A Rapid and Simple High Pressure Liquid Chromatographic Method for Pharmacokinetic Study of Ciprofloxacin in Human Serum

Abstract

A rapid, accurate and sensitive method has been developed for the quantitative determination of ciprofloxacin, a new second-generation quinolone carboxylic acid antimicrobial agent, with high in vitro activity against a wide range of Gram- negative pathogens and Gram-positive cocci.

A Lichrosorb RP-18 250 x 4.0 mm, 5 μm analytical column was used with an eluting system consisting of a mixture of CH₃CN-CH₃OH-Citric acid 0.4 M (1:3:6 v/v). Detection was performed with a variable wavelength UV-visible detector at 275 nm resulting in a limit of detection of 0.2 ng per 20 μl injection. For the quantitative determination theophylline was used as chromatographic internal standard at a concentration of 1.56 ng/μl. A rectilinear relationship was observed up to 20 ng/μl. Analysis time was less than 6 min. The statistical evaluation of the method was examined performing intra-day (n=8) and inter-day calibration (n=8) and was found to be satisfactory with highly accurate and precise results. The method was applied to the direct determination of ciprofloxacin in human blood serum. Sample pretreatment involved only protein precipitation with acetonitrile. Recovery of ciprofloxacin in spiked samples was 98 ± 4% over the range of 0.5–5 mg/μl.     

Highly cis‐1,4 selective polymerization of isoprene promoted by α‐diimine cobalt(II) chlorides

A series of 1,2‐bis(arylimino)acenaphthylenes ( L1 – L5 ) was synthesized and reacted with CoCl₂ to afford the corresponding cobalt complexes LCoCl₂ ( C1 – C5 ). All cobalt complexes have been fully characterized and in the case of C1 by single crystal X‐ray diffraction; its molecular structure reveals a distorted tetrahedral geometry. On activation with AlEtCl₂, C1 – C5 efficiently polymerize isoprene to give polyisoprenes (PIs) with high contents of cis‐1,4 units (between 90% and 94%). The influence of reaction temperature and [Al]/[Co] molar ratio on both catalytic performance and the microstructural properties of the PIs is investigated. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3609–3615.     

Liquid chromatographic determination of chelates of cobalt (II), copper (II) and iron (II) with 2-thiophonaldehyde-4-phenyl-3-thiosemicarbazone

Summary A new chelating reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) has been examined for high performance liquid chromatographic (HPLC) separations of cobalt (II), copper(II) and iron (II) or cobalt (II), nickel (II), iron (II), copper (II) and mercury (II) as metal chelates on a C₁₈, 5μm column (250×4 mm i.d.) The chelates were eluted isocratically with methanol: acetonitrile: water containing sodium acetate and tetrabutylammonium bromide (TBA), and detected at 254 nm. A solvent extraction procedure was developed for simultaneous determination of the metals with detection limits within 0.02–2.5 μ g.mL⁻¹. The method was applied to the determination of copper, cobalt and iron in natural waters.     

Spectrophotometric studies on complexation reactions of some water-soluble 5-nitro-2-pyridylhydrazones with cobalt. Spectrophotometric and derivative spectrophotometric determination of trace cobalt with 2-benzimidazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone

The complexation reactions of four water-soluble hydrazones, 2-quinolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone, 3-sulphophenyl-2-thiazolylmethanone 5-nitro-2-pyridylhydrazone (STNPH), 2-benzothiazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone and 2-benzimidazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone (BISNPH), with cobalt(II) were studied spectrophotometrically. These hydrazones react with cobalt(II) to form stable 1:2 (metal:ligand) complexes, except for STNPH, which forms a 1:1 complex, with high molar absorptivities. A sensitive and selective spectrophotometric method for the determination of cobalt with BISNPH has been developed. The cobalt(II)-BISNPH complex is formed quantitatively in the pH range 2.7–9.4 and oxidized rapidly to give the corresponding cobalt(III) complex with an absorption maximum at 517 nm. Beer's law is obeyed over the range 0.02–1.0 μg ml^?1 and the apparent molar absorptivity of the cobalt(III) complex is 6.65 × 10⁴ l mol^?1 cm^?1 at 517 nm. The method was applied to the determination of cobalt in iron and steel samples with satisfactory results. The sensitivity is increased 11-fold by use of second-derivative spectrophotometry.     

Determination of Total Selenium in Human Urine and Serum by Graphite-Furnace Atomic-Absorption Spectrophotometry with Palladium-Nickel-Ammonium Nitrates as a Matrix Modifier

After human urine or serum was diluted (1 + 9) with HNO₃ (0.2%, v/v) and standard additions of Se solution (100 μ L^?1), the diluted sample (10 μL) was introduced into the graphite cuvette. The matrix modifier [10μL, containing Pd (0.6 μg) + Ni (25 μg) + NH₄NO₃ (80 μg) in HNO₃ (0.2%, v/v) for urine, or Pd (0.3 μg) + Ni (30 μg) + NH₄NO₃ (80 μg) + Triton X-100 (0.04%) in HNO₃ (0.2%, v/v) for serum, respectively] was added and the mixture was heated according to a temperature program. The matrix modifier containing NH₄NO₃ in a suitable amount and a small amount of Pd enhanced the sensitivity for Se. The method detection limits (3σ) after dilution were about 4.9 ± 0.8 and 2.36 ± 0.18 μg L^?1 for urine and serum, respectively. The accuracy of this method was tested with SRM #2670 human urine Se and Seronorm Trace Elements #116 human serum Se, respectively, and the results of 97.6 – 101% and 100 – 104% were obtained with precision ± 0.3% and ± 2%, respectively. This method can be applied easily and accurately to the determination of concentration of total Se in human urine and serum.     

A potentiometric study of the oxidation of cobalt(II) with gold(III) chloride in presence of 1,10 phenanthroline or 2,2'-bipyridine : A new titration of cobalt (II) and its application to nickel-base alloys

The redox reaction between cobalt(II) and gold(III) chloride in the presence of 1.10-phenanthroline or 2,2'-bipyridine was studied, and a titration of the cobalt(II) complex with a gold(III) chloride solution was developed. A 4-fold amount of 1,10-phenanthroline or 2,2'-bipyridine was necessary for rapid quantitative reaction; the permissible pH range was 1.5–5. The oxidation of the cobalt(II) complex proceeds rapidly at 40–50°C, and a direct potentiometric titration was possible. The following maximum errors were obtained: 3.3% for 0.2–1.0 mg Co, 2.0% for 1–5 mg Co, and 0.70% for 10–40 mg Co. The following ions did not interfere: Ni(II), Zn(II), Pb(II), Cd(II), Mn(II), Fe(II), Cr(III), Al(III), Th(IV), Se(IV), Ti(IV), U(VI), Mo(VI), SO^2-₄ and PO^3-₄. Even small quantities of silver(I), copper(II), palladium(II), mercury(II)and iron(III) interfered. The method was applied to the determination of high cobalt contents in high-temperature nickel-base alloys.     

Utility of 5-Diazo-1,2,4- Triazol-3-Carboxylic Acid for Colorimetric Determination of Certain 8-Hydroxyquinolines

Abstract

A colorimetric method for the determination of certain 8-hydroxyquinolines has been developed. The method is based on the coupling of 8-quinolinols with diazotriazole carboxylic acid in the presence of sodium carbonate (0.5% w/v) at ambient temperature (around 30°C). The resulting azo dyes are stable and give intense absorption in the range of 486–540 nm. Beer's law is valid in the concentration ranges of 1 – 8, 2.5 – 17.5, 5 – 35, 2 – 20, and 2 – 20 mcg/ml for 8-hydroxyquinoline (HQ), 5,7-diiodo-8-hydroxyquinoline (DIQ), 5,7-dibromo-8-hydroxyquinoline (DBQ), 5-chloro-7-iodo-8-hydroxyquinoline (CIQ) and 8-hydroxy-7-iodo-5-quinoline sulfonic acid (SIQ), respectively. The proposed method has been successfully applied for the determination of the studied compounds in pure form and in commercial formulations. The obtained results are in good agreement with those obtained from reported methods.     

Complexation equilibria and spectrophotometric determination of zinc (II) with 2-(4′-methyl-2′-thiazolylazo)-4,6-dimethylphenol

2-(4′-methyl-2′-thiazolylazo)-4,6-dimethylphenol has been synthesized and its acid—base behaviour (pK_a1=0.03 ± 0.01, pK_a2=9.70±0.09) and complexation equilibria with zinc (logβ₁₀₁=6.70±0.04, logβ₁₀₂ = 13.70±0.02) studied in a 40% (v / v) ethanol—water medium at I=0.25 M NaClO₄. A spectrophotometric method for the determination of 0.2–1.5 ppm of zinc has been developed (ε=1.83 × 10⁴ 1. mol⁻¹ cm⁻¹ at 590 nm) and applied to its determination in lubricating oils.     

Separation and inductively coupled plasma optical emission spectrometric (ICP-OES) determination of trace impurities in nuclear grade uranium oxide

A simple and rapid inductively coupled plasma optical emission spectrometric method for the determination of trace level impurities like REEs, Y, Cd, Co, V, Mg, B, Ca, Cr, Mn, Ni, Cu, Zn and Al in uranium oxide samples is described. The method involves solvent extraction separation of uranium from 6 M HNO₃ acid medium using di (2-ethyl hexyl) phosphoric acid in toluene, which selectively separates uranium leaving behind the trace impurities in the aqueous media, for quantification by ICP-OES. The method has been applied to few synthetic samples and five certified reference U₃O₈ standards. The results are compared with other methods such as TBP-TOPO-CCl₄ and 1,2 diaminocyclohexane N,N,N′,N′-tetra acetic acid (CyDTA)–ammonium hydroxide (NH₄OH) separation techniques. Different experimental parameters like contact time, acidity, aqueous to organic ratio etc., are optimized for better and accurate results. The method is simple, rapid, accurate and precise for all the studied elements, showing a relative standard deviation of 1.5–12.0% at trace levels studied (5.5–12% at 0.2 μg/mL and 1.5–6.0% at 0.5 μg/mL), on the synthetic samples prepared from high purity oxides.     

A rapid spectrophotometric method for the determination of cobalt in industrial, environmental, biological, pharmaceutical and soil samples using bis(5-bromosalicylaldehyde)orthophenylenediamine

A very simple, ultra-sensitive and fairly selective spectrophotometric method is presented for the determination of cobalt at trace levels using bis(5-bromosalicylaldehyde)orthophenylenediamine (BBSOPD). The method is based on the reaction of nonabsorbent BBSOPD in a slightly acidic (0.001–0.0025 M H₂SO₄ or pH 3.4–4.0) and 50% N,N-dimethylformamide media with cobalt(II) to produce a highly absorbent orange colored chelate-product with an absorption maximum at 473 nm. The reaction is instantaneous and the absorption remains stable for 24 h. The average molar absorption coefficient and Sandell’s sensitivity were found to be 5.84 × 10⁴ l mol^-1 cm^-1 and 9.0 ng cm^-2 of cobalt(II), respectively. Linear calibration graphs were obtained for 0.02–4.0 mg l^-1 of Co(II). The stoichiometric composition of the chelate is 1:1 (Co(II):BBSOPD). A large excess of over 50 cations, anions and complexing agents do not interfere in the determination. The method was successfully used for the determination of cobalt in several standard reference materials (steels and alloys), environmental waters (potable and polluted), biological samples (human blood and urine), pharmaceutical and soil samples and solutions containing both cobalt(II) and cobalt(III) as well as some complex synthetic mixtures. The method has high precision and accuracy.     

New catalysts of dry reforming of methane into synthesis gas

New catalysts have been developed for the production of synthesis gas via a resource-saving and environmentally friendly process—dry reforming of methane. The catalysts are fabricated from NdCaCo_1–xNi _x On precursors (x = 0, 0.2, 0.4, 0.6, 0.8, 1) synthesized by a ceramic method. According to X-ray powder diffraction, when reacting with an equimolar CH₄/CO₂ mixture at 800–900°С, the precursors are converted into a mixture of neodymium and calcium oxides and cobalt and nickel metals. The catalyst based on NdCaNiO _n at 850°С has ensured high conversions of methane (91%) and CO₂ (86%) at СО and hydrogen yields of 88 and 78%, respectively. At 940°С, the yield of CO is close to the quantitative one (97%).     

Determination of 2,6-di-tert-butylphenol in Irganox 1425

An ion suppression reversed phase high performance liquid chromatography method has been developed for the determination of 2,6-di-tert-butylphenol in Irganox 1425. Separation was carried out on a Welch Material Ultimate XB-C₁₈ column (5 μm, 150 mm × 4.6 mm), using methanol–water (0.1 % HClO₄) (75/25, v/v) mixture as the mobile phase in an isocratic elution. Detection was performed by UV absorption at a wavelength of 275 nm, and the limit of detection was 0.2 μg/mL. The method presented excellent repeatability and precision with both intra- and inter-day relative standard deviations (RSDs) of less than 2.0 %, as well as satisfactory accuracy with the recovery of 98.7–102.3 %, and therefore can be applied for the quality control analysis of Irganox 1425 industrial product.     

RP‐HPLC Method for the Determination of Tenofovir in Pharmaceutical Formulations and Spiked Human Plasma

Abstract

A simple reverse‐phase high‐performance liquid chromatographic method for the determination of tenofovir disoproxil fumarate (TDF) in pharmaceutical formulations and human plasma samples has been developed and validated. Piroxicam (PRX) was used as an internal standard. The assay of the drug was performed on a CLC C₁₈ (5 μ, 25 cm×4.6 mm i.d.) with UV detection at 259 nm. The mobile phase consisted of acetonitrile–water mixture in the ratio of 75∶25, and a flow rate of 1 ml/min was maintained. The standard curve was linear over the range of 0.2–10 µg/ml (r ²=0.9966). Analytic parameters have been evaluated. Within‐day and between‐day precision as expressed by relative standard deviation was found to be less than 2%. The method has been applied successfully for the determination of TDF in spiked human plasma samples and pharmaceutical formulations.     

A Validated HPLC Method for the Determination of GABA by Pre-Column Derivatization with 2,4-Dinitrofluorodinitrobenzene and Its Application to Plant GAD Activity Study

A validated, selective, and sensitive chromatographic method for determination of γ-aminobutyric acid (GABA) has been developed by precolumn derivative of the sample with 2,4-dinitrofluorodinitrobenzene (FDNB). The derivatives were separated with RP-HPLC on a C₁₈ column and UV detection (360 nm). The calibration curve was linear over a range of 0.2–5.0 mg/mL GABA with a correlation coefficient of 0.9954. The precision of this method is high (RSD = 0.061%). This method also possessed high recovery rate (>99%) and good stability over a period of four weeks. The method was successfully used to determine the glutamate decarboxylase (GAD) activity in several plant tissues.     

Kinetic determination of traces of Th(IV) on the basis of its catalytic effect in environmental water samples

A new analytic kinetic-catalytic method based on catalytic effect of traces of Th(IV) on the reaction oxidation of 4-hydroxycoumarin by KMnO₄ were developed and validated in this study. The linearity of the method was obtained in the range of concentrations of Th(IV) from 0.2 to 2 ??g mL^?1. The probable relative error is in the interval from 7.88 to 3.50% for the range of concentration of Th(IV) from 0.5 to 2 ??g mL^?1. Kinetic equations of investigated reactions were established. The proposed kinetic method was directly applied on determination of Th(IV) in environmental water samples. It was found that the results of Th(IV) determination in water samples obtained by proposed kinetic method and comparative atomic absorption spectrometry method were statistically agreeable.     

Flow‐Injection Chemiluminometric Analysis of Thyroxine Hormone in a KMnO,4‐Na2SO3 System

An analytical method consisting of flow injection sampling and chemiluminescence detection for the determination of thyroxine hormone is described. It is based on the weak chemiluminescent reaction of KMnO₄ ‐ Na₂SO₃ in acidic medium, which is enhanced by the addition of thyroxine hormone. The chemiluminescence intensity was correlated linearly with concentration of thyroxine in the range of 1.0 × 10^?7 – 2.0 × 10^?6 mol L^?1 (r² = 0.9976) with a relative standard deviation (n = 4) in the range of 1.0 – 1.9%. The limit of detection (3σ blank) is 5.0 × 10^?9 mol L^?1 with a sample throughput of 180 h^?1. The method has been applied to the determination of thyroxine in pharmaceutical preparations and the results are in good agreement with the value reported. Metal and non‐metal ions and some organic compounds commonly present in tablets and some amino acids were also studied for thyroxine determination.     

Differential Pulse Polarographic Determination of Nitrate in AUT Solution

A differential pulse polarographic method for the determination of nitrate ion has been developed. With 0.5 M CaCl₂ as supporting electrolyte, NO^?₃ is reduced to give a peak with E_1/2=–1.836 Volt vs. the Ag/AgCl electrode. The differential pulse polarographic peak height is proportional to the nitrate concentration from 20 to 60 ppm. The detection limit for nitrate is 2 ppm in pure aqueous solution. In the determination of 40 ppm nitrate a relative precision (relative standard deviation) of less than 2% was achieved. Nitrite interferes seriously and should be absent if accurate results are required. The method has been applied to the determination of nitrate in Ammonium Uranyl Tricarbonate (AUT) Solution, results obtained by this method are compared to those obtained by ion chromatography. The agreement between the two sets of results suggests that the DPP method can be used with a fair degree of confidence.     

Polarographic Behavior of Gemfibrozil in the Presence of Dissolved Oxygen and Its Analytical Application

The polarographic behavior of gemfibrozil is investigated in 0.2 mol L^?1 KH₂PO₄‐Na₂HPO₄ (pH 5.8±0.1)‐8% ethanol supporting electrolyte in the absence and the presence of dissolved oxygen. The results demonstrate that the polarographic reduction peak at ca. ?1.17 V is a catalytic hydrogen wave after deaeration, and the enhanced reduction peak in the presence of dissolved oxygen is the so‐called parallel catalytic hydrogen wave. Based on the parallel catalytic hydrogen wave, a novel method has been developed for the determination of gemfibrozil by single sweep polarography. Calibration plot is linear in the range of 1.8×10^?7–2.4×10^?6 mol L^?1 and detection limit is 9.0×10^?8 mol L^?1. The proposed method is applied to the direct determination of the gemfibrozil in pharmaceutical preparations. The proposed method is simpler, faster and more sensitive than the known methods for gemfibrozil analyses.     

Direct and Second Order Analogue Derivative Extraction-Spectrophotometric Determination of Iron with 2 (4, 5-Dimethyl-2-Thiazolylazo)-4, 6-Dimethylphenol

Abstract

An extraction-spectrophotometric method for the determination of trace amounts of iron based on its extraction into chloroform with 2-(4, 5-dimethyl-2-thiazolylazo)-4, 6-dimethylphenol has been developed, which allows the determination of 5–28 μg Fe (?₇₇₃ = 1.38×10⁴ 1. mol^?1. cm^?1). The use of second order analogue derivative spectrophotometry allows the determination of down to 0.2–5 μg, Fe. The methods are quite selective and have been applied to the determination of iron in mineral waters.     

Voltammetric Determination of Allura Red AC onto Carbone-paste Electrode Modified by Silica with Embedded Cetylpyridinium Chloride

In current study the carbon-paste electrode modified by silica with embedded cetylpyridinium chloride for determination of Allura Red AC have been developed. The optimal conditions were determined to be for the square-wave voltammetric quantification: pH=2, E_ads=300 mV, t_ads=300 s, amplitude – 40 mV, frequency – 25 Hz and potential scan rate is 250 mV sec⁻¹. The calibration plot has linearity in the concentration ranges 0.04–0.2 μM and 0.2–1.00 μM. The LOD and LOQ are equal to 0.005 μM and 0.015 μM respectively. The crafted sensor has been applied successfully to model solutions and in jelly candies analysis with RSD no more than 10 %.