Das erste Oxatetraphospholan, (PBut)4O

Contributions to the Chemistry of Phosphorus. 244. The First Oxatetraphospholane, (PBu^t)₄O Under suitable conditions, the reaction ot tri‐tertbutylcyclotriphosphane, (PBu^t)₃, with di‐tert‐butylperoxide gives rise to a mixture of 2,3,4,5‐tetra‐tert‐butyl‐1,2,3,4,5‐oxatetraphospholane, (PBu^t)₄O ( 1 ), and 1,2‐di‐tert‐butyl‐1,2‐di‐tert‐butoxidiphosphane, [Bu^t(Bu^tO)P]₂ ( 2 ). Both compounds have been isolated in the pure state. The oxatetraphospholane 1 is a constitutional isomer of 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, which has been reported recently [1]. The corresponding reaction of tetra‐tert‐butylcyclotetraphosphane furnishes only small amounts of 1 because of the kinetic stability of (PBu^t)₄. The diphosphane 2 is presumably a secondary product of primarily formed oxocyclotetraphosphanes (PBu^t)₄O_1–4. The NMR parameters of 1 and 2 are reported and discussed.     

Electron paramagnetic resonance study of nitroxides generated from nitric oxide by reaction with transient radicals

Photochemical or thermal decomposition of azo‐compounds (such as 2,2^′‐azobisisobutyronitrile, 2,2^′‐azobis(2‐methylpropionamidine) dihydrochloride, dialkyl peroxides (such as tert‐butyl peroxide and diacyl peroxides (such as benzoyl peroxide) in anaerobic nitric oxide (NO)‐saturated dimethylsulfoxide (DMSO) or aqueous solutions yielded nitroxides. Well‐characterized electron paramagnetic resonance spectra of nitroxides revealed that NO was favorable for reacting with carbon‐centered and less stereo‐inhibited transient alkyl radicals, giving kinds of nitrosoalkane, typically nitrosomethane, which act sequentially as C‐nitroso compounds to trap transient radicals present in solution, yielding spin‐trapping adducts, i.e. nitroxides. Radicals, including sulfinyl radicals from UV‐irradiated DMSO, were trapped by the in situ formed CH₃NO. O‐centered radicals could not add to the freshly formed C‐nitroso compounds. Possible mechanisms are suggested. Copyright © 2002 John Wiley & Sons, Ltd.     

Amino‐ und halogenfunktionelle Siloxititane

Amino‐ and halofunctional Siloxititanes Amino‐di‐tert‐butylsilanol reacts with tetrabutoxititane in a molar ratio of 2:1 to give di‐n‐butoxi(bis(di‐tert‐butyl‐n‐butoxi)siloxi)titane, (C₄H₉OSi(CMe₃)₂‐O)₂Ti(OC₄H₉)₂ ( 1 ), and lithium‐di‐tert‐butylchlorosilanolate in a molar ratio of 3:1 to give n‐butoxi(tris(di‐tert‐butyl‐n‐butoxi)siloxi)titane, (H₉C₄OSi(CMe₃)₂‐O)₃TiOC₄H₉ ( 2 ). The amino‐di‐tert‐butylsilanol substitutes the four chloroatoms of TiCl₄ in the presence of triethylamine as HCl‐acceptor. The tetrakis(amino‐di‐tert‐butyl)siloxititane ( 3 ) is formed. The lithium salt of di‐tert‐butylfluorosilanol reacts with TiCl₄ in a molar ratio of 2:1 to give 1, 1, 3, 3‐tetra‐tert‐butyl‐1‐fluoro‐3‐trichlorotitoxi‐1, 3‐disiloxane, FSi(CMe₃)₂‐O‐Si(CMe₃)₂‐O‐TiCl₃ ( 4 ). In the reaction of di‐tert‐butyl‐chlorosilanol and TiCl₄, the anion [chlorosiloxi‐octa(tri‐μ²‐chlorotitanate)]^— ( 5 ) with protonated diethylether as counterion is obtained by using diethylether as HCl‐acceptor. The crystal structure determinations of 3 and 5 are reported.     

Attempt to Synthesize Hindered 2,4,6‐Tri‐Aryloxy‐s‐Triazines: Bis(2,4‐di‐tert‐Butylphenyl) Carbonate – Crystal Structure

Some less hindered 2,4,6‐tri‐aryloxy‐s‐triazines were synthesized through the reaction of the corresponding phenols as a starting materials with cyanogen bromide (BrCN) to obtain the corresponding arylcyanates and then trimerized. Unexpectedly, 2,4‐di‐tert‐butyl‐1‐cyanatobenzene derived from 2,4‐di‐tert‐butylphenol did not trimerize but, indeed, yielded bis(2,4‐di‐tert‐butylphenyl) carbonate. The structures of 2,4,6‐tri‐aryloxy‐s‐triazines and bis(2,4‐di‐tert‐butylphenyl) carbonate were characterized by means of IR, ¹H, and ¹³C NMR spectroscopies. Also the structure of the latter compound was studied by X‐ray crystallography.     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Copper(II)‐Mediated Transformation of a Tridentate Non‐Innocent Ligand into a Tetradentate Salen‐Type Innocent Ligand

A non‐innocent ligand, H₄L, was synthesized by introducing a ? CH₂NH₂ group at the ortho carbon atom to the aniline moiety of 2‐anilino‐4,6‐di‐tert‐butylphenol. The new ligand was characterized by IR and NMR spectroscopy and mass spectrometry techniques. Upon treatment with CuCl₂ ? 2 H₂O, this non‐innocent ligand provided a mononuclear four‐coordinate salen‐type Cu^II complex by complete modification of the ligand backbone. The complex was characterized by IR spectroscopy, mass spectrometry, X‐ray single‐crystal diffraction, electron paramagnetic resonance (EPR) spectroscopy, and UV/Vis/near‐IR spectroscopy techniques. X‐ray crystallographic analysis showed an asymmetric environment around the Cu^II center with a small (≈12°) twist between the two biting planes. Analysis of the X‐band EPR spectrum also supported the asymmetric environment and also indicated the presence of an unpaired electron on the d orbital. The UV/Vis/near‐IR spectrum showed strong absorption bands for metal‐to‐ligand charge transfer and ligand‐to‐metal charge transfer along with a Cu^II‐centered d–d transition. Mechanistic investigation of the formation of complex 1 indicated that modification of the ligand backbone proceeded through ligand‐centered amine to imine oxidation as well as through C? N bond‐breaking processes. During these processes, 3,5‐di‐tert‐butyl‐1,2‐benzoquinone and 2‐aminobenzylidene were produced. Ammonia, generated in situ through hydrolysis of the imine to the aldehyde, reacted with 3,5‐di‐tert‐butyl‐1,2‐benzoquinone to form the corresponding 3,5‐di‐tert‐butyl‐1,2‐iminobenzoquinone moiety, which upon two‐electron reduction in the reaction medium formed 3,5‐di‐tert‐butyl‐1,2‐aminophenol. This aminophenol underwent condensation with the H₂L5 ligand that was formed by self‐condensation of two molecules of 2‐aminobenzaldehyde and provided the modified ligand backbone.     

Über die Oxo‐cyclotetraphosphane (PBut)4O1–4

Contributions to the Chemistry of Phosphorus. 243 On the Oxocyclotetraphosphanes (PBu^t)₄O_1–4 Under suitable conditions, the reaction of tetra‐tert‐butylcyclotetraphosphane, (PBu^t)₄, with dry atmospheric oxygen gives rise to the corresponding monoxide (PBu^t)₄O ( 1 ) which has been isolated by column chromatography. The reaction with hydrogen peroxide furnishes a mixture of oxocyclotetraphosphanes (PBu^t)₄O_1–4 consisting of two constitutionally isomeric dioxides (PBu^t)₄O₂ ( 2 a , 2 b ), the trioxide (PBu^t)₄O₃ ( 3 ), and the tetraoxide (PBu^t)₄O₄ ( 4 ), in addition to 1 . According to the ³¹P NMR parameters the oxygen atoms are exclusively exocyclically bonded to the phosphorus four‐membered ring. Which of the P atoms are present as λ⁵‐phosphorus follows from the different low‐field shifts of the individual P nuclei compared with the starting compound. Accordingly, 1 is 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, 2 a and 2 b are 1,2,3,4‐Tetra‐tert‐butyl‐1,2‐dioxo‐ and ‐1,3‐dioxocyclotetraphosphane, respectively, 3 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3‐trioxocyclotetraphosphane, and 4 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3,4‐tetraoxocyclotetraphosphane. When the oxidation reaction proceeds a fission of the P₄ ring takes place.     

High Tg and high organosolubility of novel unsymmetric polyimides

A series of new polyimides (PIs) containing di‐tert‐butyl side groups were synthesized via a polycondensation of 1‐(4‐aminophenoxy)‐4‐(4‐amino‐2‐methylphenyl)‐2,6‐di‐tert‐butylbenzene ( 3 ) with various aromatic tetracarboxylic dianhydrides. The novel unsymmetric PIs exhibited a low dielectric constants (2.78–3.02), low moisture absorption (0.53–1.35%), excellent solubility, and high glass transition temperature (308–450 °C). The PI derived from the new diamine and the very rigid naphthalene‐1,4,5,8‐tetracarboxylic dianhydride (NTDA) was soluble in N‐methyl‐2‐pyrrolidone, chloroform, m‐cresol, and cyclohexanone. The unsymmetric di‐tert‐butyl pendent groups significantly enhance the rotational barrier of the polymer chains; thus these PIs had high T_gs. The ¹H NMR spectrum of the diamine 3 revealed that the protons of 4‐aminophenoxy moiety are not chemical shift equivalent. This is because the steric hindrance of the bulky di‐tert‐butyl groups prevents the benzene ring of 4‐aminophenoxy moiety from rotating freely. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2443–2452, 2009     

Alkyl substituted phenoxyl decay in a hydrogen transfer equilibrium

The kinetics of radical decay in the equilibrium: 2,4,6‐tri‐tert‐butylphenoxyl radical 1 + 2,6‐di‐tert‐butyl‐4‐methylphenol 2 = 2,4,6‐tri‐tert‐butylphenol 3 + 2,6‐di‐tert‐butyl‐4‐methylphenoxyl radical 4 was studied at 298 and 273 K by means of EPR spectroscopy. At 298 K second order prevails, whereas at 273 K the best fit was order 3/2. The extinction of 4 takes place in two steps: dimerization followed by disproportionation of the dimer, but the stable radical 1 enters in crossed dimerization with 4 to yield nonradical products. The mechanism ensures a constant [ 4 ]/[ 1 ] ratio along the decay. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 1–4, 2005     

SO2‐Extrusion of an 8‐thiabicylo[3.2.1]octa‐2,6‐diene 8,8‐dioxide and rearrangement of the resulting cycloheptatriene

The reaction of 3,4‐di‐tert‐butyl‐thio‐phene 1‐oxide ( 8 ) with tetrachlorocyclopropene provided 6,7‐di‐tert‐butyl‐2,3,4,4‐tetrachloro‐8‐thia‐bicylo[3.2.1]octa‐2,6‐diene 8‐oxide ( 10 ), which was oxidized to the corresponding 8,8‐dioxide 16 by m‐chloroperbenzoic acid. The thermolysis of 16 in refluxing chlorobenzene, xylene, or octane gave 5‐tert‐ butyl‐1,2‐dichloro‐3‐[(1,1‐dich‐loro‐2,2‐dimethyl)‐pro‐ pyl]‐benzene ( 18 ) with extrusion of SO₂ and 2‐tert‐butyl‐4,5,6‐trichloro‐9,9‐dimethylbicyclo[5.2.0]nona‐1,3,5‐triene ( 19 ) with extrusion of SO₂ and HCl in 73–78% combined yields. On the other hand, the thermolysis of 16 in the presence of triethylamine gave 19 as the sole product in 98% yield. A mechanism that involves the initial formation of 4,5‐di‐tert‐butyl‐1,2,7,7‐tetrachlorocycloheptatriene ( 17 ) is proposed to ex‐ plain the observed products. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:132–222, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20079     

N,O‐chelate aluminum and zinc complexes: synthesis and catalysis in the ring‐opening polymerization of ε‐caprolactone

Reaction between 2‐(1H‐pyrrol‐1‐yl)benzenamine and 2‐hydroxybenzaldehyde or 3,5‐di‐tert‐butyl‐2‐hydroxybenzaldehyde afforded 2‐(4,5‐dihydropyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL¹NH, 1a) or 2,4‐di‐tert‐butyl‐6‐(4,5‐dihydropyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL²NH, 1b). Both 1a and 1b can be converted to 2‐(H‐pyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL³N, 2a) and 2,4‐di‐tert‐butyl‐6‐(H‐pyrrolo[1,2‐a]quinoxalin‐4‐yl)phenol (HOL⁴N, 2b), respectively, by heating 1a and 1b in toluene. Treatment of 1b with an equivalent of AlEt₃ afforded [Al(Et₂)(OL²NH)] (3). Reaction of 1b with two equivalents of AlR₃ (R = Me, Et) gave dinuclear aluminum complexes [(AlR₂)₂(OL²N)] (R = Me, 4a; R = Et, 4b). Refluxing the toluene solution of 4a and 4b, respectively, generated [Al(R₂)(OL⁴N)] (R = Me, 5a; R = Et, 5b). Complexes 5a and 5b were also obtained either by refluxing a mixture of 1b and two equivalents of AlR₃ (R = Me, Et) in toluene or by treatment of 2b with an equivalent of AlR₃ (R = Me, Et). Reaction of 2a with an equivalent of AlMe₃ afforded [Al(Me₂)(OL³N)] (5c). Treatment of 1b with an equivalent of ZnEt₂ at room temperature gave [Zn(Et)(OL²NH)] (6), while reaction of 1b with 0.5 equivalent of ZnEt₂ at 40 °C afforded [Zn(OL²NH)₂] (7). Reaction of 1b with two equivalents of ZnEt₂ from room temperature to 60 °C yielded [Zn(Et)(OL⁴N)] (8). Compound 8 was also obtained either by reaction between 6 and an equivalent of ZnEt₂ from room temperature to 60 °C or by treatment of 2b with an equivalent of ZnEt₂ at room temperature. Reaction of 2b with 0.5 equivalent of ZnEt₂ at room temperature gave [Zn(OL⁴N)₂] (9), which was also formed by heating the toluene solution of 6. All novel compounds were characterized by NMR spectroscopy and elemental analyses. The structures of complexes 3, 5c and 6 were additionally characterized by single‐crystal X‐ray diffraction techniques. The catalysis of complexes 3, 4a, 5a–c, 6 and 8 toward the ring‐opening polymerization of ε‐caprolactone was evaluated. Copyright © 2008 John Wiley & Sons, Ltd.     

Selective Monoarylation of Primary Amines Using the Pd‐PEPPSI‐IPentCl Precatalyst

A single set of reaction conditions for the palladium‐catalyzed amination of a wide variety of (hetero)aryl halides using primary alkyl amines has been developed. By combining the exceptionally high reactivity of the Pd‐PEPPSI‐IPent^Cl catalyst (PEPPSI=pyridine enhanced precatalyst preparation, stabilization, and initiation) with the soluble and nonaggressive sodium salt of BHT (BHT=2,6‐di‐tert‐butyl‐hydroxytoluene), both six‐ and five‐membered (hetero)aryl halides undergo efficient and selective amination.     

Novel Dinuclear Redox‐isomeric Complexes with a Tetrapodal Pyridine‐based Ligand

Tris‐o‐semiquinonato cobalt complexes react with a tetrapodal pyridine‐derived ligand to form dinuclear cobalt compounds of general formula (OMP)[CoQ₂]₂, where OMP = 2,2′‐(pyridine‐2,6‐diyl)bis(N¹,N¹,N³,N³‐tetramethylpropane‐1,3‐diamine), Q = mono‐ or dianion of 3,6‐di‐tert‐butyl‐o‐benzoquinone (complex 1 ) and it derivatives: 3,6‐di‐tert‐butyl‐4,5‐N,N′‐piperazino‐o‐benzoquinone (complex 2 ), and 3,6‐di‐tert‐butyl‐4‐Cl‐o‐benzoquinone (complex 3 ). Single crystal X‐ray crystallography of 1 and 3 indicates two bis‐quinonato cobalt units bound by an OMP ligand, which acts as a bridge. Each central cobalt atom is chelated by one N¹,N¹,N³,N³‐tetramethylpropane‐1,3‐diamine and two o‐quinonato fragments. The nitrogen atom of the pyridine ring is uncoordinated. All complexes were characterized by NIR‐IR and EPR spectroscopy, precise adiabatic vacuum calorimetry, and by variable‐temperature magnetic susceptibility measurements. All data indicate a reversible thermally driven redox‐isomeric (valence tautomeric) transformation in the solid state for all complexes.     

Simultaneous determination of five common additives in insulating mineral oils by high‐performance liquid chromatography with ultraviolet and coulometric detection

Dielectric mineral oils are used to impregnate power transformers and large electrical apparatus, acting as both liquid insulation and heat dissipation media. Antioxidants and passivators are frequently added to mineral oils to enhance oxidation stability and reduce the electrostatic charging tendency, respectively. Since existing standard test methods only allow analysis of individual additives, new approaches are needed for the detection of mixtures. For the first time we investigate and discuss the performance of analytical methods, which require or do not require extraction as sample pretreatment, for the simultaneous reversed‐phase high‐performance liquid chromatography determination of passivators (benzotriazole, Irgamet^® 39) and antioxidants (N‐phenyl‐1‐naphtylamine, 2,6‐di‐tert‐butylphenol, 2,6‐di‐tert‐butyl‐p‐cresol), chosen for their presence in marketed oils. Quick easy, cheap, effective, rugged and safe and solid phase extractions were evaluated as sample pretreatments. Direct sample‐injection was also studied. Ultraviolet spectrophotometry and direct‐current coulometry detection were explored. As less prone to additive concentrations variability, the direct‐injection high‐performance liquid chromatography with ultraviolet and coulometric detection method was validated through comparison with Standard Method IEC 60666 and through an ASTM interlaboratory proficiency test. Obtained detection limits are (mg kg^?1): benzotriazole (2.8), Irgamet^® 39 (13.8), N‐phenyl‐1‐naphtylamine (11.9), 2,6‐di‐tert‐butylphenol (13.1), 2,6‐di‐tert‐butyl‐p‐cresol (10.2). Simultaneous determination of selected additives was possible both in unused and used oils, with good precision and accuracy.     

Addition of Isocyanides to Tetramesityldigermene: A Comparison of the Reactivity between Surface and Molecular Digermenes

The reaction of benzyl isocyanide, tert‐butyl isocyanide, and 2,6‐dimethylphenyl isocyanide with tetramesityldigermene (Mes₂Ge=GeMes₂) was examined. Whereas the addition of benzyl isocyanide gave the C?NC activation product, Mes₂Ge(CH₂Ph)Ge(CN)Mes₂, tert‐butyl isocyanide, and 2,6‐dimethylphenyl isocyanide did not give stable adducts, rather the rate of conversion of the digermene to the corresponding cyclotrigermane was accelerated. A comparison between the reactivity of the isocyanides with Mes₂Ge=GeMes₂ and the Ge(100)‐2×1 surface was made and some insights into the surface chemistry are offered.     

Isolable Anion Radicals of Nitrosoarenes

Summary of main observation and conclusion The rich redox chemistry of nitrosoarenes has rendered these reactive molecules very useful in modern synthetic and material chemistry.Electrochemical studies have revealed the capability of nitrosoarenes to undergo one-electron oxidation or reduction reaction for a long time.However,the isolation and structural characterization of nitrosoarene radical compounds deviating the stabilization of transition-metal have not been achieved.Investigation on the reduction reaction of nitrosoarenes bearing steric demanding substituents has now revealed that the interaction of 2,6-dimesityl-1-nitroso-benzene(DmpNO)or 2,4,6-tri(tert-butyl)-1-nitroso-benzene(TtpNO)with KC8 and crypt-2,2,2 can produce the corresponding anion radical compound[K(crypt-2,2,2)][DmpNO](1)or[K(crypt-2,2,2)][TtpNO](2)in good isolated yield.Compounds 1 and 2 represent the first examples of isolable nitrosoarene radical compounds deviating the stabilization of transition-metal,and have been characterized by single-crystal X-ray diffraction study,electron paramagnetic resonance(EPR)spectroscopy,and elemental analysis.Theoretical study in collaboration with the characterization data revealed that the unpaired spin in[DmpNO]·-and[TtpNO]·-delocalizes on the nitroso and the central phenyl groups.     

Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

Electroanalytical Studies on Cobalt(II) Ion‐Selective Sensor of Polymeric Membrane Electrode and Coated Graphite Electrode Based on N2O2 Salen Ligands

Poly(vinyl chloride)‐based membranes of salen ligands, 2‐((E)‐((1R,2S)‐2‐((E)‐5‐tert‐butyl‐2‐hydroxybenzylideneamino)cyclohexylimino)methyl)‐4‐tert‐butyl phenol (S₁) and 2‐((E)‐((1R,2S)‐2‐((E)‐3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)cyclohexylimino)methyl)‐4,6‐di‐tert‐butylphenol (S₂) were fabricated and explored as cobalt(II) selective electrodes. The performance of the polymeric membrane electrode (PME) and coated graphite electrode (CGE) were compared and it was observed that CGE showed a wide working concentration range of 1.1×10^?8 to 1.0×10^?1 mol L^?1 with a limit of detection of 7.0×10^?9 mol L^?1 exhibiting the Nernstian slope 29.6 mV/decade of activity in the pH range 3.0–9.0. It was used for the determination of cobalt(II) ions in water, soil, beer, pharmaceutical samples and medicinal plants and would be used as an indicator electrode in potentiometric titration with EDTA.     

Synthese und Molekülstrukturen von N‐substituierten Diethylgallium‐2‐pyridylmethylamiden

Synthesis and Molekular Structures of N‐substituted Diethylgallium‐2‐pyridylmethylamides (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1a ) and (2‐pyridylmethyl)‐di(tert‐butyl)silylamine ( 1b ) form with triethylgallane the corresponding red adducts 2a and 2b via an additional nitrogen‐gallium bond. These oily compounds decompose during distillation. Heating under reflux in toluene leads to the elimination of ethane and the formation of the red oils of [(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido]diethylgallane ( 3a ) and [(2‐pyridylmethyl)‐di(tert‐butyl)silylamido]diethylgallane ( 3b ). In order to investigate the thermal stability solvent‐free 3a is heated up to 400 °C. The elimination of ethane is observed again and the C‐C coupling product N, N′‐Bis(diethylgallyl)‐1, 2‐dipyridyl‐1, 2‐bis(tert‐butyldimethylsilyl)amido]ethan ( 4 ) is found in the residue. Substitution of the silyl substituents by another 2‐pyridylmethyl group and the reaction of this bis(2‐pyridylmethyl)amine with GaEt₃ yield triethylgallane‐diethylgallium‐bis(2‐pyridylmethyl)amide ( 5 ). The metalation product adds immediately another equivalent of triethylgallane regardless of the stoichiometry. The reaction of GaEt₃ with 2‐pyridylmethanol gives quantitatively colorless 2‐pyridylmethanolato diethylgallane ( 6 ).     

Anionic lanthanide phenoxide complexes as novel single‐component initiators for the polymerization of ε‐caprolactone and trimethylene carbonate

The anionic lanthanide‐sodium‐2,6‐di‐tert‐butyl‐phenoxide complexes [Ln(OAr)₄][Na(DME)₃]·DME (Ln = Nd 1 (neodymium), Sm 2 (samarium), or Gd 3 (gadolium); DME = dimethoxyethane) were synthesized by the reaction of anhydrous LnCl₃ with 4 equiv of sodium‐2,6‐di‐tert‐butyl‐phenoxide NaOAr in high yields and structurally characterized. These complexes showed high catalytic activity in the ring‐opening polymerizations of ?‐caprolactone (?‐CL) and trimethylene carbonate (TMC). The catalytic activity profoundly depended on the lanthanide metals. The active order of Gd < Sm < Nd for the polymerization of ?‐CL and TMC was observed. The polymers obtained with these initiators all showed a unimodal molecular weight distribution, indicating that the [Ln(OAr)₄][Na(DME)₃]·DME anionic complexes could be used as single‐component initiators. The anionic complex was more efficient than the corresponding neutral complex, Ln(OAr)₃(THF)₂. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1210–1218, 2007