Kinetics and steric limitation of quaternization of poly(4-vinylpyridine) with mesogenic ω-(4′-methoxy-4-biphenylyloxy)alkyl bromides

The kinetics and characteristics of the quaternization of poly(4-vinylpyridine) with very large alkylating agents are studied with the main aim to demonstrate the occurrence of a limitation of the reaction due to steric effect. Kinetics are carried out in sulfolane at different temperatures with two ω-(4'-methoxy-4-biphenylyloxy)alkyl bromides. An important limitation of the reaction is demonstrated: 30% of the pyridine groups are inaccessible at 333 K, 23% at 355.5 K, and 4% at 363 K. Post-quaternization experiments with butyl bromide of already partially quaternized P4VP also demonstrate this limitation. The occurrence of global steric hindrance and hydrophobic effects affecting the conformation of the chain in solution is proposed to explain the limited accessibility of the pyridine groups. The results question the classical neighboring group model generally used to describe the slowing down of the quaternization reaction with increasing quaternization ratio. The thermal stability of the quaternized polymers and the colors of the reaction medium are also discussed. © 1992 John Wiley & Sons, Inc.     

Na_4-CyDTA空间位阻的动态核磁共振研究

用动态核磁共振(DNMR)的方法研究了Na4CyDTA乙羧基质子1H NMR谱随温度的变化关系,结果表明,常温下由于乙羧基旋转受到空间阻碍导致其1H NMR谱分裂为1组AB谱,随温度升高,AB谱的化学位移差减小.通过拟和化学位移差与温度的关系,计算出了Na4CyDTA中阻碍乙羧基旋转的能垒为16.95 kJ/mol.     

Thermogravimetric analysis of poly(alkyl methacrylates) and poly(methylmethacrylate-g-dimethyl siloxane) graft copolymers

The thermal stabilities of various poly(alkyl methacrylate) homopolymers and poly(methyl methacrylate-g-dimethyl siloxane) (PMMA-g-PSX) graft copolymers have been determined by thermogravimetric analysis (TGA). As expected, the thermal stabilities of poly(alkyl methacrylates) were a function of the ester alkyl group, and polymerization mechanism. In particular, thermally labile linkages, which result from termination during free radical or nonliving polymerization mechanisms, decrease the ultimate thermal stabilities of the polymers. However, graft copolymers, which were prepared by the macromonomer technique with free radical initiators, exhibited enhanced thermal stability compared to homopolymer controls. A more complex free radical polymerization mechanism for the macromonomer modified polymerization may account for this result. © 1994 John Wiley & Sons, Inc.     

A benign initiating system for cationic polymerization of isobutyl vinyl ether: Silver salt/aryl(alkyl) halide/lewis base

Aryl(alkyl) halides and silver salts were studied as environmentally benign initiating systems for cationic polymerization of isobutyl vinyl ether (IBVE). The reactivity of the benzyl cations could be effectively controlled by using dimethyl sulfide (Me₂S) as an additive, which was shown to be an effective Lewis base (LB), and diethyl ether as a reaction solvent. Detailed study of various benzyl cations and the order of addition of the reagents revealed that the reaction was controlled by the electronic and steric features of aryl(alkyl) halides, LBs, and IBVE, and a plausible reaction mechanism was presented. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2050–2058     

Electrochemical synthesis of poly(3‐methylthiophene): A kinetic study

Poly(3‐methylthiophene) (P3MT) films were electrogenerated on both platinum and carbon‐felt working electrodes. The kinetic equation was determined by the monomer and electrolyte concentrations being changed for different reaction times. For each sample, the weight of the polymer obtained was measured along with the polymerization charge, the oxidation charge, the ratio (R) between the two magnitudes, the charge storage efficiency (SE), and the doping level. The results obtained from the kinetic study indicate significant electrolyte participation in the electropolymerization process. The SE and the doping level decreased inversely proportionately to both the reaction time and the concentrations of the monomer and electrolyte. The ratio R increased with reaction time as well as with monomer or electrolyte concentrations for all P3MTs generated on the carbon‐felt electrodes, whereas for those films generated on platinum electrodes, the highest values were obtained for the lowest monomer and electrolyte concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1258–1266, 2000     

Overcoming steric effects in the coupling reaction of alkyloxycarbonyloxymethyl (AOCOM) halides with phenols: an efficient synthesis of AOCOM phenolic prodrugs

Steric hindrance is a key factor in the coupling reaction of AOCOM halides with phenols. Sterically unhindered alkoxy groups favor the formation of acylated phenol. Under phase-transfer conditions, alkylated phenol is favored regardless of steric hindrance.     

聚甲基丙烯酸乙酯的合成与性能研究

通过阴离子聚合反应合成了窄分子量分布(D=1．05-1．2)聚甲基丙烯酸乙酯CPEMA）。运用IR谱、^1HNMR和GPC等手段对合成产物进行了表征,探讨了影响甲基丙烯酸乙酯(EMA)阴离子聚合反应的因素,测定了该聚合物的玻璃化温度Tg,并研究了聚甲基丙烯酸乙酯在不同pH溶液中的降解性能。     

Antimicrobial activities of polymeric quaternary ammonium salts from poly(glycidyl methacrylate)s

Amino poly(glycerol methacrylate)s (PGOHMAs) were synthesized from linear and 8‐arm poly(glycidyl methacrylate)s (PGMAs) via ring opening reactions with methylethylamine (MEA), diethylamine, and dipropylamine, respectively, which were further modified by quaternization reaction using methyl iodide to obtain quaternized PGMAs (QPGMAs for short). The products were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, gel permeation chromatography, and thermogravimetric analysis. The amination percentage of amino PGOHMAs and the degree of quaternization of QPGMAs were calculated by elemental analysis and X‐ray photoelectron spectroscopy, respectively. According to the solubility test results, 8‐arm PGOHMA modified with MEA (S8‐MEA) is the only water‐soluble derivative of amino PGOHMAs and was employed as a positive control for the comparison with QPGMAs. Antimicrobial studies on these PGMA derivatives were carried out by testing the minimum inhibitory concentration and the bacteria inhibitive rate against Escherichia coli and Staphylococcus aureus. The results indicated that QPGMAs possessed higher antimicrobial activity than S8‐MEA and exhibited increased antimicrobial activity against both bacteria with an increased degree of quaternization in weak basic conditions. Moreover, the chemical structure of PGMA derivatives and pH value of the assay conditions were found to affect the antimicrobial activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Radiation effects on the thermal degradation of poly(vinyl chloride) and poly(vinyl alcohol)

Radiation effects on the formation of conjugated double bonds in the thermal degradation of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVA) were investigated. Thin films of PVC and PVA were either irradiated with γ-rays at ambient temperature (pre-irradiation) and then subjected to thermal treatment, or irradiated at elevated temperatures (in situ irradiation). An extensive enhancement of the thermal degradation was observed for the pre-irradiation of the PVC films, which was more effective than the effect of the in situ irradiation at the same absorption dose. For the PVA degradation, however, the effect of the in situ irradiation was larger than that of the pre-irradiation. The results were explained and related mechanisms were discussed based on radiation-induced chemical reactions and their individual contributions to the thermal degradation behaviors of the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3089–3095, 1998     

Novel poly(aryl ether phthalazinium) ionomers and their properties

The synthesis of N-phenyl phthalazinium salts by condensation of a 1,2-diaroylbenzene with phenylhydrazine is described. This reaction was utilized to prepare novel poly(aryl ether phthalazinium) ionomers by the direct condensation of poly(aryl ether ketone)s with phenylhydrazine. The preparation of poly(aryl ether phthalazinium) ionomers by methylation of poly(aryl ether phthalazine)s is also described. Most of the ionomers are amorphous, thermally stable, and soluble in organic solvents. They can be cast into flexible and strong films. The glass transition temperature of the ionomers ranges from 297 to 363°C, an increase of 12 to 100°C over the corresponding neutral polymers. © 1996 John Wiley & Sons, Inc.     

Interval kinetic gravimetric sorption of acetone in random copolymers of poly(ethylene terephthalate) and poly(ethylene 2,6-naphthalate)

Interval sorption kinetics of acetone in solvent cast films of random poly(ethylene terephthalate)-co-(ethylene 2,6-naphthalate) (PET-co-PEN) are reported at 35°C and at acetone pressures ranging from 0 to 7.3 cm Hg. Polymer composition is varied systematically from 0% to 50% poly(ethylene 2,6-naphthalate). Equilibrium sorption is well described by the dual-mode sorption model. Interval sorption kinetics are described using a two-stage model that incorporates both Fickian diffusion and protracted polymer structural relaxation. The incorporation of low levels of PEN into PET significantly reduces the excess free volume associated with the glassy state and, for these interval acetone sorption experiments in ∼ 5 μm-thick films, decreases the fraction of acetone uptake controlled by penetrant-induced polymer structural relaxation. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2973–2984, 1999     

改性聚氯乙烯絮凝剂的合成及其性能的研究

采用乙醇胺为亲核试剂对聚氯乙烯进行改性,控制胺化反应条件可以得到不同氮含量的产物.确定了最佳反应条件：温度80℃,PVC结构单元与乙醇胺的摩尔比1/1,反应时间小于36h,反应压力2.8MPa;用红外光谱表征了产物的结构、用元素分析测定了产物中N、H、C、Cl的含量;以ω=0.03的硅藻土水悬浮液模拟污水,考察了产物的絮凝性能.     

Thermal dehydrochlorination of poly(vinylidene chloride)

The kinetics of the early stages of thermal degradation below 1% dehydrochlorination of emulsion-polymerized poly(vinylidene chloride) (PVDC) is studied by the variation of the pH value of potassium hydroxide aqueous solution between 160 and 190°C in the presence of air and other gas streams. The results turned out that the thermal degradation of PVDC can be divided into three stages, which correspond to an induction period, a period with conversion below 0.1% dehydrochlorination, and that with conversion ranging from 0.1 to 1%. For the induction stage, the induction time depends upon the types of environment gas and degradation temperature. Both of the second and the third stages are zero-order reactions, which also result in the discoloration and crosslinking of the neat polymer. The average apparent activational energy of the zero-order degradation reaction was about 21 kcal/mol, which is independent of the types of environment gas. The whole degrading kinetics data can be well explained by the mechanism of a free-radical-induced dehydrochlorination. The viscosity of the degraded sample increases rapidly with degradation and becomes insoluble in regular solvents. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2035–2044, 1999     

Isothermal and nonisothermal crystallization kinetics of poly(propylene terephthalate)

The kinetics of crystallization of poly(propylene terephthalate) (PPT) samples of different molecular weights were studied under both isothermal and nonisothermal conditions. The Avrami and Lauritzen–Hoffmann treatments were applied to evaluate kinetic parameters of PPT isothermal crystallization. It was found that crystallization is faster for low‐molecular‐weight samples. The modified Avrami equation, and the combined Avrami–Ozawa method were found to successfully describe the nonisothermal crystallization process. Also, the analysis of Lauritzen–Hoffmmann was tested and it resulted in values close to those obtained with isothermal crystallization data. The nonisothermal kinetic data were corrected for the effect of the temperature lag and shifted alone with the isothermal kinetic data to obtain a single master curve, according to the method of Chan and Isayev, testifying to the consistency between the isothermal and corrected nonisothermal data. A new method for ranking of polymers, referring to the crystallization rates, was also introduced. This involved a new index that combines the maximum crystallization rate observed during cooling with the average crystallization rates over the temperature range of the crystallization peak. Furthermore, the effective energy barrier of the dynamic process was evaluated with the isoconversional methods of Flynn and Friedmann. It was found that the energy barrier is lower for the low‐molecular‐weight PPT. The effect of the catalyst remnants on the crystallization kinetics was also investigated and it was found that this is significant only for low‐molecular‐weight samples. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3775–3796, 2004     

位阻效应对N-(4-脱氢苯基)吡啶离子与氮氧自由基反应的理论计算研究

应用量子化学密度泛函理论(DFT),在B3LYP/cc-pVDZ基组水平上,对N-(4-脱氢苯基)吡啶离子与不同结构的氮氧自由基反应进行了热动力学研究.优化了反应通道上反应物、中间体、过渡态和产物的几何构型并计算出它们的零点振动能( Ezpv)和焓值,分析数据研究位阻效应对反应的影响.研究表明3类氮氧自由基均与N-(4...     

Photochemical behavior of poly(ethylacryloylacetate) and poly(acryloylacetone) films

Films of poly(ethylacryloylacetate) (PEAA) and poly(acryloylacetone) (PAA) were subjected to UV irradiation (λ = 254 nm) at room temperature. The photoinduced structure transfer from cis-enol onto a diketo forms has been investigated. The structure transfer caused by UV light was found to be slower than for the corresponding process in solution. The spectral investigations (UV, IR) showed reversible process of photoketonization. The results were analyzed in terms of the model for the participation of the trans-enol form in the process of the ketonization. Based on the results obtained, some general conclusions were made about the organization of the units in the polymer chain. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3683–3688, 1997     

弹性体偶联剂结构对PVC/PPC性能的影响

NBR－PPC弹性体偶联剂能促进PPC（聚丙撑碳酸酯）与PVC（聚氯乙烯）之间的相容性，改善共混物的力学性能，并在共混体系中产生轻度交联。偶联剂组成在NBR／PPC比例为70／30，NBR（丁腈橡胶）含腈量为34％，BPO过氧化苯甲酸用量为2．5份时，共混物的综合力学性能最佳，但偶联剂预先硫化时间不宜过长．     

Thermal degradation of poly(ethyl methacrylate) and its copolymer with poly(ethyl acrylate)

The thermal degradation behaviour of poly(ethyl methacrylate) homopolymers and poly(ethyl methacrylate) and poly(ethyl acrylate) copolymers synthesized by using the benzoyl peroxide-di-methyl aniline redox pair at different temperatures (18–35C) was investigated. Contrary to some reports in the literature, the thermal degradation of PEMA was observed to take place in multi steps. These are assigned to be loss of labile end groups, side chain scission, anhydride formation and main chain degradation steps. Dominating chemical formations at the end of these steps were characterized by FTIR spectroscopy.The homopolymer samples synthesized at 18C showed a greater thermal stability against degradation. Copolymerization with small amounts of ethyl acrylate was observed to impart thermal stability to PEMA by stabilizing mainly the end groups against degradations.     

Thermodynamic and kinetic thermal analyses on dual crystal forms in polymorphic poly(heptamethylene terephthalate)

Thermal analyses were performed for determining the equilibrium melting temperatures T of the respective α‐ and β‐crystal in melt‐crystallized polymorphic poly(heptamethylene terephthalate) (PHepT) using both linear and nonlinear Hoffman‐Weeks (H‐W) methods for comparison of validity. These two crystals in PHepT do not differ much in their melting temperatures. The equilibrium melting temperatures of the α‐ and β‐crystal as determined by the linear H‐W method are 98 °C and 100.1 °C, respectively; but the nonlinear H‐W method yielded higher values for both crystals. The equilibrium melting temperatures of the α‐ and β‐crystal according to the nonlinear H‐W method are 121 °C and 122.5 °C, respectively. Both methods consistently indicate that T of the β‐crystal is only slightly higher than that of the α‐crystal. Such small difference in T between the α‐ and the β‐crystal causes difficulties in judging the relative thermodynamic stability of these two crystals. Thus, kinetics of these two crystals was compared using the Avrami and Ozawa theory. The crystallization produced by quenching from T_max = 110 °C and 150 °C shows a heterogeneous and homogeneous nucleation mechanism, respectively. The lower T_max = 110 °C leads to heterogeneous nucleation and only α‐crystal in PHepT, whose crystallization rates at same T_c are much higher than crystallization rates by quenching from T_max = 150 °C leading to either α‐ or β‐crystal with homogeneous nucleation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1839–1851, 2009     

Accessibility of the gel phase in macroporous network polymers: A comparison of the fluorescence probe and inverse steric exclusion chromatography techniques

Two independent methods of analysis were employed to evaluate accessibility of the gel phase in macroporous network polymers. Fluorescence probes, covalented incorporated into the gel during polymerization, can provide a qualitative assessment of accessible surface area from an analysis of the solvatochromic shift of fluorescence emission. These findings are corroborated by inverse steric exclusion chromatography (ISEC). The data permits quantification of the polymers surface character in the solvated state. The results call attention to the inadequacy of dry surface area technique (e.g., BET analysis) in providing information of this type.