The extraction and determination of molybdenum as the thiocyanate complex

A method is presented for the determination of molybdenum by extraction of its thiocyanate complex with methyl isobutyl ketone. The method is accurate to ±4% or 3 μg of molybdenum, whichever is greater. The only elements which cause interference are rhenium (serious), platinum, palladium, rhodium, selenium and tellurium. The method has been applied to a number of standard samples with excellent results.     

Spectrophotometric determination of molybdenum by extraction of a green molybdenum(v) species

A simple method is described for the rapid spectrophotometric determination of molybdenum in samples containing 1-60% Mo, with satisfactory accuracy. Molybdenum is reduced with excess of hydrazine sulphate in boiling 5.5M hydrochloric acid and extracted with isoamyl acetate from 7M hydrochloric acid. The green colour is measured at 720 nm against a reagent blank. Beer's law is obeyed over the range 0.08-5.4 mg of molybdenum per ml. Interference from iron and copper is removed by adding stannous chloride and thiourea respectively in slight excess. Titanium, vanadium, niobium, chromium, tungsten, nickel, uranium, and antimony do not interfere even in large amounts. Only cobalt interferes seriously.     

Extractive-spectrophotometric determination of molybdenum as mixed-ligand complexes with thiocyanate and amidopyridines

A fairly selective and sensitive method is described for the determination of microgram amounts of molybdenum(V) by means of its reaction with thiocyanate and the enolic form of various amidopyridines and extraction into benzene. The molar absorptivity of the complexes is in the range 1.5-1.9 x 10(4) l.mole(-1).cm(-1) at lambda(max) 470 nm. The method is applicable in 1.5-7M hydrochloric acid or 1.2-6(M) sulphuric acid media. Cu(+), Co(2+), Mn(2+), Zn(2+), Ni(2+), Cd(2+), Fe(3+), Al(3+), Cr(3+), Ti(4+), Zr(4+), V(V), Nb(5+), Ta(5+), W(VI) and U(VI) do not interfere.     

Spectrophotometric determination of molybdenum in rocks with thiocyanate

A rapid procedure for the determination of microgram amounts of molybdenum in rocks is described. After acid decomposition, molybdenum is extracted from a hydrochloric acid solution into xylene with tributyl phosphate. After back-extraction with water, molybdenum is extracted as the α-benzoinoximate into chloroform, stripped into hydrochloric acid extracted as the thiocyanate into amyl alcohol, and determined spectrophotometrically. The molybdenum thiocyanate color produced is stable, sensitive, and reproducible. Results of analyses of several of the U.S. Geological Survey standard rocks are given.     

Extractive-spectrophotometric determination of molybdenum as an ion-association complex with thiocyanate and adogen

A selective and sensitive method is described for the determination of trace amounts of molybdenum, based on its reaction with thiocyanate and its extraction (into toluene) as an ion-association complex formed with adogen (methyltrioctylammonium chloride). The molar absorptivity is 2.13 x 10(4) l.mole(-1).cm(-1) at lambda(max) 467 nm. The method has been applied to molybdenum determination in steels.     

Spectrophotometric determination of molybdenum in steel after extraction with thiocyanate and butyltriphenylphosphonium bromide into microcrystalline benzophenone

Molybdenum(VI) is reduced to molybdenum (V) with ascorbic acid, reacts with thiocyanate and the complex is extracted with butyltriphenylphosphonium by microcrystalline benzophenone and the solid phase is dissolved in chloroform and measured spectrophotometrically. The system is applied to the determination of molybdenum (0.53–4.92%) in high-speed tool steels without prior separation of iron.     

Spectrophotometric determination of molybdenum(VI) with 2-mercaptobenzo-γ-thiopyrone and ammonium thiocyanate

Molybdenum(VI) in 1.4–3.6 M hydrochloric acid medium forms an acetophenone-extractable orange-red complex with the potassium salt of 2-mercapto-benzo-γ-thiopyrone and ammonium thiocyanate in the presence of tin(II) chloride. The limit of identification of the spot test based on this reaction is 0.1 μg of molybdenum (dilution limit, 1:1·10⁶). The spectrophotometric method is fairly selective, the sensitivity being 0.005μg Mo cm^-2 at 470 nm. The colour system obeys Beer's law; the optimal concentration range is 0.75–8.5 μg Mo ml^-1, the relative photometric error being 1.675%. The complex is stable for over 24 h. Common ions can be tolerated in amounts greater than 1000-fold. Interferences of Co²⁺, Ni²⁺, Cu²⁺ and Ag⁺ are avoided by complexing these ions with 2-mercaptobenzo-γ-thiopyrone at pH 6–10 and extracting with ethyl acetate or chloroform. The proposed method is applied to the determination of molybdenum in steel and in artificial mixtures.     

Coulometric generation of molybdenum(v)

Molybdenum (V) was generated at a platinum cathode from 0.7 M molybdenum(VI) in 4 M sulfuric acid. A current efficiency of 99.9% was attained. A limiting current density of 0.05 mA/cm²/mM was found. The formal potential of the Mo(VI)–Mo(V) couple in 4 M sulfuric acid was determined to be ca. 0.55 V vs. N.H.E. Chromium(VI) solutions were titrated over a wide range of sample size and generating current. Amperometric titration curves were interpreted from current-voltage curves. Titrations could be performed in the presence of oxygen at the 1μeq. level. The effect of nitrate, perchlorate, orthophosphate, and chloride ions on the titration was determined.     

Colorimetric determination of molybdenum by the reaction with thiocyanate

Summary A new method for the photometric determination of micro quantities of molybdenum through the thiocyanate method has been developed. The reduction of Mo VI to Mo V is achieved by photochemical reaction at 2 N acidity without the addition of an extraneous reducing agent. The coloured complex is stable for about 36 hrs. in 2.0N acid concentration. The method is accurate to about ±1.0% and Beer's Law is obeyed within the limits of 0 to 100 g.

---

Zusammenfassung Ein Verfahren zur photometrischen Bestimmung von Mikromengen MolybdÄn mit der Thiocyanatmethode wird beschrieben. Die Reduktion von Mo^VI zu Mo^V wird durch photochemische Reaktion in 2 n saurem Medium ohne Zusatz eines weiteren Reduktionsmittels erreicht. In diesem SÄuremedium ist der Farbkomplex etwa 36 Std lang stabil. Die erhaltenen Werte sind auf ±1,0% genau und das Beersche Gesetz wird von 0–100 g befolgt.

     

Uramyldiacetic acid (UDA) as absorptiometric agent

The analytical behavior of uramyldiacetic acid as potential chromogenic reagent for the spectrophotometric determination of trace materials is studied. As a result, interesting reactions with copper (II), uranium (VI), iron (II), iron (III), cobalt (II), cerium (II), and nickel (II) in neutral or acidic medium were observed. The absorption spectrum of UDA is established.     

Spectrophotometric determination of vanadium as vanadium(IV) pyridine thiocyanate

A spectrophotometric determination of vanadium as vanadium(IV) pyridine thiocyanate is described. The blue complex is formed in acidic aqueous solution and extracted into pyridine-chloroform. Absorbance is measured at 7.40 mμ. The range of best accuracy for 1-cm cells is from about 80 to 240 μg of vanadium per ml, and sensitivity is 0.4 μg of vanadium per cm² at 7.40 mμ. The vanadium may be present initially as vanadium(IV) or vanadium(V), which is reduced to vanadium(IV) by the large excess of thiocyanate ion added. Several elements interfere in the determination ; a separation procedure involving mercury cathode electrolysis is suggested.     

Extractive spectrophotometry of the molybdenum (III) 1,10-phenanthroline thiocyanate and 2,2'-bipyridyl thiocyanate complexes

New extraction spectrophotometric methods for the determination of small amounts of molybdenum have been developed, using thiocyanate and 1,10-phenanthroline or 2,2'-bipyridyl as reagents in the presence of chlorostannous acid. Extracts of the ternary complexes of tervalent molybdenum in 1,2-dichloroethane obey Beer's law in the range 1-10 mug/ml at 525 nm. A 10-fold excess of iron and vanadium and 100-fold excess of tungsten, phosphorus and silicate do not interfere.     

Polarographic determination of copper(II) after salting-out extraction as thiocyanate in acetonitrile

Summary A simple and sensitive extraction-polarographic method for the determination of copper(II) by use of acetonitrile as solvent is described. The copper(II) complex formed in aqueous solution can be quantitatively extracted into acetonitrile, in which the complex is reduced to give a polarographic wave withE _1/2–0.58 Vvs. SCE. Linear calibration curves for copper(II) are obtained by the dc, ac and differential pulse polarographic methods. Foreign ions such as Hg(II), Bi, Pb(II), Zn and Ni have no effect even in 20-fold amount relative to copper(II), but a 10-fold ratio of Sn(II) does interfere.

---

Zusammenfassung Ein einfaches und empfindliches Verfahren zur Extraktion von Kupfer (II) mit Acetonitril und darauf folgende polarographische Bestimmung wurde beschrieben. Der in wäßriger Lösung entstandene Cu(II)-Komplex läßt sich mit Acetonitril quantitativ extrahieren. Er wird dann reduziert und gibt eine polarographische Welle mit dem Halbwellenpotential E_1/2=–0,58 V gegen eine gesättigte Kalomelelektrode. Lineare Eichkurven für Kupfer(II) ergaben sich mit Gleichstrom-, Wechselstrom- und Differential-Puls-Polarographie. Fremdionen wie Hg(II), Bi, Pb(II), Zn und Ni beeinflussen das Ergebnis auch in 20fachem Überschuß nicht, wohl aber stört Sn(II) in 10facher Menge.

     

Extractive spectrophotometric determination of molybdenum(V) in molybdenum steels

An extraction spectrophotometric method has been developed for the determination of traces of molybdenum present in molybdenum steels which is based on the extraction of the orange-red molybdenum-thiocyanate-acetonethiosemicarbazone complex into chloroform from hydrochloric acid medium. The complex has an absorption maximum at 472 nm with a molar absorptivity of 1.9 × 10⁴ liters mol⁻¹ cm⁻¹. Beer's law is valid over the concentration range 0.1–9.5 ppm of molybdenum with an optimum concentration range of 0.4–9 ppm. The equilibrium shift method indicates 1:4:2 composition for molybdenumthiocyanate-acetonethiosemicarbazone complex. The effect of acidity, reagent concentrations, temperature, and interferences from various ions are reported.     

Complexometric determination of molybdenum(VI)

In acidic medium molybdenum(VI) forms a stable complex on boiling with excess of DCTA and hydroxylamine hydrochloride. Molybdenum can then be determined by back-titration of the excess of DCTA either with zinc chloride at pH 5-5.5 or with thorium nitrate at pH 3-4.5, Xylenol Orange being used as indicator in both cases. A simple method for the determination of molybdenum in the presence of moderate amounts of tungsten is also described.     

Spectrophotometric determination of molybdenum(VI)

Molybdenum(IV) gives a red colour with ammonium thiocyanate in 5-8M hydrochloric acid medium, the Sandell sensitivity index being 0.018 ppm Mo(VI)/cm(2). Molybdenum(VI) in 4-7M hydrochloric acid medium forms a red complex with ethyl xanthate and ammonium thiocyanate and this can be extracted into acetophenone. Beer's law is obeyed over the range of 1.2-13.8 ppm, and the Sandell indices at 370 and 470 nm are 0.0016 and 0.0068 ppm/cm(2) respectively. The colour is stable for 40 hr. Most cations do not interfere.     

Carminic acid as a reagent for the spectrofluorimetric determination of molybdenum and tungsten-II Determination of molybdenum in mild steel

A method is described for the spectrofluorimetric determination of molybdenum in mild steel down to 0.01 %. After dissolution of the sample, molybdenum is separated from the bulk of iron by extraction of molybdenum(V) thiocyanate with isoamyl acetate. It is then determined with carminic acid as described in Part I.     

n-arylhydroxamic acids as reagents for vanadium(v) : Spectrophotometric determination of vanadium(v) with n-m-tolyl-p-methoxybenzohydroxamic acid

A study of the coloured complexes of 51 N-arylhydroxamic acids with vanadium(V) in hydrochloric acid media is described. The absorption spectra of the coloured chloroform extracts and the molar absorptivities are compared. The effects of different substituents attached to the carbon and nitrogen atom of the hydroxamic acid functional group are discussed. A rapid extraction-spectrophotometric method for the determination of vanadium(V) is described, employing the most promising of these reagents, N-m-tolyl-p-methoxybenzohydroxamic acid. The method is highly selective and tolerates large amounts of diverse ions usually associated with vanadium-bearing materials including iron(III), aluminium(III), chromium(III), nickel(II), cobalt(II), zinc(II) and manganese(II).