Kinetic study of the iodate—iodide and chlorate—iodide reactions in acidic solutions,and a method for the microdetermination of bromide

The iodate—iodide and chlorate—iodide reactions were studied spectrophotometrically in acidic solutions by stopped-flow techniques. Intermediate products(I⁺)were followed; reaction rate constants and activation energies of the reactions were determined. A method of determining bromide was developed on the basis of its accelerating effect on the iodate—iodide reaction ; microamounts of bromide in the range 16–320 μg (10^-4–2 × 10^-3M) were determined with relative errors and relative standard deviation of about 2%.bl]     

Kinetic spectrophotometric determination of antimony(III) based on induced oxidation of tris(1,10-phenanthroline)iron(II) by chromium(VI)

The method involves the measurement of the extent of the induced reaction, which ceases a few seconds after initiation. Antimony(III) can be determined in the range 0.4–10 μg ml^-1. The standard deviation is ±0.25 μg. The method is applied to marine sediments.     

An improved spectrophotometric determination of manganese(II) with 1-(2-quinolylazo)-2,4,5-trihydroxybenzene with applications to medicinal plants and chemical reagents

The effects of organic solvent, time and temperature on the colour-forming reaction are described. For nine solvents tested, the molar absorptivities were in the range 2.0×10⁴?6.7×10⁴ mol^?1 cm^?1; best sensitivity was obtained with a 1:1 water/2-propanol solution after a standing time of 35 min; temperature should be controlled to ±2°C. Beer's law was obeyed for 0–1.45 μg ml^?1 Mn(II). The improved method was applied to determinations of manganese(II) in various herbs and chemical reagents; the values found were in the range 5.4–48.4 μg g^?1 in herbs, and 0.001-0.012% (w/w) in reagents.     

Quantitation of Diltiazem Hydrochloride in Commercial Dosage Forms by Visible Spectrophotometry

A selective and sensitive visible spectrophotometric method has been described for the quantitation of diltiazem hydrochloride in commercial dosage forms. The method is based on the reaction of the tertiary amino group of the drug with sodium hypochlorite to form the chloro drug derivative, followed by the destruction of the excess hypochlorite by sodium nitrite and the subsequent development of blue color takes place by the reaction of chloro derivative of drug with starch and potassium iodide in sodium bicarbonate medium. The maximum absorbance of the resulting blue solution is read at 540 nm. Under the optimized experimental conditions, Beer's law is obeyed in the concentration range of 2.5–25.0 μg mL^?1 with a linear regression equation of A = 9.85 × 10^?4 + 4.90 × 10^?2 C and coefficient of correlation, r = 0.9999. The molar absorptivity is found to be 2.26 × 10⁴L mol^?1 cm^?1. The limits of detection and quantitation of the proposed method are 0.12 and 0.37 μg mL^?1, respectively. The proposed method has been successfully applied for the quantitation of diltiazem hydrochloride in commercial dosage forms. The results of the proposed method compared with those of Abdellatef's spectrophotometric method presented good mean recovery with acceptable true bias of all pharmaceutical samples within ± 2.0%.     

A Sensitive Spectrophotometric Determination of Nitrite in Water and Soil

A highly sensitive spectrophotometric method for the determination of nitrite in water and soil has been developed. The reaction of nitrite with acidified potassium iodide to liberate iodine which oxidizes leuco‐crystal violet (LCV) to form crystal violet having absorption maxima at 590 nm forms the bases of this method. In aqueous medium the system obeys Beer's law in the range of 0.1 to 1.0 μg per 25 mL (0.004–0.04 ppm), while in an extractive system the range is 0.025–0.25 μg in 100 mL (0.00025–0.0025 ppm). The molar absorptivity and Sandell's sensitivity were found to be 1.54 × 10⁶ 1 mol^?1 cm^?1 and 44 pg cm^?2, respectively.     

Microdetermination of acetone in aqueous solution

Diazotized anthranilic acid has been found to be a possible reagent for the spectrophotometric microdetermination of acetone in aqueous solution. The determination range is 10–130 μg/ml. The coefficient of variation does not usually exceed 12% for 60–130 μg of acetone but increases to 2.8% at the 10-μg level. The average relative error for five determinations ranges from ?1.5 to 2%. The molar absorptivity is 9.28 × 10³ liter · mol^?1 · cm^?1 in the presence of starch as a surfactant. Possible reaction path mechanism has been suggested for the colored body formation.     

The application of the ph-stat method to metal ion-catalyzed reactions

The pH-stat method, which is well known in organic chemistry and biochemistry, is used for the kinetic determination of metal ion catalysts. Indicator reactions that involve protons can be followed by controlled addition of standard base or acid. This is illustrated by the following examples: determination of copper(II) (0.03–0.3 μg ml^-1) with the indicator reaction ascorbic acid—peroxydisulphate; determination of molybdenum(VI) (0.2–2.5 μg ml^-1) with the indicator reaction thiosulphate—hydrogen peroxide; determination of zirconium(IV) (0.2–2 μg ml^-1) with the indicator reaction iodide—hydrogen peroxide; and determination of vanadium(V) (0.2–2 μg ml^-1) with the indicator reaction iodide—bromate. For one example, the copper—ascorbic acid—peroxydisulphate reaction, it is shown that the pH-stat method has distinct advantages over closed systems, giving considerably better sensitivity for the determination of copper (0.5–5 ng ml^-1 ).     

Determination of Labetalol Hydrochloride in Drug Formulations by Spectrophotometry

A validated, selective and sensitive spectrophotometric method has been developed for the determination of labetalol hydrochloride in commercial dosage forms. The method is based on the coupling reaction of positive diazonium ion of 4‐aminobenzenesulfonic acid with phenolate ion of labetalol to form a colored azo compound which absorbs maximally at 395 nm. Under the optimized experimental conditions, the color is stable up to 2 h and Beer's law is obeyed in the concentration range of 0.8–17.6 μg mL^?1 with a linear regression equation of A = 4.84 × 10^?4 + 7.864 × 10^?2 C and coefficient of correlation, r = 0.9999. The molar absorptivity and Sandell's sensitivity are found to be 2.874 × 10⁴ L mol^?1 cm^?1 and 0.013 μg cm^?2 per 0.001‐absorbance unit, respectively. The limits of detection and quantitation of the proposed method are 0.08 and 0.23 μg mL^?1, respectively. The intra‐day and inter‐day precision variation and accuracy of the proposed method is acceptable with low values of standard analytical error. The recovery results obtained by the proposed method in drug formulations are acceptable with mean percent recovery ± RSD of 99.97 ± 0.52 ‐ 100.03 ± 0.63%. The results of the proposed method compared with those of Bilal's spectrophotometric method indicated excellent agreement with acceptable true bias of all samples within ± 2.0%.     

Colorimetric Determination of Seleniumin Various Environmental Samples

A new reagent system using rhodamine‐B dye for the determination of selenium is described. The method is based on the reaction of selenium with acidified potassium iodide to liberate iodine. The liberated iodine bleaches the pink colour rhodamine‐B, which is measured at 555 nm. Beer's law is obeyed over the concentration range of 1–10 μg of selenium final solution volume of 25 mL (0.04–0.4 ppm) and the apparent molar absorptivity and Sandell's sensitivity was found to be 1.96× 10⁵ l mol^?1 cm^?1 and 0.0004 μg cm^?2, respectively. The method is simple, sensitive, and selective and is satisfactorily applied to micro‐level determination of selenium in various environmental and cosmetic samples.     

Sensitive spectrofluorimetric determination of zinc at ultra-trace levels

An ultra-trace method based on the reaction of zinc with salicylthiocarbohydrazone (SATCH) and Triton X-100 as a non-ionic surfactant was developed for the fluorimetric determination of zinc at the picogram level. The reaction is carried out in the pH range 4.4–4.7 in an aqueous ethanolic medium [52% (v/v) ethanol]. The influence of the reaction variables is discussed. The detection limit is 10 pg ml^?1 and the range of application is 0.01–500 μg l^?1, with an optimum range of 0.04–400 μg l^?1. The relative standard deviations are 0.68% (0.01–0.1 μg l^?1 of zinc), 0.41% (0.1–1.0 μg l^?1 of zinc), 0.64% (1–10 μg l^?1 of zinc), 0.82% (10–100 μg l^?1 of zinc) and 0.15% (100–500 μg l^?1 of zinc). The method is highly sensitive and selective in the presence of Cd^II and Hg^II. The effect of interferences from other metal ions and anions was studied; the masking action is discussed. The advantages of the proposed method include its high sensitivity, simplicity and selectivity.     

Comparison of passive and active sampling methods for the determination of nitrogen dioxide in urban air

Three different methods for sampling and determination of nitrogen dioxide in urban air are compared: an NO/NO_x-monitor and an active (pumped) and a passive sampling method. For the latter two methods, sodium iodide is used as absorbent. For weekly averages the results from the passive sampler are within 10–20% of the results for the two other methods in the concentration range 15–30 μg NO₂/m³. The detection limit for the passive sampler is 1 μg NO₂/m³ (7 days), the precision is 5% and the accuracy is estimated to 20%. The active iodide method agrees very well with the NO/NO_x-monitor. Compared on 24 h basis for a period of 3 months, covering a concentration range of 5–45 μg NO₂/m³, the deviation between the two methods is within 5%, and the absorption capacity of the iodide reagent is excellent as the breakthrough is below 1%.     

Electrothermal atomic absorption spectrometry determination of molybdenum in whole blood

A method for the determination of molybdenum in whole blood by atomic absorption spectrometry with electrothermal atomization was developed and evaluated. Erbium (25 μg) was chosen from several potential chemical modifiers (Sm, Lu, Ho, Eu and Pd+Mg) as the most appropriate for the sensitive and reliable determination of molybdenum in such sample. The process used was direct dilution of the sample in a ratio 1:2 with a 0.1% (v/v) Triton X-100 solution. The injection of 20 μl of a solution of 15% (w/v) hydrogen peroxide and running the temperature program after 5 firings greatly reduced the effect of build-up of carbonaceous residues within the atomizer. The limit of detection and working ranges, respectively, were 0.6 and 2.0–100.0 μg l⁻¹, and the characteristic mass was 7.2 pg. The relative standard deviation varied from 0.8 to 1.5% for within and between batch determinations, respectively. The determination of molybdenum in Seronorm™ Trace Elements in Whole Blood with known added amounts of the analyte was performed to asses the accuracy. The optimized procedure has been applied to the determination of molybdenum in whole blood specimens of 20 subjects taken before and 10–12 h after receiving an over-supply of 1 mg of molybdenum. The molybdenum concentrations (±S.D.) were 10.9±0.4 μg Mo l⁻¹ (range 9.9–11.6 μg Mo l⁻¹) and 15.4±0.4 μg Mo l⁻¹ (range 13.1–16.9 μg Mo l⁻¹) for the individuals before and after the administration of molybdenum.     

Determination of total iodine in samples with an organic matrix by solid-phase spectrophotometry

A solid-phase spectrophotometry method is proposed for determining total iodine in samples with an organic matrix. The method involves the sorption of I₂ formed in oxidation of iodide with oxone (active ingredient potassium peroxomonosulfate) by polyurethane foams, followed by the registration of the adsorbent absorbance at 360 nm. Sample preparation includes treatment with an aqueous methanolic solution of tetramethylammonium hydroxide followed by thermostation at 90 ± 2°C for 3 h. The detection limit for iodine calculated using the 3s-test is 0.03 μg in a sample aliquot portion of ≤8 cm³. The relative standard deviation is 8–12% for iodine concentration in the range 0.3–5.0 μg/g.     

“Stat” methods in continuous flow analysis : Determination of Copper,Iron, Iodide and Hydrochloric Acid

A continuous flow “stat” method is described in which a certain arbitrarily imposed state in the flowing stream is automatically maintained by regulating the rate of flow of one of the components. The electronic system is regulated by measuring a physical phenomenon in the flowing solution. The method is illustrated by the examples of a continuous flow absorptiostat [Fe(III)/S₂O₃^2-/Cu(II)]for determinations of copper(II) (1–10 μg ml^-1), iron(III) (25–250 or 12.5–125 μg ml^-1), as well as for determination of iodide (12.8–128 μg ml^-1). A continuous flow conductostat [HCl/NaOH] for determination of 1–2.5 × 10^-4 M HCl is also described. This analytical technique is intended for automatic continuous monitoring of sample streams.     

Utility of p-chloranilic Acid and 2,3 Dichloro-5,6-dicyano p-Benzoquinone (DDQ) for the Spectrophotometric Determination of Triamterene

Abstract

Two simple and sensitive spectrophotometric procedures are suggested for analysis of triamterene. The first procedure is based on the reaction of triamterene with p-chloranilic acid (p-CA) in methylene chloride to form a highly stable coloured product, exhibiting maximum absorbance at λ 530 nm. Beer's law is obeyed in the range of 40–220 μg.ml^?1 with a mean percentage accuracy of 99.98 ± 0.446. Limit of determination is 20 μg.ml^?1. In the second procedure, the drug is determined via charge transfer complex formation with 2,3 dichloro-5,6-dicyano p-benzoquinone (DDQ) using methylene chloride as a solvent. Here the reaction product has two well defined maxima at 460 nm and 530 nm where each has been utilized for quantitative determination. Beer's law is obeyed in concentration ranges of 25–125 μg.ml^?1 and 25–150 μg.ml^?1 with mean percentage accuracies of 99.92 ± 0.449 and 100.00 ± 0.511 for both maxima. 460 and 530 nm. respectively. Limit of determination is 12.5 μg.ml^?1 at both maxima. Optimum conditions for each procedure have been studied and the stoichiometry of both reactions was ascertained using Job's method of continuous variation. The validity of the suggested procedures was assessed by applying the standard addition technique using the drug capsules. Both procedures are statistically analyzed as compared with BP method for analysis of triamterene (non aqueous titration) revealing good accuracy and precision as indicated by t and F tests.     

Development of an effective extraction process for coenzyme Q10 from Artemia

A method for extracting coenzyme Q₁₀ (CoQ₁₀) from Artemia was developed. 1 g of fresh Artemia was incubated with 75 % acetic acid at (30 ± 2)°C for 24 h, followed by three consecutive extractions with a mixture of 5 mL of hexane and 5 mL of ethanol, then analysis by a validated high-performance liquid chromatography with a diode-array detector. The calibration curve for CoQ₁₀ was linear in a range of 1–50 μg mL^?1. The limits of detection and quantification were 0.3 μg mL^?1 and 1.1 μg mL^?1, respectively. Mean recoveries were 94–100 % with a high precision of below 10 %. The method developed was found to be simple, efficient and the time required for releasing CoQ₁₀ from Artemia was short. The method provides not only low energy consumption but is also practical for industrial applications.     

An LC–MS/MS method for the quantification of diclofenac sodium in dairy cow plasma and its application in pharmacokinetics studies

An LC–MS/MS method with internal standard tolfenamic acid for determining diclofenac sodium (DCF) in dairy cow plasma was developed and validated. Samples were processed with protein precipitation by cold formic acid–acetonitrile. Determination of DCF was performed using LC–ESI⁺–MS/MS with the matrix‐matched calibration curve. The results showed that the method was sensitive (LOD 2 ng mL^?1, LOQ 5 ng mL^?1), accurate (97.60 ± 5.64%), precise (<10%) and linear in the range of 5–10,000 ng mL^?1. A single intravenous (i.v.) or intramuscular (i.m.) administration of 5% diclofenac sodium injection at a dose of 2.2 mg kg^?1 was performed in six healthy dairy cows according to a two‐period crossover design. The main pharmacokinetic (PK) parameters after a single i.v. administration were as follows: t_1/2β, 4.52 ± 1.71 h; AUC, 77.79 ± 16.76 h μg mL^?1; mean residence time, 5.16 ± 1.11 h. The main PK parameters after a single i.m. administration were as follows: T_max, 2.38 ± 1.19 h; C_max, 7.46 ± 1.85 μg mL^?1; t_1/2β, 9.46 ± 2.86 h; AUC 67.57 ± 13.07 h μg mL^?1. The absolute bioavailability was 87.37 ± 5.96%. The results showed that the diclofenac sodium injection had PK characteristics of rapid absorption and slow elimination, and high peak concentration and bioavailability in dairy cows, and that the recommended clinical dosage of diclofenac sodium injection is 2.2 mg kg^?1.     

Determination of copper by its catalytic effect on the oxidation of hydroquinone by hydrogen peroxide on supports

The reaction of oxidation of hydroquinone by hydrogen peroxide catalyzed by copper(II) in the presence of 2,2’-dipyridyl is activated by hexamethylenediamino groups that are bonded to the surface of filter paper; additional activating effect is produced by 2,2′-dipyridyl. The introduction of malonic acid dinitrile into the indicator reaction improves the sensitivity of the determination of copper and the contrast of the reaction in solution because of the formation of a blue product. Differently colored compounds are formed on a paper support at different concentrations of copper, which makes it possible to visually distinguish the quantities of copper that differ by an order of magnitude in the range 1 × 10^-5-0.5 μg. Quantitative detection is possible in the range 5 × 10^-6-0.1 μg (c_min = 3 × 10^-6 μg). The concentration of copper (0.2-1.5 μg/mL) is determined in blood serum; the consumption of the sample per one determination is 3 μL     

Substoichiometric isotope-dilution analysis for strontium by liquid-liquid extraction with a macrocyclic crown ether or cryptand

Strontium(II) is substoichiometrically extracted into 1,2-dichloroethane with 1.0 × 10^?4 M cryptand-2.2.2 or 18-crown-6 in the presence of 1.0 ×10.2 M picrate at pH 8–10 or 7–9, respectively. A constant substoichiometric amount of strontium(II) is extracted (relative standard deviation, 0.5%). The method combined with isotope dilution is applied to determine strontium(II) in a seaweed sample (Laminaria religiosa Miyabe); the values obtained were 546 ± 9 μg g^?1 with cryptand-2.2.2 and 546 ± 7 μg g^?1 with 18-crown-6.     

Spectrophotometric Determination of Trace Amounts of Ascorbic Acid

Abstract

Colourless silver-gelatin complex is quantitatively reduced by ascorbic acid to yellow silver sol in water within the pH range 7.5–10.0 at room temperature. The determination of 1–10μg/ml of ascorbic acid is possible at 415 nm in the presence of glycine, alanine, fructose, sucrose, citric, tartaric, oxalic, malic, succinic acids and also in the presence of various reducing agents. The molar absorptivity of ascorbic acid at the δ_max is found to be 21500 lit mol^?1 cm^?1 and the Sandell sensitivity of the sol is 8.18x10^?3 μg ascorbic acid cm^?2 for 0.001 absorbance. The relative standard deviation is ±0.22% and the confidence limit (20 determinations, 95%) being 8.806±0.0093%.