Spectrophotometric extractive titrations-IV Determination of zinc in germanium dioxide and germanium chloride

A simple and selective determination of zinc in germanium chloride and germanium dioxide is described. The sample is dissolved in sodium potassium tartrate solution and zinc is titrated spectrophotometrically at 532 mug( with a dithizone solution in carbon tetrachloride without discarding the organic phase. Interfering ions such as Bi(III), Cu(II), Cd(II), Co(II), Ni(II), Pb(II), Sn(II), Fe(II), Fe(III), Mn(II) and T1(I) are masked with bis(2-hydroxyethyl)dithiocarbamate. The detection limit is 3-23 x 10(-5)% of zinc and this may be lowered by taking a larger sample and by performing the analysis in a closed system. A simplified technique, consisting of the simultaneous titration of the sample and blank, is described.     

Titration of cyanide and hexacyanoferrate(II) with silver nitrate-II Determination of sodium cyanide and sodium hexacyanoferrate(II) in a complexing agent

Cyanide and hexacyanoferrate(II) can be titrated with silver nitrate in the presence of a complexing agent masked with a suitable metal ion. A method for determination of sodium cyanide and sodium hexacyanoferrate(II) in the presence of sodium nitrilotriacetate masked with magnesium ions is given as an example.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

Determination of germanium by potentiometric stripping analysis and adsorption potentiometric stripping analysis

Potentiometric stripping analysis was applied to determination of germanium(IV) in 0.2M NH₃-NH₄Cl (pH 8.4) buffer solution at −1.8 V (vs. Ag/AgCl), with dissolved oxygen or Hg(II) as oxidant. The sensitivity was 8.5 × 10⁻⁹M in the presence of 2.0 × 10⁻⁵M Hg(II) with plating for 15 min after deaeration for 20 min. Cyclic voltammetry revealed that GE(IV) å Ge at the surface of the mercury-film electrode in a one-step irreversible reduction reaction, and the Ge at the electrode was oxidized by dissolved oxygen in the solution. The presence of complexing agents such as Alizarin Red (ARS), which forms a Ge(IV) complex adsorbed at the electrode, improved the sensitivity by one order of magnitude. The presence of adsorption was revealed by the temperature coefficient, the electrocapillary curve and cyclic voltammetry. Ge-containing samples were analysed by the proposed methods and agreement with the results obtained by other methods was excellent.     

Synthesis and structures of an unusual germanium(II) calix[4]arene complex and the first germanium(II) calix[8]arene complex and their reactivity with diiron nonacarbonyl

The protonolysis reaction of the germanium(II) amide Ge[N(SiMe3)2]2 with calix[4]arene and calix[8]arene furnishes the two germanium(II) calixarene complexes {calix[4]}Ge2 and {calix[8]}Ge4, respectively, which have been crystallographically characterized. The calix[4]arene complex contains a Ge2O2 rhombus at the center of the molecule and is one of the only four germanium(II) calix[4]arenes that have been structurally characterized. The calix[8]arene species is the first reported germanium calix[8]arene complex, and it exhibits an overall bowl-shaped structure which contains two Ge2O2 fragments. The latter complex reacts with Fe2(CO)9 to yield an octairon compound, which has also been structurally characterized and contains four GeFe2 triangles arranged around the macrocyclic ring. The germanium(II) centers are oxidized to germanium(IV) in this process, with concomitant reduction of the neutral diiron species to Fe2(CO)(8)2- anions.     

Determination of germanium by graphite-furnace atomic-absorption spectrometry

The premature loss of germanium as volatile GeO results in low sensitivity and poor reproducibility in the determination of germanium by graphite-furnace atomic-absorption spectrometry. This interference can be eliminated by suppressing the premature reduction of GeO(2) to GeO during the ashing step, and dissociating the germanium oxides into the atoms simultaneously with their vaporization during the atomization step. The premature reduction of GeO(2) to GeO has been successfully prevented by several approaches: (1) diminishing the reducing activity of the graphite furnace by (a) oxidizing the graphite surface and intercalating oxygen into the graphite lattice with oxidizing acids, such as nitric or perchloric, in the sample solution, or (b) using a tantalum-treated graphite furnace; (2) keeping the analyte as germanium (IV) by addition of sodium or potassium hydroxide to the sample solutions.     

Two-column ion-exchange method for the determination of copper-complexing capacity and conditional stability constants of copper complexes for ligands in natural waters

Sample solutions titrated with Cu(2+) ions are passed sequentially through two ion-exchange columns in an automated flow system. The first column is packed with Chelex-100 resin and retains Cu(2+) ions that are free or derived from copper complexes that dissociate in the column. The second column is packed with AG MP-1 anion-exchange resin and retains negatively charged Cu(II) complexes. The retained copper species are then eluted from the columns and determined on-line with a flame atomic-absorption spectrophotometer. It is necessary to correct for a small fraction of free Cu(2+) ions that pass through the first column and are retained by the second column. The Cu(II)-complexing capacity of sample solutions is determined from plots of the concentration ratio of free Cu(2+) ions to Cu(II) complexes vs. the concentration of free Cu(2+) ions. Conditional stability constants of the copper complexes are also estimated from these plots. The complexing capacity of sample solutions is also determined rapidly by measuring the concentration of complexed Cu(II) after spiking the sample with an excess of Cu(2+) ions. The sample solutions tested were 4.0muM NTA, 4.0-mg/l. humic acid, and a river water.     

Reactivity of divalent germanium alkoxide complexes is in sharp contrast to the heavier tin and lead analogues

The chemistry of β-diketiminate germanium alkoxide complexes has been examined and shown to be in sharp contrast to its heavier congeners. For instance, (BDI)GeOR (BDI = [{N(2,6-(i)Pr(2)C(6)H(3))C(Me)}(2)CH], R = (i)Pr, (s)Bu, (t)Bu) does not react with carbon dioxide to form a metal carbonate complex. Addition of aliphatic electrophiles, such as methyl iodide or methyl triflate, results in the net oxidative addition to the germanium, giving cationic tetravalent germanium complexes, [(BDI)Ge(Me)OR][X] (X = I, OTf). An examination of the contrasting reactivities of the alkoxide ligand and the germanium loan pair with Lewis acids yielded the unusual germanium(II)-copper(I) adduct, {μ(2)-Cu(2)I(2)}[(BDI)GeO(t)Bu](2). This complex not only displays a rare example of a divalent Ge-Cu bond, but is the first example in which a planar Cu(2)I(2) diamond core possesses a three-coordinate copper bound to another metal center.     

Coordination complexes of silicon and germanium halides with neutral ligands

The coordination chemistry of silicon(IV) and (II) and germanium(IV) and (II) halides with neutral donor ligands from groups 15 (N, P or As) and 16 (O, S or Se) is reviewed; N-heterocyclic carbene complexes are also included. The focus is mainly on results published after 1990 and illustrates that significant recent developments have been made in the coordination chemistry of low-valent silicon and germanium halide complexes in particular; this is expected to pave the way for much new reaction chemistry both from a fundamental and application-driven perspective.     

Resolution of the Optical Isomers of Underivatisized Amino Acids on Chemically Bonded Chiral Phases by Ligand Exchange Chromatography

Abstract

A method for the direct separation of racemates by HPLC is described. A chiral stationary phase is synthesized, suitable for ligand exchange chromatography. L-proline is chemically bonded to silica gel via 3-glycidoxypropyltrimethoxysilane. The bonded support is loaded with Cu(II) ions as a complexing agent. Complete resolution of amino acid racemates can be obtained in less than ten minutes. α-values up to 3.5 are observed.     

A Selective Film Based on Poly(3‐octylthiophene) Doped with Dihydroxyanthraquinone Sulfonate

A stable film of poly(3‐octylthiophene)–dihydroxyanthraquinone sulfonate has been synthesized electrochemically in non‐aqueous solution. The incorporation of dihydroxyanthraquinone sulfonate as an anionic complexing ligand into poly(3‐octylthiophene) film during electropolymerization was achieved and copper ions were accumulated by reduction on the electrode surface. The presence of dihydroxyanthraquinone sulfonate during the electrochemical polymerization of 3‐octylthiophene is shown to impact the sensitivity and the stability of the organic conducting film electrode response. The electroanalysis of copper(II) ions using conducting polymer electrode was achieved by differential pulse anodic stripping voltammetry with remarkable selectivity. The analytical performance was evaluated and linear calibration graphs were obtained in the concentration range of 50–400 ng mL^?1 copper(II) ion for 240 seconds accumulation time and the limit of detection was found to be 7.8 ng mL^?1. To check the selectivity of the proposed stripping voltammetric method for copper(II) ion, various metal ions as potential interferents were tested. The developed method was applied to copper(II) determination in certified reference material, NWRI‐TMDA‐61, trace elements in fortified water.     

Use of complexing reagents as additives to the eluent for optimization of separation selectivity in high-performance chelation ion chromatography

This paper details a study of the selectivity characteristics of high-performance chelation ion chromatography when separating a range of metal ions with a number of complexing eluents. It shows that exploitation of competitive metal complexation between ligands in the eluent and surface bonded chelating groups allows a wide range of control over the retention order and selectivity coefficients of groups of metal ions for specific applications. An indication of the metal separation characteristics found for simple non-complexing eluents on iminodiacetic acid (IDA) silica bonded substrates is given first, followed by an illustration of the selectivity changes that can be achieved by using complexing eluents. Using a novel approach, plots of logbeta(1) of the metal complexes of a chosen eluent ligand against the surface bonded IDA metal complexes were found to be useful indicators of which metals may show unusual selectivity changes during separation. Example chromatograms of metal separations are given for three selected complexing eluent reagents, namely, oxalic acid, picolinic acid, and chloride, either singly or in admixture. For special mention it was found that very specific retention control could be achieved for Cu(II) with picolinic acid, Fe(III) and Fe(II) speciation with oxalic acid, Pb with dipicolinic acid and Cd with chloride.     

The Preparation of a Novel Polymer Film Based on Salicylaldoxime and its Influence on Aqueous Copper Electrochemistry

Abstract

The metal complexing ligand salicylaldoxime was electropolymerised onto platinum electrodes and the resulting film characterised by reflectance FT-IR spectroscopy. The modified electrode response to aqueous iron, copper, cobalt and lead ions was investigated with the iron(III) and copper(II) ions showing significantly altered electrochemistry. The response of the modified electrode towards aqueous copper ion was found to be directly proportional to copper concentration with little interference from lead ions. The retention of copper ions, film stability and the nature of the film action are discussed along with its potential use in sensor construction.     

A neutral, monomeric germanium(I) radical

Stoichiometric reduction of the bulky β-diketiminato germanium(II) chloride complex [((But)Nacnac)GeCl] ((But)Nacnac = [{N(Dip)C(Bu(t))}(2)CH](-), Dip = C(6)H(3)Pr(i)(2)-2,6) with either sodium naphthalenide or the magnesium(I) dimer [{((Mes)Nacnac)Mg}(2)] ((Mes)Nacnac = [(MesNCMe)(2)CH](-), Mes = mesityl) afforded the radical complex [((But)Nacnac)Ge:](?) in moderate yields. X-ray crystallographic, EPR/ENDOR spectroscopic, computational, and reactivity studies revealed this to be the first authenticated monomeric, neutral germanium(I) radical.     

Determination of thallium(I) in solutions containing cations interfering in potentiometric ion-pair formation-based titrations

The possibility of the use of simple potentiometric coated-wire sensors in the analysis of mixtures of ions, the determination of which is based on the ion-pairing principle, was studied. Attention was especially paid on the determination of thallium(I) in the presence of alkali metal ions, mercury(II), copper(II) and silver(I). It was found that thallium(I) can selectively be titrated with sodium tetraphenylborate in diluted solutions. Interferences of ions of the alkali metals are practically negligible if their concentrations are lower than 10(-3) mol dm(-3). Interference of Cu(II) is minimized using EDTA as a masking agent, Hg(II) and Ag(I) ions are sufficiently screened by additions of sodium cyanide. In mixtures containing higher concentrations of alkali metals, thallium(I) can be oxidized to thallium(III) and selectively titrated as TlCl(-)(4) with a cationic titrant.     

Polarographic reduction of germanium

In a previous note the authors had reported the polarographic reduction of ravalent germanium. These observations were confirmed, and full data are presented here which show the two-step reduction of tetravalent germanium under the dropping mercury electrode, from ammoniacal-ammonium chloride solutions.     

Electrodeposition of germanium from supercritical fluids

Several Ge(II) and Ge(IV) compounds were investigated as possible reagents for the electrodeposition of Ge from liquid CH(3)CN and CH(2)F(2) and supercritical CO(2) containing as a co-solvent CH(3)CN (scCO(2)) and supercritical CH(2)F(2) (scCH(2)F(2)). For Ge(II) reagents the most promising results were obtained using [NBu(n)(4)][GeCl(3)]. However the reproducibility was poor and the reduction currents were significantly less than the estimated mass transport limited values. Deposition of Ge containing films was possible at high cathodic potential from [NBu(n)(4)][GeCl(3)] in liquid CH(3)CN and supercritical CO(2) containing CH(3)CN but in all cases they were heavily contaminated by C, O, F and Cl. Much more promising results were obtained using GeCl(4) in liquid CH(2)F(2) and supercritical CH(2)F(2). In this case the reduction currents were consistent with mass transport limited reduction and bulk electrodeposition produced amorphous films of Ge. Characterisation by XPS showed the presence of low levels of O, F and C, XPS confirmed the presence of Ge together with germanium oxides, and Raman spectroscopy showed that the as deposited amorphous Ge could be crystallised by the laser used in obtaining the Raman measurements.     

Comparative study of copper(II) interactions with monomeric ligands and synthetic or natural organic materials from potentiometric data

Potentiometric measurements were used to characterize the complexing properties of (a) a mixture of five monomeric ligands, (b) a synthetic humic-like substance and (c) fulvic acids extracted from soils, with copper (II). In order to compare the binding strengths involved, the same mathematical treatments of the data were used for all measurements. Calculations of the total ligand concentration with the Gran function give underestimated values for the multiligand mixture because of the known presence in the mixture of functional groups with pK^H ; 11 which > cannot be titrated and are revealed only by complexation phenomena. The acid-base properties of the humic substances are better described with a continuous model than with the descrete Henderson-Hasselbach model, because of the inability to distinguish properly between equivalent and independent types of functional groups. In the presence of copper (II), the formation functions show that a mixture of different kinds of complexes with different stability constants is probably formed. Extra protons released during the titration of the various copper (II) systems with alkali are attributed to untitrated functional groups with extremely low protonation constants in the case of the multiligand mixture, but ambiguity remains with the humic substances because their chemical structure is not known. Comparison of binding strengths can be made in terms of global conditional stability constants, by taking into account the three parameters, pH, concentrations of metal and of ligand. It is shown that the mechanisms of complexation are different for monomers and for polymers.     

Spectrophotometric microdetermination of Cu(II) and Fe(III) using 2,4-dinitrosoresorcinol

The colored complexes formed by the reaction of dinitrosoresorcinol with Cu(II) and Fe(III) is utilized for the microdetermination of both metal ions either alone or in a binary mixtures. Satisfactory results are obtained when the proper media are utilized in the presence of an excess of the organic ligand. The interference of some ions is also investigated.     

Metal-ion-complexing properties of 2-(pyrid-2'-yl)-1,10-phenanthroline, a more preorganized analogue of terpyridyl. A crystallographic, fluorescence, and thermodynamic study

Some metal-ion-complexing properties of the ligand 2-(pyrid-2'-yl)-1,10-phenanthroline (MPP) are reported. MPP is of interest in that it is a more preorganized version of 2,2';6,2'-terpyridine (tpy). Protonation constants (pK(1) = 4.60; pK(2) = 3.35) for MPP were determined by monitoring the intense π-π* transitions of 2 × 10(-5) M solutions of the ligand as a function of the pH at an ionic strength of 0 and 25 °C. Formation constants (log K(1)) at an ionic strength of 0 and 25 °C were obtained by monitoring the π-π* transitions of MPP titrated with solutions of the metal ion, or 1:1 solutions of MPP and the metal ion were titrated with acid. Large metal ions such as Ca(II) or La(III) showed increases of log K(1) of about 1.5 log units compared to that of tpy. Small metal ions such as Zn(II) and Ni(II) showed little increase in log K(1) for MPP compared to the tpy complexes, which is attributed to the presence of five-membered chelate rings in the MPP complexes, which favor large metal ions. The structure of [Cd(MPP)(H(2)O)(NO(3))(2)] (1) is reported: monoclinic, P2(1)/c, a = 7.4940(13) ?, b = 12.165(2) ?, c = 20.557(4) ?, β = 96.271(7)°, V = 1864.67(9) ?(3), Z = 4, and final R = 0.0786. The Cd in 1 is seven-coordinate, comprising the three donor atoms of MPP, a coordinated water, a monodentate, and a bidentate NO(3)(-). Cd(II) is a fairly large metal ion, with r(+) = 0.96 ?, slightly too small for coordination with MPP. The effect of this size matching in terms of the structure is discussed. Fluorescence spectra of 2 × 10(-7) M MPP in aqueous solution are reported. The nonprotonated MPP ligand fluoresces only weakly, which is attributed to a photoinduced-electron-transfer effect. The chelation-enhanced-fluorescence (CHEF) effect induced by some metal ions is presented, and the trend of the CHEF effect, which is Ca(II) > Zn(II) > Cd(II) ~ La(III) > Hg(II), is discussed in terms of factors that control the CHEF effect, such as the heavy-atom effect.