Spectrophotometric determination of noble metals with tin(II) in bromide solutions

In presence of tin(II) bromide, noble metals give coloured products which are suitable for spcctrophotometric determinations. The colours are red (platinum), yellow-orange (rhodium), yellow-brown (palladium), yellow (iridium) and violet (gold) They are extracted, except for gold, with isoamyl alcohol Platinum, rhodium and palladium can be separated from irdium, and rhodium and platinum from palladium. Rhodium and platinum can be determined simultaneously.     

Spectrographic determination of gold and platinum metals in geological and other materials by fire-assay preconcentration

A method is described for the determination of gold, platinum, palladium, rhodium and iridium at microgram levels in geological and other materials by a combination of fire-assay preconcentration and emission spectrography. The noble metals are collected into 4-mg silver or platinum prills by a normal fire-assay technique. These prills are arced between graphite electrodes at 12 A d.c. No buffer is required to prevent ejection of the prill. Gold, platinum and palladium are determined in the silver prills and gold, palladium, rhodium and iridium in the platinum prills. Low, but reproducible, results are found for iridium. At the 0.08 ppm level an overall coefficient of variation of 11% is found. This technique is simple and rapid for the determination of the precious metals.     

Countercurrent extraction separation of some platinum group metals: part III

The bromo complexes of platinum(IV), palladium(II), rhodium(III), and iridium(IV) were prepared and studies were made on their distribution between hydrobromic acid solutions and various common solvents. The solvents employed were n-tributyl phosphate (TBP), methyl isobutyl ketone, amyl acetate, and various TBP-benzene mixtures. Distribution coefficients as a function of HBr concentration are given for each metal for each solvent system. A careful study of the measured distribution coefficients clearly showed that a number of binary and ternary mixtures of the metals can be resolved with a Craig countercurrent distribution apparatus. Rh-Pt and Rh-Pd mixtures in 4.38M HBr solutions were quantitatively separated on a Io-stage Craig apparatus using a 90% TBP-10% benzene solvent. Rh-Ir mixtures in 4.38 M HBr were resolved by 3 consecutive batch extractions with 90% TBP-10% benzene. Mixtures of Pd, Rh, and Ir in 4.38 M HBr were resolved in 90 stages using methyl isobutyl ketone as the solvent. Pd, Rh and Ir were recovered in 97.0, 87.6 and 94.5% yields, respectively. Mixtures of Pd, Rh and Pt in 4.38 M HBr were resolved in 90 stages using amyl acetate and methyl isobutyl ketone as solvents. Pd, Rh and Pt were recovered in 90.0, 96.0 and 94.0% yields, respectively. Two computer programs for the IBM 1620 Computer are given ; these facilitate the comparison of theoretical and actual solute distributions.     

A new solvent extraction scheme for the separation of platinum,palladium, rhodium and iridium

A new scheme is proposed for the separation of platinum, palladium, rhodium and iridium in hydrochloric acid solutions, by solvent extraction. Platinum and palladium are complexed with 2-mercaptobenzothiazole and potassium iodide and simultaneously extracted into chloroform, thus separating them from rhodium and iridium. Palladium is separated from platinum by extracting its dimethylglyoxime complex into chloroform, while rhodium is separated from iridium by extracting its 2-mercaptobenzothiazole complex into chloroform after reduction with tin(II) chloride.     

Cation-exchange behaviour of the platinum group and some other rare elements in hydrobromic acid-thiourea-acetone media

Ion-exchange distribution coefficients and elution curves are presented for copper(I), silver, gold(I), palladium, platinum(II), rhodium(III), iridium(III), ruthenium(III), osmium(III), mercury(II), thallium(I), tellurium(II), lead and bismuth in mixtures of thiourea, hydrobromic acid, acetone and water, with the cation-exchange resin AGW50W-X4. The system affords excellent separations of rhodium, mercury, silver (or copper), tellurium, gold, and palladium (or platinum) from each other.     

Preparation of Colloidal Transition Metals in Polymers by Reduction with Alcohols or Ethers

Colloidal dispersions of rhodium, palladium, osmium, iridium, and platinum are prepared by refluxing the methanol-water solutions of rhodium(III) chloride, palladium(II) chloride, osmium(VIII) oxide, sodium chloroiridate, and chloroplatinic acid, respectively, in the presence of poly(vinyl alcohol) as a protective colloid. The preparations of colloidal dispersions of rhodium are successful in the presence of vinyl polymer with polar group such as poly(vinyl alcohol), polyvinylpyrrolidone, or poly(methyl vinyl ether). Polyethyleneimine, gelatin, polyethylene glycol), and dextran are ineffective as the protective colloid. Water-soluble primary alcohols such as methanol and ethanol, water-soluble secondary alcohols such as 2-propanol, and water-soluble diethers such as 1,4-dioxane are available as reductants for preparation of the colloidal dispersion of rhodium. The average diameters of metal particles in the colloidal dispersions of palladium, rhodium, platinum, iridium, and osmium in poly(vinyl alcohol) are determined by electron microscopy to be 53, 40, 27, 14, and < 10 Å, respectively. The particle size distribution in each colloidal dispersion is sharp within 50 Å wide. The particles in the colloidal dispersions of both iridium and osmium are highly dispersed with no aggregation, while in the colloidal dispersions of rhodium, palladium, and platinum, there exist aggregates of 5-15, 5-30, and 100-200 particles, respectively. Colloidal dispersions of rhodium, palladium, osmium, and platinum are effective as catalysts for hydrogenation of cyclohexene at 30.0°C under atmospheric hydrogen pressure.     

Radiotracer study of the reduction of noble metals by amalgamated copper powder

A systematic study has been made on the reducing power of amalgamated copper powder in hydrochloric acid solution for palladium, platinum, rhodium, iridium, gold and silver. In order to apply this method to the activation analysis of palladium, platinum and rhodium in industrial concentrates which contain a large amount of ‘base elements’, the behaviour of palladium, platinum and rhodium in the presence of the ‘base elements’ has also to be considered. Research associate of I.I.K.W., Belgium     

Separation of rhodium and iridium by multiple fractional extraction

Mixtures of the chloro complexes of rhodium(III) and iridium(IV) were resolved by a nine stage multiple extraction technique. The solutes are partitioned in a hydrochloric acid-tributyl phosphate system. Rhodium is concentrated in the raffinate while iridium is concentrated in the extractant. 99% of the rhodium and 94% of the iridium are recovered free of the other metal. Experimental results agree reasonably well with the results predicted by a theoretical treatment of the distribution data.     

Determination of noble metals by resonance neutron activation technique

Rhodium, palladium, platinum and iridium have been determined in silver matrix by nondestructive activation analysis upon activation with cadmium- and silver-filtered resonance neutrons. Experiments with different types of filter combinations are reported. The sensitivity of the method is 5·10⁻³% for rhodium, 5·10⁻³% for palladium, 3·10⁻²% for platinum and 5·10⁻³% for iridium.     

A critical review of titrimetric methods for determination of the noble metals-II

Titrimetric methods for palladium, platinum, rhodium, iridium, ruthenium and gold are critically reviewed to the end of 1964. Previous reviews covered the literature to the end of 1957 for the five platinum metals and to mid-1960 for gold.     

The group VIII platinum-group metals and the Periodic Table

The six platinum group metals (pgms: ruthenium, rhodium, palladium, osmium, iridium and platinum) posed a number of problems for 19th-century chemists, including Mendeleev, for their Periodic classification. This account discusses the discovery of the pgms, the determination of their atomic weights and their classification.     

Cation-exchange in thiourea-hydrochloric acid solutions

Ion-exchange distribution coefficients are reported for several transition and post-transition elements in solutions of hydrochloric acid (0.1-3.0M) and thiourea on AG50W resins. Some typical elution curves illustrate use of the systems with special reference to the separation of small amounts of gold, palladium, platinum, rhodium and iridium from large amounts of numerous base metals by using 1.5M hydrochloric acid-0.1M thiourea as eluent. Also illustrated is the use of a bromine-containing solution to strip thiourea complexes from a cation-exchange column.     

Determination of microgram amounts of the six platinum-group metals in iron and stony meteorites

Microgram amounts of the 6 platinum-group metals in 5 stony and 3 iron meteorites were determined spectrophotometrically after perchloric acid decomposition and ion-exchange separation. The accuracy of the determinations of osmium, ruthenium and platinum was improved by the use of more sensitive procedures; arsenazo III was used for the determination of palladium in presence of platinum, rhodium and iridium. The data for platinum-group metals thus obtained are compared with published data obtained by neutron activation and spectrographic methods for the same meteorites or for other meteorites of the same class. With a few exceptions, the agreement between the new data and published data is satisfactory.     

Thermostimulated transformations of highly disperse powders of platinum group metals in an argon atmosphere

The behavior of palladium, rhodium, iridium, and platinum powders during their heating in an argon atmosphere was studied by differential scanning calorimetry (DSC). The DSC curves showed the exothermal peaks corresponding to the enlargement of the platinum group metal powders under study. Electron microscopy and XRD studies revealed that the particle size of highly disperse powders changed during the heating. Chemisorbed oxygen was removed from the powder surface above 800 K. During the heating of the mechanical mixture of highly disperse platinum and palladium powders, a solid solution formed with an exothermal effect.     

Polyoxometalates containing late transition and noble metal atoms

This review describes the state of the art in the field of polyoxometalates containing noble metal atoms (ruthenium, rhodium, palladium, silver, osmium, iridium, platinum and gold). The structures of the various species are listed together with their applications (mainly in catalysis).     

Volumetric determination of Pt(IV) in the presence of Ir,Pd, and Rh with ferrous ammonium sulfate in alkaline mannitol medium

A potentiometric reductimetric method for the determination of platinum (Pt(IV)Pt(II)) with a standard Fe(II) solution in an alkaline medium of mannitol is described. The method, the error of which does not exceed 2%, can be used in the presence of palladium, iridium, and rhodium.     

Furan derivatives of group VIII elements (review)

Methods for the synthesis of the furan derivatives of iron, cobalt, nickel, rhodium, palladium, osmium, iridium, and platinum and their physicochemical and chemical properties are reviewed.Latvian Institute of Organic Synthesis, Riga. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 154–179, February, 1997.     

Separation and concentration of some platinum metal ions with a new chelating resin containing thiosemicarbazide as functional group

A new chelating ion-exchange resin containing thiosemicarbazide as functional group and based on macroreticular polystyrene-divinylbenzene (8%) has been prepared. Its sorption characteristics for palladium(II), platinum(IV), rhodium(III), ruthenium(III) and iridium(III) have been studied. These platinum metal ions can be quantitatively separated by sorption on this chelating resin and selective elution. The resin is highly stable in acid and alkaline solution.     

Differential catalytic determination of iridium(IV) and rhodium(III) based on the oxidation of N-methyldiphenylamine-4-sulfonic acid

The kinetics of the oxidation of N-methyldiphenylamine-4-sulfonic acid with periodate ions was studied in weakly acidic solutions in the presence of iridium(IV), rhodium(III), and their mixtures. Oxidation rate constants were determined in the presence of individual catalysts and their mixtures. The synergetic effect of iridium(IV) and rhodium(III) on the rate of the indicator reaction was estimated; the range of catalyst ratios for the simultaneous determination of analytes was determined. The effect of some factors (oxidant nature and concentration, temperature, the ionic strength of solution, and interfering ions) on the rate of the indicator reaction in the presence of iridium(IV) and rhodium(III) mixtures was assessed. A procedure for the differential catalytic determination of iridium(IV) and rhodium(III) was proposed and tested in the analysis of artificial mixtures and a platinum concentrate of complex composition (KP-5).