Trace analysis of organics in aqueous samples by concentration in plastic tubing and multiplex gas chromatography

Summary The inside wall of an uncoated polyethylene capillary traps organic substances from a water sample pumped through it by a nitrogen gas stream. Heating the capillary in a chromatographic oven slowly releases the trapped organic substances from the wall. Nitrogen carrier gas transports sample substances released through a thermal desorption modulator and onto a chromatographic column. Pulsing the temperature of the modulator modulates the concentrations of sample components as they enter the column. Computing the cross correlation of the detector output signal against the applied modulation signal generates the chromatogram. Detection limits below 1 ppb are possible using a flame ionization detector. No sample pretreatment or cold trap is required.     

Recent methods for the determination of volatile and non-volatile organic compounds in natural and purified drinking water

Four analytical protocols for the extraction and preconcentration of organic residues in natural or purified drinking water were investigated and compared: closed loop stripping analysis; simultaneous extraction-distillation; purge and trap analysis; continuous liquid-liquid extraction. Organic extracts were submitted to a variety of separation and identification techniques. Volatiles were determined by conventional capillary column gas chromatography with tandem mass spectrometry, using triple-stage quadrupole instruments. Non-volatile and thermally labile molecules were investigated by several different techniques (high-temperature gas chromatography, capillary column supercritical fluid chromatography, pyrolysis gas chromatography-mass spectrometry, thermospray liquid chromatography with tandem mass spectrometry and conventional fast-atom bombardment with tandem mass spectrometry). Several samples recently examined in the laboratory provide examples of this multitechnique approach for a more complete knowledge of the organic carbon distribution in water-dissolved organic matter, taking into account organic substances with widely different volatilities, polarities and thermal stabilities.     

Determination of volatile amines in drug substances by capillary gas chromatography

The determination of small, water soluble amines such as aziridine and 2-chloroethylamine, in drug substances at trace levels is described. After removal of the bulk of the drug substance by extraction or precipitation, derivatization with acid chlorides is performed. In a two-phase (water-organic solvent) system, this derivatization reaction is accomplished almost simultaneously with the extraction of the product to the organic layer. The organic layer is analyzed by gas chromatography using on-column injection and selective detection. Detection limits are approx. 0.2 mg/kg for aziridine and approx. 0.5 mg/kg for 2-chloroethylamine.     

Application of activated carbon in the characterization of nitrogen compounds and phthalates in a landfill leachate

The goal of this work was the development of a methodology based on solid phase extraction (SPE) to characterize nitrogen compounds and phthalates from landfill leachate samples. Activated carbon (AC) was used to extract all the organic compounds from the samples. The samples were collected in Porto Alegre-South Brazil. As the AC used had small particle size, it was impossible to use it in the form of packed cartridges; hence, it had to be applied in a batch mode. The desorption of the organic compounds from the AC was made by sonication with dichloromethane. The extract was analyzed by gas chromatography with mass spectrometric detection (GC-MSD). Some aspects of the validation of the methodology were also established. Several nitrogen compounds and phthalates were identified in the samples, proving the efficiency of this method with regard to the selectiveness for these substances.     

Thermal desorption comprehensive two-dimensional gas chromatography for in-situ measurements of organic aerosols

The complexity of organic composition and temporal variability of atmospheric aerosols presents an extreme analytical challenge. Comprehensive two-dimensional gas chromatography (GC x GC) has been used on time integrated filter samples to reveal the presence of thousands of individual organic compounds in aerosols, but without defining the temporal variability in composition ideal for providing information on source resolution and human exposure to specific pollutants. We hereby introduce a new instrument, 2D-TAG, which combines our in-situ thermal desorption aerosol GC (TAG) instrument with GC x GC allowing for dramatically improved separation of organics with automated measurements at hourly timescales.     

Graphene oxide bonded fused-silica fiber for solid-phase microextraction-gas chromatography of polycyclic aromatic hydrocarbons in water

A novel chemically bonded graphene oxide/fused-silica fiber was prepared and applied in solid-phase microextraction of six polycyclic aromatic hydrocarbons from water samples coupled with gas chromatography. It exhibited high extraction efficiency and excellent stability. Effects of extraction time, extraction temperature, ionic strength, stirring rate and desorption conditions were investigated and optimized in our work. Detection limits to the six polycyclic aromatic hydrocarbons were less than 0.08 μg/L, and their calibration curves were all linear (R(2)≥0.9954) in the range from 0.05 to 200 μg/L. Single fiber repeatability and fiber-to-fiber reproducibility were less than 6.13 and 15.87%, respectively. This novel fiber was then utilized to analyze two real water samples from the Yellow River and local waterworks, and the recoveries of samples spiked at 1 and 10 μg/L ranged from 84.48 to 118.24%. Compared with other coating materials, this graphene oxide-coated fiber showed many advantages: wide linear range, low detection limit, and good stability in acid, alkali, organic solutions and at high temperature.     

Identification and determination of synthetic pyrethroids,chlorpyriphos, and neonicotinoids in water by gas and liquid chromatography

A number of procedures is developed for the identification and determination of active substances of preparations Eforia®, Nurelle D, Engeo® 247 SC and Borey, i.e., imidacloprid, λ-cyhalothrin, thiamethoxam, chlorpyriphos, and cypermethrin, in water in the concentration range 0.001–0.1 mg/L by gas chromatography with mass spectrometry and electron-capture detection, and HPLC with diode-array detection. Pesticides were extracted from water samples with dichloromethane; the enrichment factors are 500–10000. The analysis takes 1–2 h, the relative standard deviation of the results does not exceed 15%.     

Fabrication of polyaniline‐coated halloysite nanotubes by in situ chemical polymerization as a solid‐phase microextraction coating for the analysis of volatile organic compounds in aqueous solutions

We have synthesized an organic–inorganic polyaniline–halloysite nanotube composite by an in situ polymerization method. This nanocomposite is immobilized on a stainless‐steel wire and can be used as a fiber coating for solid‐phase microextraction. It was found that our new solid‐phase microextraction fiber is an excellent adsorbent for the extraction of some volatile organic compounds in aqueous samples in combination with gas chromatography and mass spectrometry. The coating can be prepared easily, is mechanically stable, and exhibits relatively high thermal stability. It is capable of extracting phenolic compounds from water samples. Following thermal desorption, the phenols were quantified by gas chromatography with mass spectrometry. The effects of extraction temperature, extraction time, sample ionic strength, stirring rate, pH, desorption temperature and desorption time were studied. Under optimal conditions, the repeatability for one fiber (n = 5), expressed as the relative standard deviation, is between 6.2 and 9.1%. The detection limits range from 0.005 to 4 ng/mL. The method offers the advantage of being simple to use, with a shorter analysis time, lower cost of equipment and higher thermal stability of the fiber in comparison to conventional methods of analysis.     

Biodegradation studies of 4-fluorobenzoic acid and 4-fluorocinnamic acid: an evaluation of membrane inlet mass spectrometry as an alternative to high performance liquid chromatography and ion chromatography

The biodegradation of 4-fluorobenzoic acid (4-FBA) and 4-fluorocinnamic acid (4-FCA) has been monitored by membrane inlet mass spectrometry (MIMS) using a hollow-fibre silicone membrane. A novel in-membrane pre-concentration/thermal desorption (IMP-MIMS) technique was employed for MIMS analysis using an oven temperature profile that allowed semi-volatile organic compounds to be accumulated in the membrane and then released by rapid heating. Air drying of the membrane between the analyte pre-concentration and thermal desorption stages improved mass spectrometric performance by removing residual water from the membrane. The concentrations of 4-FBA and 4-FCA determined by MIMS compare well with data obtained by high performance liquid chromatography (HPLC). Stoichiometric amounts of fluoride were monitored using ion chromatography (IC). Intermediates in the biodegradation pathway were identified by liquid chromatography/mass spectrometry (LC/MS). These data establish the potential of MIMS as an alternative to chromatographic methods for monitoring the biodegradation of semi-volatile organic compounds.     

Combination of the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method and dispersive liquid-liquid microextraction in the identification and determination of pesticides from various classes in food products by gas-liquid chromatography

A procedure for the identification (104 substances) and determination (40 substances) of the active components of combined pesticides from different classes in water, vegetables, fruits, and meat by gas chromatography with mass-spectrometric and electron-capture detectors was proposed. The pesticides were extracted from the samples of vegetables, fruits, and meat with acetonitrile using the QuEChERS method. The extracts were preconcentrated by a factor of 50–60 and additionally purified by dispersive liquid-liquid microextraction. The pesticides were extracted from water by dispersive liquid-liquid microextraction with hexane (degree of concentration was higher than 100). The limits of detection by the time-of-flight detector equaled 0.01–0.02 mg/kg for solid samples and 1–2 μg/L for aqueous solutions. The limits of quantitation for pesticides were 1–2 mg/kg for solid samples and 0.05–0.1 μg/L for solutions. The analysis time was 1–2 h, and the RSD of the results did not exceed 18%.     

Characterization of polyarylamide fibers by inverse gas chromatography

We determined a group of estrogenic compounds by solid-phase microextraction (SPME) coupled to high-performance liquid chromatography (HPLC) with both ultraviolet (UV) and electrochemical detection (ED). A modified liquid chromatograph was used. Polyacrylate fibers (85 microns) were used to extract the analytes from the aqueous samples. Dynamic and static modes of desorption were compared and the variables affecting both absorption and desorption processes in SPME-HPLC were optimized. Static desorption gave the best recoveries and peak shapes. The performance of the SPME-HPLC-UV-ED method was checked with river water and wastewater. The method enabled estrogenic compounds to be determined at low-microgram l-1 levels in real water samples. Limits of detection were between 0.3 and 1.1 micrograms l-1 using UV detection and between 0.06 and 0.08 microgram l-1 using ED. beta-Estradiol was found in samples from a wastewater treatment plant at concentrations between 1.9 and 2.2 micrograms l-1.     

Development of direct microwave desorption/gas chromatography mass spectrometry system for rapid analysis of volatile components in medicinal plants

A new direct microwave desorption–gas chromatography‐mass spectrometry method was developed for the analysis of the essential oils of medicinal plants. A homemade direct microwave desorption system was fabricated and used for the desorption of volatile components of medicinal herbs. The desorbed volatiles are transferred directly into the gas chromatography injector for analysis in a one‐step process. Approximately 0.3 g of the herb was needed for the desorption of samples in 60 s. In this study, more than 53 volatile compounds were identified and quantified for Echinophora platyloba DC as model herb sample. The results were found to be in good agreement with the conventional hydrodistillation extraction data. The described results show that direct microwave desorption is fast, simple, and easy to automate and requires only a small amount of sample. The results indicate that essential oil components valuable for varietal identification and characteristic of each variety analyzed when direct microwave desorption–gas chromatography‐mass spectrometry was used for analysis.     

Organic substances in potable water and in its precursor. III. The closed-loop stripping procedure compared with rapid liquid extraction.

An attempt is made to define the role of gas chromatography in the investigation of organic substances in water, which is important because the handling of water samples before gas chromatographic (GC) analysis depends entirely on the information expected from the subsequent separation, identification and quantification. Practical long-term experience with the previously published closed-loop stripping procedure (with intermediate adsorption on activated carbon) is described and further refinements are reported. A rapid and simple liquid extraction method is described, based on shaking 11 of water with a small volume (0.5-1 ml) of solvent and subsequent high-resolution GC analysis of the extract. Qualitative and semi-quantitative information at the parts per 10(12) level is easily obtained. Further studies of recovery rates under conditions where the volatility and polarity of extracted organic substances are varied are described for both methods. The suitability of both methods for the analysis of different types of water samples is discussed.     

Combined use of liquid chromatography triple quadrupole mass spectrometry and liquid chromatography quadrupole time-of-flight mass spectrometry in systematic screening of pesticides and other contaminants in water samples

As a suitable way for routine screening of pesticides and control of other organic contaminants in water, the combination of liquid chromatography triple quadrupole tandem mass spectrometry (LC–QqQ-MS/MS) and liquid chromatography–hybrid quadrupole time-of-flight mass spectrometry (LC–QTOF-MS) has been applied to the analysis of 63 surface and waste water samples after conventional solid-phase extraction (SPE). The extracts were screened for 43 pesticides or degradation products by LC–QqQ-MS/MS achieving limits of detection (LOD) ranged from 0.04 to 2 ng L⁻¹. Of the 43 selected pesticides, 33 were detected in water samples. The ESI–QTOF MS instrument was run using two simultaneous acquisition functions with low and high collision energy (MS^E approach) and acquiring the full mass spectra. A home-made database containing more than 1100 organic pollutants was used for substance identification. Around 250 of these compounds were available at the laboratory as reference standards. Five pesticides and 3 of their degradation products, different to those selected in the QqQ method, were detected by QqTOF-MS. Thirteen pharmaceuticals and two drugs of abuse were also identified in the samples. In practice, the sample preparation proved to be suitable for both techniques and for a wide variety of substances with different polarity. Mutual confirmation and evidence of co-occurrence of several other organic contaminants were the main advantages of the combination of both techniques.     

In situ extraction/preconcentration of PCBs and PAHs from aqueous samples using polytetrafluoroethylene tubing

In situ extraction/preconcentration of organics from water samples was accomplished using polytetrafluoroethylene (PTFE) tubing. Polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) were concentrated inside the tubing by flowing aqueous samples through it. The adsorbed PCBs and PAHs were then recovered by solvent desorption. The eluent was subsequently analyzed using gas chromatography with electron capture detection (GC-ECD) or gas chromatography with flame ionization detection (GC-FID). Multiple samples were simultaneously processed to concentrate organics onto several PTFE tubings. Analyses of seawater and surface microlayers using this technique demonstrated that organics in the surface microlayers were elevated with respect to those in the water column, consistent with previous findings.     

Miniaturized solid-phase extraction as a sample preparation technique for the determination of phthalates in water

Miniaturized solid-phase extraction (SPE) has been developed and successfully employed for the determination of organic species in water samples by liquid chromatography (LC). The method is based on the concept of a microscale extraction technique using a fused-silica capillary column for gas chromatography (GC), so-called in-tube solid-phase microextraction (SPME). The extraction conditions, such as the extraction time and flow-rate for the extraction and desorption process, were investigated as well as the effect of the internal structure of the extraction capillary on the efficiency. By inserting a stainless steel wire into the extraction capillary to reduce the internal volume of the capillary with the same surface area of the coating, an improved extraction and pre-concentration effects were obtained. Further pre-concentration was accomplished by the extraction device with a novel fiber-in-tube configuration. The direct coupling of the extraction method with a LC system has made it possible to determine low levels of phthalates in water samples without high consumption of organic solvents. The system developed must have potential applications for the analysis of environmental and biological samples in aqueous sample matrices.     

Determination of priority organic micro-pollutants in water by gas chromatography coupled to triple quadrupole mass spectrometry

A multiclass method has been developed for screening, quantification and confirmation of organic micro-pollutants in water by gas chromatography coupled to mass spectrometry with a triple quadrupole analyzer. The work has been focused on the determination of more than 50 compounds belonging to different chemical families: 19 organochlorine and organophosphorus insecticides, 6 herbicides, 7 polychlorinated biphenyls, 16 polycyclic aromatics hydrocarbons, 2 brominated diphenyl ethers, and 3 octyl/nonyl phenols and pentachlorobenzene. Most of these analytes are included in the list of priority substances in the framework on European Water Policy.Analyte extraction was performed by solid phase extraction using C₁₈ cartridges, and five isotopically labeled standards were added before extraction as surrogates. Analyses were performed by gas chromatography with tandem mass spectrometry (MS/MS) in electron impact mode. Accuracy and precision were evaluated by means of recovery experiments using water samples fortified at two concentration levels (25 and 250 ng L⁻¹), with satisfactory results for most of analytes. The excellent selectivity and sensitivity reached in selected reaction monitoring mode allowed us satisfactory quantification and confirmation at levels as low as 25 ng L⁻¹. Two MS/MS transitions were acquired for each analyte, using the Q/q intensity ratio as a confirmatory parameter. The method developed was applied to the analysis of surface, ground and wastewater samples collected from the Valencia Region (Spain).Analytical methodology using negative chemical ionization mode was also validated for the organochlorine compounds selected, showing a superior sensitivity and lower detection limits.     

Analysis of extractable organic compounds in water by gas chromatography mass spectrometry: applications to surface water

Contamination of water by organic pollutants is a common environmental problem. Over a period of 1 year, the surface water of a canal network (Languedoc-Roussillon area, France) was analysed in order to identify organic compounds and to monitor its quality. Pollutants were extracted from 19 l of raw water using methylene chloride in a continuous countercurrent liquid-liquid extractor with a pulsed column. The extraction was performed at a pH above 11 and again at a pH below 2 according to U.S. Environmental Protection Agency method 625. The extract was analysed by gas chromatography/mass spectrometry, using two ionization techniques, namely electron ionization and chemical ionization. Mass spectra obtained by electron ionization were compared with those in a database (NIST). Some natural compounds and micropollutants were identified. Their structures were confirmed by chemical ionization (methane). One hundred and ten substances, making up the broad spectrum of extractable compounds in the surface water studied, were found by this method at a nanogram per litre concentration level. Among them, 13 are priority pollutants. These specific pollutants were qualified.     

Solid-phase microextraction coupled to high-performance liquid chromatography to determine phenolic compounds in water samples

Solid-phase microextraction (SPME) coupled to high-performance liquid chromatography (HPLC) with ultraviolet (UV) and electrochemical detection (ED) has been applied to determine 11 phenolic compounds considered priority pollutants by the US Environmental Protection Agency. 85 microm polyacrylate fibers were used to extract the analytes from the aqueous samples. Two different designs of the liquid chromatograph were compared in combination with SPME. Dynamic and static modes of desorption in both HPLC designs were compared and the variables affecting both absorption and desorption processes in SPME-HPLC were optimized. Static desorption in both HPLC systems showed better recoveries for the phenolic compounds. The performance of the SPME-HPLC-UV-ED method was evaluated with river water and wastewater samples. The method enabled the determination of phenolic compounds at low levels in these water samples.     

Environmentally friendly solid‐phase microextraction coupled with gas chromatography and mass spectrometry for the determination of biogenic amines in fish samples

In this work, a facile and environmentally friendly solid‐phase microextraction assay based on on‐fiber derivatization coupled with gas chromatography and mass spectrometry was developed for determining four nonvolatile index biogenic amines (putrescine, cadaverine, histamine, and tyramine) in fish samples. In the assay, the fiber was firstly dipped into a solution with isobutyl chloroformate as derivatization reagent and isooctane as extraction solvent. Thus, a thin organic liquid membrane coating was developed. Then the modified fiber was immersed into sample solution to extract four important bioamines. Afterwards, the fiber was directly inserted into gas chromatography injection port for thermal desorption. 1,7‐Diaminoheptane was employed as internal standard reagent for quantification of the targets. The limits of detection of the method were 2.98–45.3 μg/kg. The proposed method was successfully applied to the detection of bioamines in several fish samples with recoveries ranging 78.9–110%. The organic reagent used for extraction was as few as microliter that can greatly reduce the harm to manipulator and environment. Moreover, the extraction procedures were very simple without concentration and elution procedures, which can greatly simplify the pretreatment process. The assay can be extended to the in situ screening of other pollutant in food safety by changing the derivatization reagent.