One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

A three‐dimensional CdII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands

The title coordination polymer, poly[[aqua(μ₅‐1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dicadmium(II)] dihydrate], {[Cd₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)₂(H₂O)]·2H₂O}_n, was crystallized from a mixture of 1,1′‐biphenyl‐2,2′,5,5′‐tetracarboxylic acid (H₄bpta), 1,4‐bis(1H‐imidazol‐1‐yl)benzene (1,4‐bib) and cadmium nitrate in water–dimethylformamide. The crystal structure consists of two crystallographically independent Cd^II cations, with one of the Cd^II cations possessing a slightly distorted pentagonal bipyramidal geometry. The second Cd^II centre is coordinated by carboxylate O atoms and imidazole N atoms from two separate 1,4‐bib ligands, displaying a distorted octahedral CdN₂O₄ geometry. The completely deprotonated bpta⁴⁻ ligand, exhibiting a new coordination mode, bridges five Cd^II cations to form one‐dimensional chains viaμ₃‐η¹:η²:η¹:η² and μ₂‐η¹:η¹:η⁰:η⁰ modes, and these are further linked by 1,4‐bib ligands to form a three‐dimensional framework with a (4².6⁴)(4.6²)(4³.6⁵.7²) topology. The structure of the coordination polymer is reinforced by intermolecular hydrogen bonding between carboxylate O atoms, aqua ligands and crystallization water molecules. The solid‐state photoluminescence properties were investigated and the complex might be a candidate for a thermally stable and solvent‐resistant blue fluorescent material.     

Nucleosides and Oligonucleotides with Diynyl Side Chains: Base Pairing and Functionalization of 2′‐Deoxyuridine Derivatives by the Copper(I)‐Catalyzed Alkyne?Azide ‘Click’ Cycloaddition

Oligonucleotides containing the 5‐substituted 2′‐deoxyuridines 1b or 1d bearing side chains with terminal C?C bonds are described, and their duplex stability is compared with oligonucleotides containing the 5‐alkynyl compounds 1a or 1c with only one nonterminal C?C bond in the side chain. For this, 5‐iodo‐2′‐deoxyuridine ( 3 ) and diynes or alkynes were employed as starting materials in the Sonogashira cross‐coupling reaction (Scheme 1). Phosphoramidites 2b – d were prepared (Scheme 3) and used as building blocks in solid‐phase synthesis. T_m Measurements demonstrated that DNA duplexes containing the octa‐1,7‐diynyl side chain or a diprop‐2‐ynyl ether residue, i.e., containing 1b or 1d , are more stable than those containing only one triple bond, i.e., 1a or 1c (Table 3). The diyne‐modified nucleosides were employed in further functionalization reactions by using the protocol of the Cu^I‐catalyzed Huisgen–Meldal–Sharpless [2+3] cycloaddition (‘click chemistry’) (Scheme 2). An aliphatic azide, i. e., 3′‐azido‐3′‐deoxythymidine (AZT; 4 ), as well as the aromatic azido compound 5 were linked to the terminal alkyne group resulting in 1H‐1,2,3‐triazole‐modified derivatives 6 and 7 , respectively (Scheme 2), of which 6 forms a stable duplex DNA (Table 3). The Husigen–Meldal–Sharpless cycloaddition was also performed with oligonucleotides (Schemes 4 and 5).     

A three‐dimensional ZnII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands exhibiting photoluminescence

Ligands based on polycarboxylic acids are excellent building blocks for the construction of coordination polymers; they may bind to a variety of metal ions and form clusters, as well as extended chain or network structures. Among these building blocks, biphenyltetracarboxylic acids (H₄bpta) with C ₂ symmetry have recently attracted attention because of their variable bridging and multidentate chelating modes. The new luminescent three‐dimensional coordination polymer poly[(μ₅‐1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dizinc(II)], [Zn₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)]_n , was synthesized solvothermally and characterized by single‐crystal X‐ray diffraction, elemental analysis and IR spectroscopy. The crystal structure contains two crystallographically independent Zn^II cations. Both metal cations are located on twofold axes and display distorted tetrahedral coordination geometries. Neighbouring Zn^II centres are bridged by carboxylate groups in the syn –anti mode to form one‐dimensional chains. Adjacent chains are linked through 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands to form a three‐dimensional network. In the solid state, the compound exhibits blue photoluminescence and represents a promising candidate for a thermally stable and solvent‐resistant blue fluorescent material.     

Electronic spectra and first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐ (2′‐thiophene‐vinyl)‐pyran derivatives

On the basis of the ZINDO program, we have designed a program to calculate the first‐order hyperpolarizability β_ijk and β_μ according to the sum‐over‐states (SOS) expression. The first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives were studied. The calculated results were that the 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives exhibit good nonlinearity with their β₀ values, which are slightly less than that of the corresponding 2,6‐bis‐styryl‐4‐(dicyanomethylene)‐pyran derivatives. It does not agree with the auxiliary donor–acceptor effects theory. The 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives, having two low‐lying electronic excited states that contribute to the molecular hyperpolarizability in an additive manner, are good candidates as chromophores due to their high nonlinearities and good thermal stability. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 82: 65–72, 2001     

Electrochemical Reduction of 4,4′‐(2,2,2‐Trichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDT) and 4,4′‐(2,2‐Dichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDD) at Carbon Cathodes in Dimethylformamide

In dimethylformamide containing tetramethylammonium tetrafluoroborate, cyclic voltammograms for reduction of 4,4′‐(2,2,2‐trichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDT) at a glassy carbon cathode exhibit five waves, whereas three waves are observed for the reduction of 4,4′‐(2,2‐dichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDD). Bulk electrolyses of DDT and DDD afford 4,4′‐(ethene‐1,1‐diyl)bis(chlorobenzene) (DDNU) as principal product (67–94%), together with 4,4′‐(2‐chloroethene‐1,1‐diyl)bis(chlorobenzene) (DDMU), 1‐chloro‐4‐styrylbenzene, and traces of both 1,1‐diphenylethane and 4,4′‐(ethane‐1,1‐diyl)bis(chlorobenzene) (DDO). For electrolyses of DDT and DDD, the coulometric n values are essentially 4 and 2, respectively. When DDT is reduced in the presence of a large excess of D₂O, the resulting DDNU and DDMU are almost fully deuterated, indicating that reductive cleavage of the carbon–chlorine bonds of DDT is a two‐electron process that involves carbanion intermediates. A mechanistic scheme is proposed to account for the formation of the various products.     

Two Bulky Conjugated 4′‐(4‐Hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine‐based Layered Complexes: Synthesis,Structure, and Photocatalytic Hydrogen Evolution Activity

Two new layered complexes with the formulas of {[Cu(H₂O)(HL)₂Cl](NO₃)}_n ( 1 ) and {[Cu(H₂O)₂(HL)₂](NO₃)₂}_n ( 2 ) were solvothermally synthesized by the reactions of the bulky conjugated 4′‐(4‐hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine ligand (HL) with different Cu^II salts, which were further used as photocatalysts to achieve hydrogen production from water splitting. Single‐crystal structural analyses reveal that both complexes feature coplanar (4 4) layers with different connection manners between the HL extended Z‐shaped chains. More interestingly, 1 possessing more negative conduction band potential and higher structural stability exhibits a large hydrogen production rate of 2.43 mmol · g^–1 · h^–1, which is four times higher than that of 2 . Thus, the Cu^II‐based coordination polymers modified by the bulky conjugated organic ligand can become potentially promising non‐Pt photocatalysts for hydrogen production from water splitting.     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

Two Zinc(II) Coordination Polymers Based on Terphenyl‐2,2′,4,4′‐tetracarboxylate and Dipyridyl Ligands: Syntheses,Crystal Structures,and Luminescent Properties

Two coordination polymers, {[Zn₂(L)(bpy)] · 2H₂O}_n ( 1 ) and [Zn₂(L)(bpe)]_n ( 2 ) [H₄L = terphenyl‐2,2′,4,4′‐tetracarboxylic acid, bpy = 4,4′‐bipyridine, and bpe = 1,2‐bis(4‐pyridyl)ethane], were hydrothermally synthesized under similar conditions and characterized by elemental analysis, IR spectroscopy, TGA, and single‐crystal X‐ray diffraction analysis. Compound 1 has a 3D framework containing Zn–O–C–O–Zn 1D chains. Compound 2 exhibits a 3D framework, which features tubular channels. The channels are occupied by bpe molecules. The differences in the structures demonstrate that the auxiliary dipyridyl‐containing ligand has a significant effect on the construction of the final framework. Additionally, the fluorescent properties of the two compounds were also studied in the solid state at room temperature.     

Dinuclear Complexes of Copper(I) with Crown Ether‐containing N‐Thiophosphorylated Bis‐thioureas and 2,2′‐Bipyridine or 1,10‐Phenanthroline: Synthesis,Characterization, and Picrate Extraction Properties

Reaction of O,O′‐diisopropylthiophosphoric acid isothiocyanate (iPrO)₂P(S)NCS with 1,10‐diaza‐18‐crown‐6, 1,7‐diaza‐18‐crown‐6, or 1,7‐diaza‐15‐crown‐5 leads to the N‐thiophosphorylated bis‐thioureas N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6 ( H₂L^I ), N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,7‐diaza‐18‐crown‐6 ( H₂L^II ) and N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,7‐diaza‐15‐crown‐5 ( H₂L^III ). Reaction of the potassium salts of H₂L^I–III with a mixture of CuI and 2,2′‐bipyridine ( bpy ) or 1,10‐phenanthroline ( phen ) in aqueous EtOH/CH₂Cl₂ leads to the dinuclear complexes [Cu₂(bpy)₂L^I–III] and [Cu₂(phen)₂L^I–III] . The structures of these compounds were investigated by ¹H, ³¹P{¹H} NMR spectroscopy, and elemental analysis. The crystal structures of H₂L^I and [Cu₂(phen)₂L^I] were determined by single‐crystal X‐ray diffraction. Extraction capacities of the obtained compounds in comparison to the related compounds 1,10‐diaza‐18‐crown‐6, N,N′‐bis[C(=CMe₂)CH₂P(O)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6, N,N′‐bis[C(S)NHP(O)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6 towards the picrate salts LiPic, NaPic, KPic. and NH₄Pic were also studied.     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

Synthesen und Strukturen von Bis(4,4′‐t‐butyl‐2,2′‐bipyridin)‐Ruthenium(II)‐Komplexen mit funktionellen Derivaten des Tetramethyl‐bibenzimidazols

Syntheses and Structures of Bis(4,4′‐t‐butyl‐2,2′‐bipyridine) Ruthenium(II) Complexes with functional Derivatives of Tetramethyl‐bibenzimidazole [(tbbpy)₂RuCl₂] reacts with dinitro‐tetramethylbibenzimidazole ( A ) in DMF to form the complex [(tbbpy)₂Ru( A )](PF₆)₂ ( 1a ) (tbbpy: bis(4,4′‐t‐butyl)‐2,2′bipyridine). Exchange of the two PF₆^? anions by a mixture of tetrafluor‐terephthalat/tetrafluor‐terephthalic acid results in the formation of 1b in which an extended hydrogen‐bonded network is formed. According to the ¹H NMR spectra and X‐ray analyses of both 1a and 1b , the two nitro groups of the bibenzimidazole ligand are situated at the periphery of the complex in cis position to each other. Reduction of the nitro groups in 1a with SnCl₂/HCl results in the corresponding diamino complex 2 which is a useful starting product for further functionalization reactions. Substitution of the two amino groups in 2 by bromide or iodide via Sandmeyer reaction results in the crystalline complexes [(tbbpy)₂Ru( C )](PF₆)₂ and [(tbbpy)₂Ru( D )](PF₆)₂ ( C : dibromo‐tetrabibenzimidazole, D : diiodo‐tetrabibenzimidazole). Furthermore, 2 readily reacts with 4‐t‐butyl‐salicylaldehyde or pyridine‐2‐carbaldehyde under formation of the corresponding Schiff base Ru^II complexes 5 and 6 . ¹H NMR spectra show that the substituents (NH₂, Br, I, azomethines) in 2 ‐ 6 are also situated in peripheral positions, cis to each other. The solid state structure of both 2 , and 3 , determined by X‐ray analyses confirm this structure. In addition, the X‐ray diffraction analyses of single crystals of the complexes [(tri‐t‐butyl‐terpy)(Cl)Ru( A )] ( 7 ) and [( A )PtCl₂] ( 8 ) display also that the nitro groups in these complexes are in a cis‐arrangement.     

Synthesis of spiro[indoline‐3,3′‐pyrrolizines] by 1,3‐dipolar reactions between isatins,l‐proline and electron‐deficient alkenes

Two spiro[indoline‐3,3′‐pyrrolizine] derivatives have been synthesized in good yield with high regio‐ and stereospecificity using one‐pot reactions between readily available starting materials, namely l ‐proline, substituted 1H‐indole‐2,3‐diones and electron‐deficient alkenes. The products have been fully characterized by elemental analysis, IR and NMR spectroscopy, mass spectrometry and crystal structure analysis. In (1′RS ,2′RS ,3SR ,7a′SR )‐2′‐benzoyl‐1‐hexyl‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine]‐1′‐carboxylic acid, C₂₈H₃₂N₂O₄, (I), the unsubstituted pyrrole ring and the reduced spiro‐fused pyrrole ring adopt half‐chair and envelope conformations, respectively, while in (1′RS ,2′RS ,3SR ,7a′SR )‐1′,2′‐bis(4‐chlorobenzoyl)‐5,7‐dichloro‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine], which crystallizes as a partial dichloromethane solvate, C₂₈H₂₀Cl₄N₂O₃·0.981CH₂Cl₂, (II), where the solvent component is disordered over three sets of atomic sites, these two rings adopt envelope and half‐chair conformations, respectively. Molecules of (I) are linked by an O—H…·O hydrogen bond to form cyclic R ₆⁶(48) hexamers of (S ₆) symmetry, which are further linked by two C—H…O hydrogen bonds to form a three‐dimensional framework structure. In compound (II), inversion‐related pairs of N—H…O hydrogen bonds link the spiro[indoline‐3,3′‐pyrrolizine] molecules into simple R ₂²(8) dimers.     

Two ZnII‐based MOFs constructed with biphenyl‐2,2′,5,5′‐tetracarboxylic acid and flexible N‐donor ligands: syntheses,structures and properties

Two new Zn²⁺‐based metal–organic frameworks (MOFs) based on biphenyl‐2,2′,5,5′‐tetracarboxylic acid, i.e. H₄(o,m‐bpta), and N‐donor ligands, namely, poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] dimethylformamide monosolvate dihydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·C₃H₇NO·2H₂O}_n or {[Zn₂(o,m‐bpta)(1,3‐bimb)₂]·C₃H₇NO·2H₂O}_n ( 1 ) {1,3‐bimb = [1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}, and poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] monohydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·H₂O}_n or {[Zn₂(o,m‐bpta)(1,4‐bimb)₂]·H₂O}_n ( 2 ) {1,4‐bimb = [1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}, have been synthesized under solvothermal conditions. The complexes were characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction analysis. Structurally, the (o,m‐bpta)^4? ligands are fully deprotonated and combine with Zn²⁺ ions in μ₄‐coordination modes. Complex 1 is a (3,4)‐connected porous network with honeycomb‐like [Zn₂(o,m‐bpta)]_n sheets formed by 4‐connected (o,m‐bpta)^4? ligands. Complex 2 exhibits a (2,4)‐connected network formed by 4‐connected (o,m‐bpta)^4? ligands linking Zn²⁺ ions in left‐handed helical chains. The cis‐configured 1,3‐bimb and 1,4‐bimb ligands bridge Zn²⁺ ions to form multi‐membered [Zn₂(bimb)₂] loops. Optically, the complexes show strong fluorescence and display larger red shifts compared to free H₄(o,m‐bpta). Complex 2 shows ferroelectric properties due to crystallizing in the C_2v polar point group.     

Cobalt(II) chloride complexes with 1,1′‐dimethyl‐4,4′‐bipyrazole featuring first‐ and second‐sphere coordination of the ligand

In catena‐poly[[dichloridocobalt(II)]‐μ‐(1,1′‐dimethyl‐4,4′‐bipyrazole‐κ²N²:N^2′)], [CoCl₂(C₈H₁₀N₄)]_n, (1), two independent bipyrazole ligands (Me₂bpz) are situated across centres of inversion and in tetraaquabis(1,1′‐dimethyl‐4,4′‐bipyrazole‐κN²)cobalt(II) dichloride–1,1′‐dimethyl‐4,4′‐bipyrazole–water (1/2/2), [Co(C₈H₁₀N₄)₂(H₂O)₄]Cl₂·2C₈H₁₀N₄·2H₂O, (2), the Co²⁺ cation lies on an inversion centre and two noncoordinated Me₂bpz molecules are also situated across centres of inversion. The compounds are the first complexes involving N,N′‐disubstituted 4,4′‐bipyrazole tectons. They reveal a relatively poor coordination ability of the ligand, resulting in a Co–pyrazole coordination ratio of only 1:2. Compound (1) adopts a zigzag chain structure with bitopic Me₂bpz links between tetrahedral Co^II ions. Interchain interactions occur by means of very weak C—H...Cl hydrogen bonding. Complex (2) comprises discrete octahedral trans‐[Co(Me₂bpz)₂(H₂O)₄]²⁺ cations formed by monodentate Me₂bpz ligands. Two equivalents of additional noncoordinated Me₂bpz tectons are important as `second‐sphere ligands' connecting the cations by means of relatively strong O—H...N hydrogen bonding with generation of doubly interpenetrated pcu (α‐Po) frameworks. Noncoordinated chloride anions and solvent water molecules afford hydrogen‐bonded [(Cl⁻)₂(H₂O)₂] rhombs, which establish topological links between the above frameworks, producing a rare eight‐coordinated uninodal net of {4²⁴.5.6³} ( ilc ) topology.     

Diversity‐Oriented Synthesis of Novel 2′‐Aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] Derivatives via a One‐Pot Four‐Component Reaction

A sequential one‐pot four‐component reaction for the efficient synthesis of novel 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] derivatives 5 in the presence of AcONH₄ as a neutral, inexpensive, and dually activating catalyst is described (Scheme 1). The syntheses are achieved by reacting ninhydrin ( 1 ) with benzene‐1,2‐diamines 2 to give indenoquinoxalines, which are trapped in situ by malono derivatives 2 and various α‐methylenecarbonyl compounds 4 through cyclization, providing the multifunctionalized 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] analogs 5 . This chemistry provides an efficient and promising synthetic way of proceeding for the diversity‐oriented construction of the spiro[indenoquinoxalino‐pyran] skeleton.     

Effect of Metal Ions on the Structures of Coordination Polymers Based on Biphenyl‐2,2′,4,4′‐Tetracarboxylate

Two new coordination polymers, {[Cd₂(btc)(2,2′‐bpy)₂] · H₂O}_n ( 1 ) and [Zn₂(btc)(2,2′‐bpy)(H₂O)]_n ( 2 ) (H₄btc = biphenyl‐2,2′,4,4′‐tetracarboxylic acid, 2,2′‐bpy = 2,2′‐bipyridine), were synthesized hydrothermally under similar conditions and characterized by elemental analysis, IR spectra, TGA, and single‐crystal X‐ray diffraction analysis. In complexes 1 and 2 , the (btc)^4– ligand acts as connectors to link metal ions to give a 2D bilayer network of 1 and a 3D metal‐organic framework of 2 , respectively. The differences in the structures are induced by diverging coordination modes of the (btc)^4– ligand, which can be attributed to the difference metal ions in sizes. The results indicate that metal ions have significant effects on the formation and structures of the final complexes. Additionally, the fluorescent properties of the two complexes were also studied in the solid state at room temperature.     

Purine 3′:5′‐cyclic nucleotides with the nucleobase in a syn orientation: cAMP,cGMP and cIMP

Purine 3′:5′‐cyclic nucleotides are very well known for their role as the secondary messengers in hormone action and cellular signal transduction. Nonetheless, their solid‐state conformational details still require investigation. Five crystals containing purine 3′:5′‐cyclic nucleotides have been obtained and structurally characterized, namely adenosine 3′:5′‐cyclic phosphate dihydrate, C₁₀H₁₂N₅O₆P·2H₂O or cAMP·2H₂O, (I), adenosine 3′:5′‐cyclic phosphate 0.3‐hydrate, C₁₀H₁₂N₅O₆P·0.3H₂O or cAMP·0.3H₂O, (II), guanosine 3′:5′‐cyclic phosphate pentahydrate, C₁₀H₁₂N₅O₇P·5H₂O or cGMP·5H₂O, (III), sodium guanosine 3′:5′‐cyclic phosphate tetrahydrate, Na⁺·C₁₀H₁₁N₅O₇P⁻·4H₂O or Na(cGMP)·4H₂O, (IV), and sodium inosine 3′:5′‐cyclic phosphate tetrahydrate, Na⁺·C₁₀H₁₀N₄O₇P⁻·4H₂O or Na(cIMP)·4H₂O, (V). Most of the cyclic nucleotide zwitterions/anions [two from four cAMP present in total in (I) and (II), cGMP in (III), cGMP⁻ in (IV) and cIMP⁻ in (V)] are syn conformers about the N‐glycosidic bond, and this nucleobase arrangement is accompanied by C_rib—H…N_pur hydrogen bonds (rib = ribose and pur = purine). The base orientation is tuned by the ribose pucker. An analysis of data obtained from the Cambridge Structural Database made in the context of syn–anti conformational preferences has revealed that among the syn conformers of various purine nucleotides, cyclic nucleotides and dinucleotides predominate significantly. The interactions stabilizing the syn conformation have been indicated. The inter‐nucleotide contacts in (I)–(V) have been systematized in terms of the chemical groups involved. All five structures display three‐dimensional hydrogen‐bonded networks.     

Synthesis,crystal structure and magnetic properties of (acetato‐κ2O,O′)bis(5,5′‐dimethyl‐2,2′‐bipyridine‐κ2N,N′)nickel(II) perchlorate monohydrate

The title hydrated ionic complex, [Ni(CH₃COO)(C₁₂H₁₂N₂)₂]ClO₄·H₂O or [Ni(ac)(5,5′‐dmbpy)₂]ClO₄·H₂O (where 5,5′‐dmbpy is 5,5′‐dimethyl‐2,2′‐bipyridine and ac is acetate), (1), was isolated as violet crystals from the aqueous ethanolic nickel acetate–5,5′‐dmbpy–KClO₄ system. Within the complex cation, the Ni^II atom is hexacoordinated by two chelating 5,5′‐dmbpy ligands and one chelating ac ligand. The mean Ni—N and Ni—O bond lengths are 2.0628 (17) and 2.1341 (15) Å, respectively. The water solvent molecule is disordered over two partially occupied positions and links two complex cations and two perchlorate anions into hydrogen‐bonded centrosymmetric dimers, which are further connected by π–π interactions. The magnetic properties of (1) at low temperatures are governed by the action of single‐ion anisotropy, D, which arises from the reduced local symmetry of the cis‐NiO₂N₄ chromophore. The fitting of the variable‐temperature magnetic data (2–300 K) gives g_iso = 2.134 and D/hc = 3.13 cm⁻¹.