Emission intensity of cesium in flames of various gas compositions

The emission intensity of cesium at 852.1 nm has been studied in hydrogen flames burning with various mixtures of oxygen and nitrogen. A significant maximum was observed in the relative emission intensity of cesium at an oxygen to nitrogen ratio of 3:2 in the aspirating gas. The effect of Rb⁺, K⁺, Li⁺, Na⁺, and NH₄⁺ ions on cesium emission is much less pronounced in this optimum flame than in a pure oxy-hydrogen flame. The optimum flame (60% oxygen) yields a significantly better calibration curve than can be obtained in either the normal air-hydrogen or oxyhydrogen flame for 0–12 p.p.m. cesium concentrations; the graph is linear over this concentration range.     

TPR investigations on the reducibility of Cu supported on Al2O3, zeolite Y and SAPO-5

Reducibility of Cu supported on Al₂O₃, zeolite Y and silicoaluminophosphate SAPO-5 has been investigated in dependence on the Cu content using a method combining conventional temperature programmed reduction (TPR) by hydrogen with reoxidation in N₂O followed by a second the so-called surface-TPR (s-TPR). The method enables discrimination and a quantitative estimation of the Cu oxidation states +2, +1 and 0. The quantitative results show that the initial oxidation state of Cu after calcination in air at 400 °C, independent on the nature of the support, is predominantly +2. Cu²⁺ supported on Al₂O₃ is quantitatively reduced by hydrogen to metallic Cu⁰. Comparing the TPR of the samples calcined in air and that of samples additionally pre-treated in argon reveals that in zeolite Y and SAPO-5 Cu²⁺ cations are stabilized as weakly and strongly forms. In both systems, strongly stabilized Cu²⁺ ions are not auto-reduced by pre-treatment in argon at 650 °C, but are reduced in hydrogen to form Cu⁺. The weakly stabilized Cu²⁺ ions, in contrast, may be auto-reduced by pre-treatment in argon at 650 °C forming Cu⁺ but are reduced in hydrogen to metallic Cu⁰.     

Further improvements in the 2,4-xylenol spectrophotometric method for nitrate

Improvements are described for the 2,4-xylenol spectrophotometric method for nitrate that reduce the elapsed and working time. Diluted (22 + 3) sulfuric acid is added quickly to the sample solution while the flask is immersed in tap water. 2,4-xylenol solution is added, the 6-nitro-2,4-xylenol formed is steam-distilled into a composite ammonia—isopropanol reagent, and the absorbance of the ammonium salt of 6-nitro-2,4-xylenol is measured. Further possible interferences are described. Br₂, I₂, ClO^-, CIO₃^-, BrO₃^-, and I0₄^-, cause low results by deactivating or destroying the 2,4-xylenol. Azide, hydrazine, and elemental carbon cause low results by reducing the nitrate in the strong sulfuric acid solution. Se⁺ causes low results because 2,4-xylenol is consumed in reducing Se⁴⁺ to the element. Pt⁴⁺ and Os⁸⁺ cause high results. Interferences from Br₂, I₂, ClO^-, ClO₃^- lO₃^-, and I0₄^- can be eliminated by reduction to the halide with sulfurous acid and precipitation with silver sulfate. Sulfurous acid reduction also eliminates interferences from V⁵⁺. Mn⁷⁺, Cr⁶⁺, S₂O₈^2-, and H₂0₂. Interferences from N₃^-, Br₂, I₂, and S₂0₈^2- are eliminated merely by boiling a 0.5% sulfuric acid solution for 30 min (and precipitating any residual halide with silver sulfate).     

Combination of cool plasma and collision-reaction interface for correction of polyatomic interferences on copper signals in inductively coupled plasma quadrupole mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is an important instrumental technique for elemental analysis. However, some elements suffer from spectral interferences caused by ions derived from argon plasma gas and matrix components. The determination of copper isotopes is affected by ⁴⁰Ar²³Na⁺ and ⁴⁰Ar²⁵Mg⁺. The performance of an ICP-MS with a collision reaction interface (CRI) and cool plasma conditions for correction of spectral interferences was evaluated here. The efficiency of the CRI was studied introducing H₂ or He through sampler and skimmer cones. Gas introduction through the sampler cone was ineffective. Complete elimination of spectral interferences was reached when introducing 60 or 80 mL min⁻¹ of H₂ in the skimmer cone, but sensitivity losses were as large as 99%. Further, the effect of interferences was checked when the argon plasma was operated under cool plasma conditions. The effects of the applied radiofrequency (0.6, 0.8, 0.9, and 1.0 kW), sampling depth (5.5, 8.5 and 11.5 mm), and dwell time (25 and 50 ms) were studied considering interference reduction and sensitivities. Best conditions were reached at 0.8 kW. Subsequently, both CRI and cool plasma conditions were combined to evaluate their performance on reduction of polyatomic Na and Mg argide interferences. Spectral interferences were eliminated using a CRI with 20 mL min⁻¹ H₂ introduced through the skimmer cone, cool plasma conditions at 0.8 kW and sampling depth of 8.5 mm. This work demonstrated the feasibility of combining CRI and cool plasma for circumventing some spectral interferences on Cu determination by ICP-QMS.     

Enhanced photoluminescence of Ba2GdNbO6: Eu/Dy phosphors by Li doping

The Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors were prepared by solid-state reaction process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and photoluminescence (PL) as well as lifetimes, was utilized to characterize the resulting phosphors. Under the excitation of ultraviolet light, the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ show the characteristic emissions of Eu³⁺ (⁵D₀-⁷F_1,2,3 transitions dominated by ⁵D₀-⁷F₁ at 593 nm) and Dy³⁺ (⁴F_9/2-⁶H_15/2,_13/2 transitions dominated by ⁴F_9/2-⁶H_15/2 at 494 nm), respectively. The incorporation of Li⁺ ions into the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors has enhanced the PL intensities depending on the doping concentration of Li⁺, and the highest emission was obtained in Ba₂Gd_0.9NbO₆: 0.10Eu³⁺, 0.01Li⁺ and Ba₂Gd_0.95NbO₆: 0.05Dy³⁺, 0.07Li⁺, respectively. An energy level diagram was proposed to explain the luminescence process in the phosphors.     

Organic solvents as interferents in arsenic determination by hydride generation atomic absorption spectrometry with flame atomization

Interference effects of various organic solvents miscible with water on arsenic determination by hydride generation atomic absorption spectrometry have been studied. Arsine was chemically generated in continuous flow hydride generation system and atomized by using a flame atomizer able to operate in two modes: miniature diffusion flame and flame-in-flame. The effects of experimental variables and atomization mode were investigated: tetrahydroborate and hydrochloric acid concentrations, argon, hydrogen and oxygen supply rates for the microflame, and the distance from the atomization region to the observation zone. The nature of the species formed in the flame due to the pyrolysis of organic solvent vapors entering the flame volume together with arsine is discussed. The observed signal depression in the presence of organic solvents has been mainly attributed to the atomization interference due to heterogeneous gas–solid reaction between the free arsenic atoms and finely dispersed carbon particles formed by carbon radicals recombination. The best tolerance to interferences was obtained by using flame-in-flame atomization (5–10 ml min^− 1 of oxygen flow rate), together with higher argon and hydrogen supply rates and elevated observation heights.     

Crystal Structure of Cesium-Sodium Molybdate Dihydrate

Structure of CsNaMoO₄ · 2H₂O crystals formed in Cs₂MoO₄–Na₂MoO₄–H₂O system is determined by X-ray diffraction study. The unit cell parameters a = 6.379(2) Å, b = 8.631(2) Å, c = 13.670(2) Å, V = 752.6(3) ų, Z = 4, M = 351.87, (calcd) = 3.105 g/cm³, space group P2₁2₁2₁. The isle crystal structure is built of MoO₄ ^2-, Cs⁺, and Na⁺ ions. The Mo–O bond lengths lie within 1.756(2)–1.769(3) Å range. The OMoO bond angle is 109.45° on average. Three oxygen atoms of MoO₄ ^2- anion are involved in hydrogen bonds with water molecules., while the fourth O atom participates in the formation of Na polyhedra only. The octahedral environment of Cs⁺ ions is formed by oxygen atoms of MoO₄ ^2- anions, without participation of water molecules. The structure contains two crystallographically independent water molecules, whose tetrahedral coordination consists of two Na⁺ ions and two MoO₄ ^2- anions.     

Spectrophotometric determination of uranium(vi) by the azide reaction

Azide has been investigated as a spectrophotometric reagent for uranium(VI). The system is more sensitive than the thiocyanate reaction. It obeys Beer's law in the range 2–180 p.p.m. of uranium. The colour is sensitive to hydrogen ion concentration ; maximum absorbance and stability are attained at pH 5–5.5. Iron(III) interferes seriously, but can be masked by EDTA. Fe⁺², Cr⁺³, Ni⁺², Th⁺⁴, Cr₂O₇^-2, WO₄^-2, VO₃^- and F^- interfere. The deep yellow colour cannot be extracted with organic solvents. A mono-azido-uranium(Vl) ion is present in dilute solutions; its dissociation constant is 2.3 ±20.27·10^-3.     

Ion-etching of discharge-produced tetrafluoroethylene film with hydrogen,oxygen and noble gases. A mass spectrometric analysis

Freshly deposited discharge-produced tetrafluoroethylene films were ion-etched with either helium, neon, argon, oxygen or hydrogen. The ions C⁺, CF⁺, CF₂⁺ and CF₃⁺ comprised most of the positive ions in rare gas discharges, with CF⁺ always dominant. Sputtered fragments containing two or more carbon atoms were rare. These findings are compatible with the ion-etching of a highly crosslinked polymer film. Residual background gases were contributed to 1–3% of the total ion flux even though their actual partial pressures were very low. The concentration of neutral species corresponding to the ions observed was less than one part in ten thousand of the etching gas. With pure hydrogen, very little etching occurred and the degree of ionization relative to the rare gases was low. The principal reaction was the abstraction of fluorine from the polymer to give hydrogen fluoride and a more highly crosslinked film. Oxygen containing discharges produced the largest total yield of all the systems studied and the most evidence of chemical attack on the polymer. The ions observed were CO⁺, CO₂⁺, COF⁺, COF₂⁺ as well as C⁺, CF⁺, CF₂⁺ and CF₃⁺. Thus oxygen etches the polymer by preferentially attacking the carbon-carbon framework.     

Activity coefficients and pitzer parameters in the systems Na+/Cs+/Cl-/TcO 4 - or ClO 4 - /H2O at 25°C

Isopiestic vapor pressure experiments are performed at 25°C with aqueous NaTcO₄, mixed NaTcO₄-NaCl, and NaCl reference solutions. The solubility of CsTcO₄ is determined in 0–7.4m CsCl and in 0–5.6m NaCl solutions. The osmotic coefficients of the binary and ternary solutions are used to evaluate the binary Pitzer parameters Β⁰, Β^l, and C^Φ for NaTcO₄ and the mixing parameters θ_{TcO 4} ^- /cl^- and ψ_Na ⁺/TcO ₄ ^- /cl^-. The binary Pitzer parameters for the sparingly soluble CsTcO₄ and CsC1O₄ are calculated together with ψ_Cs ⁺/mo ₄ ^- /cl^- from their solubilities in CsCl solution. The solubilities of CsTcO₄ in NaCl and CsClO₄ in NaClO₄ solution are also included in the parametrization of the reciprocal salt systems Na⁺/Cs⁺/Cl^-/MO ₄ ^- . The parameters Β⁰ and Β^l of pertechnetate and perchlorate salts correlate well with the ionic radii.     

Hydrogen bonding between a water molecule and electronegative additives (O or Cl) on a Pt(111) surface

Water adsorption on Pt(111) surfaces treated with oxygen or hydrogen chloride at 20 K has been studied by Fourier transform infrared spectroscopy and scanning tunneling microscopy. Water molecules chemisorb predominantly on the sites of the electronegative additives (O or Cl^-), forming hydrogen bonds of O-HO or O-HCl^-. On a Pt(111)-2×2-O surface, water adsorption produces species (O(D₂O)), monomeric water (D₂O), (O(D₂O)₂) and ring tetramer-like cluster (O(D₂O)₃) on a Pt(111) surface. On a Pt(111)-3×3-Cl^- (θ=0.44) surface, water adsorption gives rise to a Pt(111)-(4×2)-(H₃O⁺+Cl^-) co-adsorption structure to form a hydrogen-bonding network between Cl^- and H₃O⁺ ions.     

液相OH•, NO3•和SO4•-与二甲基硫反应机理

利用激光闪光光解技术研究了液相二甲基硫(DMS)与OH^•, NO₃^•和SO₄^•-自由基的微观反应机理. 实验结果表明: 在pH 5～9时, OH^•氧化DMS生成DMSOH^•, DMSOH^•会与DMS反应生成(DMS)₂⁺; 而NO₃^•和SO₄^•-;会直接氧化DMS生成DMS^＋, 生成的DMS^＋会与DMS反应生成(DMS)₂⁺.(DMS)₂⁺与氧气的反应很慢, 它的衰减受pH影响较大.     

Inorganic interferences in the 2,4-xylenol spectro-photometric method for nitrate and their elimination

A study of inorganic interferences with the 2,4-xylenol spectrophotometric method for nitrate and their elimination is reported. Fifty-three substances do not interfere with the original method. Nitrite interferes somewhat by producing a faint yellow color. Certain reducing agents (Fe²⁺, S^2-, S₂O₃^2-, and SCN^-) cause low results by reducing the nitrate in the strong sulfuric acid solution, while some oxidizing agents (Mn⁷⁺, Cr⁶⁺, V⁵⁺, and ClO₃^-) cause low results by inactivating or destroying the 2,4-xylenol. Persulfate and small amounts of H₂O₂ produce a slight deepening of the color; larger amounts of H₂O₂; cause low results, as do Cl^-, Br^-, I^-, and metals. The recommended maximum permissible limits (mg per 10-ml aliquot) for the original method are NO₂^--N, Fe²⁺, S^2-, SCN^-, V⁵⁺, ClO₃^-, Cl^-, I^-, 0.2; Mn⁷⁺, Cr⁶⁺, S₂O₈^2-, 5; H₂O₂, 0.02; S₂O₃^2-, Br^-, 0.1; metals, none. Procedures for the elimination of most of the interferences are described. Nitrite is destroyed with sulfamic acid. The interferences of reductants (Fe²⁺, S^2-, S₂O₃^2-, and SCN^-) and oxidants (Mn⁷⁺ and Cr⁶⁺) are eliminated with hydrogen peroxide, the excess of which (and S₂O₈^2-) is destroyed by boiling in the presence of Fe³⁺. The interference of Cl^-, Br^-, and I^- is eliminated by precipitation with silver sulfate. An alternative to the sulfamic acid procedure is to oxidize nitrite to nitrate with peroxide and deduct NO₂^--N from the total NO₃^--N. After elimination of interferences, a 10-ml aliquot of sample solution is treated with 17.0 ml of sulfuric acid and 2,4-xylenol, the 6-nitro-2,4-xylenol is steam-distilled into an ammonia—water—isopropanol mixture, and the yellow color is measured.     

Iron(II) sulfate oxidation with oxygen on a Pt/C catalyst: A kinetic study

The kinetics of iron(II) sulfate oxidation with molecular oxygen on the 2% Pt/Sibunit catalyst was studied by a volumetric method at atmospheric pressure, T = 303 K, pH 0.33–2.4, [FeSO₄] = 0.06?0.48 mol/l, and [Fe₂(SO₄)₃] = 0?0.36 mol/l in the absence of diffusion limitations. Relationships were established between the reaction rate and the concentrations of Fe²⁺, Fe³⁺, H⁺, and Cl^? ions in the reaction solution. The kinetic isotope effect caused by the replacement of H₂O with D₂O and of H⁺ with D⁺ was measured. The dependence of Fe²⁺ and Fe³⁺ adsorption on the catalyst pretreatment conditions was studied. A reaction scheme is suggested, which includes oxygen adsorption, the formation of a Fe(II) complex with surface oxygen, and the one-electron reduction of oxygen. The last step can proceed via two pathways, namely, electron transfer with H⁺ addition and hydrogen atom transfer from the coordination sphere of the iron(II) aqua complex. A kinetic equation providing a satisfactory fit to experimental data is set up. Numerical values are determined for the rate constants of the individual steps of the scheme suggested.     

The determination of nitrite by ultraviolet absorption spectrometry in the gas phase

Aliquots of nitrite-containing solutions are injected into small aliquots of 8 M hydrochloric acid and the evolved gases are swept by a stream of carrier gas through an absorption cell where transient absorbance in the gas phase is measured at 195 nm. The detection limit is 0.2 μg NO₂^- ml^-1 with the calibration curve remaining linear to 65 μg NO₂^- ml^-1 Reproducibility is reflected in 2.4% relative standard deviation from the mean at the 5 μg NO₂^- ml^-1 level. There is no interference from CO₃^2-, NO₃^-, SO₄^2-, Br^-, CN^-, CNO^-, or NH₄⁺, but SCN^-, I^-, S^2- and SO₃^2- interfere.     

Application of a hexapole collision and reaction cell in ICP-MS Part I: Instrumental aspects and operational optimization

The application of an ion-guiding buffer gas-filled hexapole collision and reaction cell in ICP-MS has been studied in order to give a preliminary performance characterization of a new instrument providing this feature for increasing the ion yield and decreasing contributions from Ar induced interfering molecular ions. As buffer gas He was used while H₂ served as reaction gas. Addition of the latter can be an effective means for reduction of typical argon induced polyatomic ions (Ar⁺, ArO⁺, Ar₂ ⁺) by orders of magnitude owing to gas phase reactions. Molecular interferences generated in the cell can be suppressed by a retarding electric field established by a dc hexapole bias potential of –2 V. Received: 10 May 1999 / Revised: 4 June 1999 / Accepted: 12 June 1999     

On the chemical resolution of the 87Rb+ (s0)/87Sr+ (s1) isobaric interference: a kinetic search for an optimum reagent

Room-temperature reactions of the atomic cations Sr⁺ and Rb⁺ have been surveyed systematically with a variety of gases using an Inductively-Coupled Plasma/Selected-Ion Flow Tube (ICP/SIFT) tandem mass spectrometer. Rate coefficients and product distributions have been measured in He buffer gas at 0.35 Torr and 295 K for reactions of Sr⁺ and Rb⁺ with CH₃F, CH₃Cl, N₂O, CO₂, CS₂, SF₆, D₂O and NH₃. Rb⁺ (s⁰) is seen to be quite inert with these molecules and reacts either slowly by molecule addition or not at all, while Sr⁺ (s¹) is much more reactive with all these 8 molecules, especially with CH₃F, CH₃Cl, N₂O and SF₆. Sr⁺ reacts with CH₃F and SF₆ by F-atom transfer, with CH₃Cl by Cl-atom transfer and with N₂O by O-atom transfer, and the reaction rate coefficients are all quite high, k ≥ 1.4 × 10⁻¹¹ cm³ molecules⁻¹ s⁻¹. The extreme differences in reactivity with CH₃F, SF₆, CH₃Cl and N₂O provide a chemical basis for the separation of isobaric interferences of ⁸⁷Rb⁺ and ⁸⁷Sr⁺ often encountered in ICP-MS. Among these four molecules, SF₆ exhibits the largest difference in reactivity, almost a factor of 10⁴, and so is identified as the kinetically recommended reagent for the chemical resolution of the isobaric interference of ⁸⁷Rb⁺ and ⁸⁷Sr⁺.     

Fe3O4@SiO2@TiO2-Co/rGO磁性光催化剂的合成及其光催化活性研究

采用溶胶-凝胶法和水热法（HTM）合成了Fe₃O₄@SiO₂@TiO₂-Co/rGO复合纳米粒子（磁性光催化剂）,通过X射线衍射、扫描电子显微镜及其能量分散光谱和UV-vis漫反射光谱对产物进行了表征分析.研究了Co掺杂量、溶液pH值、亚甲基蓝（MB）溶液初始浓度以及干扰离子（例如Cl^-、SO₄^2-、CO₃^2-）等因素对MB降解的影响,并对磁性光催化剂的可重复使用性进行了分析.正常实验条件下（pH=7,[MB]=10 mg/L,磁性光催化剂用量=0.1 g/50 mL）,150 min内MB最大去除率达到98.24%.干扰离子影响MB降解次序为CO₃^2- < Cl^- < SO₄^2-,磁性光催化剂重复使用7次MB光降解率仅下降7.07%,新型磁性光催化剂具有良好的MB降解性能和较高的重复使用性能.     

Contribution to the Protonation of a Calix[4]arene: DFT Calculated Structure of Protonated p-tert -Butylcalix[4]arenetetrakis( N , N -diethylacetamide)

By using DFT calculations, the most probable structure of the p-tert-butylcalix[4]arenetetrakis(N,N-diethylacetamide) · H₃O⁺ complex species was derived. In this complex, the hydroxonium ion H₃O⁺ is predominantly bound by strong hydrogen bonds to three phenoxy oxygens of the ligand and partly to the remaining phenoxy oxygen atom by two somewhat weaker hydrogen bonds. Besides, the H₃O⁺ cation is also bound to two carbonyl oxygens of the mentioned ligand by further two weaker hydrogen bonds.     

Organophosphorus acid interferences in flame atomic absorption spectrometry

The interference of the organophosphorus acids, 1-hydroxyethane-1,1-bisphosphonic acid, aminotris(methylenephosphonic acid), ethylenediaminetetrakis(methylenephosphonic acid) and hexamethylenediaminetetrakis(methylenephosphonic acid) on the determination of eighteen metal ions by flame atomic absorption spectrometry is reported. Comparisons with the effect of orthophosphoric acid reveal similarities and distinct differences in their interfering effects. In the air/acetylen flame, depressive interferences are attributed to the formation of phosphates, M₃(PO₄)₂, or hydroxynpatite-like compounds, M₅(OH)(PO₄)₃, in the flame aerosol particles for Mg, Ca, Sr, Ba, Mn, Co and Ni. Iron(III) and chromium(III) appear to form stable oxide phosphates, M₂O₃?MPO₄ or M₃O₄?MPO₄. Evidence for the formation of stable molybdenum carbides, MoC and MoC₂, is also presented. In the nitrous oxide/acetylene flame, serious interferences perssisted only for molybdenum but were eliminated by the addition of sodium sulphate.