Determination of reactivity ratios for ethylene/α-olefin copolymerization catalysed by the C2H4[Ind]2ZrCl2/methylaluminoxane system

The present study reports values of reactivity ratios for ethylene/1-hexene, ethylene/1-octene and ethylene/1-decene copolymerizations promoted by C₂H₄[Ind]₂ZrCl₂/MAO. The comonomer reactivities are markedly influenced by the number of carbon atoms of the α-olefin. The ethylene/1-decene copolymerization depends on the concentration of α-olefin in the feed.     

Shape and diffusion of the monomer‐controlled copolymerization of ethylene and α‐olefins over Cp2ZrCl2 confined in the nanospace of the supercage of NaY

Cp₂ZrCl₂ confined inside the supercage of NaY zeolites [NaY/methylaluminoxane (MAO)/Cp₂ZrCl₂] exhibited the shape and diffusion of a monomer‐controlled copolymerization mechanism that strongly depended on the molecular structure of the monomer and its size. For the ethylene–propylene copolymerization, NaY/MAO/Cp₂ZrCl₂ showed the effect of the comonomer on the increase in the polymerization rate in the presence of propylene, whereas the ethylene/1‐hexene copolymerization showed little comonomer effect, and the ethylene/1‐octene copolymerization instead showed a comonomer depression effect on the polymerization rate. Isobutylene, having a larger kinetic diameter, had little influence on the copolymerization behaviors with NaY/MAO/Cp₂ZrCl₂ for the ethylene–isobutylene copolymerization, which showed evidence of the shape and diffusion of a monomer‐controlled mechanism. The content of the comonomer in the copolymer chain prepared with NaY/MAO/Cp₂ZrCl₂ decreased by about one‐half in comparison with that of Cp₂ZrCl₂. A differential scanning calorimetry study on the melting endotherms after the successive annealing of the copolymers showed that the copolymers of NaY/MAO/Cp₂ZrCl₂ had narrow comonomer distributions, whereas those of homogeneous Cp₂ZrCl₂ were broad. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2171–2179, 2003     

Generation of active site confined inside supercage of NaY zeolite on a nano-scale and its ethylene polymerization

To generate an active site that consisted of one Cp₂ZrCl₂ molecule and 1-2 MAO molecules inside supercage of NaY zeolite, two preparation ways for supported catalyst were estimated. First, higher concentration of MAO and Cp₂ZrCl₂, and long reaction time were introduced during the preparation of supported catalyst. It showed activity in ethylene polymerization without any additional MAO. It indicates that Cp₂ZrCl₂ coordinated with only 1-2 MAO molecules could be an active site due to the fact that supercage has nano-scaled diameter of supercage, 1.2 nm, and it could contain only 1-2 MAO molecules inside it theoretically. In situ generation of active site between NaY/MAO and homogeneous Cp₂ZrCl₂ also showed experimental evidence that an active site was generated inside the supercage of NaY zeolite. It showed low activity with long activation time, suggesting the presence of a diffusion effect of Cp₂ZrCl₂ in the pore of NaY. However, NaY/Cp₂ZrCl₂ and homogeneous MAO system showed the characteristic PE polymerization with homogeneous catalyst, indicating that active site was not generated inside the supercage of NaY.     

Copolymerization of ethylene with 1‐hexene over metallocene catalyst supported on complex of magnesium chloride with tetrahydrofuran

The study of ethylene/1‐hexene copolymerization with the zirconocene catalyst, bis(cyclopentadienyl)zirconium dichloride (Cp₂ZrCl₂)/methylaluminoxane (MAO), anchored on a MgCl₂(THF)₂ support was carried out. The influence of 1‐hexene concentration in the feed on catalyst productivity and comonomer reactivity as well as other properties was investigated. Additionally, the effect of support modification by the organoaluminum compounds [(MAO, trimethlaluminum (AlMe₃), or diethylaluminum chloride (Et₂AlCl)] on the behavior of the MgCl₂(THF)₂/Cp₂ZrCl₂/MAO catalyst in the copolymerization process and on the properties of the copolymers was explored. Immobilization of the Cp₂ZrCl₂ compound on the complex magnesium support MgCl₂(THF)₂ resulted in an effective system for the copolymerization of ethylene with 1‐hexene. The modification of the support as well as the kind of organoaluminum compound used as a modifier influenced the activity of the examined catalyst system. Additionally, the profitable influence of immobilization of the homogeneous catalyst as well as modification of the support applied on the molecular weight and molecular weight distribution of the copolymers was established. Finally, with the successive self‐nucleation/annealing procedure, the copolymers obtained over both homogeneous and heterogeneous metallocene catalysts were heterogeneous with respect to their chemical composition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2512–2519, 2004     

Copolymerization of ethylene and 1-butene using a Cr—silica catalyst in a slurry reactor

A novel slurry reactor was used to investigate the copolymerization behavior of ethylene and 1-butene in the presence of 1 wt % Cr on Davison silica (Phillips-type) catalyst over the temperature range of 0–50°C, space velocity of about 0.0051 [m³ (STP)]/(g of catalyst) h, and a fixed ethylene to 1-butene feed mole ratio of 95 : 5. The effect of varying the ethylene to 1-butene feed ratios, 100 : 0, 96.5 : 3.5, 95 : 5, 93 : 7, 90 : 10, 80 : 20, and 0 : 100 mol/mol at 50°C was also studied. The addition of 1-butene to ethylene typically increased both copolymerization rates and yields relative to ethylene homopolymerization with the same catalyst, reaching a maximum yield for an ethylene: 1-butene feed ratio of 95 : 5 at 50°C. The incorporation of 1-butene within the copolymer in all cases was less than 5 mol %. The average activation energy for the apparent reaction rate constant, k_a, based on total comonomer mole fraction in the slurry liquid for the ethylene to 1-butene feed mole ratio of 95 : 5 in the temperature range of 50–30°C measured 54.2 kJ/mol. The behavior for temperatures between 30 to 0°C differed with an activation energy of 98.2 kJ/mol; thus, some diffusion limitation likely influences the copolymerization rates at temperatures above 30°C. A kinetics analysis of the experimental data at 50°C for different ethylene to 1-butene feed ratios gave the values of the reactivity ratios, r₁ = 27.3 ± 3.6 and r₂ ≅ 0, for ethylene and 1-butene, respectively. © 1996 John Wiley & Sons, Inc.     

COPOLYMERIZATION OF ETHYLENE AND PROPYLENE WITH CpCH2CH2CH=CH2)2MCl2(M=Zr,Hf)AND Cp2ZrCl2 CATALYSTS

(CpCH_2CH_2CH = CH_2)_2MCl_2(M=Zr, Hf)/MAO and Cp_2ZrCl_2/MAO (Cp=cyclopentadienyl; MAO=methylaluminoxane) catalyst systems have been compared for ethylene copolymerization to investigate the influence of theligand and transition metal on the polymerization activity and copolymer properties. For both CH_2CH_2CH=CH_2 substitutedcatalysts the catalytic activity decreased with increasing propene concentration in the feed. The activity of the hafnocenecatalyst was 6～8 times lower than that of the analogous zirconocene catalyst, ~(13)C NMR analysis showed that the copolymerobtained using the unsubstituted catalyst Cp_2ZrCl_2 has greater incorporatien of propene than those produced byCH_2CH_2CH=CH_2 substituted Zr and Hf catalysts. The melting point, crystallinity and the viscosity-average molecularweight of the copolymer decreased with an increase of propenc concentration in the feed. Both CH_2CH_2CH= CH_2 substitutedZr and Hf catalysts exhibit little or no difference in the melting point and crystallinity of the produced copolymers. However,there are significant differences between the two zirconocene catalysts. The copolymer produced by Cp_2ZrCl_2 catalyst havemuch lower T_m and X_c than those obtained with the (CpCH_2CH_2CH=CH_2)_2ZrCl_2 catalyst. The density and molecular weightof the copolymer decreased in the order: (CpCH_2CH_2CH=CH_2)_2HfCl_2>(CpCH_2CH_2CH=CH_2)_2ZrCl_2>Cp_2ZrCl_2. The kineticbehavior of copolymerizaton with Hf catalyst was found to be different from that with Zr catalyst.     

Combined polymerization catalysis of nickel complex and zirconocene for branched polyethylene

The polymerization behavior of 2-(2′-pyridyl) quinoxaline nickel dibromide/Cp₂ZrCl₂/MAO system was investigated in three ways: the Ni catalyst was added first, followed by addition of Zr catalyst (method I); the Ni and Zr catalysts were added simultaneously (method II); and the Zr catalyst was added first, followed by addition of Ni catalyst (method III). Results of GC-MS, GPC,¹³C NMR and DSC investigations indicated that the properties of resulting polyethylene were greatly varied by changing feeding orders of the two catalysts. Decreasing Ni/Zr molar ratio or increasing polymerization temperature gave corresponding polyethylenes with less branches and higher melting point. Compared to the procedure using Cp₂ZrCl₂ catalyst only, the activity of Zr catalyst in those combined system decreased because of the competition of ethylene between the [Ni−C] and [Zr−C] active centers. In addition, other zirconocenes were also employed as copolymerization catalysts in the combined system with nickel complex. compared to Cp₂ZrCl₂ case, the ethyl-bridged Zr catalyst performed better for polymerization of ethylene while the Si-bridged Zr catalyst showed better copolymerization ability.     

A novel zirconocene/ultradispersed diamond black powder supported catalytic system for ethylene polymerization

A novel carrier of ultradispersed diamond black powder (UDDBP) was used to support metallocene catalyst. Al₂O₃ was also used as carrier in order to compare with UDDBP. Supported catalysts for ethylene polymerization were synthesized by two different reaction methods. One way was direct immobilization of the metallocene on the support, the other was adsorption of MAO onto the support followed by addition of the metallocene. Four supported catalysts Cp₂ZrCl₂/UDDBP, Cp₂ZrCl₂/Al₂O₃, Cp₂ZrCl₂/MAO/UDDBP and Cp₂ZrCl₂/Al₂O₃/MAO were obtained. The content of the zirconium in the supported catalyst was determined by UV spectroscopy. The activity of the ethylene polymerization catalyzed by supported catalyst was investigated. The influence of Al/Zr molar ratio and polymerization temperature on the activity was discussed. The polymerization rate was also observed.     

SYNTHESIS AND PROPERTIES OF HOMOPOLYMER AND COPOLYMERS OBTAINED FROM 1-OCTADECENE WITH ZIRCONOCENE CATALYSTS

Studies related to the behavior of different metallocene catalysts for the homopolymerization of 1-octadecene andits copolymerization with ethylene will be presented. The metallocenes: rac-Et(Ind)_2ZrCl_2, rac-Me_2Si(Ind)_2ZrCl_2 andPh_2C(Flu)(Cp)ZrCl_2 were chosen for the homopolymerization study. They show important differences in catalytic activity athigh temperatures (≥70℃), with rac-Et(Ind)_2ZrCl_2 showing the highest activity. At lower temperatures (≤30℃) thedifferences are negligible. For the copolymerization of ethylene with 1-octadecene only the catalysts rac-Et(Ind)_2ZrCl_2 andrac-Me_2Si(Ind)_2ZrCl_2 were studied. The results show that their catalytic activity is just like that for the homopolymerizationof 1-octadecene, with higher activity for the metallocene with the Et-bridged catalyst. ~(13)C-NMR analysis shows that thecomposition of the copolymerization products depends on the catalytic systems. Copolymers obtained with rac-Me_2Si(Ind)_2ZrCl_2 have greater comonomer incorporation. Thermal analysis shows that poly-1-octadecene synthesized withthe catalyst rac-Et(Ind)_2ZrCl_2 is very dependent on the polymerization temperature. The homopolymer obtained at 70℃presents two endothermal peaks at 41℃ and 53℃, as compared with the one obtained at 30℃ which presents one wider peakwith a maximum at 67℃. For the catalyst rac-Me_2Si(Ind)_2ZrCl_2 this trend is not observed. The type of metallocene and thereaction time do not significantly change the intrinsic viscosity, but the polymerization temperature changes it drastically,giving higher values at lower temperature. Viscosity measurements on the copolymers show that an increase of comonomerconcentration in the feed reduces the molecular weight of the copolymer, and it was also found that for homopolymer, themolecular weight is independent of the catalytic systems.     

Copolymerization of propylene with 1-butene and 1-pentene with the isospecific catalytic system rac-Me2Si(4-Ph-2-MeInd)2ZrCl2-MAO

The copolymerization of propylene with 1-butene and 1-pentene at 60°C in the propylene bulk in the presence of the homogeneous isospecific metallocene catalyst of the C₂ symmetry rac-Me₂Si(4-Ph-2-MeInd)₂ZrCl₂ activated by polymethylaluminoxane is studied. Copolymers containing up to 30 mol % 1-butene and up to 10 mol % 1-pentene are synthesized. For the copolymerization of the above monomers, reactivity ratios are estimated to be equal to unity, thereby indicating the azeotropic character of the process. It is found that the distribution of comonomer units in the copolymers is close to statistical. For both comonomers, the comonomer effect is observed: an increase in the rate of propylene polymerization after addition of a small amount of a less reactive comonomer. The addition of 1-butene and 1-pentene to polypropylene shows a weak effect on the stereoregularity of chains but causes a marked reduction in the molecular mass of the polymer and changes its thermophysical characteristics and mechanical properties. An X-ray diffraction study of the copolymers is performed.     

The “comonomer effect” in ethylene/α‐olefin copolymerization using homogeneous and silica‐supported Cp2ZrCl2/MAO catalyst systems: Some insights from the kinetics of polymerization,active center studies,and polymerization temperature

Homogeneous and silica‐supported Cp₂ZrCl₂/methylaluminoxane (MAO) catalyst systems have been used for the copolymerization of ethylene with 1‐butene, 1‐hexene, 4‐methylpentene‐1 (4‐MP‐1), and 1‐octene in order to compare the “comonomer effect” obtained with a homogeneous metallocene‐based catalyst system with that obtained using a heterogenized form of the same metallocene‐based catalyst system. The results obtained indicated that at 70 °C there was general rate depression with the homogeneous catalyst system whereas rate enhancement occurred in all copolymerizations carried out with the silica‐supported catalyst system. Rate enhancement was observed for both the homogeneous and the silica‐supported catalyst systems when ethylene/4‐MP‐1 copolymerization was carried out at 50 °C. Active center studies during ethylene/4‐MP‐1 copolymerization indicated that the rate depression during copolymerization using the homogeneous catalyst system at 70 °C was due to a reduction in the active center concentration. However, the increase in polymerization rate when the silica‐supported catalyst system was used at the same temperature resulted from an increase in the propagation rate coefficient. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 267–277, 2008     

Effect of 1-Hexene Comonomer on Polyethylene Particle Growth and Kinetic Profiles

Summary: The polymer growth and the microstructure of the final polymer are greatly affected by mass transfer, especially in the early stages of polymerization. In the present work, the catalytic system (nBuCp)₂ZrCl₂/MAO immobilized over SiO₂-Al₂O₃ has been tested in ethylene-1-hexene copolymerizations using different amounts of comonomer. The catalytic activity shows a positive comonomer effect up to 1-hexene concentration of 0.724 mol/L since larger amounts of 1-hexene lead to a decrease in the activity. Copolymer properties analyzed by ¹³C NMR, GPC, CRYSTAF and DSC point to the presence of important amorphous regions in the growing polymer chains as the 1-hexene concentration increases. In order to study the incorporation of 1-hexene during ethylene polymerization, several experiments were performed with 0.194 mol/L of 1-hexene, 5 bar of ethylene pressure and different polymerization times. The incorporation of 1-hexene decreases slightly at polymerization times above 20 minutes. From cross-sectioned SEM images it can be concluded that the presence of 1-hexene helps catalyst fragmentation which could be related with the filter effect proposed by Fink.     

Surface chemistry of selected supported metallocene catalysts studied by DR‐FTIR,CPMAS NMR,and XPS techniques

Two supported metallocene catalysts (CS 1: PQ 3030/MAO/Cp₂ZrCl₂ and CS 2: PQ 3030‐BuGeCl₃/MAO/Cp₂ ZrCl₂) were prepared by sequentially loading MAO and Cp₂ZrCl₂ on partially dehydroxylated silica PQ 3030. In catalyst CS 2, ⁿBuGeCl₃ was used to functionalize the silica. These catalysts were characterized by DR‐FTIR spectroscopy, CPMAS NMR spectroscopy, and XPS. Their catalytic performance was evaluated by polymerizing ethylene using the MAO cocatalyst and characterizing the resulting polymers by GPC. Both catalysts produced two metallocenium cations (Cation 1: [Cp₂ZrCl]⁺ and Cation 2: [Cp₂ZrMe]⁺) with comparable equilibrium concentrations and showed varying solid‐state electronic environments. The modified supports (PQ 3030/MAO and PQ 3030‐BuGeCl₃/MAO) acted as weakly coordinating polyanions and stabilized the above cations. BuGeCl₃ did not affect the solid‐state electronic environment. However, it increased the surface cocatalyst to catalyst molar ratio (Al:Zr), acted as a spacer, increased catalyst activity, and enhanced chain‐transfer reactions. The separately fed MAO cocatalyst shifted the equilibrium between Cation 1 and Cation 2 toward the right. Consequently, more Cation 2 was generated, which acted as the effective and active single‐site catalytic species producing monomodal PDI. Copyright © 2006 John Wiley & Sons, Ltd.     

High molar mass ethene/1‐olefin copolymers synthesized with acenaphthyl substituted metallocene catalysts

The influence of ligand structure on copolymerization properties of metallocene catalysts was elucidated with three C₁‐symmetric methylalumoxane (MAO) activated zirconocene dichlorides, ethylene(1‐(7, 9)‐diphenylcyclopenta‐[a]‐acenaphthadienyl‐2‐phenyl‐2‐cyclopentadienyl)ZrCl₂ ( 1 ), ethylene(1‐(7, 9)‐diphenylcyclopenta‐[a]‐acenaphthadienyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 2 ), and ethylene(1‐(9)‐fluorenyl‐(R)1‐phenyl‐2‐(1‐indenyl)ZrCl2 ( 3 ). Polyethenes produced with 1 /MAO had considerable, ca. 10% amount of trans‐vinylene end groups, resulting from the chain end isomerization prior to the chain termination. When ethene was copolymerized with 1‐hexene or 1‐hexadecene using 1 /MAO, molar mass of the copolymers varied from high to moderate (531–116 kg/mol) depending on the comonomer feed. At 50% comonomer feed, ethene/1‐olefin copolymers with high hexene or hexadecene content (around 10%) were achievable. In the series of catalysts, polyethenes with highest molar mass, up to 985 kg/mol, were obtained with sterically most crowded 2 /MAO, but the catalyst was only moderately active to copolymerize higher olefins. Catalyst 3 /MAO produced polyethenes with extremely small amounts of trans‐vinylene end groups and relatively low molar mass 1‐hexene copolymers (from 157 to 38 kg/mol) with similar comonomer content as 1 . These results indicate that the catalyst structure, which favors chain end isomerization, is also capable to produce high molar mass 1‐olefin copolymers with high comonomer content. In addition, an exceptionally strong synergetic effect of the comonomer on the polymerization activity was observed with catalyst 3 /MAO. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 373–382, 2008     

Comparison of the catalytic activity of Ziegler-type catalysts based on Cp2ZrCl2 and (Cp2ZrCl)2O

The rates of ethylene polymerization catalyzed by Cp₂ZrCl₂-polymethylalumoxane and (Cp₂ZrCl)₂O-polymethylalumoxane are equal. According to NMR and ESR spectral data, the same precatalyst, presumably Cp₂ZrMe₂, is formed in both systems by the action of AlMe₃. This accounts for the equal catalytic activity of the systems based on Cp₂ZrCl₂ and (Cp₂ZrCl)₂O. A scheme of reactions resulting in cleavage of the Zr-O-Zr bridge is proposed and confirmed by spectroscopic data.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2104–2107, December, 1993.     

Ethylene–hexene copolymerization by heterogeneous and homogeneous Ziegler–Natta catalysts and the “comonomer” effect

Homopolymerization of ethylene and 1-hexene and their copolymerizations were compared to investigate the influence of α-olefin on the enhancement of ethylene polymerization rate (R_p), which is often referred to as the “comonomer” effect. With the two homogeneous Ziegler–Natta catalysts, Et[Ind]₂ZrCl₂/MAO and (π-C₅H₅)₂ZrCl₂/MAO (MAO = methylaluminoxane), hexene causes reduction of R_p—in other words a negative “comonomer” effect. In the case of the high activity MgCl₂ supported TiCl₃ catalysts there is a slight positive “comonomer” effect; the R_p increases by 25 to 70% with the addition of 15 mol % of hexene. The “comonomer” effects in there catalyst systems are much smaller than that observed for the classical TiCl₃ catalyst. © 1993 John Wiley & Sons, Inc.     

Preparation of ethylene/α-olefins copolymers using (2-RInd)2ZrCl2/MCM-41 (R:Ph,H) catalyst,microstructural study

(2-RInd)₂ZrCl₂ (R:Ph,H) catalyst was supported on MCM-41 and ethylene copolymerization behavior as well as microstructure of copolymers were studied. A steady rate–time profile behavior was observed for homo and copolymerization of ethylene using supported catalysts. It was noticed that increasing the comonomer content can result in lower physical properties. The obtained results indicated that (2-PhInd)₂ZrCl₂/MCM-41 had higher ability of comonomer incorporation than the non-substituted supported catalysts. The CCC, CCE, and ECC (C: comonomer, E: ethylene) triad sequence distribution in backbone of copolymers were negligible, that means no evidence could be detected for comonomer blocks. The polymer characterization revealed that utilizing 1-octene instead of 1-hexene as the comonomer leads to more heterogeneous distribution of chemical composition. The heterogeneity of the chemical composition distribution and the physical properties were influenced by the type of comonomer and catalyst. (2-PhInd)₂ZrCl₂/MCM-41 produced copolymers containing narrower distribution of lamellae (0.3–1 nm) than the copolymer produce using Ind₂ZrCl₂/MCM-41 (0.3–1.6 nm).     

Copolymerization of vinylcyclohexane with ethene and propene using zirconocene catalysts

Vinylcyclohexane (VCH) was copolymerized with ethene and propene using methylaluminoxane‐activated metallocene catalysts. The catalyst precursor for the ethene copolymerization was rac‐ethylenebis(indenyl)ZrCl₂ ( 1 ). Propene copolymerizations were further studied with C_s‐symmetric isopropylidene(cyclopentadienyl)(fluorenyl)ZrCl₂ ( 2 ), C₁‐symmetric ethylene(1‐indenyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 3 ), and “meso”‐dimethylsilyl[3‐benzylindenyl)(2‐methylbenz[e]indenyl)]ZrCl₂ ( 4 ). Catalyst 1 produced a random ethene–VCH copolymer with very high activity and moderate VCH incorporation. The highest comonomer content in the copolymer was 3.5 mol %. Catalysts 1 and 4 produced poly(propene‐co‐vinylcyclohexane) with moderate to good activities [up to 4900 and 15,400 kg of polymer/(mol of catalyst × h) for 1 and 4 , respectively] under similar reaction conditions but with fairly low comonomer contents (up to 1.0 and 2.0% for 1 and 4 , respectively). Catalysts 2 and 3 , both bearing a fluorenyl moiety, gave propene–VCH copolymers with only negligible amounts of the comonomer. The homopolymerization of VCH was performed with 1 as a reference, and low‐molar‐mass isotactic polyvinylcyclohexane with a low activity was obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6569–6574, 2006     

Synthesis and properties of poly‐1‐olefins

The oligomerization and polymerization of 1‐pentene using Cp₂ZrCl₂, Cp₂HfCl₂, [(CH₃)₅C₅]₂ZrCl₂, rac‐[C₂H₄(Ind)₂]ZrCl₂, [(CH₃)₂Si(Ind)₂]ZrCl₂, (CH₃)₂Si(2‐methylbenz[e]indenyl)₂ZrCl₂, Cp₂ZrCl{O(Me)CW(CO)₅}, Cp₂ZrCl(OMe) and methylaluminoxane (MAO) has been studied. The degree of polymerization was highly dependent on the metallocene catalyst. Oligomers ranging from the dimer of 1‐pentene to polymers of poly‐1‐pentene with a molar mass M_w = 149000 g/mol were formed. Cp₂ZrCl{O(Me)CW(CO)₅} is a new highly active catalyst for the oligomerization of 1‐pentene to low molecular weight products. The activity decreases in the order Cp₂ZrCl{O(Me)CW(CO)₅} > Cp₂ZrCl₂ > Cp₂ZrCl(OMe). Furthermore, poly‐1‐olefins ranging from poly‐1‐pentene to poly‐1‐octadecene were synthesized with (CH₃)₂Si(2‐methyl‐benz[e]indenyl)₂ZrCl₂ and methylaluminoxane (MAO) at different temperatures. The temperature dependence of the molar mass can be described by a common exponential decay function irrespective of the investigated monomer.     

Carbon Nanotubes as a Ligand in Cp2ZrCl2‐Based Ethylene Polymerization

Summary: We report a simple method for tuning catalytic property of a metallocene‐based catalyst, Cp₂ZrCl₂, for ethylene polymerization by the direct adsorption of Cp₂ZrCl₂ onto multi‐walled carbon nanotubes (MWCNTs). The direct interactions between MWCNTs and the Cp rings of Cp₂ZrCl₂ controlled the polymerization behaviors, and we could generate polyethylene with an extremely high molecular weight ( = 1 000 000) at 30 °C and under 1 atm of ethylene gas.

Preparation of Cp₂ZrCl₂‐MWCNT.