Novel polycationic biocides: Synthesis and antibacterial activity of polymeric phosphonium salts

Various polymeric phosphonium salts and the corresponding low-molecular-weight model compounds were prepared and their antibacterial activities against Staphylococcus aureus and Escherichia coli were explored by the viable cell counting method in sterile distilled water. Antibacterial activity of the polymers was found to be higher than that of the corresponding model compounds, particularly against S. aureus. Furthermore, the polymeric phosphonium salt exhibited a higher activity by 2 orders of magnitude than the polymeric quaternary ammonium salt with the same structure except the cationic part. Compounds with the longest alkyl chain (octyl) studied were found to exhibit particularly high activity, and this finding may be ascribed to the contribution of the increased hydrophobicity of the compounds to the cidal activity. © 1993 John Wiley & Sons, Inc.     

Polymeric phosphonium salts as a novel class of cationic biocides. II. Effects of counter anion and molecular weight on antibacterial activity of polymeric phosphonium salts

Various poly[tributyl(4-vinylbenzyl)phosphonium salt]s with different counter anions were prepared and their antibacterial activities against Staphylococcus aureus were explored by the viable cell counting method in sterile distilled water. Antibacterial activity was found to be affected by the structure of the counter anions. The activity was low for a counter anion which tends to form a tight ion-pair with phosphonium ion, while it was high for those facilitating ionic dissociation to free ions. Furthermore, the molecular weight dependence of the antibacterial activity was investigated for poly[tributyl(4-vinylbenzyl) phosphonium chloride] with various molecular weights against S. aureus. Antibacterial activity was found to increase with molecular weight. Various copolymers were prepared in which the compositional ratio of tributyl(4-vinylbenzyl)phosphonium chloride to acrylamide, N-vinyl-2-pyrrolidone, or styrene was altered, and the effect of the positive charge density on the antibacterial activity was investigated against S. aureus. Antibacterial activity of the copolymers was much higher than that of the low-molecular-weight model compound and enhanced with the molar fraction of the phosphonium units in the copolymers. © 1993 John Wiley & Sons, Inc.     

Polymeric phosphonium salts as a novel class of cationic biocides. IV. Synthesis and antibacterial activity of polymers with phosphonium salts in the main chain

Polymers with phosphonium salts and different alkyl spacers in the main chain were prepared, and their antibacterial activities against Staphylococcus aureus and Escherichia coli were explored by the viable cell counting method in sterile distilled water. The antibacterial activity of the polymers was found to be higher than that of the corresponding model compounds against each strain, and the effect of the molecular weight on the antibacterial activity was also observed for the compounds with the same spacer length. The antibacterial activity of the polymer samples bonded with different spacer lengths was found to increase with increasing the spacer length against both strains. © 1993 John Wiley & Sons, Inc.     

Polymeric phosphonium salts as a novel class of cationic biocides. III. Immobilization of phosphonium salts by surface photografting and antibacterial activity of the surface-treated polymer films

Immobilized polycationic biocides with phosphonium salt on the surface of poly(propylene) film were prepared by surface photografting and surface antibacterial activity of the resulting films against Staphylococcus aureus and Escherichia coli was explored by the viable cell counting method. These films with phosphonium salts were found to exhibit high antibacterial activity against S. aureus and E. coli—particularly against E. coli. Furthermore, morphological changes of the cells of S. aureus and E. coli in contact with the immobilized phosphonium salt were estimated by scanning electron microscopy. It was found that the immobilized biocides exhibited surface bactericidal activity against both strains as evidenced by shrunken and deformed cells of these species in contact with the immobilized biocides. © 1993 John Wiley & Sons, Inc.     

Photocationic and radical polymerizations of epoxides and acrylates by novel sulfonium salts

Novel sulfonium salts [methyl‐, 2‐indany‐, or 1‐ethoxycarbonylethyl methyl‐2‐naphthylsulfonium hexafluorophosphate and 2‐indany‐, 1‐ethoxycarbonylethyl‐, 2‐methyl‐2‐phenylpropyl‐, 2‐phenylpropyl‐, 2‐phenylethyl‐, 2‐(4‐methoxyphenyl)‐ethyl‐, or 3‐(4‐methoxyphenyl)‐2‐propyl methylphenylsulfonium hexafluorophosphates] were synthesized by the reaction of dimethylsulfate and the corresponding sulfides followed by anion exchange with KPF₆. These sulfonium salts could polymerize epoxy monomers at lower temperatures than previously reported for benzylsulfonium salt initiators. In particular, sulfonium salts with naphthyl groups showed higher photoactivity than already reported for di(4‐tert‐butylphenyl)iodonium and triphenylsulfonium hexafluorophosphates. These sulfonium salts showed higher activity in photoradical polymerization and photocationic polymerization. The photopolymerization was accelerated by the addition of 4‐methoxy‐1‐naphthol, N‐ethylcarbazole, 2,4‐dimethylthioxanthone, phenothiazine, and 2‐ethyl‐9,10‐dimethoxyanthracene as photosensitizers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3816–3827, 2003     

Polymeric phosphonium salts as a novel class of cationic biocides. IX. Effect of side-chain length between main chain and active group on antibacterial activity

Polymeric phosphonium salts with different side-chain length between the main chain and the active group, poly[4-2-tributyl-phosphonioethyl)styrene chloride-co-4-(2-chloroethyl)styrene] and poly[4-(3-tributylphosphoniopropyl)styrene chloride-co-4-(3-chloropropyl)styrene], were prepared and their antibacterial activities against Staphylococcus aureus and Escherichia coli were examined by the viable cell counting method in sterile distilled water. The antibacterial activity was found to decrease as the side-chain length increased. The most significant finding is a peculiar concentration dependence of the antibacterial activity, which demonstrated the presence of an optimal concentration. The observed specific effects of the side chain length and the concentration on the antibacterial activity seem to be ascribed to the state of aggregation of the polycationic biocides in aqueous solution. © 1994 John Wiley & Sons, Inc.     

Photoinitiated polymerization of aryl cyclic sulfonium salts

Polymers are produced by direct photolysis of substituted aryl cyclic sulfonium Zwitterionic salts in solution or film. Analysis of zwitterionic monomers via ¹³C NMR, UV, and IR spectroscopy as well as X‐ray diffraction clearly identifies the structures taking part in the photoinduced polymerization in the solid crystalline films. The protonated form of the zwitterionic monomers, however, fails to produce detectable amounts of polymer upon photolysis under any conditions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 571–584, 2001     

Synthesis and activity of aryl benzyl methyl sulfonium salts as cationic initiators: Effect of substituent on aryl group

Benzyl o-, m-, and p-substituted phenyl methyl sulfonium salts ( 2b – 2g ) were synthesized and their activities as cationic initiators were evaluated in the bulk polymerization of phenyl glycidyl ether (PGE). Especially, their activities were estimated with respect to the effect of substituents on the aryl groups. In the polymerizations of PGE with a series of benzyl p-substituted phenyl methyl sulfonium salts, the order of their activities was found to be 2c (CH₃OCOO) > 2b (CH₃COO) > 2d (CH₃O) ～ 2a (HO). In particular, 2c was the most active initiator of all, capable of initiating the polymerization of PGE even at room temperature. In the polymerizations with 2a, 2e (m-Cl), 2f (o-CH₃), and 2g (m-CH₃), the activity of 2e was the highest of all while those of 2a, 2f , and 2g were almost the same. These results strongly suggested that the electron-withdrawing group placed on the aryl group undoubtedly enhanced the activity of the sulfonium salts as the cationic initiators.     

Preparation and properties of antibacterial ABS plastics based on polymeric quaternary phosphonium salts antibacterial agents

Antibacterial acrylonitrile‐butadiene‐styrene (ABS) plastics were prepared by adding polymeric quaternary phosphonium salts as antibacterial agents through a double screw extruder. The novel polymeric quaternary phosphonium salts (PBrMAP‐n) with alkyl chain length ranging from 3 to 11 were synthesized, and their chemical structures were confirmed by Nuclear magnetic resonance hydrogen spectroscopy (¹H‐NMR) and Fourier transform infrared spectroscopy (FT‐IR) spectra. The thermogravimetric analysis (TGA) results showed that all of the antibacterial agents had good thermal stability. The influence of addition amount as well as the alkyl chain length on mechanical properties and antibacterial properties was investigated. Compared with the pure ABS, all of PBrMAP‐n containing specimens had comparable tensile strength and flexural properties but reduced impact strength. Only samples with 10 wt% of PBrMAP‐11 exhibited more than 90% antibacterial efficiency against Escherichia coli and Staphylococcus aureus.     

Photocrosslinking of copolymers of vinyloxyethyl methacrylate-styrene initiated by sulfonium salts. II. Photocrosslinking behaviors

Vinylether was used as a cationically polymerizable moiety and incorporated into sidechain of polymers as copolymers of vinyloxyethyl methacrylate (VEM) and styrene (St). Photoirradiation of the copolymers containing a small amount of benzyl(4-hydroxyphenyl) methylsulfonium salt (BSS) resulted in a high crosslinking density as evidenced by a low degree of swelling, which is ascribed to the high reactivity of the vinyloxy moieties. The sensitivity of this photoreaction is significantly high because of a large kinetic chain length of the cationic polymerization of vinylethers, while copolymers of glycidyl methacrylate and St showed crosslinking to much less extent when irradiated under the same condition. The ability of other sulfonium salts, (4-hydroxyphenyl) methyl(4-nitrobenzyl) sulfonium salt and (4-hydroxyphenyl) methyl(1-naphthylmethyl)sulfonium salt, to induce photocrosslinking was also examined. © 1992 John Wiley & Sons, Inc.     

Crystal structure of the sulfonium salts of natural azulenes

The molecular and crystal structure of dimethyl-(1,4-dimethyl-7-ethylazulyl)-sulfonium perchlorate and dimethyl-(1,4-dimethyl-7-isopropylazulyl)-sulfonium perchlorate was determined by X-ray diffraction analysis. Their crystal structure is mainly determined by C-H...π intermolecular interactions.     

Promotion of the photoacid generation performance of sulfonium salts by inhibiting the isomerization of conjugated systems using a cyclization strategy

This work describes an original structure−reactivity relationship within a series of sulfonium salts synthesized using a cyclization strategy. The new sulfonium salt comprises a stilbene subunit decorated with a combination of cyclized structure, that is, carbocyclic ring, furan ring, and thiophene ring, to inhibit the isomerization of double bond systems. The photoacid generation efficiency of such cyclized stilbene derivative sulfonium salts is mainly modulated by the five-membered ring structures and the substituent as confirmed by photodegradation, in situ nuclear magnetic resonance, and cyclic voltammetry. Such cyclization drastically regulates the population of highly reactive excited singlet species and thus enhances the photoacid generation performance of the sulfonium salts by more than one order of magnitude within the series, especially when introducing oxygen to form the benzofuran ring structure. Given this amplified photoreactivity, the application potential of the photoinitiated cationic polymerization of the sulfonium salts was evaluated at different irradiation wavelengths.     

Effects of C3-aromatic heterocycles on 1,3,5-triaryl-2-pyrazoline sulfonium salt photoacid generators as light-emitting diode-sensitive cationic photoinitiators

Four 1,5-diphenyl-3-aromatic heterocyclyl-2-pyrazoline-based sulfonium salt photoacid generators (PAGs) with different aromatic heterocycles substituted on C3 atom and dimethyl sulfonium group on C5 atom were synthesized. These PAGs were highly photosensitive in the 365–425 nm light-emitting diode region, and the intramolecular charge transfer from the pyrazoline ring to sulfonium salts induced efficient photolysis and high Φ_H⁺. The heterocycles as well as their substituted positions significantly influenced the energy of the S₂ orbital, which was determined by the electrochemical and absorption properties of the PAGs. The raising of the S₂ orbital energy enlarged the energy gap of S₀–S₂ and S₁–S₂, resulting in blue shift of the absorption spectra and increase in the quantum yield of photoacid generation (Φ_H⁺), respectively. When the energy of excited electrons was higher than that of the S₂ orbital, the transition from S₀ to S₂ (π–π*) occurred before the C-S cleavage on S₁ and the PAGs showed high Φ_H⁺ values (0.52–0.72). The transition from S₀ to S₁ (π–σ*) occurred when the energy of electrons is lower than that of the S₂ orbital, and the PAGs showed low Φ_H⁺ value. The photopolymerization kinetics demonstrated that these PAGs were highly efficient cationic photoinitiators.     

Diphenylphenacyl sulfonium salt as dual photoinitiator for free radical and cationic polymerizations

Diphenylphenacylsulfonium tetrafluoroborate (DPPS⁺BF^4–) salt possessing both phenacyl and sulfonium structural units was synthesized and characterized. DPPS⁺BF^4– absorbs light at relatively higher wavelengths. The direct and sensitized initiation activity of the salt in both cationic and free radical photopolymerizations was investigated and compared with that of its analogue triphenylsulfonium tetrafluoroborate (TPS⁺BF^4–). Differential scanning photocalorimetry and conventional gravimetric studies revealed that DPPS⁺BF^4– showed higher efficiency for direct and sensitized photopolymerizations of most of the monomers investigated. Although, principally both homolytic and/or heterolytic cleavage is possible, theoretical studies suggested that homolytic pathway is more favored for the generation of reactive initiating species. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 451–457     

阳离子型UV光引发剂--三芳基硫鎓盐的合成

以硝基苯、浓硫酸、六氟磷酸钾和碘酸钾为原料,经氧化、取代、置换反应得到3,3′-二硝基二苯基碘六氟磷酸盐(2)。2与苯硫醚在苯甲酸铜的催化下合成了3-硝基苯基二苯基硫六氟磷酸盐(3)。3是一种新型的三芳基硫鎓盐阳离子UV光引发剂,其结构经UV,1H NMR,IR及MS确证。     

Cationic polymerization with p-substituted benzyl p-hydroxyphenyl methyl sulfonium salts: Effect of substituents and mechanistic aspects of initiation reaction

Various p-substituted benzyl p-hydroxyphenyl methyl sulfonium salts ( 2 ) were synthesized and their initiator activities were evaluated in bulk polymerization of glycidyl phenyl ether (PGE). The order of the activity was found to be 2b (X = CH₃) > 2a (X = H) ≈ 2c (X = Cl) > 2d (X = NO₂), indicating that the introduction of an electron-donating group enhanced the activity. In Hammett's plots, the logarithm of the ratio of the polymerization rates (log k_x/k_H) was correlated with σ⁺_ρ better than with σ_p and a negative ρ⁺ value (-1.18) was obtained. Reaction of 2a with benzyl mercaptan mainly gave dibenzyl sulfide and p-hydroxyphenyl methyl sulfide. The obtained results seemed to demonstrate that the OH group of the aryl group yielded no proton as initiator for the polymerization, whereas the benzyl group caused the polymerization, which was initiated by the corresponding benzyl cation formed by C? S bond cleavage. © 1993 John Wiley & Sons, Inc.