Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

N,N,N′,N′‐Tetraalkylaminoazoxybenzene Derivatives; Convenient Synthesis and Mechanistic Study

N,N,N′,N′‐tetraalkyaminoazoxybenzene derivatives were conveniently prepared by the coupling of N,N‐dialkylnitrosoaniline in the presence of acetone and KOH. The reaction mechanism was proposed and investigated, and the structure of compound 3b was also confirmed by single crystal X‐ray diffractometry.     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

Masking of Lewis acidity trends in the solid‐state structures of trichlorido‐ and tribromido(2,2′:6′,2′′‐terpyridine‐κ3N,N′,N′′)gallium(III)

The molecular structures of trichlorido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaCl₃(C₁₅H₁₁N₃)], and tribromido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaBr₃(C₁₅H₁₁N₃)], are isostructural, with the Ga^III atom displaying an octahedral geometry. It is shown that the Ga—N distances in the two complexes are the same within experimental error, in contrast to expected bond lengthening in the bromide complex due to the lower Lewis acidity of GaBr₃. Thus, masking of the Lewis acidity trends in the solid state is observed not only for complexes of group 13 metal halides with monodentate ligands but for complexes with the polydentate 2,2′:6′,2′′‐terpyridine donor as well.     

Structural and theoretical characterization of a new twisted 4′‐substituted terpyridine compound: 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine

4′‐Substituted derivatives of 2,2′:6′,2′′‐terpyridine with N‐containing heteroaromatic substituents, such as pyridyl groups, might be able to coordinate metal centres through the extra N‐donor atom, in addition to the chelating terpyridine N atoms. The incorporation of these peripheral N‐donor sites would also allow for the diversification of the types of noncovalent interactions present, such as hydrogen bonding and π–π stacking. The title compound, C₂₄H₁₆N₄, consists of a 2,2′:6′,2′′‐terpyridine nucleus (tpy), with a pendant isoquinoline group (isq) bound at the central pyridine (py) ring. The tpy nucleus deviates slightly from planarity, with interplanar angles between the lateral and central py rings in the range 2.24 (7)–7.90 (7)°, while the isq group is rotated significantly [by 46.57 (6)°] out of this planar scheme, associated with a short H_tpy…H_isq contact of 2.32 Å. There are no strong noncovalent interactions in the structure, the main ones being of the π–π and C—H…π types, giving rise to columnar arrays along [001], further linked by C—H…N hydrogen bonds into a three‐dimensional supramolecular structure. An Atoms In Molecules (AIM) analysis of the noncovalent interactions provided illuminating results, and while confirming the bonding character for all those interactions unquestionable from a geometrical point of view, it also provided answers for some cases where geometric parameters are not informative, in particular, the short H_tpy…H_isq contact of 2.32 Å to which AIM ascribed an attractive character.     

Poly(ethylene terephthalate) reinforced by N,N′‐diphenyl biphenyl‐3,3′,4,4′‐tetracarboxydiimide moieties

Starting with 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and methyl aminobenzoate, we synthesized a novel rodlike imide‐containing monomer, N,N′‐bis[p‐(methoxy carbonyl) phenyl]‐biphenyl‐3,3′,4,4′‐tetracarboxydiimide (BMBI). The polycondensation of BMBI with dimethyl terephthalate and ethylene glycol yielded a series of copoly(ester imide)s based on the BMBI‐modified poly(ethylene terephthalate) (PET) backbone. Compared with PET, these BMBI‐modified polyesters had higher glass‐transition temperatures and higher stiffness and strength. In particular, the poly(ethylene terephthalate imide) PETI‐5, which contained 5 mol % of the imide moieties, had a glass‐transition temperature of 89.9 °C (11 °C higher than the glass‐transition temperature of PET), a tensile modulus of 869.4 MPa (20.2 % higher than that of PET), and a tensile strength of 80.8 MPa (38.8 % higher than that of PET). Therefore, a significant reinforcing effect was observed in these imide‐modified polyesters, and a new approach to higher property polyesters was suggested. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 852–863, 2002; DOI 10.1002/pola.10169     

Copper(II) Complexes with N‐(9‐anthracenyl)‐N′‐(3‐pyridyl)urea (L) and a Derivative of L: Synthesis,Structure, and Fluorescent Properties

Three copper(II) complexes, [Cu₂(OAc)₄L₂] · 2CH₃OH ( 1 ), [CuBr₂L′₂(CH₃OH)] · CH₃OH ( 2a ), and [CuBr₂L′₂(DMSO)] · 0.5CH₃OH ( 2b ) {L = N‐(9‐anthracenyl)‐N′‐(3‐pyridyl)urea and L′ = N‐[10‐(10‐methoxy‐anthronyl)]‐N′‐(3‐pyridyl)urea} have been synthesized by the reaction of L with the corresponding copper(II) salts. Complex 1 shows a dinuclear structure with a conventional “paddlewheel” motif, in which four acetate units bridge the two Cu^II ions. In complexes 2a and 2b , the anthracenyl ligand L has been converted to an anthronyl derivative L′, and the central metal ion exhibits a distorted square pyramidal arrangement, with two pyridyl nitrogen atoms and two bromide ions defining the basal plane and the apical position is occupied by a solvent molecule (CH₃OH in 2a and DMSO in 2b ).     

Tetra(N,N′‐tetramethylharnstoff)‐Beryllium‐Triiodid, [Be(TMH)4](I3)2

Tetra(N,N′‐tetramethylurea)‐beryllium‐triiodide, [Be(TMU)₄](I₃)₂ ( 1 ) was prepared from beryllium powder and iodine in N,N′‐tetramethylurea to give orange crystals, which were characterized by X‐ray diffraction and IR spectroscopy. Compound 1 crystallizes monoclinically in the space group C2/c with four formula units per unit cell. Lattice dimensions at 100(2) K: a = 1906.6(1), b = 1185.7(1), c = 1895.0(1) pm, β = 113.60(1) °, R₁ = 0.0291. The structure of 1 consists of distorted tetrahedral cations [Be(TMU)₄]²⁺ with Be–O bond lengths of 162.5(5) and 160.8(5) pm and triiodide ions without site symmetry.     

Synthesis and biological activity of novel N‐benzoyl‐N‐tert‐butyl‐N′‐(β‐triphenylgermyl)propionylhydrazines

A series of new N‐benzoyl‐N‐tert‐butyl‐N′‐(β‐triphenylgermyl)propionylhydrazines were synthesized by the condensation reaction of β‐triphenylgermyl propanoic acid with N‐benzoyl‐N‐tert‐butylhydrazines in good yields by using N,N′‐dicyclohexylcorbodiimide as dehydrating agent. These title compounds were evaluated for molting hormone mimicking activity. The results of bioassay showed that the compounds exhibit moderate larvicidal activity, and toxicity assays indicated that the title compounds can induce a premature, abnormal and lethal larval molt. We found that the title compounds possess potential anticancer activities in vitro. Copyright © 2002 John Wiley & Sons, Ltd.     

Asymmetric Diels–Alder and Inverse‐Electron‐Demand Hetero‐Diels–Alder Reactions of β,γ‐Unsaturated α‐Ketoesters with Cyclopentadiene Catalyzed by N,N′‐Dioxide Copper(II) Complex

Highly enantioselective Diels–Alder (DA) and inverse‐electron‐demand hetero‐Diels–Alder (HDA) reactions of β,γ‐unsaturated α‐ketoesters with cyclopentadiene catalyzed by chiral N,N′‐dioxide–Cu(OTf)₂ (Tf=triflate) complexes have been developed. Quantitative conversion of β,γ‐unsaturated α‐ketoesters and excellent diastereoselectivities (up to 99:1) and enantioselectivities (up to >99 % ee) were observed for a broad range of substrates. Both aromatic and aliphatic β,γ‐unsaturated α‐ketoesters were found to be suitable substrates for the reactions. Moreover, the chemoselectivity of the DA and HDA adducts were improved by regulating the reaction temperature. Good to high chemoselectivity (up to 94 %) of the DA adducts were obtained at room temperature, and moderate chemoselectivity (up to 65 %) of the HDA adducts were achieved at low temperature. The reaction also featured mild reaction conditions, a simple procedure, and remarkably low catalyst loading (0.1–1.5 mol %). A strong positive nonlinear effect was observed.     

Interaction of Bovine Serum Albumin with N‐(4‐Ethoxyphenyl)‐N′‐(4‐Antipyrinyl)Thiourea (EPAT) Using Spectroscopies

The interaction between N‐(4‐ethoxyphenyl)‐N′‐(4‐antipyrinyl)thiourea (EPAT) and bovine serum albumin (BSA) was studied by fluorescence spectroscopy in combination with UV absorption spectroscopy. The intrinsic fluorescence of bovine serum albumin was quenched by EPAT through a static quenching procedure. The binding constants of EPAT with BSA were estimated according to the fluorescence quenching results at different temperatures. The thermodynamic parameters: enthalpy change (ΔH) and entropy change (ΔS) were calculated to be ?10.69 kJ/mol and 42.64 J·mol^?1·K^?1 according to thermodynamic equations, respectively, and indicating that the binding force was suggested to be mainly a hydrophobic force. The effect of common ions on the binding constant was also investigated. A new fluorescence spectroscopy assay of the proteins was presented in this paper. The determination results of the proteins in bovine serum by means of this method were very close to those obtained using Coomassie Brilliant Blue G‐250 colorimetry.     

N,N′‐Bis(arylmethylidene)arylmethanediamines: Suitable Precursors for the Synthesis of 1‐Pyrroline Derivatives

A simple and appropriate procedure for the synthesis of 4,5‐dihydro‐5‐hydroxy‐3H‐pyrrole‐3,3‐dicarbonitrile derivatives is reported. The advantages of this method are one‐pot conditions, high yield of products, short reaction times, and no need of metal catalyst. The structures are confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

Spectroscopic studies of interactions in poly(N‐acryloyl‐N′‐methylpiperazine)/acidic polymer complexes

Poly(N‐acryloyl‐N′‐methylpiperazine) (PAMP) forms complexes with four strong acidic polymers, namely, poly(styrenesulfonic acid), poly(vinylphosphonic acid), poly(acrylic acid) and poly(methacrylic acid) in ethanol/water (1:1) solution. The nature of interpolymer interactions in various complexes was studied by Fourier transform infrared (FTIR) spectroscopy and X‐ray photoelectron spectroscopy (XPS). Both the carbonyl oxygen and the amide nitrogen of PAMP are involved in hydrogen‐bonding interactions. Some of the amine nitrogens of PAMP are protonated and therefore PAMP also interacts with the acidic polymers through ionic interactions. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 501–508, 2000     

Determination of Solvatochromic Regression Coefficients for the Molybdenum(VI) Complex with Ethylenediamine‐N,N′‐diacetic Acid by Using Kamlet‐Abboud‐Taft Equation

The Solver, Microsoft Excel 2000 powerful optimization package, has been used to perform non‐linear least‐squares curve fitting on the basis of Gauss‐Newton method for the calculation of solvatochromic regression coefficients for the complexation of molybdenum(VI) with ethylenediamine‐N,N′‐diacetic acid and dissociation constants at 25°C and constant ionic strength 0.1 mol·L⁻¹ sodium perchlorate in different aqueous solutions of methanol. A combination of potentiometric and UV spectrophotometric methods have been used for experimental studies. Non specific and specific solute‐solvent interactions were interpreted by correlating the equilibrium data with solvent parameters using the Kamlet‐Abboud‐Taft solvatochromic equation. Finally the influence of the solvent on the stability of the complex was discussed on the basis of the correlation results and the contribution of α (hydrogen‐bond donor acidity), β (hydrogen‐bond acceptor basicity) and π* (dipolarity/polarizability) parameters.