Synthesis and Transformation of Methyl 2‐(6‐Hydroxy‐2‐phenylpyrimidin‐4‐yl)acetate: Simple Preparation of Pyrimidines with Heterocyclic Substituents

A simple and efficient synthesis of four new substituted pyrimidines, compounds 9a – d , from the title compound 3 is described. Conversion of 3 to methyl (E)‐3‐(dimethylamino)‐2‐(6‐methoxy‐2‐phenylpyrimidin‐4‐yl)prop‐2‐enoate ( 4 ), followed by condensation with various dinucleophiles according to the ‘enaminone methodology’, afforded the target compounds 9 in medium‐to‐good yields.     

A New Synthesis of Ciliapterin and Dictyopterin. Ene Reactions of (Alkenylamino)‐nitroso‐pyrimidines

A comparison of the reactivity of (acylamino)‐nitroso‐pyrimidines 1 and the alkenylamino analogue 17 in intramolecular ene reactions showed the considerably lower reactivity of 17 , leading to the pteridine 18 . Pteridin‐7‐one 11 resulting from 1 (R¹=OBn, R²=Me) was transformed into 4‐(benzyloxy)‐6‐[(E)‐prop‐1‐enyl]pteridin‐2‐amine ( 13 ) by O‐triflation, followed by reduction with LiBHEt₃, while the 4‐MeO analogue 18 was prepared by spontaneous oxidation of the initial ene product of 17 . The (alkenylamino)‐nitroso‐pyrimidine 17 was synthesized by substitution of the dimethoxy‐nitroso‐pyrimidine 16 with the allylamine 15 . Ciliapterin ( 5 ) and dictyopterin ( 7 ) were synthesized from pteridine 18 by a Sharpless asymmetric dihydroxylation.     

Stereoselective Preparation of 3‐Amino‐2‐fluoro Carboxylic Acid Derivatives,and Their Incorporation in Tetrahydropyrimidin‐4(1H)‐ones,and in Open‐Chain and Cyclic β‐Peptides

The preparation of (2S,3S)‐ and (2R,3S)‐2‐fluoro and of (3S)‐2,2‐difluoro‐3‐amino carboxylic acid derivatives, 1 – 3 , from alanine, valine, leucine, threonine, and β³h‐alanine (Schemes 1 and 2, Table) is described. The stereochemical course of (diethylamino)sulfur trifluoride (DAST) reactions with N,N‐dibenzyl‐2‐amino‐3‐hydroxy and 3‐amino‐2‐hydroxy carboxylic acid esters is discussed (Fig. 1). The fluoro‐β‐amino acid residues have been incorporated into pyrimidinones ( 11 – 13 ; Fig. 2) and into cyclic β‐tri‐ and β‐tetrapeptides 17 – 19 and 21 – 23 (Scheme 3) with rigid skeletons, so that reliable structural data (bond lengths, bond angles, and Karplus parameters) can be obtained. β‐Hexapeptides Boc[(2S)‐β³hXaa(αF)]₆OBn and Boc[β³hXaa(α,αF₂)]₆‐OBn, 24 – 26 , with the side chains of Ala, Val, and Leu, have been synthesized (Scheme 4), and their CD spectra (Fig. 3) are discussed. Most compounds and many intermediates are fully characterized by IR‐ and ¹H‐, ¹³C‐ and ¹⁹F‐NMR spectroscopy, by MS spectrometry, and by elemental analyses, [α]_D and melting‐point values.     

A New Synthesis of Pteridines Substituted with Branched and Linear Alkenyl Groups at C(6). The Nitroso‐Ene Reaction of 4‐(Alkenoylamino)‐5‐nitrosopyrimidines

Pteridines substituted with a 1,1‐, 1,2‐, or 1,1,3‐substituted alkenyl group (mostly (E)‐configured) at C(6) were synthesized in high yields by the intramolecular nitroso‐ene reaction of 4‐(alkenoylamino)‐2‐amino‐6‐benzyloxy‐5‐nitroso‐ and 4‐(alkenoylamino)‐2,6‐diamino‐5‐nitrosopyrimidines. Thus, the N‐alkenoyl nitrosopyrimidines 4 and 5 provided the pteridines 6 and 7 , respectively, characterized by a 1,2‐disubstituted (E)‐alkenyl substituent, the C(4)‐(E)‐geranoyl amide 13 led regio‐ and stereoselectively to the (E)‐1,1,2‐trisubstituted alkenyl‐pteridine 16 , and the C(4)‐(Z) isomer 14 led to 17 possessing a 1,1‐disubstituted alkenyl group. The trifluoromethylated butenoyl amide 15 possessing a less highly nucleophilic alkenoyl group reacted more slowly to give the trifluoromethylated vinylpteridine 18 . Also the 4‐(alkenoylamino)‐2,6‐diamino‐5‐nitrosopyrimidine 20 reacted more slowly than 4 and 5 , and provided the pteridines 23 ; introduction of additional N‐acyl groups as in 21 and 22 led to a considerably faster ene reaction. The X‐ray crystal structure analysis of the nitroso amide 15 shows eight symmetrically independent molecules in the unit cell. In the crystalline state, the N,N‐dimethylformamidine derivative 9 of 6 forms a centrosymmetric dimer with the 7,8‐lactam group connected by intermolecular hydrogen bonds.     

Diels–Alder Additions,Ene Reactions,and Condensations of 4‐(Acylamino)‐5‐nitrosopyrimidines – Synthesis of 8‐Substituted Guanines and of 6‐Substituted Pteridinones

4‐(Acylamino)‐5‐nitrosopyrimidines react either by a reductive condensation to provide 8‐substituted guanines, or by a Diels–Alder cycloaddition, or an ene reaction, to provide 6‐substituted pteridinones, depending on the nature of the acyl group and the reaction conditions. Experimental details are provided for the transformation of (acylamino)‐nitrosopyrimidines to 8‐substituted guanines, and the scope of the reaction is further demonstrated by transforming the trifluoro acetamide 25 to the 8‐(trifluoromethyl)guanine ( 27 ), and the N,N′‐bis(nitrosopyrimidinyl)‐dicarboxamide 29 to the (R,R)‐1,2‐di(guan‐8‐yl)ethane‐1,2‐diol ( 32 ). An intramolecular Diels–Alder reaction of the N‐sorbyl (=N‐hexa‐2,4‐dienoyl) nitrosopyrimidine 10 , followed by a spontaneous elimination to cleave the N,O bond of the initial cycloaddition product provided the pteridinones 14 or 15 , characterized by a (Z)‐ or (E)‐3‐hydroxyprop‐1‐enyl group at C(6). Treatment of 10 with Ph₃P led to the C(8)‐penta‐1,3‐dienyl‐guanine 18 . The ene reaction of the N‐crotonyl (=N‐but‐2‐enoyl) nitrosopyrimidine 19 provided the 6‐vinyl‐pteridinone 20a that dimerized readily to 21a , while treatment of 19 with Ph₃P led in high yield to 8‐(prop‐1‐enyl)guanine ( 23 ). The structure of the dimer 21 was established by X‐ray analysis of its bis(N,N‐dimethylformamidine) derivative 21b . The crystal structure of the nitroso amide 10 is characterized by two molecules in the centrosymmetric unit cell. Intermolecular H‐bonds connect the amino group to the amide carbonyl and to N(1). The crystalline bis(purine) 30 forms a left‐handed helix with four molecules per turn and a pitch of 30.2 Å.     

Synthesis and Herbicidal Activity of Novel N‐(2‐Fluoro‐5(3‐methyl‐2,6‐dioxo‐4‐(trifluoromethyl)‐2,3‐dihydro‐pyrimidin‐1(6H)‐yl)phenyl)‐2‐phenoxyacetamide Derivatives

Thirteen novel N‐(2‐fluoro‐5‐(3‐methyl‐2,6‐dioxo‐4‐(trifluoromethyl)‐2,3‐dihydropyrimidin‐1(6H)‐yl)phenyl)‐2‐phenoxy)acetamides were designed and synthesized utilizing 4‐fluoro‐aniline and ethyl 3‐amino‐4,4,4‐trifluoro‐but‐2‐enoate as starting materials. The chemical structures of all compounds were confirmed by ¹H NMR, IR, mass spectrum and elemental analyses. Subsequently, the herbicidal activities of the as‐prepared compounds were evaluated in the greenhouse. Bioassay results indicated that most of compounds had better herbicidal activities against dicotyledonous weeds. Among all the tested compounds, compounds 4a – 4i showed good herbicidal activities at both pre‐emergence and post‐emergence treatment against two or three kinds of dicotyledonous weeds, such as Abutilon theophrasti Medic, Amaranthus ascendens L, and Chenopodium album L at the dosage of 75 g ai/ha.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

A Convenient Synthesis of 2,3‐Dihydro‐3‐methylidene‐1H‐isoindol‐1‐ones by Reaction of 2‐Formylbenzo­nitriles with Dimethyloxosulfonium Methylide

A facile method for the synthesis of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one and its derivatives carrying substituent(s) at C(5) and/or C(6) has been developed. The reaction of 2‐formylbenzonitrile ( 1a ) with dimethyloxosulfonium methylide, generated by the treatment of trimethylsulfoxonium iodide with NaH in DMSO/THF at 0°, resulted in the formation of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one ( 2a ) in 77% yield. Similarly, six 2‐formylbenzonitriles carrying substituent(s) at C(4) and/or C(5), i.e., 1b – 1g , also gave the corresponding expected products 2b – 2g in comparable yields.     

Synthesis of Some Novel Pyrido[2,3‐d]pyrimidine and Pyrido[3,2‐e][1,3,4]triazolo and Tetrazolo[1,5‐c]pyrimidine Derivatives as Potential Antimicrobial and Anticancer Agents

A novel series of pyrido[2,3‐d]pyrimidines 3a – d , 4a – d , 5a – d , 6a – d , and 7a – d ; pyrido[3,2‐e][1,3,4]triazolo; and tetrazolo[1,5‐c]pyrimidines 10a – d and 11a – d was synthesized through different chemical reactions starting from 2‐amino‐3‐cyano‐4,6‐diarylpyridines. The newly synthesized heterocycles were characterized by elemental analysis, IR, ¹H‐NMR, ¹³C‐NMR, and mass spectral data. Compounds have been screened for their antibacterial and antifungal activities. The data showed that the presence of electron‐donating group such as p‐methoxyphenyl increases the antimicrobial activity. Also, the compounds have shown anticancer activity for colon and liver cancer cells.     

Microwave‐Assisted Synthesis of Novel 2,4‐Dihydro‐5‐[4‐(trifluoromethyl)phenyl]‐3H‐1,2,4‐triazol‐3‐ones and Potentiometric Determination of Their pKa in Nonaqueous Solvents

The novel 4‐amino‐ or 4‐aryl‐substituted 2,4‐dihydro‐5‐[(4‐trifluoromethyl)phenyl]‐3H‐1,2,4‐triazol‐3‐ones 3a – 3g were synthesized by reaction of N‐(ethoxycarbonyl)‐4‐(trifluoromethyl)benzenehydrazonic acid ethyl ester ( 2 ) and primary amines or hydrazine by microwave irradiation. Compounds 3a – 3g were potentiometrically titrated with tetrabutylammonium hydroxide (Bu₄NOH) in four nonaqueous solvents, i.e., ⁱPrOH, ^tBuOH, MeCN, and N,N‐dimethylformamide (DMF). Also half‐neutralization potential values and the corresponding pK_a values were determined in all cases.     

Efficient One‐Pot Synthesis of Alkyl 2‐(Dialkylamino)‐4‐phenylthiazole‐5‐carboxylates and Single‐Crystal X‐Ray Structure of Methyl 2‐(Diisopropylamino)‐4‐phenylthiazole‐5‐carboxylate

The reaction between secondary amines, benzoyl isothiocyanate, and dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates) in the presence of silica gel (SiO₂) led to alkyl 2‐(dialkylamino)‐4‐phenylthiazole‐5‐carboxylates in fairly high yields. The structures of the products were confirmed by their IR, ¹H‐ and ¹³C‐NMR, and mass spectra, and by a single‐crystal X‐ray structure determination.     

Synthesis of Racemic Δ3‐2‐Hydroxybakuchiol and Its Analogues

The first synthetic approach to (±)‐Δ³‐2‐hydroxybakuchiol (=4‐[(1E,5E)‐3‐ethenyl‐7‐hydroxy‐3,7‐dimethylocta‐1,5‐dien‐1‐yl]phenol; 14 ) and its analogues 13a – 13f was developed by 12 steps (Schemes 2 and 3). The key features of the approach are the construction of the quaternary C‐center bearing the ethenyl group by a Johnson–Claisen rearrangement (→ 6 ); and of an (E)‐alkenyl iodide via a Takai–Utimoto reaction (→ 11 ); and an arylation via a Negishi cross‐coupling reaction (→ 12e – 12f ).     

A Novel Route to 1‐Substituted 3‐(Dialkylamino)‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles

Heptalenecarbaldehydes 1 / 1′ as well as aromatic aldehydes react with 3‐(dicyanomethylidene)‐indan‐1‐one in boiling EtOH and in the presence of secondary amines to yield 3‐(dialkylamino)‐1,2‐dihydro‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles (Schemes 2 and 4, and Fig. 1). The 1,2‐dihydro forms can be dehydrogenated easily with KMnO₄ in acetone at 0° (Scheme 3) or chloranil (=2,3,5,6‐tetrachlorocyclohexa‐2,5‐diene‐1,4‐dione) in a ‘one‐pot’ reaction in dioxane at ambient temperature (Table 1). The structures of the indeno[2,1‐c]pyridine‐4‐carbonitriles 5′ and 6a have been verified by X‐ray crystal‐structure analyses (Fig. 2 and 4). The inherent merocyanine system of the dihydro forms results in a broad absorption band in the range of 515–530 nm in their UV/VIS spectra (Table 2 and Fig. 3). The dehydrogenated compounds 5, 5′ , and 7a – 7f exhibit their longest‐wavelength absorption maximum at ca. 380 nm (Table 2). In contrast to 5 and 5′, 7a – 7f in solution exhibit a blue‐green fluorescence with emission bands at around 460 and 480 nm (Table 4 and Fig. 5).     

On the Reaction of Thiazole‐2,4‐diamines with Isothiocyanates – Preparation and Transformation of 2,4‐Diaminothiazole‐5‐carbothioamides

In the reaction of thiazole‐2,4‐diamines 8 with isothiocyanates 1 , 2,4‐diaminothiazole‐5‐carbothioamides 9, 10, 18 , and 19 as well as thiazolo[4,5‐d]pyrimidine‐7(6H)‐thiones 21 were formed. The carbothioamides 9, 10 , and 18 were transformed by reaction with different types of monofunctional and bifunctional electrophiles into hitherto unknown acceptor‐substituted 4,4′‐([2,5′‐bithiazole]‐2′,4′‐diyl)bis[morpholines] 24 and 29 , the 2′,4′‐bis(dialkylamino)[2,5′‐bithiazol]‐4‐(5H)‐ones 30 , and the 4‐substituted 2′,4′‐bis(dialkylamino)‐2,5′‐bithiazoles 31 . From 30 and 31 new 4‐mono‐ or 4,5‐disubstituted 2′,4′‐bis(dialkylamino)‐2,5′‐bithiazoles 34, 35, 38 , and 39 as well as 5‐substituted 2′,4′‐bis(dialkylamino)[2,5′‐bithiazol]‐4(5H)‐ones 33, 36 , and 37 were prepared.     

Synthesis and Characterization of (–)‐Menthyl Containing N‐Alkyl Cycloimmonium Salts

The reaction of 4‐phenyl‐2‐aminothiazole or 2‐amino pyridine with α‐bromo acetic (–)‐menthyl ester ( 2c ) yields new N‐alkyl cycloimmonium bromides ( 1c , 3 ) with the chiral (–)‐menthyl substituent, which were isolated and fully characterized by ¹H and ¹³C NMR spectroscopy for the first time. In addition, starting from 4‐phenyl‐2‐aminothiazole, two further N‐alkyl cycloimmonium bromides ( 1a , 1b ) were prepared. The molecular and crystal structures of all three thiazole derived N‐alkyl cycloimmonium bromides ( 1a – c ) were determined by single‐crystal X‐ray diffraction. In all cases the crystal structures are dominated by N–H ··· Br hydrogen bonds, which results in the formation of an extensive hydrogen bonded network in the crystal. Interestingly, in all structures S ··· Br^– distances shorter than the sum of the van der Waals radii are observed.     

Transformations of Methyl 2‐[(E)‐2‐(Dimethylamino)‐1‐(methoxycarbonyl)ethenyl]‐1‐methyl‐1H‐indole‐3‐carboxylate

A simple and efficient synthesis of novel 2‐heteroaryl‐substituted 1H‐indole‐2‐carboxylates and γ‐carbolines, compounds 1 – 3 , from methyl 2‐(2‐methoxy‐2‐oxoethyl)‐1‐methyl‐1H‐indole‐3‐carboxylate ( 4 ) by the enaminone methodology is presented.     

Synthesis of Derivatives of the Optically Active β‐Amino Acids from (+)‐Car‐2‐ene

The reaction of (+)‐car‐2‐ene ( 4 ) with chlorosulfonyl isocyanate (=sulfuryl chloride isocyanate; ClSO₂NCO) led to the tricyclic lactams 6 and 8 corresponding to the initial formation both of the tertiary carbenium and α‐cyclopropylcarbenium ions (Scheme 2). A number of optically active derivatives of β‐amino acids which are promising compounds for further use in asymmetric synthesis were synthesized from the lactams (see 16, 17 , and 19 – 21 in Scheme 3).     

Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

Synthesis and Structure of Low‐valent η4‐Cinnamaldehyde Cobalt Complexes

Three η⁴‐(C=C–C=O) coordination cobalt(I) complexes 1 – 3 were synthesized by the reactions of cinnamaldehyde, p‐fluorocinnamaldehyde, and p‐chlorocinnamaldehyde with CoMe(PMe₃)₄. Complex 4 as η²‐(C=C) coordination was prepared by the reaction of chalcone with Co(PMe₃)₄. The structures of complexes 1 – 4 were confirmed by single‐crystal X‐ray diffraction. Although the reactions didn't undergo C–H bond activation and decarbonylation, the formation of complexes 1 – 4 deepens our understanding of the reactions between α,β‐unsaturated aldehyde or ketone with low‐valent central cobalt atom.     

Synthesis and properties of fluorinated polyimides based on 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene and various aromatic dianhydrides

A novel fluorinated diamine monomer, 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene ( 2 ), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride and 2,5‐di‐tert‐butylhydroquinone in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Fluorinated polyimides ( 5a – 5f ) were synthesized from diamine 2 and various aromatic dianhydrides ( 3a – 3f ) via thermal or chemical imidization. These polymers had inherent viscosities of 0.77–1.01 dL/g. The 5 series polyimides were soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, and N,N‐dimethylformamide and were even soluble in dioxane, tetrahydrofuran, and dichloromethane. 5 (C) showed cutoff wavelengths between 363 and 404 nm and yellowness index (b*) values of 6.5–40.2. The polyimide films had tensile strengths of 93–114 MPa, elongations to break of 9–12%, and initial moduli of 1.7–2.1 GPa. The glass‐transition temperatures were 255–288 °C. The temperatures of 10% weight loss were all above 460 °C in air or nitrogen atmospheres. In comparison with a nonfluorinated polyimide series based on 1,4‐bis(4‐aminophenoxy)‐2,5‐di‐tert‐butylbenzene, the 5 series showed better solubility and lower color intensity, dielectric constants, and moisture absorption. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2272–2284, 2004