Determination of phosphonoformic acid in human plasma and urine by high-performance liquid chromatography with electrochemical detection

Trisodium phosphonoformate (foscarnet) is used in the treatment of cytomegalovirus infections in immunocompromised patients, such as bone marrow and renal transplant recipients, as well as patients with the acquired immune deficiency syndrome. A simple high-performance liquid chromatographic assay is described using an electrochemical detector. The method is accurate, precise and reproducible. Hydrochlorothiazide is used as the internal standard. This assay allows measurement of foscarnet in biological fluids at concentrations as low as 33 microM. This method is being used for the analysis of samples in clinical trials and is important in the evaluation of the pharmacokinetic disposition of the drug.     

Determination of traces of fluorine or sulfur by x-ray analysis

New X-ray methods have been developed for the determination of as little as 1 μg of fluorine or as little as 0.1 μg of sulfur. Fluorine as fluoride is precipitated as lanthanum fluoride in 75% ethanol-water mixture and determined by measuring the amount of lanthanum present in the precipitate. Sulfur as sulfate is precipitated as barium sulfate from a barium sulfate saturated 50% ethanol-buffer mixture, using selenate as a coprecipitant, and determined by measuring the amount of sulfur present. Sulfur as sulfide is precipitated as cadmium sulfide and determined by measuring the amount of sulfur or cadmium in the precipitate.     

Low-field NMR for quality control on oils

Oil is a prominent, but multifaceted material class with a wide variety of applications. Technical oils, crude oils as well as edibles are main subclasses. In this review, the question is addressed how low-field NMR can contribute in oil characterization as an analytical tool, mainly with respect to quality control. Prerequisite in the development of a quality control application, however, is a detailed understanding of the oils and of the measurement. Low-field NMR is known as a rich methodical toolbox that was and is explored and further developed to address questions about oils, their quality, and usability as raw materials, during production and formulation as well as in use.     

Effect of flexible polymers on the dielectric dispersion of rod-like macromolecules

The rotational diffusion of rod-like polar macromolecules (poly-γ-benzyl-l-glutamate or poly-n-hexylisocyanate) within entangled non polar polymer coils (polystyrene) is studied by dielectric absorption in solution. The dielectric increment as well as the rotatory diffusion constant is studied as a function of molecular weight of both components and increasing concentration of the non-polar polymer as well as the temperature. The classical theory of rotational diffusion is not obeyed if the viscosity of the polystyrene solution is taken as the medium viscosity. An increase in molecular aggregation on polystyrene addition is suspected.     

Androstenedione (a Natural Steroid and a Drug Supplement): A Comprehensive Review of Its Consumption,Metabolism, Health Effects,and Toxicity with Sex Differences

Androstenedione is a steroidal hormone produced in male and female gonads, as well as in the adrenal glands, and it is known for its key role in the production of estrogen and testosterone. Androstenedione is also sold as an oral supplement, that is being utilized to increase testosterone levels. Simply known as “andro” by athletes, it is commonly touted as a natural alternative to anabolic steroids. By boosting testosterone levels, it is thought to be an enhancer for athletic performance, build body muscles, reduce fats, increase energy, maintain healthy RBCs, and increase sexual performance. Nevertheless, several of these effects are not yet scientifically proven. Though commonly used as a supplement for body building, it is listed among performance-enhancing drugs (PEDs) which is banned by the World Anti-Doping Agency, as well as the International Olympic Committee. This review focuses on the action mechanism behind androstenedione’s health effects, and further side effects including clinical features, populations at risk, pharmacokinetics, metabolism, and toxicokinetics. A review of androstenedione regulation in drug doping is also presented.     

In vitro pro-oxidant action of Methotrexate in presence of white light

Methotrexate (MTX) an anti-cancer drug as well as a photosensitizer is able to generate reactive oxygen species (ROS). Cu (II) is present associated with chromatin in cancer cells and has been shown to be capable of mediating the action of several anti-cancer drugs through production of ROS. The objective of the present study is to determine Cu (II) mediated anti-cancer mechanism of MTX under photoilluminated condition as well as alone, using alkaline single cell gel electrophoresis (comet assay). We have shown that cellular DNA breakage was enhanced when Cu (II) is used with MTX as compared to MTX alone. It is also shown that MTX alone as well as in combination with Cu (II) is able to generate oxidative stress in lymphocyte which is inhibited by scavengers of ROS but the pattern of inhibition was differential as was also demonstrated by plasmid nicking assay. Thus, we can say that MTX exhibit pro-oxidant action in presence of white light which gets elevated in presence of Cu (II). Hence, we propose that the mobilization of endogenous copper is possibly involved in killing of cancer cells by MTX during chemo-radio therapy besides acting as antifolate.     

Accurate determination of sulfur at trace levels by isotope dilution mass spectrometry

Sulfur is recovered as silver sulfide which is converted to sulfur dioxide by combustion with pure oxygen at low pressure in 1 min. Isotopic analysis of as little as 40 μg of sulfur is possible with a precision better than 0.2%. The technique is applicable to materials such as Cu, Fe, Sn, ti, Zr, zircaloys and standard rocks.     

Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

Mechanisiertes thermometrisches Analysenverfahren zur Bestimmung von Substanzen in weiten Konzentrationsbereichen

A procedure for mechanised thermometric analysis is described which can be used for the continuous analysis of sample streams as well as for the determination of components in individual samples. In contrast to thermometric methods of analysis previously used, this new procedure is particularly applicable for substances present in medium to high concentrations, and is therefore suitable for many industrial purposes. The analytical exploitation of enthalpy changes as for example with neutralisation, redox and precipitation reactions as well as with dilution, opens wide application possibilities. The precision of the results is generally very good.     

非经典碳正离子问题

本文论述了非经典碳正离子这一问题的有关争论,是根据近期评论译述的。争论的中心是,全去甲莰正离子是在C—C或C—H键电子的σ-参与下形成非经典的离子,还是如Brown所指出的那样,是一个定域的经典离子,但受到立体的张力效应,从而加速了它在溶剂解中的形成。     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

Determination of anabolic steroids with gas chromatography-ion trap mass spectrometry using hydrogen as carrier gas.

Helium is considered to be the ideal carrier gas for gas chromatography/mass spectrometry (GC/MS) in general, and for use with an ion trap in particular. Helium is an inert gas, can be used without special precautions for security and, moreover, it is needed as a damping gas in the trap. A disadvantage of helium is the high viscosity resulting in long GC run times. In this work hydrogen was tested as an alternative carrier gas for GC in performing GC/MS analyses. A hydrogen generator was used as a safe source of hydrogen gas. It is demonstrated that hydrogen can be used as a carrier gas for the gas chromatograph in combination with helium as make-up gas for the trap. The analysis time was thus shortened and the chromatographic performance was optimized. Although hydrogen has proven useful as a carrier gas in gas chromatography coupled to standard detectors such as ECD or FID, its use is not mentioned extensively in the literature concerning gas chromatography-ion trap mass spectrometry. However, it is worth considering as a possibility because of its chromatographic advantages and its advantageous price when using a hydrogen generator.     

On the use of alumina in HPLC with aqueous mobile phases at extreme pH

Summary The applicability of alumina as a stationary phase in liquid chromatography is considered. Despite the presence of hydroxyl groups on wetted alumina, chemical modification with silanes by analogy to silica is not successful. Although depolarisation can be achieved with hexamethyldisilazane, the product is not stable to hydrolysis in aqueous media. The use of alumina as an ion-exchanger is more promising, especially because alumina appears to be stable over a very broad pH range. As a result of its amphoteric character alumina can be used either as an anion-exchanger or as a cation-exchanger. The latter possibility is more profitable in alkaline solvents and allows the separation of strongly basic compounds at pH values as high as 12. Retention can be controlled by judicious choice of ionic strength, counter ion and pH.     

On the definition of the excess permittivity of a fluid mixture

It is shown that under the assumption of no intermolecular interaction, the permittivity of a homogeneous linear and isotropic fluid mixture is the sum of the individual permittivities weighted with the mole fractions of the components. For definiteness, a proof is given for gasses under standard temperature and pressure; it is, however, easy to generalize it to other conditions, as well as to liquids, as long as the assumption of no intermolecular interaction is retained. Also, although the proof is given for a binary mixture, it is a simple exercise to extend it to any multicomponent mixture.     

Regiodivergent C−H Acylation of Arenes by Switching from Ionic- to Radical-Type Chemistry Using NHC Catalysis

The Friedel–Crafts acylation reaction, which belongs to the class of electrophilic aromatic substitutions is a highly valuable and versatile reaction in synthesis. Regioselectivity is predictable and determined by electronic as well as steric factors of the (hetero)arene substrate. Herein, a radical approach for the acylation of arenes and heteroarenes is presented. C−H acylation is achieved through mild cooperative photoredox/NHC radical catalysis with the cross-coupling of an arene radical cation with an NHC-bound ketyl radical as a key step. As compared to the classical Friedel–Crafts acylation, a regiodivergent outcome is observed upon switching from the ionic to the radical mode. In these divergent reactions, aroyl fluorides act as the acylation reagents in both the ionic as well as the radical process.     

The QCHB model of fluids and their mixtures

The essentials of the QCHB (quasi-chemical hydrogen-bonding) equation-of-state model are presented along with some applications for calculations of phase equilibria and interfacial properties of fluids and their mixtures. This is a model applicable to non-polar systems as well as to highly non-ideal systems with strong specific interactions, to systems of small molecules as well as to macromolecules, including polydisperse polymers, glasses, and gels, to liquids as well as to vapours including supercritical systems, to homogeneous as well as to inhomogeneous systems. A quasi-thermodynamic approach of inhomogeneous systems is used for modeling the fluid–fluid interface. Consistent expressions for the interfacial tension and interfacial profiles for various properties are presented. A satisfactory agreement is obtained between experimental and calculated surface tensions. Extension of the approach to mixtures is examined along with the associated problems for the numerical calculations of the interfacial profiles. A new equation is derived for the chemical potentials in the interfacial region, which facilitates very much the calculation of the composition profiles across the interface. The relation of the model with the COSMO-RS approach is also discussed.     

Determination of reactivity ratios for the copolymerization of styrene and styrene–acrylonitrile with polybutadienes

The copolymerization of styrene and styrene–acrylonitrile with polybutadienes of various microstructures was studied and the reactivity ratios determined. It was shown that for the styrene/acrylonitrile/polybutadiene systems the 1,2 structure is twice as reactive as the trans and four times as reactive as the cis. Studies in the temperature range of 50–80°C reveal that the reactivity of the polybutadiene increases as the temperature rises. When styrene is the monomer the reactivity of polybutadiene and the temperature effect is less intense than when styrene–acrylonitrile is used.     

The nature of the catalytically active species in olefin dioxygenation with PhI(OAc)2: metal or proton?

Evidence for the protiocatalytic nature of the diacetoxylation of alkenes using PhI(OAc)(2) as oxidant is presented. Systematic studies into the catalytic activity in the presence of proton-trapping and metal-complexing agents indicate that protons act as catalysts in the reaction. Using triflic acid as catalyst, the selectivity and reaction rate of the conversion is similar or superior to most efficient metal-based catalysts. Metal cations, such as Pd(II) and Cu(II), may interact with the oxidant in the initiation phase of the catalytic transformation; however, 1 equiv of strong acid is produced in the first cycle which then functions as the active catalyst. Based on a kinetic study as well as in situ mass spectrometry, a mechanistic cycle for the proton-catalyzed reaction, which is consistent with all experimental data presented in this work, is proposed.     

Micropollutant sorption to membrane polymers: a review of mechanisms for estrogens

Organic micropollutants such as estrogens occur in water in increasing quantities from predominantly anthropogenic sources. In water such micropollutants partition not only to surfaces such as membrane polymers but also to any other natural or treatment related surfaces. Such interactions are often observed as sorption in treatment processes and this phenomenon is exploited in activated carbon filtration, for example. Sorption is important for polymeric materials and this is used for the concentration of such micropollutants for analytical purposes in solid phase extraction. In membrane filtration the mechanism of micropollutant sorption is a relatively new discovery that was facilitated through new analytical techniques. This sorption plays an important role in micropollutant retention by membranes although mechanisms of interaction are to date not understood. This review is focused on sorption of estrogens on polymeric surfaces, specifically membrane polymers. Such sorption has been observed to a large extent with values of up to 1.2 ng/cm(2) measured. Sorption is dependent on the type of polymer, micropollutant characteristics, solution chemistry, membrane operating conditions as well as membrane morphology. Likely contributors to sorption are the surface roughness as well as the microporosity of such polymers. While retention-and/or reflection coefficient as well as solute to effective pore size ratio-controls the access of such micropollutants to the inner surface, pore size, porosity and thickness as well as morphology or shape of inner voids determines the available area for sorption. The interaction mechanisms are governed, most likely, by hydrophobic as well as solvation effects and interplay of molecular and supramolecular interactions such as hydrogen bonding, π-cation/anion interactions, π-π stacking, ion-dipole and dipole-dipole interactions, the extent of which is naturally dependent on micropollutant and polymer characteristics. Systematic investigations are required to identify and quantify both relative contributions and strength of such interactions and develop suitable surface characterisation tools. This is a difficult endeavour given the complexity of systems, the possibility of several interactions taking place simultaneously and the generally weaker forces involved.