Flow Injection Amperometric Analysis of H2O2 at Platinum Nanoparticles Modified Pencil Graphite Electrode

A Pt nanoparticle modified Pencil Graphite Electrode (PGE) was proposed for the electrocatalytic oxidation and non‐enzymatic determination of H₂O₂ in Flow Injection Analysis (FIA) system. Platinum nanoparticles (PtNPs) electrochemically deposited on pretreated PGE (p.PGE) surface by recording cyclic voltammograms of 1.0 mM of H₂PtCl₆ solution in 0.10 M KCl at scan rate of 50 mV s⁻¹ for 30 cycles. Cyclic voltammograms show that the oxidation peak potential of H₂O₂ shifts from about +700 mV at bare PGE to +50 mV at PtNPs/p.PGE vs. Ag/AgCl /KCl (sat.). It can be concluded that PtNPs/p.PGE exhibits a good electrocatalytic activity towards oxidation of H₂O₂. Then, FI amperometric analysis of H₂O₂ was performed under optimized conditions using a new homemade electrochemical flow cell which was constructed for PGE. Linear range was found as 2.5 μM to 750.0 μM H₂O₂ with a detection limit of 0.73 μM (based on S_b/m of 3). As a result, this study shows the first study on the FI amperometric determination of H₂O₂ at PtNPs/p.PGE which exhibits a simple, low cost, commercially available, disposable sensor for H₂O₂ detection. The proposed electrode was successfully applied to determination of H₂O₂ in real sample.     

Voltammetric Determination of Oxybutynin Hydrochloride Utilizing Pencil Graphite Electrode Decorated with Gold Nanoparticles

A novel voltammetric method was successfully applied for the determination of an anticholinergic drug, oxybutynin hydrochloride (OXB). The method is concerned with electrooxidation of the drug on the surface of pencil graphite electrode (PGE). In order to enhance the electrode sensitivity and peak current, the electrode was coated with gold nanoparticles (Au-NPs) via electrochemical deposition using cyclic voltammetry from gold salt solution. The surface of Au-NPs modified PGE has been characterized using scanning electron microscopy and X-ray photoelectron spectroscopy. Various experimental variables were studied and optimized to enhance the sensor's response towards OXB. Quantitative determination of the drug was achieved in phosphate buffer pH 7.5 using differential pulse voltammetry by scanning the potential over range of 0.00 to 2.20 V with scan rate of 40 mV s⁻¹. Validation of the method was achieved according to ICH guidelines. The method was found to be linear over concentration range (2.0×10⁻⁷–1.0×10⁻⁶ M). The suggested sensor was efficiently developed for the quantitative determination of OXB in pure form, pharmaceutical dosage form and spiked plasma samples.     

快速循环伏安法及其近期发展

对超微电极快速循环伏安法作了综述。讨论了该法的主要原理、特点和仪器关键性部分。并扼要介绍其主要应用。     

快扫描循环伏安法及其在电化学中的应用

本文介绍了快扫描循环伏安法及其特点,对这一方法在电化学及电分析化学中的应用作了评述。     

An Enzyme‐free H2O2 Sensor Based on Poly(2‐Aminophenylbenzimidazole)/Gold Nanoparticles Coated Pencil Graphite Electrode

A poly(2‐aminophenylbenzimidazole)/gold nanoparticles (P2AB/AuNPs) coated disposable pencil graphite electrode (PGE) was fabricated as an enzyme‐free sensor for the H₂O₂ determination. P2AB/AuNPs and P2AB were successfully synthesized electrochemically on PGE in acetonitrile for the first time. The coatings were characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, Energy‐dispersive X‐ray spectroscopy, Surface‐enhanced Raman spectroscopy, and UV‐Vis spectroscopy. AuNPs interacted with P2AB as carrier enhances the electrocatalytic activity towards reduction of H₂O₂. The analytical performance was evaluated in a 100 mM phosphate buffer solution at pH 6.5 by amperometry. The steady state current vs. H₂O₂ concentration is linear in the range of 0.06 to 100 mM (R²=0.992) with a limit of detection 3.67×10^?5 M at ?0.8 V vs. SCE and no interference is caused by ascorbic acid, dopamine, uric acid, and glucose. The examination for the sensitive determination of H₂O₂ was conducted in commercially available hair oxidant solution. The results demonstrate that P2AB/AuNPs/PGE has potential applications as a sensing material for quantitative determination of H₂O₂.     

Voltammetric Study of Aminopurines on Pencil Graphite Electrode in the Presence of Copper Ions

Electrochemical oxidations of aminopurines (adenine, 2‐aminopurine, 2,6‐diaminopurine) and their complexes with Cu(I) on a pencil graphite electrode were investigated by means of linear sweep voltammetry (LSV) and elimination voltammetry with linear scan (EVLS). The anodic process of the Cu(I)‐aminopurine complex, corresponding to the oxidation of Cu(I) to Cu(II), takes place in the potential range between 0.4 and 0.5 V (vs. Ag/AgCl/3 M KCl). At more positive potentials the aminopurines provide voltammetric peaks resulting from the oxidation of the purine ring. The stability of the accumulated complex layer was investigated by the adsorptive transfer stripping technique.     

Monitoring of Methyldopa by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of methyldopa at gold micro electrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorpted at 400 mV, giving rise to change in the current of well-defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest one of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal-to-noise ratio has significantly increased by application of discrete Fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10－7—1.0×10－11 mol•L－1 (r＝0.9975) with a limit of detection and quantitation 0.004 nmol•L－1 and 0.03 nmol•L－1, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay methyldopa in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the methyldopa were considered.     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.     

Monitoring of Anti Cancer Drug Letrozole by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of letrozole at gold microelectrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorbed at ?200 mV, giving rise to change in the current of well‐defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal‐to‐noise ratio has significantly increased by application of discrete Fast Fourier Transform (FFT) method, background subtraction and two‐dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10^?7?1.0×10^?10 mol/L (r=0.9975) with a limit of detection and quantitation 0.08 nmol/L and 0.15 nmol/L, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay letrozol in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the letrozol were considered.     

Hydroxyapatite Nanoparticles Modified Graphite Electrodes for Electrochemical DNA Detection

Hydroxyapatite nanoparticles (HaNP) modified pencil graphite electrodes (PGEs) were developed for the first time in the literature, and accordingly they were applied for electrochemical monitoring of sequence‐selective DNA hybridization. The experimental conditions for HaNP modification of PGE, and DNA hybridization related to Hepatitis B Virus (HBV) DNA sequence were optimized. The microscopic and electrochemical characterization of HaNP‐PGE in contrast to the unmodified one was utilized. Under optimized experimental conditions, the selectivity of HBV DNA probe immobilized biosensor was tested against to non‐complementary (NC), mismatch (MM) sequences and the mixture of target:NC (1 : 1) or target: MM (1 : 1).     

Disposable Pencil Graphite Electrode for Ciprofloxacin Determination in Pharmaceutical Formulations by Square Wave Voltammetry

In this work, a new electrochemical sensor based on pencil graphite with interesting features, such as low cost (US$ 0.01 per electrode), ease manufacture, and portability was developed. The sensor showed an adequate manufacturing reproducibility with RSD <5.3 %. Under this electrochemical platform, ciprofloxacin underwent an irreversible oxidation process at 1.03 V, characterized by the diffusion of electroactive species. A simple method by square wave voltammetry (SWV) has been optimized for the determination of ciprofloxacin in pharmaceutical formulations using a pencil graphite electrode (PGE). The method showed satisfactory analytical performance, with a wide linear range (12 to 55 μmol L⁻¹), low detection limit (5.6 μmol L⁻¹), adequate precision (RSD <3.2 %), and accuracy with an average recovery of (102±15)%. Samples of pharmaceutical formulations were evaluated, obtaining levels of ciprofloxacin close to those established by the manufacturers. In addition, the samples were analyzed by liquid chromatography and there was no significant difference between the methods at the 95 % confidence level. In this sense, the method developed proved to be reliable and promising for the quality control of pharmaceutical formulations.     

Fast Fourier Continuous Cyclic Voltammetry at Gold Ultramicroelectrode in Flowing Solution for Determination of Ultra Trace Amounts of Penicillin G

In this work, for the first time a fast continuous cyclic voltammetry was used as a highly sensitive detection method for Penicillin G in a flow‐injection system. A special computer‐based numerical calculation method (using Fast Fourier Transformation) is introduced here for enhancing the analyte signal and noise reduction. During the measurements, the potential waveform (consists of potential steps for cleaning, stripping and potential ramp) was continuously applied on an Au disk microelectrode (with a radius 12.5 μm in radius). The stripping time was less than 200 ms. Effects of rest potential, sweep rate, and delay time on the sensitivity of the method were investigated. The limit of detection of the method was 1.0 × 10^?11 M. The detection limit of the method is 660 times lower than the most sensitive reported method. The relative standard deviation of the method at 1.0×10^?7 M of Penicillin G was 2.7% for 10 runs.     

A Pencil Graphite Electrode In Situ Modified by Monovalent Copper: a Promising Tool for the Determination of Methylxanthines

A pencil graphite electrode (PeGE) exhibits a promising tool for the electrochemical analysis of xanthine (Xan) and its N‐methyl derivatives (1‐, 3‐, 7‐ and 9‐mXan). The changes in their level in blood, serum, urine, as products of purine catabolism, can indicate the development of some diseases. Sensitivity‐enhanced voltammetric detection of mXans was achieved by forming of complex with Cu(I) and application of elimination procedure. The Cu(I)‐mXan complex was identified by means of titration of electrochemically produced cuprous ions by mXan. Our approach enables separation of overlapped mXan oxidation signals. Based on the obtained results, we found that the effect of methyl group position on the xanthine skeleton was significant and it was also discussed.     

Electrochemical Behaviors of Single Gold Nanoparticles

In this paper, the electrochemical behaviors of a single gold nanoparticle attached on a nanometer sized electrode have been studied. The single nanoparticle was characterized by using electrochemical methods. Since there is only one nanoparticle on the electrode, unarguable information for that sized particle could be obtained. Our preliminary results show that it becomes more difficult to oxidize gold nanoparticle or reduce gold nanoparticle oxide as the radius of the particle becomes smaller. Also, the peak potential of the reduction of gold nanoparticle oxide is proportional to the reciprocal of the radius of the particle.     

肾上腺素电氧化过程的快速扫描循环伏安研究

以快速循环伏安法为主要手段,研究了肾上腺素电化学氧化反应机理.肾上腺素在1 m ol•dm－3 H2SO4中的电化学氧化反应,具有扩散控制的基本特征,并伴随着电活性质粒的 弱吸附现象.在快速电势扫描条件下,肾上腺素电氧化过程遵从EC反应机理.当肾上腺素浓度低于1.00×10－3 mol•dm－3时,吸附现象的特征趋于显现出来;在快速电势扫描速率下,电活性质粒吸附的特征更加明显.结合表面伏安法分析,估算了肾上腺素电氧化过程的传递系数α=0.264.电化学反应速率常数ks=31.81 s－1.     

Underpotential Deposition Study and Determination of Bismuth on Gold Electrode by Using Voltammetry

ＴｈｅｃｏｍｂｉｎａｔｉｏｎｏｆｓｔｒｉｐｐｉｎｇｖｏｌｔａｍｍｅｔｒｙｗｉｔｈＵＰＤｃａｎｌｅａｄｔｏｔｈｅｉｍｐｒｏｖｅｍｅｎｔｏｆｓｅｎｓｉｔｉｖｉｔｙ ,ｓｅｌｅｃｔｉｖｉ ｔｙａｎｄｒｅｖｅｒｓｉｂｉｌｉｔｙｆｏｒｅｌｅｃｔｒｏａｎａｌｙｔｉｃａｌｐｕｒｐｏｓｅａｎｄａｖｏｉｄｔｈｅｕｓｅｏｆｔｏｘｉｃｍｅｒｃｕｒｙａｓｔｈｅｗｏｒｋｅｌｅｃｔｒｏｄｅ1ａｎｄｔｈｅｎａｎａｌｙｔｉｃａｌａｐｐｌｉｃａｔｉｏｎｓｈａｖｅｂｅｅｎｄｅｓｃｒｉｂｅｄ .2 4 Ｉｎｔｈｉｓｗｏｒｋ ,ｗｅｄｅｖｅｌｏ…     

锰欠电位沉积的密度泛函计算与循环伏安实验的研究

用密度泛函计算和循环伏安法研究了锰在金和铅表面的欠电位沉积(UPD)行为. 理论计算, 假设生成紧密的二维相(2D)欠电位沉积层, 用基于密度泛函理论的DMol3软件计算在金与铅表面生成2D相锰层的欠电位偏移值&#8710;fE2DMe, 证明锰在金表面可发生欠电位沉积, 而在铅表面不能发生欠电位沉积. 循环伏安实验结果与理论计算不一致: 金电极析氢电位高不利于研究锰的还原沉积反应, 没有发现锰的欠电位沉积现象; 铅电极在MnCl2溶液中有锰的欠电位沉积现象. 这种理论计算与电化学实验结果的差异, 主要是因为理论计算没有考虑溶剂与阴离子特性吸附作用的影响, 理论计算模型是电化学实验体系的一种理想模型.     

Voltammetry of Benzo[a]pyrene in Aqueous and Nonaqueous Media: Adsorptive Stripping Voltammetric Determination at Pencil Graphite Electrode

A detailed study of the electrochemical oxidation of Benzo[a]pyrene (BaP) at the glassy carbon and pencil graphite electrodes was carried out in aqueous and nonaqueous media. Using square‐wave stripping mode, the compound yielded a well‐defined voltammetric response at pencil graphite electrode in acetate buffer, pH 4.8 at +1.13 V (vs. Ag/AgCl) (a preconcentration step being carried out at a fixed potential of +0.70 V for 180 s). The process could be used to determine BaP concentrations in the range 0.25–1.25 μM, with a detection limit of 0.027 μM (6.82 μg L^?1). The applicability to assay of spiked human urine samples was also illustrated.     

Gold Nanoelectrode Arrays and their Evaluation by Impedance Spectroscopy and Cyclic Voltammetry

A sol–gel strategy is developed to fabricate highly regular Au nanoelectrode arrays (NEAs) consisting of a nanoperforated ultrathin membrane of ZrO₂, which exhibits a well‐ordered array of pores (65±5) nm in diameter with a mean center‐to‐center distance of (110±10) nm, on a polycrystalline gold surface. The structural properties are investigated by field‐emission scanning electron microscopy (FE‐SEM), while grazing incidence small‐angle X‐ray scattering (GISAXS) is used to assess the thickness homogeneity and the period of the array of electrodes. In addition, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are carried out to describe quantitatively the accessibility, electrochemical behavior, and diffusion processes of the gold NEA. A model applying parameters obtained from FE‐SEM, CV, and EIS analyses is proposed to simulate the experimental results. A fairly good agreement between the experimental and the simulated data is obtained, thus allowing the deconvolution of the different diffusion regimes at the NEA.     

Fabrication of a Sensitive Impedance Biosensor of DNA Hybridization Based on Gold Nanoparticles Modified Gold Electrode

In this work, we report on the preparation of a simple, sensitive DNA impedance sensor. Firstly gold nanoparticles were electrodeposited on the surface of a gold electrode, and then probe DNA was immobilized on the surface of gold nanoparticles through a 5′‐thiol‐linker. Electrochemical impedance spectroscopy (EIS) was used to investigate probe DNA immobilization and hybridization. Compared to the bare gold electrode, the gold nanoparticles modified electrode could improve the density of probe DNA attachment and the sensitivity of DNA sensor greatly. The difference of electron transfer resistance (ΔR_et) was linear with the logarithm of complementary oligonucleotides sequence concentrations in the range of 2.0×10^?12 to 9.0×10^?8 M, and the detection limit was 6.7×10^?13 M. In addition, the DNA sensor showed a fairly good reproducibility and stability during repeated regeneration and hybridization cycles.