSO-d₆. The shift changes were independent of the anion, and similar results were obtained for SCN^?, Br^?, and I^? salts. The upfield shift is explained by conformational factors. The spectral changes were slight for 12- and 36-membered rings. In 15- and 18-membered rings, complexation induces conformational changes which force the C-α carbon into the plane of the benzene ring. The solution conformation of these molecules is discussed.     

The regioselectivity of rhodium and palladium-catalysed cyclisations of 2-bromo-1,6- and -1,7-dienes

2-Bromo-l,6-dienes are catalytically cyclised to a mixture of the corresponding 3,4-bis(methylene)cyclopentane and 5-methylenecyclohex-3-ene. Wilkinson's catalyst shows good selectivity for the 5-membered ring product whilst palladium catalysts, in general, show little selectivity, Addition of tetraethylammonium salts, especially the chloride, allow the palladium catalysed reactions to be carried out at 30°C in good yield and with high selectivity for the 5-membered ring. 2-Bromo-1,7-dienes are cyclised regio-specifically to 6-membered rings by the same catalysts although some double bond isomerisation also occurs. The mechanism of the catalytic cyclisations is discussed. The 3,4-bis(methylene) cyclopentanes undergo facile Diels-Alder reactions.