Hydrogenation of chloronitrobenzenes over Pd and Pt catalysts supported on cationic resins

Liquid phase hydrogenation of chloronitrobenzene isomers (x-CNB x = 2, 3, 4) to the corresponding chloroanilines (x-CAN) at mild reaction conditions (0.6 MPa, 25°C, diethyl ether-methanol as solvents) over palladium and platinum catalysts containing 1 mass % of metal on trimethylammonium functionalized poly{styrene-co-divinylbenzene} (Dowex-D) was studied. The average selectivities to x-CAN over Pd/D-Cl and Pd/D-OH catalysts were 72 % and 42 %, respectively, at the x-CNB conversion of about 80 %. The average selectivities of 81 % and 84 % were achieved using Pt/D-Cl and Pt/D-OH, respectively, at the x-CNB conversion of approximately 90 %, whereas the average starting reaction rates were 1.2 × 10^?3 mol g^?1 s^?1 and 2.6 × 10^?3 mol g^?1 s^?1 (hydrogen consumption rate per mass of platinum), respectively. Under similar reaction conditions, using palladium catalysts supported on a resin with anionic groups anchored to polymeric chains at the average reaction rate equal to 3.8 × 10^?3 mol g^?1 s^?1 (hydrogen consumption rate per mass of palladium), the selectivities from 85 % (2-CAN and 3-CAN) to 95 % (4-CAN) were achieved (Kratky et al., 2002).     

Monodentate aminophosphine nickel(II)‐ and palladium(II)‐catalyzed ethylene oligomerization and norbornene polymerization

Nickel(II) and palladium(II) complexes of monodentate aminophosphine ligands were prepared and characterized. In ethylene oligomerization and subsequent Friedel–Crafts alkylation of toluene, the Ni(II) complexes Ni‐1 and Ni‐2 were activated with aluminium co‐catalysts and generated tandem catalysts with high activities (up to 1.1 × 10⁶ g (mol Ni)^?1 h^?1) which are comparable with those of previously reported bidentate Ni(II) catalysts. The Pd(II) precatalyst Pd‐1 showed high activities (up to 2.0 × 10⁵ g (mol Pd)^?1 h^?1) in the polymerization of norbornene.     

Palladium Single Atoms on TiO2 as a Photocatalytic Sensing Platform for Analyzing the Organophosphorus Pesticide Chlorpyrifos

Traditional methods for analyzing organophosphorus pesticide chlorpyrifos, usually require the tedious sample pretreatment and sophisticated bio‐interfaces, leading to the difficulty for real‐time analysis. Herein, we use palladium single‐atom (PdSA)/TiO₂ as a photocatalytic sensing platform to directly detect chlorpyrifos with high sensitivity and selectivity. PdSA/TiO₂, prepared by an in situ photocatalytic reduction of PdCl₄^2? on the TiO₂, shows much higher photocatalytic activity (10 mol g^?1 h^?1) for hydrogen evolution reaction than Pd nanoparticles (1.95 mol g^?1 h^?1), and excellent stability. In the presence of chlorpyrifos, the photocatalytic activity of PdSA/TiO₂ decreases. Through this inhibition effect the platform can realize a detection limit for chlorpyrifos of 0.01 ng mL^?1, much lower than the maximum residue limit (10 ppb) permitted by the U.S. Environmental Protection Agency.     

Mild and Selective Catalytic Hydrogenation of the C=C Bond in α,β‐Unsaturated Carbonyl Compounds Using Supported Palladium Nanoparticles

Chemoselective reduction of the C=C bond in a variety of α,β‐unsaturated carbonyl compounds using supported palladium nanoparticles is reported. Three different heterogeneous catalysts were compared using 1 atm of H₂: 1) nano‐Pd on a metal–organic framework (MOF: Pd⁰‐MIL‐101‐NH₂(Cr)), 2) nano‐Pd on a siliceous mesocellular foam (MCF: Pd⁰‐AmP‐MCF), and 3) commercially available palladium on carbon (Pd/C). Initial studies showed that the Pd@MOF and Pd@MCF nanocatalysts were superior in activity and selectivity compared to commercial Pd/C. Both Pd⁰‐MIL‐101‐NH₂(Cr) and Pd⁰‐AmP‐MCF were capable of delivering the desired products in very short reaction times (10–90 min) with low loadings of Pd (0.5–1 mol %). Additionally, the two catalytic systems exhibited high recyclability and very low levels of metal leaching.     

A Covalent Organic Framework–Cadmium Sulfide Hybrid as a Prototype Photocatalyst for Visible‐Light‐Driven Hydrogen Production

CdS nanoparticles were deposited on a highly stable, two‐dimensional (2D) covalent organic framework (COF) matrix and the hybrid was tested for photocatalytic hydrogen production. The efficiency of CdS‐COF hybrid was investigated by varying the COF content. On the introduction of just 1 wt % of COF, a dramatic tenfold increase in the overall photocatalytic activity of the hybrid was observed. Among the various hybrids synthesized, that with 10 wt % COF, named CdS‐COF (90:10), was found to exhibit a steep H₂ production amounting to 3678 μmol h^?1 g^?1, which is significantly higher than that of bulk CdS particles (124 μmol h^?1 g^?1). The presence of a π‐conjugated backbone, high surface area, and occurrence of abundant 2D hetero‐interface highlight the usage of COF as an effective support for stabilizing the generated photoelectrons, thereby resulting in an efficient and high photocatalytic activity.     

Facile fabrication of steam-exploded poplar loaded with non-metal-doped Ni-Fe nanoparticles: Catalytic activities in 4-nitrophenol reduction and electrocatalytic reaction

A simple and effective method for preparing a non-metallic ion-doped nickel-supported catalyst is reported. Using economical and recyclable fibre raw materials as carriers, nickel-supported catalysts were prepared by adsorption and reduction at room temperature. The nanoparticles dispersed and anchored on a rational support, efficiently inhibiting their aggregation and thus enhancing the catalytic activity. For the model catalytic hydrogenation of 4-nitrophenol by NaBH₄, the N-B-NiP/steam-exploded poplar (SEP) and N-B-Ni₅Fe₅P/SEP catalysts exhibited much better catalytic performances than the other recently reported catalysts in terms of the catalytic activity (the reaction was completed within 10 min for both aforementioned catalysts), reaction rate constant (0.19 and 0.344 min^?1, respectively) and the activity factor K (19 and 34.4 min^?1·g^?1, respectively). The catalysts showed activities for electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) under ambient conditions. In general, the reported preparation method of nickel-supported catalysts is convenient, economical and environment-friendly, and is agreement with many green chemistry and sustainable development principles; further, it employs widely available starting materials.     

Flow-injection spectrophotometric determination of palladium in catalysts and dental alloys with 2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropyl-amino)aniline

2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)aniline rapidly forms a water-soluble complex with palladium in an acetate-buffered medium at pH 3.2.The molar absorptivity of the complex is 9.84×10⁴l mol^?1 at 612 nm. The calibration graph is linear over the range of 10–100 μg l^?1 palladium; the detection limit is 2 μg l^?1 and the relative standard deviation is 0.6% for 100 μg l^?1 palladium. The sample throughput is 50 h^?1. Divalent transition metals (Fe, Ni, Co) do not interfere at levels from 2 to 10 mg l^?1. Interference from copper is prevented by adding 10^?3 M EDTA solution to the carrier stream. Palladium in solutions of catalysts and dental alloys can be determined selectively, sensitively and rapidly.     

Extraction-spectrophotometric determination of traces of palladium by reaction between zinc(II) dibenzyldithiocarbamate and palladium(II)/2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

The simple and highly sensitive determination of palladium is based on the reaction between Pd(II)/5-Br-PADAP and Zn(II) DBDTC complexes in 1,2-dichloroethane or toluene at pH 9.7. At 530 nm, the molar absorptivity is about 0.8 × 10⁵ l mol ^?1 cm ^?1. Beer's law is obeyed in the concentration range 0.1–1.2 μg ml ^?1 Pd. Relative standard deviations are 2–5%. Metal ions reacting with either of the organic reagents interfere.     

Pt/Pd/C catalysts with ultra low platinum content for oxygen reduction reaction

The activity of Pt/Pd/C ETEK catalysts of the core-shell type with an ultralow content of platinum (0.5–15 μg cm^?2) based on a commercial palladium catalyst is shown to exceed the activity of commercial Pt/C ETEK catalysts in the oxygen reduction reaction. The activity sharply increases with the decrease in the platinum content down to values corresponding to monolayer and submonolayer of platinum on palladium. This dependence wasn’t observed for the same amounts of platinum deposited on the carbon support Vulcan XC-72. This makes it possible to conclude that the most probable factor responsible for the high catalytic activity of Pt/Pd/C ETEK is the effect of palladium on the electronic properties of platinum rather than the effect of structural modification of the platinum deposit induced by the decrease in the platinum amount deposited on a foreign metal or a carbon support.     

Cloud-point extraction,preconcentration, and spectrophotometric determination of palladium in water samples

The possibility of using Thio-Michler's Ketone (TMK), 4,4′-bis(dimethylamino) thiobenzophenone, for palladium(II) concentrated by micellar extraction at the cloud-point temperature, and later spectrophotometric determination, was investigated. Under the optimum conditions, preconcentration of 50?mL of water samples in the presence of 0.1% (w/v) octylphenoxy polyethoxy ethanol (Triton X-114), 2?×?10^?6?mol?L^?1?TMK and 1?×?10^–3?mol?L^?1 buffer solution (pH?=?3.0) gave the limit of detection of 0.47?ng?mL^?1, and the calibration graph was linear in the range of 2–50?ng?mL^–1. The recovery under optimum working conditions was higher than 97%. The proposed method has been applied to the spectrophotometric determination of palladium(II) in natural water samples after cloud-point extraction with satisfactory results.     

Synthesis of gasoline from syngas via dimethyl ether

Zeolite H-TsVM has been loaded with palladium by different methods. The properties of the resulting catalysts in gasoline synthesis from syngas via dimethyl ether depend on the way in which palladium was introduced. The catalysts have been characterized by ammonia temperature-programmed desorption (TPD), temperature-programmed reaction with hydrogen, and X-ray photoelectron spectroscopy. According to ammonia TPD data, use of a palladium ammine complex instead of palladium chloride reduces the concentration of strong acid sites and raises the concentration of medium-strength acid sites, thereby reducing the yield of C1–C4 hydrocarbons and increasing the yield of gasoline hydrocarbons. At T = 340°C, P = 100 atm, and GHSV = 2000 h^?1, the dimethyl ether conversion is 98–99%, the gasoline selectivity is >60%, the isoparaffin content of the product is ～61%, and the arene content is not higher than 29%.     

A Novel Glucose Biosensor Based on Palladium Nanoparticles and Its Application in Detection of Glucose Level in Urine

IntroductionThelevelofglucoseinbloodorurineindicateshyper andhypoglycaemia ,bothofwhichcanresultfromavarietyofendocrinedisorders .1 4 Therapidandreliabledetermi nationofglucoselevelisaroutineprojectinclinicchem istry.Urinesamplesaresaferandmoreconvenientthanbloodones .Meanwhile ,theconcentrationofglucoseinserumiscloselyassociatedwiththatinurine .2 4 Eventhoughglucoseelectrodeshavebeensuccessfullyusedinseruminclinicalapplication ,thequestionstillremainedofhowtodetecttheglucoselevelinurine ,wh…     

Eumelanin as a support for efficient palladium nanoparticle catalyst for Suzuki coupling reaction of aryl chlorides in water

Eumelanin-supported palladium (Pd) nanoparticle (NP) catalysts was found to exhibit excellent catalytic activities with high turnover number (TON, 2000) and turnover frequency (TOF, 1000 h^?1) for Suzuki cross coupling reaction of aryl chlorides in water. We propose that the amphiphilic property of the eumelanin support helps Pd NPs to catalyse the C–C coupling reaction in water through hydrophobic effect.     

Polymerization of phenylacetylene by triethyl aluminum and titanium tetraethoxide

The polymerization of phenylacetylene to polyphenylacetylene was accomplished with the combined catalysts triethyl aluminum and titanium tetraethoxide. The progress of the reaction was monitored by gas chromatography. The parameters included temperature (?80, 25, 140°C), solvent (benzene, chlorobenzene, toluene, cyclohexane, and nitrobenzene), mole ratio of catalysts (Al/Ti; 1.5, 3.0, 4.5, 6.0, and 9.0), aging times of catalysts (2, 10, and 40 min), and order of addition of reagents. Derivatives of polyphenylacetylene were obtained by the acylation of polyphenylacetylene with p-nitrobenzoyl chloride, the sulfonation of polyphenylacetylene with benzenesulfonyl chloride, and the formation of polyphenylacetylene complexes with complexing agents such as bromine, iodine, iodine chloride, boron trifluoride, and ferric chloride. A new phenylacetylene-acetylene product mixture was produced by the polymerization of phenylacetylene and acetylene at 25 and ?80°C. The electrical conductivity of polyphenylacetylene and its derivatives is in the range of 10^?10?10^?3 Ω^?1 cm^?1.     

Analytical applications of 3-(2′-thiazolylazo)-2,6-diaminopyridine: Spectrophotometric determination of palladium

3-(2′-Thiazolylazo)-2,6-diaminopyridine reacts with palladium(II) in strongly perchloric acid media, to produce a blue 1:1 complex (λ_max = 665 nm, ? = 1.37 × 10⁴ liters · mol^?1 · cm^?1), which allows the spectrophotometric determination of 0.6 to 4.5 ppm of palladium. The method is applied to the determination of palladium in small samples of hydrogenation catalysts.     

Electron Transfer in Dye‐Sensitised Semiconductors Modified with Molecular Cobalt Catalysts: Photoreduction of Aqueous Protons

A visible‐light driven H₂ evolution system comprising of a Ru^II dye ( RuP ) and Co^III proton reduction catalysts ( CoP ) immobilised on TiO₂ nanoparticles and mesoporous films is presented. The heterogeneous system evolves H₂ efficiently during visible‐light irradiation in a pH‐neutral aqueous solution at 25 °C in the presence of a hole scavenger. Photodegradation of the self‐assembled system occurs at the ligand framework of CoP , which can be readily repaired by addition of fresh ligand, resulting in turnover numbers above 300 mol H₂ (mol CoP )^?1 and above 200,000 mol H₂ (mol TiO₂ nanoparticles)^?1 in water. Our studies support that a molecular Co species, rather than metallic Co or a Co‐oxide precipitate, is responsible for H₂ formation on TiO₂. Electron transfer in this system was studied by transient absorption spectroscopy and time‐correlated single photon counting techniques. Essentially quantitative electron injection takes place from RuP into TiO₂ in approximately 180 ps. Thereby, upon dye regeneration by the sacrificial electron donor, a long‐lived TiO₂ conduction band electron is formed with a half‐lifetime of approximately 0.8 s. Electron transfer from the TiO₂ conduction band to the CoP catalysts occurs quantitatively on a 10 μs timescale and is about a hundred times faster than charge‐recombination with the oxidised RuP . This study provides a benchmark for future investigations in photocatalytic fuel generation with molecular catalysts integrated in semiconductors.     

η3-Allylnickel alkoxides and their use as homogeneous and heterogeneous catalysts for the dimerization of olefins

η³-Allylnickel alkoxides {η³-C₃H₅NiOR}₂ (R = Me, Et, i-Pr, Ph, SiPh₃) may be activated by gaseous boron trifluoride (BF₃) to give active catalysts for the dimerization of propene in homogeneous phase. In CH₂Cl₂ at ?20 °C catalytic turnover numbers of 5000 mol propene(mol Ni)^?1h^?1 were measured. The nature of the OR group influences both the catalytic activity and the oligomerization product distribution. The ratio of methylpentenes to dimethylbutenes in the dimer fraction may be controlled by the presence of additional phosphine ligands at the nickel atom. The nickel alkoxide precursor was heterogenized on alumina to give {Al₂O₃}–O–Ni–(η³-C₃H₅). Subsequent activation using gaseous BF₃ generates a powerful heterogeneous olefin dimerization catalyst which converts 50 × 10³ mol propene (mol Ni)^?1 at ?10° to ?5°C in a batchwise process and 143 × 10³ mol propene (mol Ni)^?1 continuously to give 75% dimers and 25% higher oligomers. The solvent-free treatment of oxide supports, e.g. alumina or silica, with gaseous BF₃ produces strong ‘solid acids’. The activated hydroxyl groups on the support surface serve as effective anchor sites for organometallic complexes to form heterogenous catalysts. By reaction of Ni(cod)₂ with {Al₂O₃}O(BF₃)H or {SiO₂}O(BF₃)H, η¹, η²-cyclo-octenylnickel–O fragments may be fixed to the surface. In the absence of halogenated solvents, the resulting catalysts, e.g. {SiO₂}O–(BF₃)–Ni–(η¹, η²-C₈H₁₃), dimerize propene continuously at +5°C at the rate of 800 × 10³ mol liquid propene (mol Ni)^?1.     

Electrochemical determination of norepinephrine on the membrane of silver nanoparticles doped poly-glycine eliminating the interference of ascorbic acid

The silver nanoparticles doped poly-glycine composite membrane was prepared by cyclic voltammetry on the surface of the glassy carbon electrode (GCE). The morphology and electrochemical properties were characterized by scanning electron microscopy and cyclic voltammetry, respectively, and in detail, the electrochemical behaviors of the norepinephrine (NE) on this membrane were studied. The results showed that the membrane had good catalytic properties for the oxidative–reductive reaction of NE. NE had a couple of sensitive oxidative-reductive current peaks. The reductive peak currents were linearly with its concentration in the range of 1.90?×?10^?7 to 7.00?×?10^?6 and 7.00?×?10^?6 to 1.00?×?10^?4?mol l^?1, and the linear regressive equations were i _pc (A)?=?3.73?×?10^?6?+?0.70C (mol l^?1), i _pc (A)?=?9.83?×?10^?5?+?0.12C (mol l^?1), respectively, with the relate coefficient (r) of 0.9926 and 0.9944. The detection limit was 1.2?×?10^?7?mol l^?1 (S/N?=?3), which could be used to determine the content of NE and at the same time, eliminate the interference of the ascorbic acid (AA). The proposed method had high sensitivity, good selectivity and stability.     

Palladium(II) complexes of aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium

The formation of palladium(II) complexes with aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium has been studied. The spectrophotometric studies showed the formation of 1:1 and 1:2 complexes between palladium(II) and amine in absence of HClO₄. An increase in [HClO₄] in reaction mixture suppresses the complex formation and in presence of [HClO₄] ～10^?3 mol dm^?3 only a 1:1 complex between palladium(II) and amine has been observed. The effect of Cl^? on the complex formation has also been studied. Palladium(II)‐catalyzed oxidation of these amines by chloramine‐T showed a first‐order dependence of rate with respect to each—oxidant, substrate, catalyst, and H⁺. The mechanism consistent with kinetic data for the oxidation process has been proposed in absence as well as in presence of initial [Cl^?]. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 603–612, 2002     

Synthesis and properties of a CO oxidation catalyst based on plasma-chemical silicon carbide,titanium dioxide,and palladium

A catalyst based on plasma-chemical β-SiC and TiO₂ with a palladium content of 10 wt % has been synthesized. The dependence of the rate of the CO oxidation reaction at room temperature and low CO concentrations (less than 100 mg/m³) on the β-SiC content has been studied. It has been found that with a β-SiC content of 8 to 10 wt %, the catalyst has a maximum reaction rate, which is three times that on a catalyst based on pure TiO₂ including palladium clusters. The catalysts are promising for use in catalytic and photocatalytic air purification systems.